ABSTRACT
Skeletal muscles power movement. Deriving the forces produced by individual muscles has applications across various fields including biomechanics, robotics, and rehabilitation. Since direct in vivo measurement of muscle force in humans is invasive and challenging, its estimation through non-invasive methods such as electromyography (EMG) holds considerable appeal. This matrix, developed by the Consensus for Experimental Design in Electromyography (CEDE) project, summarizes recommendations on the use of EMG to estimate muscle force. The matrix encompasses the use of bipolar surface EMG, high density surface EMG, and intra-muscular EMG (1) to identify the onset of muscle force during isometric contractions, (2) to identify the offset of muscle force during isometric contractions, (3) to identify force fluctuations during isometric contractions, (4) to estimate force during dynamic contractions, and (5) in combination with musculoskeletal models to estimate force during dynamic contractions. For each application, recommendations on the appropriateness of using EMG to estimate force and justification for each recommendation are provided. The achieved consensus makes clear that there are limited scenarios in which EMG can be used to accurately estimate muscle forces. In most cases, it remains important to consider the activation as well as the muscle state and other biomechanical and physiological factors- such as in the context of a formal mechanical model. This matrix is intended to encourage interdisciplinary discussions regarding the integration of EMG with other experimental techniques and to promote advances in the application of EMG towards developing muscle models and musculoskeletal simulations that can accurately predict muscle forces in healthy and clinical populations.
ABSTRACT
The diversity in electromyography (EMG) techniques and their reporting present significant challenges across multiple disciplines in research and clinical practice, where EMG is commonly used. To address these challenges and augment the reproducibility and interpretation of studies using EMG, the Consensus for Experimental Design in Electromyography (CEDE) project has developed a checklist (CEDE-Check) to assist researchers to thoroughly report their EMG methodologies. Development involved a multi-stage Delphi process with seventeen EMG experts from various disciplines. After two rounds, consensus was achieved. The final CEDE-Check consists of forty items that address four critical areas that demand precise reporting when EMG is employed: the task investigated, electrode placement, recording electrode characteristics, and acquisition and pre-processing of EMG signals. This checklist aims to guide researchers to accurately report and critically appraise EMG studies, thereby promoting a standardised critical evaluation, and greater scientific rigor in research that uses EMG signals. This approach not only aims to facilitate interpretation of study results and comparisons between studies, but it is also expected to contribute to advancing research quality and facilitate clinical and other practical applications of knowledge generated through the use of EMG.
Subject(s)
Checklist , Consensus , Delphi Technique , Electromyography , Research Design , Electromyography/methods , Electromyography/standards , Checklist/standards , Humans , Research Design/standards , Reproducibility of ResultsABSTRACT
Muscular coordination enables locomotion and interaction with the environment. For more than 50 years electromyography (EMG) has provided insights into the central nervous system control of individual muscles or muscle groups, enabling both fine and gross motor functions. This information is available either at individual motor units (Mus) level or on a more global level from the coordination of different muscles or muscle groups. In particular, non-invasive EMG methods such as surface EMG (sEMG) or, more recently, spatial mapping methods (High-Density EMG - HDsEMG) have found their place in research into biomechanics, sport and exercise, ergonomics, rehabilitation, diagnostics, and increasingly for the control of technical devices. With further technical advances and a growing understanding of the relationship between EMG and movement task execution, it is expected that with time, especially non-invasive EMG methods will become increasingly important in movement sciences. However, while the total number of publications per year on non-invasive EMG methods is growing exponentially, the number of publications on this topic in journals with a scope in movement sciences has stagnated in the last decade. This review paper contextualizes non-invasive EMG development over the last 50 years, highlighting methodological progress. Changes in research topics related to non-invasive EMG were identified. Today non-invasive EMG procedures are increasingly used to control technical devices, where muscle mechanics have a minor influence. In movement science, however, the effect of muscle mechanics on the EMG signal cannot be neglected. This explains why non-invasive EMG's relevance in movement sciences has not developed as expected.
Subject(s)
Muscle, Skeletal , Sports , Electromyography/methods , Exercise , Locomotion , Muscle Contraction/physiology , Muscle, Skeletal/physiology , Sports/physiology , HumansABSTRACT
The analysis of single motor unit (SMU) activity provides the foundation from which information about the neural strategies underlying the control of muscle force can be identified, due to the one-to-one association between the action potentials generated by an alpha motor neuron and those received by the innervated muscle fibers. Such a powerful assessment has been conventionally performed with invasive electrodes (i.e., intramuscular electromyography (EMG)), however, recent advances in signal processing techniques have enabled the identification of single motor unit (SMU) activity in high-density surface electromyography (HDsEMG) recordings. This matrix, developed by the Consensus for Experimental Design in Electromyography (CEDE) project, provides recommendations for the recording and analysis of SMU activity with both invasive (needle and fine-wire EMG) and non-invasive (HDsEMG) SMU identification methods, summarizing their advantages and disadvantages when used during different testing conditions. Recommendations for the analysis and reporting of discharge rate and peripheral (i.e., muscle fiber conduction velocity) SMU properties are also provided. The results of the Delphi process to reach consensus are contained in an appendix. This matrix is intended to help researchers to collect, report, and interpret SMU data in the context of both research and clinical applications.
Subject(s)
Muscle, Skeletal , Research Design , Humans , Electromyography/methods , Muscle, Skeletal/physiology , Consensus , Motor Neurons/physiology , Action Potentials/physiologyABSTRACT
Surface electromyography (sEMG) has been the subject of thousands of scientific articles, but many barriers limit its clinical applications. Previous work has indicated that the lack of time, competence, training, and teaching is the main barrier to the clinical application of sEMG. This work follows up and presents a number of analogies, metaphors, and simulations using physical and mathematical models that provide tools for teaching sEMG detection by means of electrode pairs (1D signals) and electrode grids (2D and 3D signals). The basic mechanisms of sEMG generation are summarized and the features of the sensing system (electrode location, size, interelectrode distance, crosstalk, etc.) are illustrated (mostly by animations) with examples that teachers can use. The most common, as well as some potential, applications are illustrated in the areas of signal presentation, gait analysis, the optimal injection of botulinum toxin, neurorehabilitation, ergonomics, obstetrics, occupational medicine, and sport sciences. The work is primarily focused on correct sEMG detection and on crosstalk. Issues related to the clinical transfer of innovations are also discussed, as well as the need for training new clinical and/or technical operators in the field of sEMG.
Subject(s)
Muscle, Skeletal , Sports , Electrodes , Electromyography , Models, TheoreticalABSTRACT
High-density surface electromyography (HDsEMG) can be used to measure the spatial distribution of electrical muscle activity over the skin. As this distribution is associated with the generation and propagation of muscle fiber action potentials, HDsEMG is processed to extract information on regional muscle activation, muscle fiber characteristics and behaviour of individual motor units. This matrix, developed by the Consensus for Experimental Design in Electromyography (CEDE) project, summarizes recommendations on the use of HDsEMG in experimental studies. For each application, recommendations are included regarding electrode montage, electrode type and configuration, electrode location and orientation, data analysis, and interpretation. Cautions and reporting standards are also included. The steps of the Delphi process to reach consensus are contained in an appendix. This matrix is intended to help researchers when collecting, reporting, and interpreting HDsEMG data. It is hoped that this document will be used to generate new empirical evidence to improve how HDsEMG is used in research and in clinical applications.
Subject(s)
Muscle, Skeletal , Research Design , Consensus , Electrodes , Electromyography , Humans , Muscle, Skeletal/physiologyABSTRACT
INTRODUCTION: The aim of the study was to demonstrate the feasibility of a prototype for accelerometer-based guidance for percutaneous CT-guided punctures and compare it with free-hand punctures. MATERIAL AND METHODS: The prototype enabled alignment with the CT coordinate system and a wireless connectivity. Its feasibility was tested in a swine cadaver model: 20 out-of-plane device-assisted punctures performed without intermittent control scans (one-step punctures) were evaluated regarding deviation to target and difference between planned and obtained angle. Thereafter, 22 device-assisted punctures were compared with 20 free-hand punctures regarding distance to target, deviation from the planned angle, number of control scans and procedure time. Differences were compared with the Mann-Whitney U-test (p < .05). RESULTS: The one-step punctures revealed a deviation to target of 0.26 ± 0.37 cm (axial plane) and 0.21 ± 0.19 cm (sagittal plane) and differences between planned and performed puncture angles of 0.9 ± 1.09° (axial plane) and 1.15 ± 0.91° (sagittal planes). In the comparative study, device-assisted punctures showed a significantly higher accuracy, 0.20 ± 0.17 cm vs. 0.30 ± 0.21 cm (p < .05) and lower number of required control scans, 1.3 ± 1.1 vs. 3.7 ± 0.9 (p < .05) compared with free-hand punctures. CONCLUSION: The accelerometer-based device proved to be feasible and demonstrated significantly higher accuracy and required significantly less control scans compared to free-hand puncture.
Subject(s)
Punctures , Tomography, X-Ray Computed , Accelerometry , Animals , Needles , Swine , Tomography, X-Ray Computed/methodsABSTRACT
Consensus on the definition of common terms in electromyography (EMG) research promotes consistency in the EMG literature and facilitates the integration of research across the field. This paper presents a matrix developed within the Consensus for Experimental Design in Electromyography (CEDE) project, providing definitions for terms used in the EMG literature. The definitions for physiological and technical terms that are common in EMG research are included in two tables, with key information on each definition provided in a comment section. A brief outline of some basic principles for recording and analyzing EMG is included in an appendix, to provide researchers new to EMG with background and context for understanding the definitions of physiological and technical terms. This terminology matrix can be used as a reference to aid researchers new to EMG in reviewing the EMG literature.
Subject(s)
Muscle, Skeletal , Research Design , Consensus , Electromyography , HumansABSTRACT
With the growing number of people seeking medical advice due to low back pain (LBP), individualised physiotherapeutic rehabilitation is becoming increasingly relevant. Thirty volunteers were asked to perform three typical LBP rehabilitation exercises (Prone-Rocking, Bird-Dog and Rowing) in two categories: clinically prescribed exercise (CPE) and typical compensatory movement (TCM). Three inertial sensors were used to detect the movement of the back during exercise performance and thus generate a dataset that is used to develop an algorithm that detects typical compensatory movements in autonomously performed LBP exercises. The best feature combinations out of 50 derived features displaying the highest capacity to differentiate between CPE and TCM in each exercise were determined. For classifying exercise movements as CPE or TCM, a binary decision tree was trained with the best performing features. The results showed that the trained classifier is able to distinguish CPE from TCM in Bird-Dog, Prone-Rocking and Rowing with up to 97.7% (Head Sensor, one feature), 98.9% (Upper back Sensor, one feature) and 80.5% (Upper back Sensor, two features) using only one sensor. Thus, as a proof-of-concept, the introduced classification models can be used to detect typical compensatory movements in autonomously performed LBP exercises.
Subject(s)
Exercise Therapy , Low Back Pain , Algorithms , Humans , MovementABSTRACT
Wearable devices play an increasing role in the rehabilitation of patients with movement disorders. Although information about muscular activation is highly interesting, no approach exists that allows reliable collection of this information when the sensor is applied autonomously by the patient. This paper aims to demonstrate the proof-of-principle of an innovative sEMG sensor system, which can be used intuitively by patients while detecting their muscular activation with sufficient accuracy. The sEMG sensor system utilizes a multichannel approach based on 16 sEMG leads arranged circularly around the limb. Its design enables a stable contact between the skin surface and the system's dry electrodes, fulfills the SENIAM recommendations regarding the electrode size and inter-electrode distance and facilitates a high temporal resolution. The proof-of-principle was demonstrated by elbow flexion/extension movements of 10 subjects, proving that it has root mean square values and a signal-to-noise ratio comparable to commercial systems based on pre-gelled electrodes. Furthermore, it can be easily placed and removed by patients with reduced arm function and without detailed knowledge about the exact positioning of the sEMG electrodes. With its features, the demonstration of the sEMG sensor system's proof-of-principle positions it as a wearable device that has the potential to monitor muscular activation in home and community settings.
Subject(s)
Electromyography , Muscle, Skeletal/physiology , Wearable Electronic Devices , Elbow , Electrodes , Humans , MovementABSTRACT
This article addresses the potential clinical value of techniques based on surface electromyography (sEMG) in rehabilitation medicine with specific focus on neurorehabilitation. Applications in exercise and sport pathophysiology, in movement analysis, in ergonomics and occupational medicine, and in a number of related fields are also considered. The contrast between the extensive scientific literature in these fields and the limited clinical applications is discussed. The "barriers" between research findings and their application are very broad, and are longstanding, cultural, educational, and technical. Cultural barriers relate to the general acceptance and use of the concept of objective measurement in a clinical setting and its role in promoting Evidence Based Medicine. Wide differences between countries exist in appropriate training in the use of such quantitative measurements in general, and in electrical measurements in particular. These differences are manifest in training programs, in degrees granted, and in academic/research career opportunities. Educational barriers are related to the background in mathematics and physics for rehabilitation clinicians, leading to insufficient basic concepts of signal interpretation, as well as to the lack of a common language with rehabilitation engineers. Technical barriers are being overcome progressively, but progress is still impacted by the lack of user-friendly equipment, insufficient market demand, gadget-like devices, relatively high equipment price and a pervasive lack of interest by manufacturers. Despite the recommendations provided by the 20-year old EU project on "Surface EMG for Non-Invasive Assessment of Muscles (SENIAM)," real international standards are still missing and there is minimal international pressure for developing and applying such standards. The need for change in training and teaching is increasingly felt in the academic world, but is much less perceived in the health delivery system and clinical environments. The rapid technological progress in the fields of sensor and measurement technology (including sEMG), assistive devices, and robotic rehabilitation, has not been driven by clinical demands. Our assertion is that the most important and urgent interventions concern enhanced education, more effective technology transfer, and increased academic opportunities for physiotherapists, occupational therapists, and kinesiologists.
ABSTRACT
The general purpose of normalization of EMG amplitude is to enable comparisons between participants, muscles, measurement sessions or electrode positions. Normalization is necessary to reduce the impact of differences in physiological and anatomical characteristics of muscles and surrounding tissues. Normalization of the EMG amplitude provides information about the magnitude of muscle activation relative to a reference value. It is essential to select an appropriate method for normalization with specific reference to how the EMG signal will be interpreted, and to consider how the normalized EMG amplitude may change when interpreting it under specific conditions. This matrix, developed by the Consensus for Experimental Design in Electromyography (CEDE) project, presents six approaches to EMG normalization: (1) Maximal voluntary contraction (MVC) in same task/context as the task of interest, (2) Standardized isometric MVC (which is not necessarily matched to the contraction type in the task of interest), (3) Standardized submaximal task (isometric/dynamic) that can be task-specific, (4) Peak/mean EMG amplitude in task, (5) Non-normalized, and (6) Maximal M-wave. General considerations for normalization, features that should be reported, definitions, and "pros and cons" of each normalization approach are presented first. This information is followed by recommendations for specific experimental contexts, along with an explanation of the factors that determine the suitability of a method, and frequently asked questions. This matrix is intended to help researchers when selecting, reporting and interpreting EMG amplitude data.
Subject(s)
Consensus , Delphi Technique , Electromyography/methods , Electromyography/standards , Muscle, Skeletal/physiology , Research Design/standards , Adult , Electrodes , Female , Humans , Isometric Contraction/physiology , MaleABSTRACT
BACKGROUND: Neuromuscular disorders e.g. spinal muscular atrophy and stroke have a negative impact on functional movement capability. These disorders affect lower and upper motor neurons respectively. METHODS: In this study high spatial resolution electromyography was used to record the motor unit activity in 3 groups: healthy subjects, a spinal muscular atrophy group and a stroke group. 7 clinically sensitive parameters were used to analyze the activation patterns of a few motor units. FINDINGS: In the case of spinal muscular atrophy there was no effect on motor unit activation but on their number. Stroke was characterized by fewer active motor units and a significantly reduced firing rate with low variability. INTERPRETATION: The results suggest, that for stroke, information from the brain is modified thereby resulting in motor units firing at their natural frequency. Thus, high spatial resolution electromyography and the chosen parameters facilitate non-invasive, objective differentiation and analysis of the activation patterns of motor units in neuromuscular disorders.
Subject(s)
Motor Neurons/pathology , Muscle, Skeletal/physiopathology , Muscular Atrophy, Spinal/pathology , Muscular Atrophy, Spinal/physiopathology , Stroke/pathology , Stroke/physiopathology , Adult , Electromyography , Female , Humans , Male , MovementABSTRACT
Coordinated activation of muscles is the basis for human locomotion. Impaired muscular activation is related to poor movement performance and disability. To restore movement performance, information about the subject's individual muscular activation is of high relevance. Surface electromyography (sEMG) allows the pain-free assessment of muscular activation and many ready-to-use technologies are available. They enable the usage of sEMG measurements in several applications. However, due to the fact that in most rehabilitation applications dynamic conditions are analyzed, the correct interpretation of sEMG signals remains difficult which hinders the spread of sEMG in clinical applications. From biomechanics it is well-known that the sEMG signal depends on muscle fiber length, contraction velocity, contraction type and on the muscle's biomechanical moment. In non-isometric conditions these biomechanical factors have to be considered when analyzing sEMG signals. Additionally, the central nervous system control strategies used to activate synergistic and antagonistic muscles have to be taken into consideration. These central nervous system activation strategies are rarely known in physiology and are hard to manage in pathology. In this perspective report we discuss how the consideration of biomechanical factors leads to more reliable information extraction from sEMG signals and how the limitations of sEMG can be overcome in dynamic conditions. This is a prerequisite if the use of sEMG in rehabilitation applications is to extend. Examples will be given showing how the integration of biomechanical knowledge into the interpretation of sEMG helps to identify the central nervous system activation strategies involved and leads to relevant clinical information.
ABSTRACT
The Consensus for Experimental Design in Electromyography (CEDE) project is an international initiative which aims to guide decision-making in recording, analysis, and interpretation of electromyographic (EMG) data. The quality of the EMG recording, and validity of its interpretation depend on many characteristics of the recording set-up and analysis procedures. Different electrode types (i.e., surface and intramuscular) will influence the recorded signal and its interpretation. This report presents a matrix to consider the best electrode type selection for recording EMG, and the process undertaken to achieve consensus. Four electrode types were considered: (1) conventional surface electrode, (2) surface matrix or array electrode, (3) fine-wire electrode, and (4) needle electrode. General features, pros, and cons of each electrode type are presented first. This information is followed by recommendations for specific types of muscles, the information that can be estimated, the typical representativeness of the recording and the types of contractions for which the electrode is best suited. This matrix is intended to help researchers when selecting and reporting the electrode type in EMG studies.
Subject(s)
Electromyography/methods , Consensus , Electrodes/standards , Electromyography/instrumentation , Electromyography/standards , Humans , Muscle, Skeletal/physiologyABSTRACT
Spastic impaired limb function is a frequent result of brain lesions. Although its assessment is important for clinical and therapeutical management, it still lacks an objective measure to quantify the functionality of the affected limb. The present paper reports a procedure based on the muscular activation recorded by Surface Electromyography (sEMG), which enables the assessment of the degree of spastic impairment. 15 healthy subjects and 7 patients with impaired upper limb function due to spasticity were included in the study. SEMG was recorded from the biceps and brachioradialis during active elbow extension at different movement velocities. The spastic impairment was clinically assessed by the Tardieu-Test and the Wolf Motor Function Test. Results of the clinical assessment and parameter values quantifying the muscular activation at different joint positions and movement velocities have been set in relation to one another. The results show that spastic impairment leads to a changed correlation between the muscular activation and movement velocity as well as to a changed inter-muscular co-ordination of biceps and brachioradialis. These changes, reflected in the sEMG, can be quantified by 5 newly introduced parameters. This way could allow the assessment of spastic impairment in the context of functional everyday tasks, for the first-time.
Subject(s)
Movement , Muscle Spasticity/physiopathology , Muscle, Skeletal/physiology , Algorithms , Arm/physiopathology , Biomechanical Phenomena , Cerebral Palsy/physiopathology , Elbow/physiopathology , Elbow Joint/physiopathology , Electromyography , Equipment Design , Forearm/physiopathology , Humans , Signal Processing, Computer-Assisted , Stroke/physiopathologyABSTRACT
BACKGROUND: Moderate preterm infants (MPI) and late preterm infants (LPI) account for the majority of children born preterm. Up to 5% of MPI and LPI are estimated to manifest neurodevelopmental impairments. However, information about normal early motor development in these patients is lacking. AIM: To find characteristic patterns for motor development in the first four months of life among MPI and LPI without risk factors for developmental impairment by using accelerometry of spontaneous movements. STUDY DESIGN: Prospective and observational study. SUBJECTS: Twenty-three MPI and LPI (9 female, 14 male) without known risk factors for neurodevelopmental impairment were included in this study. Spontaneous movements were measured by accelerometry at the time of hospital discharge (mean: 36.6wks postmenstrual age (PMA)) and at the corrected age of three months (mean: 53.0wks PMA). OUTCOME MEASURES: Motor development was described by analyzing 36 parameters calculated from the acceleration signal. Normal neurodevelopmental outcome was confirmed by Bayley Scales of Infant Development at the corrected age of two years. RESULTS: Statistically significant differences (pâ¯<â¯0.05) between the two measurements could be shown in 26 out of the 36 parameters. Striking changes in motor development were an increase in acceleration and variability of the spontaneous movements, the main criterion for analyzing spontaneous movements. Furthermore, the regularity of spontaneous movements increased significantly. CONCLUSION: Characteristic patterns of normal motor development in MPI and LPI can be identified and provide a basis for future investigations aiming at the early detection of abnormal motor development for this specific patient group.
Subject(s)
Infant, Premature/physiology , Movement , Abnormal Involuntary Movement Scale , Acceleration , Accelerometry/methods , Female , Humans , Infant, Newborn , MaleABSTRACT
End-effector-based robotic systems are, in particular, suitable for extending physical therapy in stroke rehabilitation. An adequate therapy and thus the recovery of movement can only be guaranteed if the physiological muscular activation and movement performance are influenced as little as possible by the robot itself. Yet, this relation has not been investigated in the literature. Therefore, 20 healthy subjects performed free and robot-assisted exercises under different control settings supported by an end-effector-based system. The control settings differed concerning changes in the end-effector velocity and the stiffness of the robot joints. During the exercises, data from inertial measurement unit sensors, robot kinematics, and surface electromyography were collected for the upper limbs. The results showed an increase in muscular activity during robot-assisted movements compared to freely performed movements and also differences in movement performance. The change of the control setting influenced the muscular activation, but not the movement performance. The results of the study revealed that the robot could not be regarded as only a passive element. This should be kept in mind in future robotic rehabilitation systems in order to reduce the influences of the robot itself and thus to optimize the therapy.
Subject(s)
Exercise/physiology , Movement/physiology , Muscle, Skeletal/physiology , Psychomotor Performance/physiology , Robotics , Adult , Algorithms , Biomechanical Phenomena , Electromyography , Female , Healthy Volunteers , Humans , Male , Middle Aged , Signal Processing, Computer-Assisted , Stroke Rehabilitation/instrumentation , Upper Extremity/physiology , Young AdultABSTRACT
BACKGROUND: Alterations in the activity of the lumbar erector spinae (LES) muscles on both sides of the spine have been inconsistently reported in patients with specific low back pain (sLBP) after measuring the muscular activity with surface electromyography (sEMG). It also remains unclear whether these alterations in LES activity can be related to the functional level of patients with sLBP. RESEARCH QUESTION: This study investigated the LES activity in patients with sLBP during activities of daily living (ADL) which included dynamic and static movement tasks. Moreover, the alterations in LES activity were correlated with the first seven questions of the Zurich Claudication Questionnaire (ZCQ-SS). METHODS: Thirty patients with specific LBP and twenty healthy subjects were recruited to perform five ADLs including 'static waist flexion', 'sit to stand',' 30-seconds standing', '6-minutes walking' and 'climbing stairs'. sEMG sensors were mounted on the left and right LES muscles. The integrated EMG (IEMG) was calculated from the preprocessed sEMG data as statistical comparison criteria. RESULTS: LES activity was significantly higher in patients during 'sit to stand',' 30-seconds standing' and 'climbing stairs' and significantly lower during 'static waist flexion' compared to healthy controls. All tasks showed a significant correlation with the ZCQ-SS score except for '6-minutes walking', whereby LES activity and ZCQ-SS score correspondingly increased during 'sit to stand' and 'climbing stairs' and the LES activity decreased with an increasing ZCQ-SS score during 'static waist flexion' and' 30-seconds standing'. SIGNIFICANCE: There was a high correlation between alterations in LES activity and the level of functionality in LBP patients. However, the LES activity showed an opposite behavior during static and dynamic movement tasks. The methodology presented can be a useful tool for quantifying improvements in functionality after rehabilitation processes.