Precision Medicine-A Demand Signal for Genomics Education.

Pressed by the accumulating knowledge in genomics and the proven success of the translation of cancer genomics to clinical practice in oncology, the Obama administration unveiled a $215 million commitment for the Precision Medicine Initiative (PMI) in 2016, a pioneering research effort to improve health and treat disease using a new model of patient-powered research. The objectives of the initiative include more effective treatments for cancer and other diseases, creation of a voluntary national research cohort, adherence to privacy protections for maintaining data sharing and use, modernization of the regulatory framework, and forging public-private partnerships to facilitate these objectives. Specifically, the DoD Military Health System joined other agencies to execute a comprehensive effort for PMI. Of the many challenges to consider that may contribute to the implementation of genomics-lack of familiarity and understanding, poor access to genomic medicine expertise, needs for extensive informatics and infrastructure to integrate genomic results, privacy and security, and policy development to address the unique requirements of military medical practice-we will focus on the need to establish education in genomics appropriate to the provider's responsibilities. Our hypothesis is that there is a growing urgency for the development of educational experiences, formal and informal, to enable clinicians to acquire competency in genomics commensurate with their level of practice. Several educational approaches, both in practice and in development, are presented to inform decision-makers and empower military providers to pursue courses of action that respond to this need.

In vivo performance of combinations of autograft, demineralized bone matrix, and tricalcium phosphate in a rabbit femoral defect model.

Large bone defects may be treated with autologous or allogeneic bone preparations. Each treatment has advantages and disadvantages; therefore, a clinically viable option for treating large (e.g., gap) bone defects may be a combination of the two. In the present study, bone repair was determined with combinations of autografts, allografts, and synthetic bone grafts using an established rabbit femoral defect model. Bilateral unicortical femoral defects were surgically prepared and treated with combinatorial bone grafts according to one of seven treatment groups. Recipient sites were retrieved at six weeks. Cellular/tissue responses and new bone formation were assessed by histology and histomorphometry. Histological analysis images indicated neither evidence of inflammatory, immune responses, tissue necrosis, nor osteolysis. Data suggested co-integration of implanted agents with host and newly formed bone. Finally, the histomorphometric data suggested that the tricalcium phosphate-based synthetic bone graft substitute allowed new bone formation that was similar to the allograft (i.e., demineralized bone matrix, DBM).

Demineralized bone matrix in bone repair: history and use.

Demineralized bone matrix (DBM) is an osteoconductive and osteoinductive commercial biomaterial and approved medical device used in bone defects with a long track record of clinical use in diverse forms. True to its name and as an acid-extracted organic matrix from human bone sources, DBM retains much of the proteinaceous components native to bone, with small amounts of calcium-based solids, inorganic phosphates and some trace cell debris. Many of DBM's proteinaceous components (e.g., growth factors) are known to be potent osteogenic agents. Commercially sourced as putty, paste, sheets and flexible pieces, DBM provides a degradable matrix facilitating endogenous release of these compounds to the bone wound sites where it is surgically placed to fill bone defects, inducing new bone formation and accelerating healing. Given DBM's long clinical track record and commercial accessibility in standard forms and sources, opportunities to further develop and validate DBM as a versatile bone biomaterial in orthopedic repair and regenerative medicine contexts are attractive.

Bone regeneration in a rabbit critical-sized calvarial model using tyrosine-derived polycarbonate scaffolds.

Porous three-dimensional tyrosine-derived polycarbonate (TyrPC) scaffolds with a bimodal pore distribution were fabricated to mimic bone architecture using a combination of salt-leaching and phase separation techniques. TyrPC scaffolds degraded in register with bone regeneration during the 6-week study period and compressive moduli of the scaffolds were maintained >0.5 MPa at 6 weeks of incubation in PBS at 37 °C. The TyrPC scaffolds either unsupplemented or supplemented with recombinant human bone morphogenetic protein-2 (rhBMP-2) were implanted in a rabbit calvarial critical-sized defect (CSD) model and the TyrPC scaffolds treated with rhBMP-2 or TyrPC coated with calcium phosphate scaffold alone promoted bone regeneration in a rabbit calvarial CSD at 6 weeks postimplantation. A synthetic TyrPC polymeric scaffold either without a biological supplement or with a minimal dose of rhBMP-2 induced bone regeneration comparable to a commercially available bone graft substitute in a nonrodent CSD animal model.

Fiber-reinforced calcium phosphate cement formulations for cranioplasty applications: a 52-week duration preclinical rabbit calvaria study.

The in vivo tissue response to a newly developed fiber-reinforced calcium phosphate cement (CPC) formulation was assessed using a well-established rabbit calvarial defect model. Bilateral subcritical sized (8-mm diameter) defects were surgically created in the parietal bones of each rabbit (a total of 48 rabbits), and randomized to be filled with either the new fiber-reinforced formulation, a conventional CPC (positive control), or left unfilled (negative control). The implant sites were subsequently retrieved after 12, 24, and 52 weeks postsurgery. Each specimen, including the parietal bone craniotomy and underlying brain, were recovered at necropsy and the tissue responses were assessed by histology. The resulting histological slides indicated that there was no evidence of severe inflammatory responses or osteolysis. The data showed new dural and pericranial bone formation along the implants, as well as excellent bone-to-implant interfaces in all of the CPC-filled defects. These results suggest that the biologic response to the new fiber-reinforced CPC formulations and conventional nonreinforced CPC are very similar, and both demonstrate excellent biocompatibility as well as an overall osteophylic response.

Osteoblast growth and bone-healing response to three-dimensional poly(ε-caprolactone fumarate) scaffolds.

Poly(ε-caprolactone fumarate) (PCLF) scaffold formulations were assessed as a delivery system for recombinant human bone morphogenetic protein (rhBMP-2) for bone tissue engineering. The formulations included PCLF with combinations of poly(vinyl alcohol) (PVA) and hydroxyapatite (HA). The assessments included in vitro and in vivo assays. In vitro assays validated cell attachment using a pre-osteoblast cell line (MC3T3-E1). Additionally, in vitro release profiles of rhBMP-2 from PCLF scaffolds were determined up to 21 days. The data suggested that PCLF incorporated with PVA and HA accelerated rhBMP-2 release and that the released protein was bioactive. For the in vivo study, a critical-sized defect (CSD) model in rabbit calvaria was used to test PCLF scaffolds. At 6 weeks post-implantation, significantly more bone formation was measured in PCLF scaffolds containing rhBMP-2 than in scaffolds without rhBMP-2. In conclusion, we demonstrated that PCLF delivered biologically active rhBMP-2, promoted bone healing in a CSD and has potential as a bone tissue engineering scaffold.

Osteoblast differentiation in vitro and in vivo promoted by Osterix.

C3H10T1/2/Osx, a stably transfected cell line with Osterix (Osx), was produced and chondrocytic and osteoblastic differentiation were studied in vitro. Osx promoted osteoblastic lineage that was dexamethasone dependent. Furthermore, in vivo, Osx induced ectopic mineralization in a heterotopic mouse muscle model. Skeletogenesis involves a cascade of molecular activities sequentially performed by osteoblasts and chondroblasts. A transcriptional factor gene Osx appears to influence cell disposition toward the chondrocytic or osteoblastic phenotype and therefore may be an important signaling cue for bone formation. Understanding the molecular conditions involved with Osx promoted osteoblast differentiation will facilitate therapeutic applications of Osx. Consequently, the objective of this study was to investigate chondrocytic and osteoblastic phenotype differentiation using an Osx plasmid DNA exploiting both in vitro and in vivo methodologies. In vitro, a stably transfected C3H10T1/2/Osx cell line was established and promotion of either an osteoblast or chondroblast phenotype was performed by selectively introducing dexamethasone (dex) and assaying mRNA content and phenotype markers. In vivo, a mouse muscle model was used to determine heterotopic ossification using designated Osx plasmid DNA doses incorporated in a (50:50 Poly (D,L-lactide-co-glycolide) (i.e., PLGA) 3D scaffold. Histological assessment was used to determine implant responses. Quantitative real-time polymerase chain reaction (q-RT-PCR) showed a significant increase in mRNA expression of osteocalcin (Ocn), Runx2, osteonectin (On) and osteopontin (Op) (p < 0.05) in the C3H10T1/2/Osx cells compared to the empty vector transfected cell control. At day 21, mineralization was demonstrated in the cultures of C3H10T1/2/Osx exposed to dex, but neither in cultures lacking dex nor controls. In the absence of dex, C3H10T1/2/Osx cells revealed a significantly higher expression of Sox9 and Aggrecan (Agc). In vivo, 80 microg of Osx plasmid DNA induced heterotopic mineralization 4 weeks following implantation in a mouse muscle model and the effect was dependent on the Osx plasmid DNA dose delivered in the PLGA scaffold. Using a non-committed cell line (C3H10T1/2), cell differentiation to an osteoblast phenotype appears to be dependent upon an interaction between intracellular events initiated by the transcriptional factor Osx and the presence of dex. The in vivo findings suggest Osx may promote osteoblast differentiationand mineralization at a heterotopic site.

Hemostatic and anesthetic efficacy of 4% articaine HCl with 1:200,000 epinephrine and 4% articaine HCl with 1:100,000 epinephrine when administered intraorally for periodontal surgery.

BACKGROUND: The objective of this double-masked, randomized, multicenter crossover study was to compare the efficacy of 4% articaine HCl with 1:100,000 epinephrine (A100) to 4% articaine HCl with 1:200,000 epinephrine (A200) for providing effective local anesthesia and hemostasis for periodontal surgery. METHODS: Anesthetic efficacy was based on patient self-report and lack of need for reinjection during the surgical procedures. Hemostatic properties of the formulations were compared using ratings of the surgeons' ability to visualize the surgical field and expectation for bleeding. The volume of blood collected during each surgical session also was measured and compared. RESULTS: Forty-two adult subjects (26 males and 16 females, mean age 46.3 +/- 9.7 years) diagnosed with moderate to severe periodontal disease requiring local anesthesia for matched bilateral periodontal surgery were enrolled and completed the study. Subjects reported satisfactory surgical anesthesia following the A100 and A200 formulations; no supplemental local anesthesia was administered. Significant differences between the A100 and A200 treatments were found for the surgeons' ability to visualize the surgical field (rated as clear 83.3% of the time with A100 and 59.5% of the time with A200; P = 0.008), bleeding expectation (rated as equal to or better than expected 85.7% of the time with A100 and 71.4% of the time with A200; P = 0.034), and volume of blood loss (54.9 +/- 36.0 ml for A100 and 70.2 +/- 53.0 ml for A200; P = 0.018). Sixteen patients experienced 27 mild or moderate adverse events; the most common were postoperative pain (nine patients) and swelling (eight patients). Six adverse events may have been related to treatment. The frequency of adverse events did not vary between formulations. CONCLUSIONS: For patients undergoing periodontal surgery, 4% articaine anesthetic formulations containing epinephrine (1:100,000 or 1:200,000) provided excellent surgical pain control. For patients who can tolerate higher amounts of epinephrine, the 4% articaine 1:100,000 epinephrine formulation had the additional therapeutic advantage of providing better visualization of the surgical field and less bleeding.

Fracture healing in the elderly patient.

Clinical experience gives rise to the impression that there are differences in fracture healing in different age groups. It is evident that fractures heal more efficiently in children than in adults. However, minimal objective knowledge exists to evaluate this assumption. Temporal, spatial, and cellular quantitative and qualitative interrelationships, as well as signaling molecules and extracellular matrix have not been comprehensively and adequately elucidated for fracture healing in the geriatric skeleton. The biological basis of fracture healing will provide a context for revealing the pathophysiology of delayed or even impaired bone regeneration in the elderly. We will summarize experimental studies on age-related changes at the cellular and molecular level that will add to the pathophysiological understanding of the compromised bone regeneration capacity believed to exist in the elderly patient. We will suggest why this understanding would be useful for therapeutics focused on bone regeneration, in particular fracture healing at an advanced age.

Three-dimensional biocompatible ascorbic acid-containing scaffold for bone tissue engineering.

A biodegradable, biocompatible, ascorbic acid-containing three-dimensional polyurethane matrix was developed for bone tissue-engineering scaffolds. This matrix was synthesized with lysine-di-isocyanate (LDI), ascorbic acid (AA), glycerol, and polyethylene glycol (PEG). LDI-glycerol-PEG-AA prepolymer when reacted with water foamed with the liberation of CO(2) to provide a pliable, spongy urethane polymer with pore diameters of 100 to 500 microm. The LDI-glycerol-PEG-AA matrix degraded in aqueous solution and yielded lysine, glycerol, PEG, and ascorbic acid as breakdown products. The degradation products did not significantly affect the solution pH. The LDI-glycerol-PEG-AA matrix can be fabricated into diverse scaffold dimensions and the physicochemical properties of the polymer network supported in vitro cell growth. Green fluorescent protein-transgenic mouse bone marrow cells (GFP-MBMCs) attached to the polymer matrix and remained viable, and the cells became confluent cultures. Furthermore, ascorbic acid released from LDI-glycerol-PEG-AA matrix stimulated cell proliferation, type I collagen, and alkaline phosphatase synthesis in vitro. Cells grown on LDI-glycerol-PEG-AA matrix did not differ phenotypically from cells grown on tissue culture polystyrene plates as assessed by cell growth, expression of mRNA for collagen type I, and transforming growth factor beta(1). These observations suggest that AA-containing polyurethane may be useful in bone tissue-engineering applications.

A biodegradable polyurethane-ascorbic acid scaffold for bone tissue engineering.

A novel, nontoxic, biodegradable, sponge-like polyurethane scaffold was synthesized from lysine-di-isocyanate (LDI) and glycerol. Ascorbic acid (AA) was copolymerized with LDI-glycerol. Our hypothesis was that the AA-containing polymer foam would enhance the biological activity of the osteoblastic precursor cell (OPCs). The LDI-glycerol-AA matrix degraded in aqueous solution to the nontoxic products of lysine, glycerol, and AA. The degradation products did not significantly affect the solution pH. The physical properties of the polymer network supported the cell growth in vitro. Mouse OPCs attached to the polymer matrix and remained viable. OPCs produced multilayered confluent cultures, a characteristic typical of bone cells. Furthermore, AA release stimulated cell proliferation, type I collagen, and alkaline phosphatase synthesis. Cells grown on the LDI-glycerol-AA matrix also showed an enhancement of mRNA expression for pro-alpha1 (I) collagen and transforming growth factor-alpha1 after 1 week. Data were tested for significance with an analysis of variance model and multiple comparison test (Fisher's Protected Least Significant Difference) at p < or = 0.05. The observations suggest that AA-containing polyurethane may be useful in bone tissue engineering applications.

Zinc ligands in an astacin family metalloprotease meprin A.

A conserved tyrosine residue in the 'astacin family' of metalloproteases is one of five ligands proposed to coordinate zinc at the active site. Site-directed mutagenesis of the conserved Tyr (Y226) of recombinant mouse meprin alpha was used to test the hypothesis that this residue is essential for zinc binding and enzymatic activity. In addition, another proposed zinc binding ligand, H167, in the conserved (HEXXH) zinc binding motif of the meprin alpha protease domain was replaced by an alanine residue. Both mutants were expressed and secreted with the same subunit mass as wild type (90 kDa). The Y226F mutant retained the capacity to oligomerize to higher covalently and noncovalently-linked oligomers as the wild type, whereas H167A was predominantly a monomer. The kcat/Km for Y226F against a fluorgenic bradykinin substrate analog was approximately 15% of the wild type, while the H167A mutant had no detectable activity. Both Y226F and H167A were more susceptible to extensive degradation by trypsin compared with the wild-type protein. The zinc content in the wild-type and Y226F mutant proteins were similar, one molecule of zinc per subunit. The results indicate that Y226 is not essential for zinc binding, but Y226 and H167 are essential for full enzymatic activity and stability of the metalloproteinase.