Protonated Z-scheme CdS-covalent organic framework heterojunction with highly efficient photocatalytic hydrogen evolution.

The low efficiency of photocatalytic hydrogen production from water is mainly suffer from limited light absorption, charge separation and water delivery to the active centers. Herein, an inorganic-organic Z-scheme heterojunction (CdS-COF-Ni) is constructed by in-situ growth of CdS nanosheets on the porphyrin-based covalent organic framework with nickel ions (COF-Ni) in the porphyrin centers. A built-in electric field is formed at the interface, which accelerates the separation and transfer of photogenerated charges. Moreover, through the surface protonation treatment in ascorbic acid (AC) solution, the hydrophilicity of the obtained composite is obviously increased and facilitates the transport of water molecules to the photocatalytic centers. Under the synergistic effect of the interfacial interaction and surface protonation treatment, the photocatalytic hydrogen production rate is optimized to be 18.23 mmol h-1 g-1 without adding any cocatalysts, which is 21 times that of CdS. After a series of photoelectrochemical measurements, in situ X-ray photoelectron spectroscopy (XPS) analysis, and density functional theory (DFT) calculations, it is found that the photocatalytic charge transfer pathway conforms to the Z-scheme mechanism, which not only greatly accelerates the separation and transfer of photogenerated charges, but also retains a high reduction capacity for water splitting. This work offers a good strategy for constructing highly efficient organic-inorganic heterojunctions for water splitting.

The Application Potential of Artificial Intelligence and Numerical Simulation in the Research and Formulation Design of Drilling Fluid Gel Performance.

Drilling fluid is pivotal for efficient drilling. However, the gelation performance of drilling fluids is influenced by various complex factors, and traditional methods are inefficient and costly. Artificial intelligence and numerical simulation technologies have become transformative tools in various disciplines. This work reviews the application of four artificial intelligence techniques-expert systems, artificial neural networks (ANNs), support vector machines (SVMs), and genetic algorithms-and three numerical simulation techniques-computational fluid dynamics (CFD) simulations, molecular dynamics (MD) simulations, and Monte Carlo simulations-in drilling fluid design and performance optimization. It analyzes the current issues in these studies, pointing out that challenges in applying these two technologies to drilling fluid gelation performance research include difficulties in obtaining field data and overly idealized model assumptions. From the literature review, it can be estimated that 52.0% of the papers are related to ANNs. Leakage issues are the primary concern for practitioners studying drilling fluid gelation performance, accounting for over 17% of research in this area. Based on this, and in conjunction with the technical requirements of drilling fluids and the development needs of drilling intelligence theory, three development directions are proposed: (1) Emphasize feature engineering and data preprocessing to explore the application potential of interpretable artificial intelligence. (2) Establish channels for open access to data or large-scale oil and gas field databases. (3) Conduct in-depth numerical simulation research focusing on the microscopic details of the spatial network structure of drilling fluids, reducing or even eliminating data dependence.

Emerging electrospinning platform toward nanoparticle to single atom transformation for steering selectivity in ammonia synthesis.

The rising top-down synthetic methodologies for transition metal single-atom catalysts (SACs) require controlled movement of metal atoms through the substrates; however, their direct transportation towards the ideal carrier remains a huge challenge. Herein, we showed a "top down" strategy for Co nanoparticles (NPs) to Co SA transformation by employing electrospun carbon nanofibers (CNFs) as atom carriers. Under high-temperature conditions, the Co atoms migrate from the surfaces of Co NPs and are then anchored by the surrounding carbon to form a Co-C3O1 coordination structure. The synthesized Co SAs/CNF electrocatalyst exhibits excellent electrocatalytic nitrate reduction reaction (NO3RR) activity with an NH3 yield of 0.79 mmol h-1 cm-2 and Faraday efficiency (FE) of 91.3% at -0.7 V vs. RHE in 0.1 M KNO3 and 0.1 M K2SO4 electrolytes. The in situ electrochemical characterization suggests that the NOH pathway is preferred by Co SAs/CNFs, and *NO hydrogenation and deoxygenation easily occur on Co SAs due to the small adsorption energy between Co SAs and *NO, as calculated by theoretical calculations. It is revealed that a small energy barrier (0.45 eV) for the rate determining step (RDS) ranges from *NO to *NOH and a strong capability for inhibiting hydrogen evolution (HER) significantly promotes the NH3 selectivity and activity of Co SAs/CNFs.

Volatile guest molecule mediated strategy to convert covalent organic framework into nitrogen, sulfur-doped carbon as metal-free oxygen reduction electrocatalysts.

Covalent organic framework (COF) derived metal-free carbon materials have emerged as promising electrocatalysts for the oxygen reduction reaction (ORR). Herein, a volatile guest molecule mediated-pyrolysis strategy was explored on a designed thiophene-rich and imine-linked COF. Through the modulation of guest mediators (iodine and sulfur), the properties of the as-obtained carbon materials can be well regulated. The optimized nitrogen and sulfur dual-doped carbon electrocatalyst demonstrates remarkable ORR activity with a half-wave potential of 0.87 V and impressive durability, with only an 8% current loss over 21 h. The corresponding assembled zinc-air battery has a comparable power density (60 mW cm-2) to that of the commercial Pt/C. It is proposed that the coexistence of the guest mediators iodine and sulfur in the channels of COFs could prevent the loss of N species. The enhanced N content and N/S ratio are assumed to be responsible for the ORR performance. This study puts forward a novel strategy to prepare COF-derived carbon materials mediated by volatile guest molecules, which may provide new insights into the development of metal-free ORR catalysts.

An Amphiphilic Multiblock Polymer as a High-Temperature Gelling Agent for Oil-Based Drilling Fluids and Its Mechanism of Action.

Oil-based drilling fluids are widely used in challenging wells such as those with large displacements, deepwater and ultra-deepwater wells, deep wells, and ultra-deep wells due to their excellent temperature resistance, inhibition properties, and lubrication. However, there is a challenging issue of rheological deterioration of drilling fluids under high-temperature conditions. In this study, a dual-amphiphilic segmented high-temperature-resistant gelling agent (HTR-GA) was synthesized using poly fatty acids and polyether amines as raw materials. Experimental results showed that the initial decomposition temperature of HTR-GA was 374 °C, indicating good thermal stability. After adding HTR-GA, the emulsion coalescence voltage increased for emulsions with different oil-to-water ratios. HTR-GA could construct a weak gel structure in oil-based drilling fluids, significantly enhancing the shear-thinning and thixotropic properties of oil-based drilling fluids under high-temperature conditions. Using HTR-GA as the core, a set of oil-based drilling fluid systems with good rheological properties, a density of 2.2 g/cm3, and temperature resistance up to 220 °C were constructed. After aging for 24 h at 220 °C, the dynamic shear force exceeded 10 Pa, and G' exceeded 7 Pa, while after aging for 96 h at 220 °C, the dynamic shear force exceeded 4 Pa, and G″ reached 7 Pa. The synthesized compound HTR-GA has been empirically validated to significantly augment the rheological properties of oil-based drilling fluids, particularly under high-temperature conditions, showcasing impressive thermal stability with a resistance threshold of up to 220 °C. This notable enhancement provides critical technical reinforcement for progressive exploration endeavors in deep and ultra-deep well formations, specifically employing oil-based drilling fluids.

Dual-phase B-doped FeCoNiCuPd high-entropy alloys for nitrogen electroreduction to ammonia.

Dual-phase B-doped FeCoNiCuPd high-entropy alloy (DP-B-HEA) nanoparticles were synthesized via a strategy involving thermodynamically driven solid-phase diffusion. The DP-B-HEA/CNFs showed an outstanding electrochemical N2 reduction reaction (NRR) performance with an ammonia yield of 24.8 µmol h-1 cm-2 and NH3 faradaic efficiency (FE) of 39.2%. The optimized electronic structures of the HEA resulting from B doping led to the enhanced NRR activity and selectivity.

Constructing single atom sites on bipyridine covalent organic frameworks for selective electrochemical production of H2O2.

We developed a series of single atom catalysts (SACs) anchored on bipyridine-rich COFs. By tuning the active metal center, the optimal Py-Bpy-COF-Zn shows the highest selectivity of 99.1% and excellent stability toward H2O2 production via oxygen reduction, which can be attributed to the high *OOH dissociation barrier indicated by the theoretical calculations. As a proof of concept, it acts as a cathodic catalyst in a homemade Zn-air battery, together with efficient wastewater treatment.

Solid-phase synthesis of ultra-small CuMo solid solution alloy for efficient electroreduction CO2-to-C2+ production.

We report a fascinating solid-phase synthesis of ultra-small CuMo solid solution alloy nanoclusters (2.1 nm) anchored on electrospun carbon nanofibers (CuMo/CNFs). By tuning the weight ratio of Cu and Mo, the optimized Cu2Mo1/CNFs achieves excellent CO2RR performance with a high faradaic efficiency (FE) of 84.5% for C2+ products and an FEethanol of 75.7%. In situ characterization demonstrates that the Cu2Mo1 alloy can strengthen the adsorption of the crucial intermediate and promote C-C coupling, leading to high selectivity and efficiency for C2+ products.

Competitive Trapping of Single Atoms onto a Metal Carbide Surface.

Controlling atomic adjustment of single-atom catalysts (SACs) can directly change its local configuration, regulate the energy barrier of intermediates, and further optimize reaction pathways. Herein, we report an atom manipulating process to synthesize Ni atoms stabilized on vanadium carbide (NiSA-VC) through a nanofiber-medium thermodynamically driven atomic migration strategy. Experimental and theoretical results systematically reveal the tunable migration pathway of Ni atom from Ni nanoparticles to neighboring N-doped carbon (NC) and finally to metal carbide that was obtained by regulating the competitive adsorption energies between VC and NC for capturing Ni atoms. For CO2-to-CO electroreduction, NiSA-VC exhibits an industrial current density of -180 mA cm-2 at -1.0 V vs reversible hydrogen electrode and the highest Faradaic efficiency for CO production (FECO) of 96.8% at -0.4 V vs RHE in a flow cell. Significant electron transfers occurring in NiSA-VC structures contribute to the activation of CO2, facilitate the reaction free energy, regulate *CO desorption as the rate-determining step, and promote the activity and selectivity. This study provides an understanding on how to design powerful SACs for electrocatalysis.

Ensemble effects of high entropy alloy for boosting alkaline water splitting coupled with urea oxidation.

FeCoNiMoRu/CNFs exhibits a small potential of 1.43 V vs. RHE (100 mA cm-2) and superior stability for 90 h toward urea electro-oxidation (UOR). In situ electrochemical Raman results strongly demonstrate the ensemble effects of the various metal sites on improving the UOR activity by co-stabilizing the important intermediates. This work will open new directions in the application of high-entropy alloys for small molecule oxidation reactions.

Bimetallic palladium-copper nanoplates with optimized d-band center simultaneously boost oxygen reduction activity and methanol tolerance.

The methanol-poisoning of electrocatalysts at the cathodic part of direct methanol fuel cells (DMFCs) can severely degrade the overall efficiency. Therefore, engineering cathodic catalysts with outstanding oxygen reduction activity, and simultaneously, superior methanol tolerance is greatly desired. Herein, bimetallic palladium-copper (PdCu) nanoplates with the optimized d-band center are designed as promising cathodic catalysts for DMFCs. It shows outstanding oxygen reduction activity with a mass activity (MA) of 0.522 A mgPd-1 in alkaline electrolyte, overwhelming the benchmarked commercial Pt/C and Pd/C. Meanwhile, it has prominent stability with only 4.0 % loss in MA after continuous 20 K cycles. More importantly, the PdCu nanoplates are almost inert toward methanol oxidation and show excellent anti-methanol capability. The theoretical calculations reveal that the downshift of d-band center in PdCu nanoplates and the electronic interaction between Pd and Cu atoms could effectively lower the methanol adsorption energy, thus leading to enhanced methanol tolerance. This work highlights the important role of tuning the electronic structure and optimized geometry of electrocatalysts to simultaneously boost their oxygen reduction activity, stability, and methanol tolerance for their future application in DMFCs.

Unraveling the electronegativity-dominated intermediate adsorption on high-entropy alloy electrocatalysts.

High-entropy alloys have received considerable attention in the field of catalysis due to their exceptional properties. However, few studies hitherto focus on the origin of their outstanding performance and the accurate identification of active centers. Herein, we report a conceptual and experimental approach to overcome the limitations of single-element catalysts by designing a FeCoNiXRu (X: Cu, Cr, and Mn) High-entropy alloys system with various active sites that have different adsorption capacities for multiple intermediates. The electronegativity differences between mixed elements in HEA induce significant charge redistribution and create highly active Co and Ru sites with optimized energy barriers for simultaneously stabilizing OH* and H* intermediates, which greatly enhances the efficiency of water dissociation in alkaline conditions. This work provides an in-depth understanding of the interactions between specific active sites and intermediates, which opens up a fascinating direction for breaking scaling relation issues for multistep reactions.

Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction.

Strain engineering in bimetallic alloy structures is of great interest in electrochemical CO2 reduction reactions (CO2RR), in which it simultaneously improves electrocatalytic activity and product selectivity by optimizing the binding properties of intermediates. However, a reliable synthetic strategy and systematic understanding of the strain effects in the CO2RR are still lacking. Herein, we report a strain relaxation strategy used to determine lattice strains in bimetal MNi alloys (M = Pd, Ag, and Au) and realize an outstanding CO2-to-CO Faradaic efficiency of 96.6% and show the outstanding activity and durability toward a Zn-CO2 battery. Molecular dynamics (MD) simulations predict that the relaxation of strained PdNi alloys (s-PdNi) is correlated with increases in synthesis temperature, and the high temperature activation energy drives complete atomic mixing of multiple metal atoms to allow for regulation of lattice strains. Density functional theory (DFT) calculations reveal that strain relaxation effectively improves CO2RR activity and selectivity by optimizing the formation energies of *COOH and *CO intermediates on s-PdNi alloy surfaces, as also verified by in situ spectroscopic investigations. This approach provides a promising approach for catalyst design, enabling independent optimization of formation energies of reaction intermediates to improve catalytic activity and selectivity simultaneously.

Flexible and recyclable bio-based transient resistive memory enabled by self-healing polyimine membrane.

The recyclable, self-healing and easily-degradable transient electronic technology has aroused tremendous attention in flexible electronic products. However, integrating the above advantages into one single flexible electronic device is still a huge challenge. Herein, we demonstrate a flexible and recyclable bio-based memory device using fish colloid as the resistive switching layer on a polyimine substrate, which affords reliable mechanical and electrical properties under repetitive conformal deformation operation. This flexible bio-based memory device presents potential analog behaviors including memory characteristics and excitatory current response, which undergoes incremental potentiation in conductance under successive electrical pulses. Moreover, this device is expected to greatly alleviate the environmental problems caused by electronic waste. It can be decomposed rapidly in water and well recycled, which is a promising candidate for transient memories and information security. We believe that this study can provide new possibilities to the field of high-performance transient electronics and flexible resistive memory devices.

Conductive metal and covalent organic frameworks for electrocatalysis: design principles, recent progress and perspective.

Metal and covalent organic frameworks (MOFs/COFs) are emerging promising candidates in the field of catalysts due to their porous nature, chemically well-defined active sites and structural diversity. However, they are typically provided with poor electrical conductivity, which is insufficient for them to work as satisfying electrocatalysts. Designing and fabricating MOFs/COFs with high conductivity presents a new avenue towards special electrochemical reactions. This minireview firstly highlighted the origin and design principles of conductive MOFs/COFs for electrocatalysis on the basis of typical charge transfer mechanisms, that is "through space", "extended conjugation" and "through bond". An overview of conductive MOFs/COFs used in the electrocatalytic carbon dioxide reduction reaction (CO2RR), water splitting and the oxygen reduction reaction (ORR) was then made to track the very recent progress. In the final remarks, the present challenges and perspectives for the use of conductive MOFs/COFs as electrocatalysts including their structural optimization, feasible applications and structure-activity correlation are proposed.

Sublayer Stable Fe Dopant in Porous Pd Metallene Boosts Oxygen Reduction Reaction.

Engineering the morphology and electronic properties simultaneously of emerging metallene materials is an effective strategy for enhancing their performance as oxygen reduction reaction (ORR) electrocatalysts. Herein, a highly efficient and stable ORR electrocatalyst, Fe-doped ultrathin porous Pd metallene (Fe-Pd UPM) composed of a few layers of 2D atomic metallene layers, was synthesized using a simple one pot wet-chemical method and characterized. Fe-Pd UPM was measured to have enhanced ORR activity compared to undoped Pd metallene. Fe-Pd UPM exhibits a mass activity of 0.736 A mgPd-1 with a loss of mass activity of only 5.1% after 10 000 cycles at 0.9 V versus the reversible hydrogen electrode (vs RHE) in 0.1 M KOH solution. Density functional theory (DFT) calculations reveal that the stable Fe dopant in the inner atomic layers of Fe-Pd UPM delivers a much smaller overpotential during O* hydrogenation into OH*. The morphology, porous structure, and Fe doping were verified to have enhanced ORR activity. We believe that the rational design of metallene materials with porous structures and interlayer doping is promising for the development of efficient and stable electrocatalysts.

Design of Intrinsically Flame-Retardant Vanillin-Based Epoxy Resin for Thermal-Conductive Epoxy/Graphene Aerogel Composites.

Vanillin, as a lignin-derived mono-aromatic compound, has attracted increasing attention due to its special role as an intermediate for the synthesis of different biobased polymers. Herein, intrinsically flame-retardant and thermal-conductive vanillin-based epoxy/graphene aerogel (GA) composites were designed. First, a bifunctional phenol intermediate (DN-bp) was synthesized by coupling vanillin with 4, 4'-diaminodiphenylmethane and DOPO, and the epoxy monomer (MEP) was obtained by the epoxidation reaction with DN-bp and epichlorohydrin. Then, various amounts of MEP and diglycidyl ether of bisphenol A (DER) were mixed and cured. Interestingly, the flexural strength and modulus were greatly enhanced from 72.8 MPa and 1.3 GPa to 90.3 MPa and 2.8 GPa, respectively, at 30 wt % MEP, due to the rigidity of MEP and strong intermolecular N-H hydrogen bonding interactions. Meanwhile, the cured epoxy achieved a UL-94 V0 rating with a low P content of 1.06%. The flame-retardant vanillin-based epoxy was then impregnated into the thermal conductive 3D GA networks. The obtained epoxy/graphene composite showed excellent flame retardancy and thermal conductivity [λ = 0.592 W/(m·K)] with only 0.5 wt % graphene in the system. Based on these results, we believe that this work would represent a novel solution for the preparation of high-performance biobased flame-retardant multipurpose epoxies.

Thermodynamically driven metal diffusion strategy for controlled synthesis of high-entropy alloy electrocatalysts.

We report a thermodynamically driven metal diffusion strategy for the controlled synthesis of high-entropy alloy (HEA) nanocrystals using electrospun carbon nanofibers (CNFs) as nanoreactors. This conceptual pathway is resistant to high temperatures and produces a series of medium-entropy alloy (MEA) and HEA nanocrystals supported on CNFs by adjusting the numbers and kinds of elements. The FeCoNiCrMn/CNFs obtained the lowest overpotential of 345 mV at 50 mA cm-2 compared to MEA. The operando electrochemical Raman results indicate that the enhanced electron transfer from low-electronegativity Fe, Ni, Cr and Mn to the orbit of the Co atom makes Co a local negative charge center, leading to the decrease in absorption energy of OH.