ABSTRACT
Fucoidan is a sulfated polysaccharide that occurs naturally in the cell wall of brown seaweeds and has substantial biological efficacy. Optimizing the extraction of fucoidan from different brown seaweeds was the primary goal of this research. The optimization of fucoidan extraction was applied on the brown macroalga Turbinaria turbinata using a Box-Behnken Design (BBD) to inspect the impacts of different pH (3, 5, 7), temperature (70, 80, 90⯰C) and extraction duration (60, 120, 180â¯min) on both the yield and sulfate content of fucoidan. The optimized parameters recorded to maximize the fucoidan yield and its sulfate content were a pH of 3.44 and a temperature of 82.26⯰C for 60â¯min. The optimal conditions obtained from BBD were used for fucoidan extraction from T. turbinata, Sargassum cinereum, Padina pavonica, and Dictyota dichotoma. The highest average of fucoidan yield was derived from P. pavonica (40.76⯱â¯4.04â¯% DW). FTIR, 1H NMR, and HPLC were used to characterize extracted fucoidan. The extracted fucoidan's Physical characteristics, biochemical composition, antioxidant potential, antitumor effect against breast cancer cells (MCF-7), and antimicrobial and anticoagulant activity were assessed. The extracted fucoidan from D. dichotoma, followed by that extracted from S. cinereum, which had the highest sulphate content, depicted the highest antioxidant, anticancer, and anticoagulant activities. Fucoidan has demonstrated a strong antimicrobial action against some pathogenic microorganisms; Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, and Candida albicans. The anticoagulant properties of fucoidan from D. dichotoma were stronger than those of fucoidan from S. cinereum, T. turbinata, and P. pavonica due to its higher sulphate content. These findings could be used for various biomedical applications to improve the pharmaceutical industry.
ABSTRACT
Alginate is a natural polysaccharide obtained from brown seaweeds and having advantageous health usefulness, was employed extensively in nutraceutical sectors and the pharmaceutical industry. This research was devoted for optimization of alginate extraction from different brown seaweeds. A Box-Behnken Design (BBD) was used for the optimization of alginate extraction from Padina pavonica by analyzing the influence of temperature (30, 40, and 50⯰C), time (60, 120, and 180â¯min), and alkaline concentration (1â¯%, 2â¯%, and 3â¯%) on extraction yield and uronic acid content. The optimal conditions recorded to maximize the alginate yield and its uronic content were an alkali concentration of 2.5â¯% and a temperature of 39.95⯰C for 102.5â¯min. The optimized parameters achieved from BBD were used to compare alginate extraction from P. pavonica, Sargassum cinereum, Turbinaria turbinata, and Dictyota dichotoma. FTIR, 1H NMR, and HPLC were used to characterize the extracted alginate. The bioactivity of alginate against free radicals, breast cancer cells (MCF-7), some pathogenic microbes, and SARS-CoV-2 viruses was tested. Under the optimized conditions, alginate was extracted from P. pavonica at a rate of 21.13⯱â¯2.47â¯% DW, S. cinereum at 24.08⯱â¯0.33â¯% DW g/L, T. turbinata at 17.47⯱â¯0.26â¯% DW, and D. dichotoma at a rate of 19.57⯱â¯3.60â¯% DW. The alginate extracted from D. dichotoma showed the highest antioxidant, anticancer, and antiviral activity.
ABSTRACT
The biosynthesis of silver nanoparticles, both economically and environmentally advantageous, uses algae extracts. In the current work, we extracted the marine brown alga Hormophysa triquetra (C. Agardh) kützing and used it to make silver nanoparticles (HAgNPs) which are characterized via UV-visible spectrophotometers, Transmission Electron Microscopy (TEM), Zeta potential, and FTIR then used them in the bio adsorption of crude petroleum oil from seawater, comparing them with H. triquetra aqueous extract. UV scan of the phycosynthesized silver nanoparticles achieved the highest absorption at 369 nm. TEM showed that the synthesized HAgNPs occur with smooth, spherical, and semispherical forms with sizes ranging from 12.04 to 20.67 nm, zeta potential illustrated that HAgNPs were charged with -22.1, The H. triquetra aqueous extract's FTIR examination identified several active groups like - OH, -C=C-, NO, -CH, CCl, -C ≡ C-H: CH which are responsible for the bioadsorption of crude petroleum oil. When extracting crude petroleum oil from seawater, HAgNPs worked better than its aqueous extract. The maximum removal % for light n-alkanes (Ln-alk), heavy n-alkanes (Hn-alk), and PAHs were 70.4 %, 71.63 %, and 75.38 % respectively for H. triquetra aqueous extract with adsorption capacity 889, 511, 273 µg/g at salinity 36 % and pH 5, while in case of HAgNPs the results were 75.81 %, 77.15 %, and 80.56 %, respectively with adsorption capacity 957, 550, 292 µg/g at the same salinity and pH.
ABSTRACT
Environmental pollution poses a critical global challenge, and traditional wastewater treatment methods often prove inadequate in addressing the complexity and scale of this issue. On the other hand, microalgae exhibit diverse metabolic capabilities that enable them to remediate a wide range of pollutants, including heavy metals, organic contaminants, and excess nutrients. By leveraging the unique metabolic pathways of microalgae, innovative strategies can be developed to effectively remediate polluted environments. Therefore, this review paper highlights the potential of microalgae-mediated bioremediation as a sustainable and cost-effective alternative to conventional methods. It also highlights the advantages of utilizing microalgae and algae-bacteria co-cultures for large-scale bioremediation applications, demonstrating impressive biomass production rates and enhanced pollutant removal efficiency. The promising potential of microalgae-mediated bioremediation is emphasized, presenting a viable and innovative alternative to traditional treatment methods in addressing the global challenge of environmental pollution. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the potential of microalgae-based technology wastewater treatment.
Subject(s)
Biodegradation, Environmental , Microalgae , Wastewater , Microalgae/metabolism , Wastewater/microbiology , Wastewater/chemistry , Metals, Heavy/metabolism , Biomass , Bacteria/metabolism , Bacteria/genetics , Water Pollutants, Chemical/metabolism , Water Purification/methodsABSTRACT
Recently, there has been a surge in curiosity regarding the application of biopolymer-derived nanomaterials, primarily attributable to their extensive array of potential applications. In this study, nanocellulose was extracted from algae, biomolecule substances synthesized selenium nanoparticles, and a simple nanocomposite of nanocellulose and nanoselenium was elaborated using nanocellulose as a reducing agent under hydrothermal conditions. These nanocomposite materials have markedly improved properties at low concentrations. Our obtained polymers were characterized using techniques including Fourier-transform infrared spectroscopy, X-ray powder diffraction, Thermo gravimetric analysis (TGA), Scanning electron microscopic (SEM), Energy Dispersive X-ray analysis (EDX), Transmission electron microscopic (TEM), Zeta Potential and Dynamic Light Scattering (DLS). The size of nanocellulose, nanoselenium, and nanocomposite ranged from 35 to 85â¯nm. Antimicrobial investigation of the prepared nanopolymers was tested against Gram-negative bacteria such as Bacillus subtilis ATCC 6633 and Staphylococcus aureus ATCC 6538, Gram-positive bacteria such as Escherichia coli ATCC8739 and Pseudomonas aeruginosa ATCC 90274 and fungi such as Candida albicans ATCC 10221 besides Aspergillus fumigatus. In antibacterial action tests, nanoselenium showed significant efficacy against Bacillus subtilis with a 12â¯mm zone of inhibition, while the nanocomposite eclipsed all microorganisms. Nanocellulose and the nanocomposite were potent against Staphylococcus aureus (14â¯mm and 16â¯mm zones of inhibition, respectively). The nanocomposite showed potential against Escherichia coli and Pseudomonas aeruginosa (17â¯mm and 15â¯mm zones of inhibition, respectively). All polymers effectively inhibited Candida albicans growth (18â¯mm for the nanocomposite). The minimum inhibitory concentrations (MIC) for three polymers have also been established. While nanocellulose displayed a MIC of 62.5⯵g/ml in contradiction to Staphylococcus aureus, nanoselenium demonstrated a significant MIC of 3.95⯵g/ml against Bacillus subtilis. These findings highlight the potential of the nanocomposite (nanocellulose-nanoselenium) as a broad-spectrum antimicrobial polymer.
Subject(s)
Anti-Infective Agents , Cellulose , Microbial Sensitivity Tests , Nanocomposites , Nanocomposites/chemistry , Cellulose/chemistry , Cellulose/pharmacology , Anti-Infective Agents/pharmacology , Anti-Infective Agents/chemistry , Selenium/chemistry , Selenium/pharmacology , Drug Synergism , X-Ray Diffraction , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Bacteria/drug effects , Spectroscopy, Fourier Transform InfraredABSTRACT
Phosphorus fertilization imposes critical limitations on crop productivity and soil health. The aim of the present work is to explore the potential of two phosphate solubilizing bacteria (PSB) species in phosphorus supplementation of canola (Brassica napus L.). Out of 38 bacterial isolates obtained from nine medicinal plants, two bacterial strains (20P and 28P) were proved as the most potent for the in-vitro tricalcium phosphate solubilization test. These isolates verified their activity toward different enzymes as nitrogenase and alkaline phosphatase. Also, 20P and 28P gave a high amount of indole-3-acetic acid, 34.16 µg/ml and 35.20 µg/ml, respectively, and were positive for siderophores production as they detected moderate affinity for iron chelation. Molecular identification confirmed that strain 20P was Bacillus vallismortis and strain 28P was Bacillus tequilensis. A pot experiment was conducted to study the effect of four different phosphorus concentrations (0%, 50%, 75%, and 100% P) each alone and/or in combination with B. vallismortis, B. tequilensis, or both bacterial isolates on the vegetative growth and some physiological parameters of canola. The combined treatment of 50% phosphorus + (B. vallismortis + B. tequilensis) was generally the most effective with respect to shoot height, shoot dry mass, leaf area, photosynthetic pigment fractions, total sugar content, and accumulated NPK content. In contrast, the rhizosphere pH reached the minimum value under the same treatment. These findings highlighted the potential use of PSB (B. vallismortis and B. tequilensis) along with phosphorus fertilization as a safe sustainable tactic.
ABSTRACT
Microalgae represent a promising renewable feedstock for the sustainable production of biohydrogen. Their high growth rates and ability to fix carbon utilizing just sunlight, water, and nutrients make them well-suited for this application. Recent advancements have focused on improving microalgal hydrogen yields and cultivation methods. This review aims to summarize recent developments in microalgal cultivation techniques and genetic engineering strategies for enhanced biohydrogen production. Specific areas of focus include novel microalgal species selection, immobilization methods, integrated hybrid systems, and metabolic engineering. Studies related to microalgal strain selection, cultivation methods, metabolic engineering, and genetic manipulations were compiled and analyzed. Promising microalgal species with high hydrogen production capabilities such as Synechocystis sp., Anabaena variabilis, and Chlamydomonas reinhardtii have been identified. Immobilization techniques like encapsulation in alginate and integration with dark fermentation have led to improved hydrogen yields. Metabolic engineering through modulation of hydrogenase activity and photosynthetic pathways shows potential for enhanced biohydrogen productivity. Considerable progress has been made in developing microalgal systems for biohydrogen. However, challenges around process optimization and scale-up remain. Future work involving metabolic modeling, photobioreactor design, and genetic engineering of electron transfer pathways could help realize the full potential of this renewable technology.
Subject(s)
Microalgae , Microalgae/metabolism , Biofuels , Fermentation , Photobioreactors , Hydrogen/analysis , BiomassABSTRACT
Background: Phaeophyceae species are enticing interest among researchers working in the nanotechnology discipline, because of their diverse biological activities such as anti-inflammatory, antioxidant, anti-microbial, and anti-tumor. In the present study, the anti-cancer properties of Polycladia crinita extract and green synthesized Polycladia crinita selenium nanoparticles (PCSeNPs) against breast cancer cell line (MDA-MB-231) and solid Ehrlich carcinoma (SEC) were investigated. Methods: Gas chromatography-mass spectroscopy examinations of Polycladia crinita were determined and various analytical procedures, such as SEM, TEM, EDX, and XRD, were employed to characterize the biosynthesized PCSeNPs. In vitro, the anticancer activity of free Polycladia crinita and PCSeNPs was evaluated using the viability assay against MDA-MB-231, and also cell cycle analysis by flow cytometry was determined. Furthermore, to study the possible mechanisms behind the in vivo anti-tumor action, mice bearing SEC were randomly allocated into six equal groups (n = 6). Group 1: Tumor control group, group 2: free SeNPs, group 3: 25 mg/kg Polycladia crinita, group 4: 50 mg/kg Polycladia crinita, group 5: 25 mg/kg PCSeNPs, group 6: 50 mg/kg PCSeNPs. Results: Gas chromatography-mass spectroscopy examinations of Polycladia crinita extract exposed the presence of many bioactive compounds, such as 4-Octadecenoic acid-methyl ester, Tetradecanoic acid, and n-Hexadecenoic acid. These compounds together with other compounds found, might work in concert to encourage the development of anti-tumor activities. Polycladia crinita extract and PCSeNPs were shown to inhibit cancer cell viability and early cell cycle arrest. Concentrations of 50 mg/kg of PCSeNPs showed suppression of COX-2, NF-кB, VEGF, ki-67, Notch 1, and Bcl-2 protein levels. Otherwise, showed amplification of the caspase 3, BAX, and P53 protein levels. Moreover, gene expression of caspase 3, caspase 9, Notch 1, cyclin D1, NF-кB, IL-6, and VEGF was significantly more effective with PCSeNPs than similar doses of free extract. Conclusion: The PCSeNPs mediated their promising anti-cancerous action by enhancing apoptosis and mitigating inflammation, which manifested in promoting the total survival rate and the tumor volume decrease.
ABSTRACT
Wound healing is a physiological process that results in the reconstruction and restoration of granulation tissue, followed by scar formation. We explored the impact of fatty acids in the form of oils on wound healing since they are part of membrane phospholipids and participate in the inflammatory response. This work investigated the efficiency of fatty acids extracted from microalga Parachlorella kessleri in treating excisional wounds and burns and evaluated their antioxidant activity. The rationale behind this investigation lies in the integral role fatty acids play in membrane phospholipids and their involvement in the inflammatory response. Among different nitrogen sources, glycine showed the highest biomass and lipid productivity (0.08 g L-1 d-1 and 58.37 µgml-1 day-1, respectively). Based on the percentage of polyunsaturated fatty acids that increased by 50.38 % in the Glycine culture of P. kessleri, both total antioxidant capacity and DPPH radical scavenging activity were higher in the Glycine culture than control culture. In 30 anaesthetized male mice divided into 6 groups, using either a burn or an excision, two identical paravertebral full-thickness skin lesions were created. Either oils of P. kessleri (extracted from control and glycine culture) ointments or the vehicle (placebo cream) were applied twice daily to the excisional wounds of mice, while mebo cream was used for burn wounds as well as P. kessleri oil. P. kessleri oils (control or glycine culture) showed a significant effect on the reduction of excisional wounds and burns. Histopathological analysis showed that angiogenesis, collagen fiber formation, and epidermis creation were some of the healing indicators that improved. The key elements for this healing property are omega -3 fatty acids, and both P. kessleri oils extracted from control and glycine culture have significant wound-healing effects. Oil of glycine culture of P. kessleri, however, displayed superior results in this regard.
Subject(s)
Antioxidants , Burns , Microalgae , Wound Healing , Wound Healing/drug effects , Animals , Mice , Burns/drug therapy , Burns/pathology , Antioxidants/pharmacology , Antioxidants/therapeutic use , Male , Fatty Acids/pharmacology , Glycine/pharmacology , Glycine/therapeutic use , Chlorophyta , Skin/injuries , Skin/drug effectsABSTRACT
Microalgal lipids are precursors to the production of biodiesel, as well as a source of valuable dietary components in the biotechnological industries. So, this study aimed to assess the effects of nutritional (nitrogen, and phosphorus) starvations and salinity stress (NaCl) on the biomass, lipid content, fatty acids profile, and predicted biodiesel properties of green microalga Monoraphidium braunii. The results showed that biomass, biomass productivity, and photosynthetic pigment contents (Chl. a, b, and carotenoids) of M. braunii were markedly decreased by nitrogen and phosphorus depletion and recorded the maximum values in cultures treated with full of N and P concentrations (control, 100%). These parameters were considerably increased at the low salinity level (up to 150 mM NaCl), while an increasing salinity level (up to 250 mM NaCl) reduces the biomass, its productivity, and pigment contents. Nutritional limitations and salt stress (NaCl) resulted in significantly enhanced accumulation of lipid and productivity of M. braunii, which represented more than twofold of the control. Furthermore, these conditions have enhanced the profile of fatty acid and biodiesel quality-related parameters. The current study exposed strategies to improve M. braunii lipid productivity for biodiesel production on a small scale in vitro in terms of fuel quality under low nutrients and salinity stress.
Subject(s)
Chlorophyceae , Microalgae , Biofuels , Biomass , Sodium Chloride/pharmacology , Fatty Acids/chemistry , Nutrients , Salinity , Nitrogen/pharmacology , Phosphorus/pharmacology , Salt StressABSTRACT
Protein-rich seaweeds are regarded as having commercial significance due to their numerous industrial applications. The green seaweed Halimeda opuntia was used during this study for the preparation of bioplastic film. A thin bioplastic film with better physical and mechanical properties was produced by optimizing the ratio of polyvinyl alcohol (PVA) to seaweed biomass. The films obtained were characterized by their thickness, tensile strength, elongation at break, Young's modulus, moisture absorption resistance, and solubility. To evaluate the composition and potential for chemical reactions of the films, an FTIR spectroscopy examination was conducted. Whereas TG-DTA and AFM were performed on films with high mechanical properties. The bioplastic film produced when algae percent was tripled in PVA concentration had better physical and mechanical characteristics, and the bioplastic films degraded in the environment within a short time. According to the current study, seaweed might serve as an alternative source for the production of bioplastic, which could help minimize the use of non-biodegradable plastics.
Subject(s)
Opuntia , Seaweed , Chemical Phenomena , Tensile Strength , BiopolymersABSTRACT
Over the past years, the assessment of myco-fabricated selenium nanoparticles (SeNPs) properties, is still in its infancy. Herein, we have highly stable myco-synthesized SeNPs using molecularly identified soil-isolated fungus; Penicillium tardochrysogenum OR059437; (PeSeNPs) were clarified via TEM, EDX, UV-Vis spectrophotometer, FTIR and zeta potential. The therapeutic efficacy profile will be determined, these crystalline PeSeNPs were examined for antioxidant, antimicrobial, MIC, and anticancer potentials, indicating that, PeSeNPs have antioxidant activity of (IC50, 109.11 µg/mL) using DPPH free radical scavenging assay. Also, PeSeNPs possess antimicrobial potential against Penicillium italicum RCMB 001,018 (1) IMI 193,019, Methicillin-Resistant Staphylococcus aureus (MRSA) ATCC 4330 and Porphyromonas gingivalis RCMB 022,001 (1) EMCC 1699; with I.Z. diameters and MIC; 16 ± 0.5 mm and MIC 500 µg/ml, 11.9 ± 0.6 mm, 500 µg/ml and 15.9±0.6 mm, 1000 µg/ml, respectively. Additionally, TEM micrographs were taken for P. italicum treated with PeSeNPs, demonstrating the destruction of hyphal membrane and internal organelles integrity, pores formation, and cell death. PeSeNP alone in vivo and combined with a near-infrared physiotherapy lamp with an energy intensity of 140 mW/cm2 showed a strong therapeutic effect against cancer cells. Thus, PeSeNPs represent anticancer agents and a suitable photothermal option for treating different kinds of cancer cells with lower toxicity and higher efficiency than normal cells. The combination therapy showed a very large and significant reduction in tumor volume, the tumor cells showed large necrosis, shrank, and disappeared. There was also improvement in liver ultrastructure, liver enzymes, and histology, as well as renal function, urea, and creatinine.
Subject(s)
Anti-Infective Agents , Methicillin-Resistant Staphylococcus aureus , Nanoparticles , Penicillium , Selenium , Selenium/pharmacology , Selenium/chemistry , Methicillin-Resistant Staphylococcus aureus/metabolism , Nanoparticles/chemistry , Antioxidants/pharmacology , Antioxidants/chemistry , Anti-Infective Agents/pharmacologyABSTRACT
The antibiofilm, antibacterial, antioxidant, and anticancer activities of the methanolic extract of Padina pavonica L. were determined. Results deduced that the algal extract had a high biofilm formation inhibitory action done via crystal violet (CV) assay, to 88-99%. The results showed a strong antibacterial against the identified bacteria species. Staphylococcus aureus, Enterococcus faecalis, Pseudomonas aeruginosa, Klebsiella pneumonia, Bacillus subtilis, and the extract had moderate antibacterial activity against Escherichia coli, Pseudomonas fluorescens and Streptococcus agalactiae. The algal extract has a concentration-dependent DPPH radical scavenging activity (84.59%, with IC50 = 170.31 µg/ml). The inhibitory percent of P. pavonica methanolic extract in vitro antiproliferative activity was 1.79-98.25% with IC50 = 15.14 µg/ml against lung carcinoma. Phenols, terpenes, amino acids, alkaloids, flavones, alcohols, and fatty acids were among the metabolites whose biological actions were evaluated. In conclusion, for the first time, P. pavonica methanolic extract exhibited effective antibiofilm, antibacterial, antioxidant, and anticancer activities. .
Subject(s)
Antioxidants , Plant Extracts , Antioxidants/pharmacology , Antioxidants/chemistry , Plant Extracts/pharmacology , Plant Extracts/chemistry , Biomass , Anti-Bacterial Agents/pharmacology , Methanol , BiofilmsABSTRACT
The necessity to engineer sustainable nanomaterials for the environment and human health has recently increased. Due to their abundance, fast growth, easy cultivation, biocompatibility and richness of secondary metabolites, algae are valuable biological source for the green synthesis of nanoparticles (NPs). The aim of this review is to demonstrate the feasibility of using algal-based NPs for cancer treatment. Blue-green, brown, red and green micro- and macro-algae are the most commonly participating algae in the green synthesis of NPs. In this process, many algal bioactive compounds, such as proteins, carbohydrates, lipids, alkaloids, flavonoids and phenols, can catalyze the reduction of metal ions to NPs. In addition, many driving factors, including pH, temperature, duration, static conditions and substrate concentration, are involved to facilitate the green synthesis of algal-based NPs. Here, the biosynthesis, mechanisms and applications of algal-synthesized NPs in cancer therapy have been critically discussed. We also reviewed the effective role of algal synthesized NPs as anticancer treatment against human breast, colon and lung cancers and carcinoma.
Subject(s)
Metal Nanoparticles , Nanoparticles , Neoplasms , Humans , Nanoparticles/chemistry , Plants/chemistry , Metal Nanoparticles/therapeutic use , Metal Nanoparticles/chemistry , Neoplasms/drug therapyABSTRACT
Brown macroalgae are a rich source of fucoidans with many pharmacological uses. This research aimed to isolate and characterize fucoidan from Dictyota dichotoma var. dichotoma (Hudson) J.V. Lamouroux and evaluate in vitro its antioxidant and antitumor potential. The fucoidan yield was 0.057 g/g algal dry wt with a molecular weight of about 48.6 kDa. In terms of fucoidan composition, the sulfate, uronic acid, and protein contents were 83.3 ± 5.20 mg/g fucoidan, 22.5 ± 0.80 mg/g fucoidan, and 26.1 ± 1.70 mg/g fucoidan, respectively. Fucose was the primary sugar component, as were glucose, galactose, mannose, xylose, and glucuronic acid. Fucoidan exhibited strong antioxidant potential that increased by more than 3 times with the increase in concentration from 0.1 to 5.0 mg/mL. Moreover, different concentrations of fucoidan (0.05-1 mg/mL) showed their ability to decrease the viability of Ehrlich ascites carcinoma cells in a time-dependent manner. These findings provided a fast method to obtain an appreciable amount of natural fucoidan with established structural characteristics as a promising compound with pronounced antioxidant and anticancer activity.
Subject(s)
Phaeophyceae , Seaweed , Antioxidants/pharmacology , Polysaccharides/chemistry , Phaeophyceae/chemistry , Seaweed/chemistryABSTRACT
The anticipated increase in the influx of plastic waste into aquatic environments has propelled the identification and elimination of plastic waste into the global agenda. The plastics sector generates a significant volume of materials, which, due to their extended durability, accumulate rapidly in natural ecosystems. Consequently, this indiscriminate utilization, along with the deposition of plastic waste (PW) in landfills and inadequate recycling practices, leads to diverse economic, social, and environmental consequences. Microplastics (MPs) are a type of PW that has been fragmented into particles measuring less than 5 mm. These particles have been found in several environments, including the air, soil, freshwater, and ocean ecosystems, where they accumulate in large quantities. In order to gain insight into the ecological risks and resource implications associated with a plastic product, it is strongly advised to conduct life cycle and sustainability analyses. Therefore, this paper examines various strategies aimed at achieving effective management of MP waste in order to develop a conceptual framework for MPs in circular economy and life cycle assessment (LCA). The findings of this study provides a new avenue for future research and contribution to manage MP waste as well as reduce their environmentally hazardous impact.
Subject(s)
Microplastics , Waste Management , Animals , Plastics , Ecosystem , Environmental Monitoring , Life Cycle StagesABSTRACT
Nowadays, researchers are very interested in improving the stability and solubility of blending diesel fuel with a high percentage of ethanol. As a result, the goal of this paper was to find a way to use the surfactant of Tri-n-butyl phosphate (TBP) substance to blend ethanol with diesel fuel to a level of 40%. Diesel fuel is mixed with ethanol in volumetric proportions of 10%, 20%, 30%, and 40%, as well as a tiny amount of TBP from 1 to 4%. The prepared blends were the subject of an experiment evaluation by fueling a direct injection diesel engine. This engine is a water-cooled, commercial diesel engine, single cylinder, and four-stroke with 12 kW maximum power. The four blends were evaluated as clean fuel mixtures of 10% ethanol/90% diesel/1% TBP, 20% ethanol/80% diesel/2% TBP, 30% ethanol/70% diesel/3% TBP, and 40% ethanol/60% diesel/4% TBP. As the starting fuel, we used 100% diesel to compare the results. The engine's output and emissions have been measured at various engine loads and constant speeds of 1500 rpm. According to the data gathered, even when the percentage of ethanol was increased to 40%, neither the base fuel nor the engine BTE changed significantly. The engine exhaust gas temperature was found to decrease slightly when the proportion of ethanol was increased. When bioethanol is increased to 40% of the base volume, it causes an increase in the combustion of unburned hydrocarbons and CO emissions. However, when the percentage of ethanol was increased from 100% diesel to the base fuel to 40%, CO2 emissions decreased, and O2 emissions slightly increased.
ABSTRACT
Currently, there is growing interest in exploring natural bioactive compounds with anti-inflammatory potential to overcome the side effects associated with the well-known synthetic chemicals. Algae are a rich source of bioactive molecules with numerous applications in medicine. Herein, the anti-inflammatory effect of Ulva intestinalis alone or selenium nanoparticles loaded with U. intestinalis (UISeNPs), after being fully characterized analytically, was investigated by a carrageenan-induced inflammation model. The pretreated groups with free U. intestinalis extract (III and IV) and the rats pretreated with UISeNPs (groups V and VI) showed significant increases in the gene expression of Keap1, with fold increases of 1.9, 2.27, 2.4, and 3.32, respectively. Similarly, a remarkable increase in the Nrf2 gene expression, with 2.09-, 2.36-, 2.59-, and 3.7-fold increases, was shown in the same groups, respectively. Additionally, the groups III, IV, V, and VI revealed a significantly increased HO-1 gene expression with a fold increase of 1.48, 1.61, 1.87, and 2.84, respectively. Thus, both U. intestinalis extract and the UISeNPs boost the expression of the cytoprotective/antioxidant pathway Keap1/Nrf2/HO-1, with the UISeNPs having the upper hand over the free extract. In conclusion, U. intestinalis and UISeNPs have proven promising anti-inflammatory activity through mediating different underlying mechanisms.
Subject(s)
Nanoparticles , Selenium , Ulva , Animals , Rats , Selenium/pharmacology , Antioxidants/pharmacology , Carrageenan/toxicity , NF-E2-Related Factor 2 , Kelch-Like ECH-Associated Protein 1 , EdemaABSTRACT
BACKGROUND: Marine macroalgae have gained interest recently, mostly due to their bioactive components. Polycladia crinita is an example of marine macroalgae from the Phaeophyceae class, also known as brown algae. They are characterized by a variety of bioactive compounds with valuable medical applications. The prevalence of such naturally active marine resources has made macroalgae-mediated manufacturing of nanoparticles an appealing strategy. In the present study, we aimed to evaluate the antioxidant and anti-inflammatory features of an aqueous extract of Polycladia crinita and biosynthesized P. crinita selenium nanoparticles (PCSeNPs) via a carrageenan-induced rat paw edema model. The synthesized PCSeNPs were fully characterized by UV-visible spectroscopy, FTIR, XRD, and EDX analyses. RESULTS: FTIR analysis of Polycladia crinita extract showed several sharp absorption peaks at 3435.2, 1423.5, and 876.4 cm-1 which represent O-H, C=O and C=C groups. Moreover, the most frequent functional groups identified in P. crinita aqueous extract that are responsible for producing SeNPs are the -NH2-, -C=O-, and -SH- groups. The EDX spectrum analysis revealed that the high percentages of Se and O, 1.09 ± 0.13 and 36.62 ± 0.60%, respectively, confirmed the formation of SeNPs. The percentages of inhibition of the edema in pretreated groups with doses of 25 and 50 mg/kg, i.p., of PCSeNPs were 62.78% and 77.24%, respectively. Furthermore, the pretreated groups with 25, 50 mg/kg of P. crinita extract displayed a substantial decrease in the MDA levels (P < 0.00, 26.9%, and 51.68% decrease, respectively), indicating potent antioxidant effect. Additionally, the pretreated groups with PCSeNPs significantly suppressed the MDA levels (P < 0.00, 54.77%, and 65.08% decreases, respectively). The results of immune-histochemical staining revealed moderate COX-2 and Il-1ß expressions with scores 2 and 1 in rats pre-treated with 25 and 50 mg/kg of free extract, respectively. Additionally, the rats pre-treated with different doses of PCSeNPs demonstrated weak COX-2 and Il-1ß expressions with score 1 (25 mg/kg) and negative expression with score 0 (50 mg/kg). Both antioxidant and anti-inflammatory effects were dose-dependent. CONCLUSIONS: These distinguishing features imply that this unique alga is a promising anti-inflammatory agent. Further studies are required to investigate its main active ingredients and possible side effects.
Subject(s)
Nanoparticles , Seaweed , Selenium , Animals , Rats , Antioxidants , Cyclooxygenase 2 , Anti-Inflammatory Agents , AntibodiesABSTRACT
The removal of n-alkanes, polycyclic aromatic hydrocarbons, and heavy metals from wastewater using three dried seaweeds Ulva intestinalis Linnaeus (green alga), Sargassum latifolium (Turner) C.Agardh (brown alga), and Corallina officinalis Kützing (red alga) has been shown to evaluate their potential usage as inexpensive adsorbents. Under natural environmental conditions, numerous analytical methods, including zeta potential, energy dispersive X-ray spectroscopy (EDX), SEM, and FT-IR, are used in this study. The results showed that n-alkanes and polycyclic aromatic hydrocarbons adsorption increased with increasing contact time for all three selected algae, with a large removal observed after 15 days, while the optimal contact time for heavy metal removal was 3 h. S. latifolium dry biomass had more potential as bioadsorbent, followed by C. officinalis and then U. intestinalis. S. latifolium attained removal percentages of 65.14%, 72.50%, and 78.92% for light n-alkanes, heavy n-alkanes, and polycyclic aromatic hydrocarbons (PAHs), respectively, after 15 days. Furthermore, it achieved removal percentages of 94.14, 92.62, 89.54, 87.54, 82.76, 80.95, 77.78, 73.02, and 71.62% for Mg, Zn, Cu, Fe, Cr, Pb, Cd, Mn, and Ni, respectively, after 3 h. Carboxyl and hydroxyl from FTIR analysis took part in wastewater treatment. The zeta potentials revealed that algal cells have a negatively charged surface, and the cell surface of S. latifolium has a more negative surface charge than U. intestinalis and C. officinalis. Our study suggests that seaweeds could play an important role in wastewater treatment and thus help as an economical, effective, and ecofriendly bioremediation system for ecological health and life protection.