Simultaneous interrogation of multiple cores in a shape sensor fiber with a graded index fiber micro-turnaround.

A critical limitation for optical fiber sensor technology is the complexity of the interrogators used in such measurements, which has driven continued interest in enhanced optical fibers and fiber assemblies that will simplify interrogator design. In this work, we report on a novel multicore fiber shape sensor utilizing a distal graded index (GRIN) fiber micro-turnaround. We show that four offset cores of this fiber can be interrogated simultaneously with a single high performance optical frequency domain reflectometry measurement. The GRIN turnaround is 498 µm in length and reflects signal from one offset core to an opposite core with a 2 dB roundtrip attenuation. We show that the bend sensing accuracy of our single measurement system is similar to the accuracy of sequential measurements of four individual cores. We also demonstrate fiber shape reconstruction with a single measurement over 0.55 m with 80 µm spatial resolution when the fiber is wrapped around two posts.

Measuring the shape of microbends in optical fibers.

We report on the distributed shape measurement of small deformations produced along the length of an optical fiber. The fiber contains multiple waveguiding cores, each inscribed with weak continuous Bragg gratings. The distributed Bragg-reflectivity data for the fiber cores, obtained from the optical backscatter reflectometry, are used to estimate the local curvature and the position of the fiber. We successfully demonstrate the sensing of periodic microdeformations-approximately 1 µm or less in amplitude and a few hundred µm in length. Such microbends are known to cause attenuation in optical fibers, and the approach presented here can enable a detailed measurement of these microbends in applications ranging from telecommunications cable design to biotechnology, robotics, manufacturing, aerospace, and security.

Enhanced Optical Fiber for Distributed Acoustic Sensing beyond the Limits of Rayleigh Backscattering.

We report on engineered fibers with enhanced optical backscattering that exceeds Rayleigh scattering limits by more than one order of magnitude. We measure attenuation less than 0.5 dB/km from 1,300 to 1,650 nm. By controlling the enhanced backscatter over a 1.5-km length, we compensate for this attenuation, resulting in a higher backscatter signal at the end of the fiber. We demonstrate that the scattering strength may be stabilized for operation at temperatures above 200°C for at least 3 weeks. We show that the deleterious signal distortion due to the Kerr nonlinearity is within 10% of standard fiber. We then report on the use of these fibers in distributed acoustic sensing (DAS) measurements. A significant increase in acoustic signal-to-noise ratio leads to the possibility of improved spatial resolution in the enhanced fiber DAS system.