ABSTRACT
Fundamental limits of cellular deformations, such as hyperextension of a living cell, remain poorly understood. Here, we describe how the single-celled protist Lacrymaria olor, a 40-micrometer cell, is capable of reversibly and repeatably extending its necklike protrusion up to 1200 micrometers in 30 seconds. We discovered a layered cortical cytoskeleton and membrane architecture that enables hyperextensions through the folding and unfolding of cellular-scale origami. Physical models of this curved crease origami display topological singularities, including traveling developable cones and cytoskeletal twisted domain walls, which provide geometric control of hyperextension. Our work unravels how cell geometry encodes behavior in single cells and provides inspiration for geometric control in microrobotics and deployable architectures.
Subject(s)
Cell Shape , Cell Surface Extensions , Ciliophora , Cytoskeleton , Cell Membrane/ultrastructure , Cytoskeleton/ultrastructure , Ciliophora/cytology , Ciliophora/physiology , Cell Surface Extensions/ultrastructure , Microtubules/ultrastructureABSTRACT
Eukaryotic cells undergo dramatic morphological changes during cell division, phagocytosis and motility. Fundamental limits of cellular morphodynamics such as how fast or how much cellular shapes can change without harm to a living cell remain poorly understood. Here we describe hyper-extensibility in the single-celled protist Lacrymaria olor, a 40 µm cell which is capable of reversible and repeatable extensions (neck-like protrusions) up to 1500 µm in 30 seconds. We discover that a unique and intricate organization of cortical cytoskeleton and membrane enables these hyper-extensions that can be described as the first cellular scale curved crease origami. Furthermore, we show how these topological singularities including d-cones and twisted domain walls provide a geometrical control mechanism for the deployment of membrane and microtubule sheets as they repeatably spool thousands of time from the cell body. We lastly build physical origami models to understand how these topological singularities provide a mechanism for the cell to control the hyper-extensile deployable structure. This new geometrical motif where a cell employs curved crease origami to perform a physiological function has wide ranging implications in understanding cellular morphodynamics and direct applications in deployable micro-robotics.
ABSTRACT
Centralized manufacturing and global supply chains have emerged as an efficient strategy for large-scale production of goods throughout the 20th century. However, while this system of production is highly efficient, it is not resilient. The COVID-19 pandemic has seen numerous supply chains fail to adapt to sudden changes in supply and demand, including those for goods critical to the pandemic response such as personal protective equipment. Here, we consider the production of the non-woven polypropylene filtration media used in face filtering respirators (FFRs). The FFR supply chain's reliance on non-woven media sourced from large, centralized manufacturing facilities led to a supply chain failure. In this study, we present an alternative manufacturing strategy that allows us to move towards a more distributed manufacturing practice that is both scalable and robust. Specifically, we demonstrate that a fiber production technique known as centrifugal melt spinning can be implemented with modified, commercially-available cotton candy machines to produce nano- and microscale non-woven fibers. We evaluate several post processing strategies to transform the produced material into viable filtration media and then characterize these materials by measuring filtration efficiency and breathability, comparing them against equivalent materials used in commercially-available FFRs. Additionally, we demonstrate that waste plastic can be processed with this technique, enabling the development of distributed recycling strategies to address the growing plastic waste crisis. Since this method can be employed at small scales, it allows for the development of an adaptable and rapidly deployable distributed manufacturing network for non-woven materials that is financially accessible to more people than is currently possible.
Subject(s)
COVID-19 , Pandemics , COVID-19/epidemiology , COVID-19/prevention & control , Humans , Pandemics/prevention & control , Personal Protective Equipment , Plastics , Ventilators, MechanicalABSTRACT
Global shortages of N95 respirators have led to an urgent need of N95 decontamination and reuse methods that are scientifically validated and available world-wide. Although several large scale decontamination methods have been proposed (hydrogen peroxide vapor, UV-C); many of them are not applicable in remote and low-resource settings. Heat with humidity has been demonstrated as a promising decontamination approach, but care must be taken when implementing this method at a grassroots level. Here we present a simple, scalable method to provide controlled humidity and temperature for individual N95 respirators which is easily applicable in low-resource settings. N95 respirators were subjected to moist heat (>50% relative humidity, 65-80°C temperature) for over 30 minutes by placing them in a sealed container immersed in water that had been brought to a rolling boil and removed from heat, and then allowing the containers to sit for over 45 minutes. Filtration efficiency of 0.3-4.99 µm incense particles remained above 97% after 5 treatment cycles across all particle size sub-ranges. This method was then repeated at a higher ambient temperature and humidity in Mumbai, using standard utensils commonly found in South Asia. Similar temperature and humidity profiles were achieved with no degradation in filtration efficiencies after 6 cycles. Higher temperatures (>70°C) and longer treatment times (>40 minutes) were obtained by insulating the outer vessel. We also showed that the same method can be applied for the decontamination of surgical masks. This simple yet reliable method can be performed even without electricity access using any heat source to boil water, from open-flame stoves to solar heating, and provides a low-cost route for N95 decontamination globally applicable in resource-constrained settings.
Subject(s)
COVID-19/prevention & control , Decontamination/methods , Equipment Reuse/statistics & numerical data , Hot Temperature , Humidity , Masks/standards , N95 Respirators/standards , Asia/epidemiology , COVID-19/epidemiology , COVID-19/transmission , COVID-19/virology , Filtration , Humans , SARS-CoV-2ABSTRACT
Here we adapt and evaluate a full-face snorkel mask for use as personal protective equipment (PPE) for health care workers, who lack appropriate alternatives during the COVID-19 crisis in the spring of 2020. The design (referred to as Pneumask) consists of a custom snorkel-specific adapter that couples the snorkel-port of the mask to a rated filter (either a medical-grade ventilator inline filter or an industrial filter). This design has been tested for the sealing capability of the mask, filter performance, CO2 buildup and clinical usability. These tests found the Pneumask capable of forming a seal that exceeds the standards required for half-face respirators or N95 respirators. Filter testing indicates a range of options with varying performance depending on the quality of filter selected, but with typical filter performance exceeding or comparable to the N95 standard. CO2 buildup was found to be roughly equivalent to levels found in half-face elastomeric respirators in literature. Clinical usability tests indicate sufficient visibility and, while speaking is somewhat muffled, this can be addressed via amplification (Bluetooth voice relay to cell phone speakers through an app) in noisy environments. We present guidance on the assembly, usage (donning and doffing) and decontamination protocols. The benefit of the Pneumask as PPE is that it is reusable for longer periods than typical disposable N95 respirators, as the snorkel mask can withstand rigorous decontamination protocols (that are standard to regular elastomeric respirators). With the dire worldwide shortage of PPE for medical personnel, our conclusions on the performance and efficacy of Pneumask as an N95-alternative technology are cautiously optimistic.
Subject(s)
Masks , Personal Protective Equipment , Personnel, Hospital , COVID-19/epidemiology , COVID-19/prevention & control , Carbon Dioxide/chemistry , Equipment Design , Exhalation , Filtration , Humans , Models, TheoreticalABSTRACT
Many single-celled protists use rapid morphology changes to perform fast animal-like behaviors. To understand how such behaviors are encoded, we analyzed the hunting dynamics of the predatory ciliate Lacrymaria olor, which locates and captures prey using the tip of a slender "neck" that can rapidly extend more than seven times its body length (500 µm from its body) and retract in seconds. By tracking single cells in real-time over hours and analyzing millions of sub-cellular postures, we find that these fast extension-contraction cycles underlie an emergent hunting behavior that comprehensively samples a broad area within the cell's reach. Although this behavior appears complex, we show that it arises naturally as alternating sub-cellular ciliary and contractile activities rearrange the cell's underlying helical cytoskeleton to extend or retract the neck. At short timescales, a retracting neck behaves like an elastic filament under load, such that compression activates a series of buckling modes that reorient the head and scramble its extensile trajectory. At longer timescales, the fundamental length of this filament can change, altering the location in space where these transitions occur. Coupling these fast and slow dynamics together, we present a simple model for how Lacrymaria samples the range of geometries and orientations needed to ensure dense stochastic sampling of the immediate environment when hunting to locate and strike at prey. More generally, coupling active mechanical and chemical signaling systems across different timescales may provide a general strategy by which mechanically encoded emergent cell behaviors can be understood or engineered.
Subject(s)
Ciliophora/metabolism , Predatory Behavior/physiology , Animals , Ecosystem , Microtubules/physiology , Muscle Contraction/physiologyABSTRACT
In tissues, cells reside in confining microenvironments, which may mechanically restrict the ability of a cell to double in size as it prepares to divide. How confinement affects cell cycle progression remains unclear. We show that cells progressed through the cell cycle and proliferated when cultured in hydrogels exhibiting fast stress relaxation but were mostly arrested in the G0/G1 phase of the cell cycle when cultured in hydrogels that exhibit slow stress relaxation. In fast-relaxing gels, activity of stretch-activated channels (SACs), including TRPV4, promotes activation of the phosphatidylinositol 3-kinase (PI3K)/Akt pathway, which in turn drives cytoplasmic localization of the cell cycle inhibitor p27Kip1, thereby allowing S phase entry and proliferation. Cell growth during G1 activated the TRPV4-PI3K/Akt-p27Kip1 signaling axis, but growth is inhibited in the confining slow-relaxing hydrogels. Thus, in confining microenvironments, cells sense when growth is sufficient for division to proceed through a growth-responsive signaling axis mediated by SACs.