ABSTRACT
Eco-driving has attracted great attention as a cost-effective and immediate measure to reduce fuel consumption significantly. Understanding the impact of driver behaviour on real driving emissions (RDE) is of great importance for developing effective eco-driving devices and training programs. Therefore, this study was conducted to investigate the performance of different drivers using a portable emission measurement system. In total, 30 drivers, including 15 novice and 15 experienced drivers, were recruited to drive the same diesel vehicle on the same route, to minimise the effect of uncontrollable real-world factors on the performance evaluation. The results show that novice drivers are less skilled or more aggressive than experienced drivers in using the accelerator pedal, leading to higher vehicle and engine speeds. As a result, fuel consumption rates of novice drivers vary in a slightly greater range than those of experienced drivers, with a marginally higher (2%) mean fuel consumption. Regarding pollutant emissions, CO and THC emissions of all drivers are well below the standard limits, while NOx and PM emissions of some drivers significantly exceed the limits. Compared with experienced drivers, novice drivers produce 17% and 29% higher mean NOx and PM emissions, respectively. Overall, the experimental results reject the hypothesis that driver experience has significant impacts on fuel consumption performance. The real differences lie in the individual drivers, as the worst performing drivers have significantly higher fuel consumption rates than other drivers, for both novice and experienced drivers. The findings suggest that adopting eco-driving skills could deliver significant reductions in fuel consumption and emissions simultaneously for the worst performing drivers, regardless of driving experience.
Subject(s)
Air Pollutants , Automobile Driving , Environmental Pollutants , Air Pollutants/analysis , Gasoline , Protective Devices , Vehicle Emissions/analysisABSTRACT
Urban street canyons formed by high-rise buildings restrict the dispersion of vehicle emissions, which pose severe health risks to the public by aggravating roadside air quality. However, this issue is often overlooked in city planning. This paper reviews the mechanisms controlling vehicle emission dispersion in urban street canyons and the strategies for managing roadside air pollution. Studies have shown that air pollution hotspots are not all attributed to heavy traffic and proper urban design can mitigate air pollution. The key factors include traffic conditions, canyon geometry, weather conditions and chemical reactions. Two categories of mitigation strategies are identified, namely traffic interventions and city planning. Popular traffic interventions for street canyons include low emission zones and congestion charges which can moderately improve roadside air quality. In comparison, city planning in terms of building geometry can significantly promote pollutant dispersion in street canyons. General design guidelines, such as lower canyon aspect ratio, alignment between streets and prevailing winds, non-uniform building heights and ground-level building porosity, may be encompassed in new development. Concurrently, in-street barriers are widely applicable to rectify the poor roadside air quality in existing street canyons. They are broadly classified into porous (e.g. trees and hedges) and solid (e.g. kerbside parked cars, noise fences and viaducts) barriers that utilize their aerodynamic advantages to ease roadside air pollution. Post-evaluations are needed to review these strategies by real-world field experiments and more detailed modelling in the practical perspective.
Subject(s)
Air Pollutants , Air Pollution , Air Pollutants/analysis , Air Pollution/analysis , Air Pollution/prevention & control , Cities , Models, Theoretical , Trees , Vehicle Emissions/analysis , WindABSTRACT
Street canyons are generally highly polluted urban environments due to high traffic emissions and impeded dispersion. Green infrastructure (GI) is one potential passive control system for air pollution in street canyons, yet optimum GI design is currently unclear. This review consolidates findings from previous research on GI in street canyons and assesses the suitability of different GI forms in terms of local air quality improvement. Studies on the effects of various GI options (trees, hedges, green walls, green screens and green roofs) are critically evaluated, findings are synthesised, and possible recommendations are summarised. In addition, various measurement methods used for quantifying the effectiveness of street greening for air pollution reduction are analysed. Finally, we explore the findings of studies that have compared plant species for pollution mitigation. We conclude that the influences of different GI options on air quality in street canyons depend on street canyon geometry, meteorological conditions and vegetation characteristics. Green walls, green screens and green roofs are potentially viable GI options in existing street canyons, where there is typically a lack of available planting space. Particle deposition to leaves is usually quantified by leaf washing experiments or by microscopy imaging techniques, the latter of which indicates size distribution and is more accurate. The pollutant reduction capacity of a plant species largely depends on its macromorphology in relation to the physical environment. Certain micromorphological leaf traits also positively correlate with deposition, including grooves, ridges, trichomes, stomatal density and epicuticular wax amount. The complexity of street canyon environments and the limited number of previous studies on novel forms of GI in street canyons mean that offering specific recommendations is currently unfeasible. This review highlights a need for further research, particularly on green walls and green screens, to substantiate their efficacy and investigate technical considerations.
Subject(s)
Air Pollutants , Air Pollution , Air Pollutants/analysis , Air Pollution/analysis , Air Pollution/prevention & control , Cities , Environmental Pollution , Quality Improvement , Trees , Vehicle Emissions/analysisABSTRACT
Air pollution with PM2.5 (particulate matter smaller than 2.5 micro-metres in diameter) is a major health hazard in many cities worldwide, but since measuring instruments have traditionally been expensive, monitoring sites are rare and generally show only background concentrations. With the advent of low-cost, wirelessly connected sensors, air quality measurements are increasingly being made in places where many people spend time and pollution is much worse: on streets near traffic. In the interests of enabling members of the public to measure the air that they breathe, we took an open-source approach to designing a device for measuring PM2.5. Parts are relatively cheap, but of good quality and can be easily found in electronics or hardware stores, or on-line. Software is open source and the free LoRaWAN-based "The Things Network" the platform. A number of low-cost sensors we tested had problems, but those selected performed well when co-located with reference-quality instruments. A network of the devices was deployed in an urban centre, yielding valuable data for an extended time. Concentrations of PM2.5 at street level were often ten times worse than at air quality stations. The devices and network offer the opportunity for measurements in locations that concern the public.
Subject(s)
Air Pollutants/analysis , Air Pollution/prevention & control , Community Participation , Environmental Monitoring/instrumentation , Particulate Matter/analysis , Air Pollution/adverse effects , Cities , Environmental Monitoring/methods , Humans , Limit of Detection , New South Wales , Particulate Matter/adverse effects , Vehicle Emissions/analysis , WildfiresABSTRACT
The increasing development of urban centers brings serious challenges for traffic management. In this paper, we introduce a smart visual sensor, developed for a pilot project taking place in the Australian city of Liverpool (NSW). The project's aim was to design and evaluate an edge-computing device using computer vision and deep neural networks to track in real-time multi-modal transportation while ensuring citizens' privacy. The performance of the sensor was evaluated on a town center dataset. We also introduce the interoperable Agnosticity framework designed to collect, store and access data from multiple sensors, with results from two real-world experiments.
ABSTRACT
The density and composition of microbial communities of subtidal sandy sediments determines their role in the cycling of nutrients in coastal waters. It has previously been found that sediments disturbed by waves and currents have reduced biomass, greater productivity to respiration (P/R) ratios and a tendency to take up nutrients. Conversely, with shelter and greater biomass, P/R ratios were smaller and nutrients released. This study, in warm temperate waters, examined the consequences of high and low levels of hydrodynamic energy on the microbial community structure and biogeochemistry at two locations at different times of year. Measurements included biomarkers, sediment properties and exchanges of gases and nutrients. Microbial communities were dominated by diatoms and bacteria. Exposed sites, relative to paired sheltered sites, had smaller ratios of bacteria to benthic microalgae (BMA), larger C/N ratios, smaller indices of diagenetic activity, but smaller P/R ratios. The bacteria in exposed sediments exhibited biomass-normalised rates of respiration almost double those in sheltered sediments. This increased activity was most likely fuelled by elevated concentrations of photosynthates, secreted by BMA attached to sand grains. Changes in community composition owing to different levels of disturbance led to shifts in functioning that resulted in consistently small exchanges of nutrients.
Subject(s)
Geologic Sediments/microbiology , Bacteria/chemistry , Bacteria/isolation & purification , Biomass , Carbon/analysis , Diatoms/chemistry , Diatoms/isolation & purification , Geologic Sediments/chemistry , Lipids/analysis , Nitrogen/analysis , Nitrogen Fixation , Oxygen/analysis , Pigments, Biological/analysis , Seawater , Silicon Dioxide , Water MicrobiologyABSTRACT
The destruction of mass cultures of microalgae by biological contamination of culture medium is a pervasive and expensive problem, in industry and research. A mathematical model has been formulated that attempts to explain contaminant growth dynamics in closed photobioreactors (PBRs). The model simulates an initial growth phase without PBR dilution, followed by a production phase in which culture is intermittently removed. Contaminants can be introduced at any of these stages. The model shows how exponential growth from low initial inocula can lead to "explosive" growth in the population of contaminants, appearing days to weeks after inoculation. Principal influences are contaminant growth rate, PBR dilution rate, and the size of initial contaminant inoculum. Predictions corresponded closely with observed behavior of two contaminants, Uronema sp. and Neoparamoeba sp., found in operating PBRs. A simple, cheap and effective protocol was developed for short-term prediction of contamination in PBRs, using microscopy and archived samples.
Subject(s)
Microalgae/growth & development , Microalgae/radiation effects , Microbial Consortia/physiology , Models, Biological , Photobioreactors/microbiology , Cell Proliferation/radiation effects , Computer Simulation , Light , Microbial Consortia/radiation effectsABSTRACT
The interactions between physical disturbances and biogeochemical cycling are fundamental to ecology. The benthic microbial community controls the major pathway of nutrient recycling in most shallow-water ecosystems. This community is strongly influenced by physical forcing and nutrient inputs. Our study tests the hypotheses that benthic microbial communities respond to shelter and enrichment with (1) increased biomass, (2) change in community composition and (3) increased uptake of inorganic nutrients from the water column. Replicate in situ plots were sheltered from physical disturbance and enriched with inorganic nutrients or left without additional nutrients. At t(0) and after 10 days, sediment-water fluxes of nutrients, O(2) and N(2) , were measured, the community was characterized with biomarkers. Autochthonous benthic microalgal (BMA) biomass increased 30% with shelter and a natural fivefold increase in nutrient concentration; biomass did not increase with greater enrichment. Diatoms remained the dominant taxon of BMA, suggesting that the sediments were not N or Si limited. Bacteria and other heterotrophic organisms increased with enrichment and shelter. Daily exchanges of inorganic nutrients between sediments and the water column did not change in response to shelter or nutrient enrichment. In these sediments, physical disturbance, perhaps in conjunction with nutrient enrichment, was the primary determinant of microbial biomass.
Subject(s)
Bacteria/growth & development , Ecological and Environmental Phenomena , Geologic Sediments/microbiology , Water Microbiology , Water Pollutants, Chemical/metabolism , Bacteria/metabolism , Biomass , Carbonates/chemistry , Diatoms/growth & development , Diatoms/physiology , Ecology , Ecosystem , Fresh Water , Geologic Sediments/chemistry , Nitrogen/analysis , Nitrogen/metabolism , Phosphorus/analysis , Phosphorus/metabolism , Water , Water Pollutants, Chemical/analysisABSTRACT
Community-level selection is an important concept in evolutionary biology and has been predicted to arise in systems that are spatially structured. Here we develop an experimental model for spatially-structured bacterial communities based on coaggregating strains and test their relative fitness under a defined selection pressure. As selection we apply protozoan grazing in a defined, continuous culturing system. We demonstrate that a slow-growing bacterial strain Blastomonas natatoria 2.1, which forms coaggregates with Micrococcus luteus, can outcompete a fast-growing, closely related strain Blastomonas natatoria 2.8 under conditions of protozoan grazing. The competitive benefit provided by spatial structuring has implications for the evolution of natural bacterial communities in the environment.