An update on microfluidic multi-organ-on-a-chip systems for reproducing drug pharmacokinetics: the current state-of-the-art.

INTRODUCTION: Advances in the accessibility of manufacturing technologies and iPSC-based modeling have accelerated the overall progress of organs-on-a-chip. Notably, the progress in multi-organ systems is not progressing with equal speed, indicating that there are still major technological barriers to overcome that may include biological relevance, technological usability as well as overall accessibility. AREAS COVERED: We here review the progress in the field of multi-tissue- and body-on-a-chip pre and post- SARS-CoV-2 pandemic and review five selected studies with increasingly complex multi-organ chips aiming at pharmacological studies. EXPERT OPINION: We discuss future and necessary advances in the field of multi-organ chips including how to overcome challenges regarding cell diversity, improved culture conditions, model translatability as well as sensor integrations to enable microsystems to cover organ-organ interactions in not only toxicokinetic but more importantly pharmacodynamic and -kinetic studies.

Development of a Flexible Sensor-Integrated Tissue Patch to Monitor Early Organ Rejection Processes Using Impedance Spectroscopy.

Heart failure represents a primary cause of hospitalization and mortality in both developed and developing countries, often necessitating heart transplantation as the only viable recovery path. Despite advances in transplantation medicine, organ rejection remains a significant post-operative challenge, traditionally monitored through invasive endomyocardial biopsies (EMB). This study introduces a rapid prototyping approach to organ rejection monitoring via a sensor-integrated flexible patch, employing electrical impedance spectroscopy (EIS) for the non-invasive, continuous assessment of resistive and capacitive changes indicative of tissue rejection processes. Utilizing titanium-dioxide-coated electrodes for contactless impedance sensing, this method aims to mitigate the limitations associated with EMB, including procedural risks and the psychological burden on patients. The biosensor's design features, including electrode passivation and three-dimensional microelectrode protrusions, facilitate effective monitoring of cardiac rejection by aligning with the heart's curvature and responding to muscle contractions. Evaluation of sensor performance utilized SPICE simulations, scanning electron microscopy, and cyclic voltammetry, alongside experimental validation using chicken heart tissue to simulate healthy and rejected states. The study highlights the potential of EIS in reducing the need for invasive biopsy procedures and offering a promising avenue for early detection and monitoring of organ rejection, with implications for patient care and healthcare resource utilization.

A multi-channel microfluidic platform based on human flavin-containing monooxygenase 3 for personalised medicine.

Human flavin-containing monooxygenase 3 (FMO3) is a drug-metabolizing enzyme (DME) which is known to be highly polymorphic. Some of its polymorphic variants are associated with inter-individual differences that contribute to drug response. In order to measure these differences, the implementation of a quick and efficient in vitro assay is highly desirable. To this end, in this work a microfluidic immobilized enzyme reactor (µ-IMER) was developed with four separate serpentines where FMO3 and its two common polymorphic variants (V257M and E158K) were covalently immobilized via glutaraldehyde cross-linking in the presence of a polylysine coating. Computational fluid dynamics simulations were performed to calculate the selected substrate retention time in serpentines with different surface areas at various flow rates. The oxidation of tamoxifen, an anti-breast cancer drug, was used as a model reaction to characterize the new device in terms of available surface area for immobilization, channel coating, and applied flow rate. The highest amount of product was obtained when applying a 10 µL min-1 flow rate on polylysine-coated serpentines with a surface area of 90 mm2 each. Moreover, these conditions were used to test the device as a multi-enzymatic platform by simultaneously assessing the conversion of tamoxifen by FMO3 and its two polymorphic variants immobilized on different serpentines of the same chip. The results obtained demonstrate that the differences observed in the conversion of tamoxifen within the chip are similar to those already published (E158K > WT > V257M). Therefore, this microfluidic platform provides a feasible option for fabricating devices for personalised medicine.

Using Rapid Prototyping to Develop a Cell-Based Platform with Electrical Impedance Sensor Membranes for In Vitro RPMI2650 Nasal Nanotoxicology Monitoring.

Due to advances in additive manufacturing and prototyping, affordable and rapid microfluidic sensor-integrated assays can be fabricated using additive manufacturing, xurography and electrode shadow masking to create versatile platform technologies aimed toward qualitative assessment of acute cytotoxic or cytolytic events using stand-alone biochip platforms in the context of environmental risk assessment. In the current study, we established a nasal mucosa biosensing platform using RPMI2650 mucosa cells inside a membrane-integrated impedance-sensing biochip using exclusively rapid prototyping technologies. In a final proof-of-concept, we applied this biosensing platform to create human cell models of nasal mucosa for monitoring the acute cytotoxic effect of zinc oxide reference nanoparticles. Our data generated with the biochip platform successfully monitored the acute toxicity and cytolytic activity of 6 mM zinc oxide nanoparticles, which was non-invasively monitored as a negative impedance slope on nasal epithelial models, demonstrating the feasibility of rapid prototyping technologies such as additive manufacturing and xurography for cell-based platform development.

Origin of Surface Charge of Double Network Hydrogels Prepared by Sequential Polymerization.

Understanding the physicochemical properties of hydrogel surfaces and their molecular origins is important for their applications. In this paper, we elucidate the molecular origin of surface charges in double-network hydrogels synthesized by two-step sequential polymerization. Synthesis of hydrogels by free-radical polymerization does not fully complete the reaction, leaving a small number of unreacted monomers. When this approach is used to synthesize double network (DN) hydrogels by a two-step sequential polymerization from charged monomers for the first network and neutral monomers for the second network, the unreacted first network monomers are incorporated into the second network. Since the surface of such DN hydrogels is covered with a µm-thick layer of the neutral second network, the incorporation of a small amount of charged monomers into the second network increases the surface charge and, thereby, their repulsive/adhesive properties. Therefore, we propose a method to remove unreacted monomers and modulate the surface charge density of DN hydrogels.

Force-triggered rapid microstructure growth on hydrogel surface for on-demand functions.

Living organisms share the ability to grow various microstructures on their surface to achieve functions. Here we present a force stamp method to grow microstructures on the surface of hydrogels based on a force-triggered polymerisation mechanism of double-network hydrogels. This method allows fast spatial modulation of the morphology and chemistry of the hydrogel surface within seconds for on-demand functions. We demonstrate the oriented growth of cells and directional transportation of water droplets on the engineered hydrogel surfaces. This force-triggered method to chemically engineer the hydrogel surfaces provides a new tool in addition to the conventional methods using light or heat, and will promote the wide application of hydrogels in various fields.

Rapid reprogramming of tumour cells into cancer stem cells on double-network hydrogels.

Cancer recurrence can arise owing to rare circulating cancer stem cells (CSCs) that are resistant to chemotherapies and radiotherapies. Here, we show that a double-network hydrogel can rapidly reprogramme differentiated cancer cells into CSCs. Spheroids expressing elevated levels of the stemness genes Sox2, Oct3/4 and Nanog formed within 24 h of seeding the gel with cells from any of six human cancer cell lines or with brain cancer cells resected from patients with glioblastoma. Human brain cancer cells cultured on the double-network hydrogel and intracranially injected in immunodeficient mice led to higher tumorigenicity than brain cancer cells cultured on single-network gels. We also show that the double-network gel induced the phosphorylation of tyrosine kinases, that gel-induced CSCs from primary brain cancer cells were eradicated by an inhibitor of the platelet-derived growth factor receptor, and that calcium channel receptors and the protein osteopontin were essential for the regulation of gel-mediated induction of stemness in brain cancer cells.

Chitin-Based Double-Network Hydrogel as Potential Superficial Soft-Tissue-Repairing Materials.

Chitin is a biopolymer, which has been proven to be a biomedical material candidate, yet the weak mechanical properties seriously limit their potentials. In this work, a chitin-based double-network (DN) hydrogel has been designed as a potential superficial repairing material. The hydrogel was synthesized through a double-network (DN) strategy composing hybrid regenerated chitin nanofiber (RCN)-poly (ethylene glycol diglycidyl ether) (PEGDE) as the first network and polyacrylamide (PAAm) as the second network. The hybrid RCN-PEGDE/PAAm DN hydrogel was strong and tough, possessing Young's modulus (elasticity) E 0.097 ± 0.020 MPa, fracture stress σf 0.449 ± 0.025 MPa, and work of fracture Wf 5.75 ± 0.35 MJ·m-3. The obtained DN hydrogel was strong enough for surgical requirements in the usage of soft tissue scaffolds. In addition, chitin endowed the DN hydrogel with good bacterial resistance and accelerated fibroblast proliferation, which increased the NIH3T3 cell number by nearly five times within 3 days. Subcutaneous implantation studies showed that the DN hydrogel did not induce inflammation after 4 weeks, suggesting a good biosafety in vivo. These results indicated that the hybrid RCN-PEGDE/PAAm DN hydrogel had great prospect as a rapid soft-tissue-repairing material.

Development of a Multifunctional Nanobiointerface Based on Self-Assembled Fusion-Protein rSbpA/ZZ for Blood Cell Enrichment and Phenotyping.

We present a multifunctional nanobiointerface for blood cell capture and phenotyping applications that features both excellent antifouling properties and high antibody activity. Multifunctionality is accomplished by modifying polymeric materials using self-assembled S-layer fusion-protein rSbpA/ZZ to immobilize high density antibodies at the two protein A binding sites of the rSbpA/ZZ nanolattice structure. Controlled orientation and alignment of the antibodies reduced antibody consumption 100-fold and increased cell capture efficiency 4-fold over standard methodologies. Cell analysis in complex samples was made possible by the remarkable antifouling properties of the rSbpA domain, while at the same time reducing unspecific binding and forgoing tedious blocking procedures. An automated microfluidic in situ cell analysis platform for isolation and phenotyping of primary peripheral blood mononuclear cells was developed as practical application. Results obtained using our automated microfluidic cell analysis platform showed that the multifunctional nanobiointerface can discriminate among T helper and cytotoxic T cells, and thymocytes. Additionally, on-chip cell capture under flow conditions using a high affinity CD 3 selective nanobiointerface preferentially isolated cells with strong surface marker expression. This means that our dynamic microfluidic cell purification method allows the enrichment of 773 CD 8 positive cytotoxic T cells out of a total blood cell population of 7728 PBMCs, which is an increase in cell enrichment of 8-fold with a purity of 85%.