ABSTRACT
[This corrects the article DOI: 10.1371/journal.pone.0302202.].
ABSTRACT
It is structurally pertinent to understudy the important roles the self-compacting concrete (SCC) yield stress and plastic viscosity play in maintaining the rheological state of the concrete to flow. It is also important to understand that different concrete mixes with varying proportions of fine to coarse aggregate ratio and their nominal sizes produce different and corresponding flow- and fill-abilities, which are functions of the yield stress/plastic viscosity state conditions of the studied concrete. These factors have necessitated the development of regression models, which propose optimal rheological state behavior of SCC to ensure a more sustainable concreting. In this research paper on forecasting the rheological state properties of self-compacting concrete (SCC) mixes by using the response surface methodology (RSM) technique, the influence of nominal sizes of the coarse aggregate has been studied in the concrete mixes, which produced experimental mix entries. A total of eighty-four (84) concrete mixes were collected, sorted and split into training and validation sets to model the plastic viscosity and the yield stress of the SCC. In the field applications, the influence of the sampling sizes on the rheological properties of the concrete cannot be overstretched due to the importance of flow consistency in SCC in order to achieve effective workability. The RSM is a symbolic regression analysis which has proven to exercise the capacity to propose highly performable engineering relationships. At the end of the model exercise, it was found that the RSM proposed a closed-form parametric relationship between the outputs (plastic viscosity and yield stress) and the studied independent variables (the concrete components). This expression can be applied in the design and production of SCC with performance accuracies of above 95% and 90%, respectively. Also, the RSM produced graphical prediction of the plastic viscosity and yield stress at the optimized state conditions with respect to the measured variables, which could be useful in monitoring the performance of the concrete in practice and its overtime assessment. Generally, the production of SCC for field applications are justified by the components in this study and experimental entries beyond which the parametric relations and their accuracies are to be reverified.
Subject(s)
Construction Materials , Rheology , Rheology/methods , Construction Materials/analysis , Viscosity , Materials Testing/methods , Forecasting/methodsABSTRACT
Cassava peel ash (CPA) is an abundant agricultural byproduct that has shown promise as an additional cementitious material in concrete manufacturing. This research study aims to optimize the incorporation of CPA in concrete blends using the central composite design (CCD) methodology to determine the most effective combination of ingredients for maximizing concrete performance. The investigation involves a physicochemical analysis of CPA to assess its pozzolanic characteristics. Laboratory experiments are then conducted to assess the compressive and flexural strengths of concrete mixtures formulated with varying proportions of CPA, cement, and aggregates. The results show that a mix ratio of 0.2:0.0875:0.3625:0.4625 for cement, CPA, fine, and coarse aggregates, respectively, yields a maximum compressive strength of 28.51 MPa. Additionally, a maximum flexural strength of 10.36 MPa is achieved with a mix ratio of 0.2:0.0875:0.3625:0.525. The experimental data were used to develop quadratic predictive models, followed by statistical analyses. The culmination of the research resulted in the identification of an optimal concrete blend that significantly enhances both compressive and flexural strength. To ensure the reliability of the model, rigorous validation was conducted using student's t-test, revealing a strong correlation between laboratory findings and simulated values, with computed p-values of 0.9987 and 0.9912 for compressive and flexural strength responses, respectively. This study underscores the potential for enhancing concrete properties and reducing waste through the effective utilization of CPA in the construction sector.
ABSTRACT
In this research paper, the intelligent learning abilities of the gray wolf optimization (GWO), multi-verse optimization (MVO), moth fly optimization, particle swarm optimization (PSO), and whale optimization algorithm (WOA) metaheuristic techniques and the response surface methodology (RSM) has been studied in the prediction of the mechanical properties of self-healing concrete. Bio-concrete technology stimulated by the concentration of bacteria has been utilized as a sustainable structural concrete for the future of the built environment. This is due to the recovery tendency of the concrete structures after noticeable structural failures. However, it requires a somewhat expensive exercise and technology to create the medium for the growth of the bacteria needed for this self-healing ability. The method of data gathering, analysis and intelligent prediction has been adopted to propose parametric relationships between the bacteria usage and the concrete performance in terms of strength and durability. This makes is cheaper to design self-healing concrete structures based on the optimized mathematical relationships and models proposed from this exercise. The performance of the models was tested by using the coefficient of determination (R2), root mean squared errors, mean absolute errors, mean squared errors, variance accounted for and the coefficient of error. At the end of the prediction protocol and model performance evaluation, it was found that the classified metaheuristic techniques outclassed the RSM due their ability to mimic human and animal genetics of mutation. Furthermore, it can be finally remarked that the GWO outclassed the other methods in predicting the concrete slump (Sl) with R2 of 0.998 and 0.989 for the train and test, respectively, the PSO outclassed the rest in predicting the flexural strength with R2 of 0.989 and 0.937 for train and test, respectively and the MVO outclassed the others in predicting the compressive strength with R2 of 0.998 and 0.958 for train and test, respectively.
Subject(s)
Algorithms , Prunella , Animals , Humans , Bacteria , Built Environment , Cetacea , Compressive StrengthABSTRACT
In this study, raw grinded groundnut shell (RGGNS) was used as a fine aggregate in the brick industry to reuse agricultural waste in building materials. In this study, an experimental approach was used to examine a new cement brick with raw groundnut shells integrated with compressive strength, water absorption and dry density optimization utilizing response surface methodology (RSM). The raw ground-nut shell content improved the fine aggregate performance of the 40%, 50%, and 60% samples. The 28-day high compressive strength with the raw ground-nut shell was 6.1 N/mm2 maximum, as needed by the technical standard. Samples made from 40%, 50%, and 60% raw groundnut shells yielded densities of 1.7, 2.2, and 1.9 kg/cm3 for groundnut shell (GNS) brick, respectively. A product's mechanical properties meet the IS code standard's minimum requirements. RSM was then utilized to develop a model for the addition of raw groundnut shell to concrete. R-square and Adeq precision values indicated that the results are highly significant, and equations for predicting compressive strength, water absorption, and dry density have been developed. In addition, optimization was performed on the RSM findings to determine the efficiency optimization of the model. Following the optimization results, experiments were conducted to determine the applicability of the optimized model.
ABSTRACT
The stiffness (K) and slenderness factor (λ) of a steel plate-based damper has been studied on the basis of elastic-inelastic-plastic buckling (EIP) modes and flexural/shear/flexural-shear failure mechanisms (FSF-S), which has been designed for the improvement of the behavior of concentrically braced frames. Steel plate-based dampers offer significant benefits in terms of mode shapes and failure mechanisms, contributing to improved dynamic performance, enhanced structural resilience, and increased safety of civil engineering structures. Their effectiveness in mitigating dynamic loads makes them a valuable tool for engineers designing structures to withstand extreme environmental conditions and seismic events. This study was undertaken by using the learning abilities of the response surface methodology (RSM), artificial neural network (ANN) and the evolutionary polynomial regression (EPR). Steel plate dampers are special structural designs used to withstand the effect of special loading conditions especially seismic effects. Its design based on the prediction of its stiffness (K) and slenderness factor (λ) cannot be overlooked in the present-day artificial intelligence technology. In this research work, thirty-three entries based on the steel plate damper geometrical properties were recorded and deployed for the intelligent forecast of the fundamental properties (λ and K). Design ratios of the steel plate damper properties were considered and models behavior was recorded. From the outcome of the model, it can be observed that even though the EPR and ANN in that order outclassed the other techniques, the RSM produced model minimization and maximization features of the desirability levels, color factor scales and 3D surface observation, which shows the real model behaviors. Overall, the EPR with R2 of 0.999 and 1.000 for the λ and K, respectively showed to be the decisive model but the RSM has features that can be beneficial to the structural design of the studied steel plate damper for a more robust and sustainable construction. With these performances recorded in this exercise, the techniques have shown their potential to be applied in the prediction of steel damper stiffness with optimized characteristic features to withstand structural stresses.
ABSTRACT
In this study, the replacement of raw rice husk, fly ash, and hydrated lime for fine aggregate and cement was evaluated in making raw rice husk-concrete brick. This study optimizes compressive strength, water absorption, and dry density of concrete brick containing recycled aggregates via Response Surface Methodology. The optimized model's accuracy is validated through Artificial Neural Network and Multiple Linear Regression. The Artificial Neural Network model captured the 100 data's variability from RSM optimization as indicated by the high R threshold- (R > 0.9997), (R > 0.99993), (R > 0.99997). Multiple Linear Regression model captured the data's variability the decent R2 threshold confirming- (R2 > 0.9855), (R2 > 0.9768), (R2 > 0.9155). The raw rice husk-concrete brick 28-day compressive strength, water absorption, and density prediction were more accurate when using Response Surface Methodology and Artificial Neural Network compared to Multiple Linear Regression. Lower MAE and RMSE, coupled with higher R2 values, unequivocally indicate the model's superior performance. Additionally, employing sensitivity analysis, the influence of the six input parameters on outcomes was assessed. Machine learning aids efficient prediction of concrete's mechanical properties, conserving time, labor, and resources in civil engineering.