ABSTRACT
BACKGROUND: Developing an alternative and benign method for DNA extraction is imperative due to the high cost and potential harms associated with conventional techniques. Investigation of Ionic liquid (IL) as a solvent for DNA storage and stability revealed the ability of IL to assist DNA processes. IL-based aqueous biphasic system emerges as a comprehensive extraction platform capitalizing on the task-specificity of ILs and the wide applicability of ABS for biomolecule extractions. Therefore, it is beneficial to optimize an IL-based ABS specifically for DNA extraction, taking into account the fundamental interactions between the IL and DNA. RESULTS: The primary objective was to design ABS consisting of Ammonium based ILs, and Potassium phosphate buffer as the salting-out agent for the partitioning of salmon sperm DNA. The analysis focused on optimizing biocompatible anions for the extraction. Moreover, the stability of the DNA in the IL rich phases was analysed to validate the method. The proposed process was then employed for extracting plasmid DNA from bacteria, demonstrating results comparable to those obtained with a commercially available kit. Further validation using agarose gel electrophoresis and transformation of the extracted DNA into E.coli were conducted, producing promising outcomes. Although there is room for improvement in terms of recovery of DNA and reusability of ABS, the described approach is comparable with the conventional one while being cost-effective, and showcases a noticeable and convincing link to eco-friendly processes. SIGNIFICANCE: There is limited literature on IL-based ABS for DNA extraction, and the existing studies predominantly concentrate on systems derived from Cholinium ILs. However, their high hydrophilicity limits the choice of the second-phase forming component to polymers for the formation of ABS. Ammonium ILs efficiently form biphasic systems with various available salting-out agents, and biocompatible anions are introduced to mitigate the toxicity of the ILs.
Subject(s)
DNA, Bacterial , Ionic Liquids , Ionic Liquids/chemistry , DNA, Bacterial/isolation & purification , Salmon , Animals , Escherichia coli/genetics , Escherichia coli/chemistry , Water/chemistryABSTRACT
A combined solvent system composed of an acidic and a neutral extractant is demonstrated as an effective system for the mutual separation of lanthanides and actinides from nitric acid solutions. The geometry and stability of various possible complexes formed under extraction and stripping conditions in a combined solvent system composed of N,N-dioctyl hydroxyacetamide (DOHyA) and bis(2-ethylhexyl)phosphoric acid (HDEHP) in the n-dodecane medium were studied both experimentally and theoretically. Experimental observations of the distribution ratios of Am(III) and Eu(III) in the combined solvent system revealed synergistic extraction of trivalent metal ions at all nitric acid concentrations. Density functional theory (DFT) calculations were employed to understand the geometric and electronic properties of the ligands and their corresponding complexes with Am(III) and Eu(III). The calculated results indicate that the feasibility and behaviour of complex formation in the combined solvent system using different methods are based on the energetic aspects of the formation reactions. The study also reveals the participation of the neutral and acid extractants in the combined solvent system facilitating the separation of Eu(III) and Am(III) from high-level liquid waste.
ABSTRACT
Ionic liquids (ILs) are liquid salts composed of cations and anions, known for their significant local heterogeneity at the molecular level. To understand the microheterogeneity with regard to their local polarity and local viscosity, we have used two structurally similar but chemically distinguishable fluorescent probes: Nile red (NR), a neutral molecule, and Nile blue sulfate (NBS), a charged molecule. A comparative study of the response of the two probes to the molecular level heterogeneity of ILs is expected to provide a better clarity of understanding regarding the charged polar domain and the uncharged hydrophobic domain of ILs. Towards this, we synthesized two butyrolactam-based protic ionic liquids (PILs), i.e., BTF and BTD, with the same ionic headgroup ([BT]+) and different alkyl tails ([RCOO]-), where {R = H, C11H23}. BTF has no significant hydrophobic domain, whereas BTD has a larger hydrophobic domain. Temperature-dependent fluorescence parameters such as fluorescence intensity, lifetime, and anisotropy were measured for both NR and NBS molecules. The use of a pair of structurally similar but ionically different probes enables differential estimation of parameters like the microviscosity of a domain using the fluorescence anisotropy parameter (r). The absorption and emission spectra of both probe molecules are observed to be blue shifted upon going from BTF to BTD. NR showed a significant blue shift in absorption and emission band maxima. Conversely, NBS exhibited a small wavelength shift, possibly influenced by the preferred location of their charged head group domain. Temperature-dependent rotational relaxation time (θ) of NR in BTD is smaller than that of NBS by 60-70%, indicating that stronger charge-charge interactions exist between the polar domain of BTD and NBS. Moreover, it is observed that the local viscosity of the BTF IL around both probes is similar, whereas there is a considerable difference for the BTD IL. These results are an indication that NBS being charged prefers to locate itself in the charged head group region of the IL, whereas NR being neutral tends to reside both in the hydrophobic domain and in the head group but is predominantly located in the hydrophobic domain.
ABSTRACT
Herein, acetic acid mediated multicomponent synthesis of novel 2,4-dimethoxy-tetrahydropyrimido[4,5-b]quinolin-6(7H)-one (2,4-dimethoxy-THPQs) was reported. Single-crystal XRD analysis of four newly developed crystals of 2,4-dimethoxy-THPQs and their DFT study were also reported. The structure of all molecules was optimized using DFT B3LYP/6-31G(d) level and compared with the corresponding single-crystal XRD data. As a result, the theoretical and experimental geometrical parameters (bond lengths and bond angles) were found to be in good agreement. Frontier molecular orbital (FMO) and molecule electrostatic potential (MEP) analyses were used to investigate the physicochemical properties and relative reactivity of 2,4-dimethoxy-THPQs. The formation of strong C-Hâ¯O and N-Hâ¯O interaction was investigated by Hirshfeld analysis. Furthermore, electronic charge density concentration in 2,4-dimethoxy-THPQs was analysed by the Mulliken atomic charges which helps to predict the ability of 2,4-dimethoxy-THPQs to bind in the receptor. The molecular docking of the crystal structure of 2,4-dimethoxy-THPQs in the main protease (Mpro) of SARS-CoV-2 suggested that all four 2,4-dimethoxy-THPQs efficiently docked in Mpro. Furthermore, 2,4-dimethoxy-THPQs with a 3-chloro substitution in the phenyl ring have the highest binding affinity because of the additional formation of halogen bonds and highest dipole moment.
ABSTRACT
Recently, deep eutectic solvent (DES) or ionic liquid (IL) analogues have been considered as the newest green solvent, demonstrating the potential to replace harsh volatile organic solvents. DESs are mainly a combination of two compounds: hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD), which have the ability to interact through extensive hydrogen bonds. A thorough understanding of their physicochemical properties is essential, given their successful applications on an industrial scale. The appropriate blend of HBA to HBD can easily fine-tune DES properties for desired applications. In this context, we have reviewed the basic information related to DESs, the two most studied physicochemical properties (density and viscosity), and their performance as a solvent in (i) drug delivery and (ii) extraction of biomolecules. A broader approach of various factors affecting their performance has been considered, giving a detailed picture of the current status of DESs in research and development.
ABSTRACT
Inclusion complexation is one of the best strategies for developing a controlled release of a toxic drug without unexpected side effects from the very beginning of the administration to the target site. In this study, three benzimidazolium based ionic liquids (ILs) having bromide anion and cation bearing long alkyl chains, hexyl- ([C6CFBim]Br), octyl- ([C8CFBim]Br), and decyl- ([C10CFBim]Br) were designed and synthesized as antibacterial drugs. Inclusion complexes (ICs) of studied ILs have been prepared by the combination of ß-cyclodextrin (ß-CD), considering these conjugations should enhance the benignity of ILs and make them potential candidates for the controlled drug release. Characterizations and structural analysis of studied ICs have been performed by 1H NMR, 2D-ROESY NMR, FT-IR, HRMS, TGA, DSC, surface tension, ionic conductivity, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC). Further, the morphology of the ICs has been analyzed by SEM and TEM. Furthermore, neat ILs and ICs have been treated against Escherichia coli and Bacillus subtilis to investigate their antibacterial activity, which confirms the prevention of bacterium growth and the shrinkage of the bacterial cell wall. The findings of this work provide the proof of concept that studied benzimidazolium based ILs-ß-CD host-guest complexes should act as a potential candidate in controlled drug delivery and other biomedical applications.
ABSTRACT
The academia and chemical industry are actively searching for alternative solvents to meet technology requirements since the most widely used solvents are harmful and volatile. For ionic liquids, there are several advantages over conventionally using organic membrane solvents, including high thermal stability, negligible vapour pressure, low volatility, etc. Here in this study, we have analyzed the abilities of ionic liquids as pure solvents as well as their binary mixtures, to recover phenolic compounds from the industrial wastewater. The field of phenol extraction from wastewater using ionic liquids remains less exposed, and we presume that the work of this kind would open up more and more opportunities for the scientific community as well as industrial people. Based on all these assumptions, the present work includes experimental data of a work which explains the possibilities of room temperature ionic liquids (RTILs) as potential bulk liquid membranes (BLM) for extracting phenol and other phenolic compounds from the industrial affluents. Four high hydrophobicity ionic liquids namely: 1-hexyl-3-methylimidazolium hexafluorophosphate [Hmim][PF6], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [Bmim][NTf2], 1-butyl-3-methylimidazolium hexafluorophosphate [Bmim] [PF6] and 1-ethyl-3-methyimidazolium bis(trifluoromethanesulfonyl) imide [Emim][NTf2] were used for investigating the Phenol extraction efficiency and stripping efficiency. To provide a best comprehension of the influence of the phenolic structure as well as the nature of cation on the extraction ability of the ILs, we tried to understand the molecular interactions between the phenolic compounds and the solvents. The influence of hydrophobicity of ionic liquids and different kinds of anions on the extraction of phenol and efficiencies of stripping were investigated. All the experimental investigations performed here indicated that the only cation part of the ionic liquid is not an important aspect directly in this extraction, but the hydrogen bonding and the solute-solvent interactions play a significant role in the phenol removal process from aqueous phase to IL phase. First, the optimal conditions of operating (settling time and stirring) were analyzed for the clarity of the experiments performed. Concentration of NaOH in enhancing the performance of ionic liquids was also inspected here in this study. A binary mixture of ionic liquids (BMILs) membrane was examined for the optimized parameters, and the efficiency of phenol extraction was analyzed with the efficiency obtained for the single ionic liquid (SIL) membranes. The phenol concentration was determined by UV/visible spectrophotometer absorbance measurements. The highest phenol extraction efficiencies of 91% and 98.5%, were achieved by using [Bmim][NTf2] and [Bmim][NTf2+PF6] respectively, and the higher stripping efficiencies came up with 79% and 84% respectively, for [Emim][NTf2] and [Bmim + Emim][NTf2]. The results show that the binary mixture ionic liquid (BMIL) membrane is a better choice than single ionic liquid (SIL) membrane solvents. Hence, [Bmim] [(NTf2+PF6)] is an excellent selection as it provides high phenol stripping and extraction efficiencies with a minimal solvent loss and better stability in transport process.
Subject(s)
Environmental Pollutants , Ionic Liquids , Humans , Ionic Liquids/chemistry , Phenol , Solvents/chemistry , WastewaterABSTRACT
This study explores the transport properties of bis(trifluoromethylsulfonyl)imide-based ionic liquids with a naturally derived (1R,2S,5R)-(-)-menthol moiety in the cationic part. In particular, we investigated the dependence of the dynamic viscosity and electrical conductivity as functions of the alkyl chain length. An important finding of this study is that both properties show nonmonotonic behavior with respect to the alkyl chain length. The nonmonotonic dependency is an obstacle for establishing the relationships between the structure and transport properties of homologues. To overcome this difficulty, we recommend fast property screening using a theoretical model that we developed, which allows for efficient viscosity prediction by means of the group contribution method. As demonstrated in this study, the model allows for reliable predictions of viscosity in the studied series with an overall relative deviation of less than 8%.
ABSTRACT
In this study, we report on antiproliferative benzyloxy dihydropyrimidinones (DHPMs) produced by the Biginelli reaction of benzyloxy benzaldehyde, urea, and diverse 1,3-diones. The reaction was catalyzed by lanthanum triflate and completed within 1-1.5 h, with 74-97% yield. The antiproliferative assay was carried out for all synthesized dihydropyrimidinones against six human solid tumor cell lines. Six compounds showed good antiproliferative activity with GI50 values below 5 µM. Among all the synthesized compounds, the most potent derivative showed good antiproliferative activity against all cell lines with GI50 values in the range of 1.1-3.1 µM. These DHPMs comply with druglikeness. Furthermore, ADMET prediction and the effect of P-glycoprotein on the antiproliferative activity were also studied. Overall, our method allows eco-friendly access to benzyloxy DHPMs as potential anticancer drugs.
Subject(s)
Antineoplastic Agents , Cell Proliferation/drug effects , Pyrimidinones , Antineoplastic Agents/chemical synthesis , Antineoplastic Agents/chemistry , Antineoplastic Agents/pharmacology , Cell Line, Tumor , Drug Screening Assays, Antitumor , Humans , Lanthanum/chemistry , Molecular Structure , Pyrimidinones/chemical synthesis , Pyrimidinones/chemistry , Pyrimidinones/pharmacology , Structure-Activity Relationship , Urea/chemistryABSTRACT
Despite the recent advancements in the field of deep eutectic solvents (DESs), their high viscosity often prevents practical applications. A versatile strategy to overcome this problem is either to add a co-solvent or to confine the DES inside a nanoscaled self-organized system. This work assesses the microstructures of a hydrated and nanoconfined DES comprising benzyltripropylammonium chloride [BTPA]Cl and ethylene glycol (EG). They act as a hydrogen-bond acceptor and a donor, respectively. The hydrogen bonding between [BTPA]Cl and EG in the DES (i.e., BTEG) and the molecular states of water in the hydrated BTEG were studied by Raman spectroscopy. The results show different hydrogen-bonding associations between water-water and water-BTEG or EG molecules. In addition, we investigated the confinement effects of BTEG in a Polysorbate 80 (Tween-80)/cyclohexane reverse micellar (RM) system. The results are compared with those of an ionic liquid-encapsulated RM system. The formation, bonding characteristics, and thermal stability of the RM droplets were studied by solubilization, dynamic light scattering, rheology, and Raman spectroscopy experiments. Furthermore, it is shown that hydrogen bonding between the DES and the surfactant leads to a stable RM system. Interestingly, the viscosity of the RM system is significantly lower than that of the neat DES suggesting that DESs have a much wider practical applicability in the form of RMs.
ABSTRACT
Correlation of the structure and properties of ionic liquids (ILs) is essential for the development of optimized materials in the fields of gas capture and separation, battery electrolytes, and cellulose dissolution processes. In view of this, a detailed vibrational spectroscopic analysis and quantum-chemical calculations were performed to explore the interionic interactions in ILs based on the N-methylpyrrolidone cation and a carboxylate anion. FTIR and Raman spectroscopy were applied to identify the hydrogen-bonding interactions between ion pairs, in which redshifted vibrational modes were observed as a function of the anion chain length. This observation was verified by the bond lengthening and enhanced hydrogen-bonding energies, as manifested in the structure and natural bond orbital (NBO) calculations. Furthermore, conductivity was measured at different temperatures to envisage the effect of the alkyl chain on the mobility of ions in the ILs. Finally, rheological measurements were implemented to explain the flow behavior of these ILs, which revealed a decrease in shear viscosity with an increase in temperature, that is, a Newtonian trend over a range of shear rates. The observed trend in transport properties was supported by the ion-pair binding energy. Stronger interactions between the IL cations and anions led to a decrease in the number of free ions and lowered the conductivity. In these protic ILs, the intermolecular N-Hâ â â O and C-Hâ â â O interactions played an important role in governing their physicochemical properties.
ABSTRACT
Considering the contemporary interests of water-free reverse micelles (RMs) in the field of organic reaction medium and potential drug delivery carrier, we synthesized two different classes of ionic liquids (ILs), protic N-methyl-2-pyrrolidonium hexanoate, [NMP][Hex], and aprotic choline hexanoate, [Chl][Hex], and subsequently incorporated them in a mixture of polyoxyethylene (20) sorbitan monooleate (Tween-80) and cyclohexane. In order to understand the differential nature of interinterionic interaction of two ILs, we performed DFT calculations on pure ILs to correlate with experimental results. The formation of IL-in-oil RMs was confirmed from phase behavior and DLS studies. Interestingly, [NMP][Hex]-based systems showed a larger monophasic region and droplet size along with higher shear viscosity compared to [Chl][Hex]-based systems. Stronger interaction between [NMP]+ and Tween-80 due to their protic nature might be the driving force for such observations which supported the resonance stabilization energy [E(2)] and charge population analysis by NBO calculation. Smaller E(2) values along with lesser NBO charges on atoms involved in H-bonding in pure [NMP][Hex] than [Chl][Hex] corroborated with the experimental observations. This primary hypothesis was further confirmed from FTIR and time-resolved fluorescence studies. These systems showed efficient thermal stability. Taking all of the results together, we anticipate that these RMs could be used as efficient delivery systems and for nanomaterial synthesis.
ABSTRACT
In an attempt to increase the stability and water uptake capacity of water-in-oil (W/O) microemulsions, here we study the physicochemical behavior of a series of protic ionic liquid based water/oil microemulsions, wherein solute amounts of biocompatible tetramethylguanidinium cation-based ionic liquids (ILs) are added to the aqueous phase of water-in-oil (W/O) microemulsions. FTIR and time-resolved fluorescence measurements showed an increased water uptake in these reverse micellar droplets, compared to conventional W/O microemulsions of similar compositions. Dynamic light scattering and differential scanning calorimetric measurements suggested greater thermal stability of the droplets in presence of the ILs. NMR and FTIR measurements and ab initio calculations explained these findings by showing an extended hydrogen bonding network between interfacial water and protic IL ions and strong electrostatic associations between the surfactant headgroups and IL anions. Our results pave the way for potential applications of protic ionic liquids in emulsion and microemulsion science and technology.
ABSTRACT
Ionic liquids (ILs) are being considered as greener alternatives to the conventional organic solvents. However, highly viscous nature of ILs often limits their applications. Hence studies on IL/water binary mixtures have received tremendous attention. These mixtures exhibit much lower viscosity, but almost similar density, compressibility and other properties as that of the neat ILs, up to certain water content. Hence, determining the IL-water ratio till which the solution behaves like IL and subsequently changes to a state of solute IL dissolved in continuous water phase is of paramount importance. Noting the very different and characteristic behaviours of neat ILs and pure water over a temperature range, herein, we measured the various thermophysical properties of the binary mixtures of tetramethylguanidinium benzoate/water and tetramethylguanidinium salicylate/water with water content varying from 20 wt% to 95 wt% for a temperature range of 298 K to 343 K. The results show that similar to neat ILs, the measured densities and compressibility of these mixtures display a linear change, and viscosity decreases rapidly as temperature is increased for water content up to 50 wt%. At higher water concentrations, the measured density and compressibility exhibit nonlinear behaviour and the decrease in viscosity with increased temperature is minute, mimicking the behaviour of bulk water. MD simulations were carried out to explain the experimental observations. Simulation results show a greater temperature-induced disintegration of IL ion-water interactions in dense systems, explaining the rapid decay of the properties with temperature. The results also exhibit the presence of a neat, IL-like, H-bond mediated expanded structure in concentrated solution versus a collapsed IL structure in dilute solution.
ABSTRACT
Interpreting the physiochemical properties and structure-property correlations of ionic liquids (ILs) is a key to the enlargement of their optimized structures for specific applications. In this work, a series of ILs based on 1-alkyl-1,2,4-triazolium cation with trifluoromethanesulfonate anion were synthesized and the effect of cation and temperature on physiochemical properties such as density, viscosity, speed of sound, conductivity, and rheology was studied. Temperature dependence densities were correlated with the densities estimated by the Gardas and Coutinho model, whereas viscosity and molar conductivity have been found to satisfy the Vogel-Tammann-Fulcher (VTF) equation over the studied temperature range 293.15-343.15 K. Further, to explore the wide range of applications, ionicity has been tested by correlating the fluidity with molar conductivity and it was found that synthesized ILs can be referred to as "good ILs". Furthermore, the fluidity behavior describing the interactions between the cation and anion of ILs was investigated through their rheological properties, and the Newtonian behavior of ILs has been examined by varying the effect of shear rate on viscosity. Finally, the impact of structure variants in terms of the N-1 functionalized 1,2,4-triazole ring has been analyzed over the studied properties.
ABSTRACT
Ionic liquids (ILs) have shown great potential in the dissolution and stability of biomolecules when a low-to-moderate quantity of water is added. Hence, determining the thermophysical properties and understanding these novel mixtures at the molecular level are of both fundamental and practical importance. In this context, here we report the synthesis of two nontoxic guanidinium cation based ILs, tetramethylguanidinium benzoate [TMG][BEN] and tetramethylguanidinium salicylate [TMG][SAL], and present a detailed comparison of their thermophysical properties in the presence of water. The results show that the [TMG][SAL]/water mixtures have higher density and higher apparent molar volume, but a lower viscosity and higher compressibility than the [TNG][BEN]/water mixtures. The measured viscosity and compressibility data are explained from ab initio quantum mechanical calculations and liquid-phase molecular dynamics simulations, where salicylate anions of denser [TMG][SAL]/water were found to exist as isolated ions due to intramolecular H-bonding. On the contrary, intermolecular H-bonding among the benzoate anions and their strong tendency to form an extended H-bonding network with water made [TMG][BEN]/water solutions more viscous and less compressible. This study shows the importance of probing these emerging solvents at the molecular-to-atomic level, which could be helpful in their optimal usage for task-specific applications.
Subject(s)
Guanidine/chemistry , Ionic Liquids/chemistry , Water/chemistry , Hydrogen Bonding , Ionic Liquids/chemical synthesis , Ions/chemistry , Molecular Dynamics Simulation , Quantum Theory , ViscosityABSTRACT
In this work, we report the thermodynamic and ultrasonic properties of ascorbic acid (vitamin C) in water and in presence of newly synthesized ammonium based protic ionic liquid (diethylethanolammonium propionate) as a function of concentration and temperature. Apparent molar volume and apparent molar isentropic compression, which characterize the solvation state of ascorbic acid (AA) in presence of protic ionic liquid (PIL) has been determined from precise density and speed of sound measurements at temperatures (293.15 to 328.15) K with 5 K interval. The strength of molecular interactions prevailing in ternary solutions has been discussed on the basis of infinite dilution partial molar volume and partial molar isentropic compression, corresponding volume of transfer and interaction coefficients. Result has been discussed in terms of solute-solute and solute-solvent interactions occurring between ascorbic acid and PIL in ternary solutions (AA + water + PIL).
Subject(s)
Ascorbic Acid/chemistry , Ammonium Compounds , Ionic Liquids , Solutions , Thermodynamics , Ultrasonics , WaterABSTRACT
The volumetric properties and taste behaviour of sucrose in aqueous solutions of a protic ionic liquid (3-hydroxypropylammonium acetate) have been studied at temperatures, T=(293.15-318.15)K and at atmospheric pressure. Apparent molar volumes, V2,Ï, apparent specific volumes, ASV, apparent molar isentropic compressibilities, Ks,2,Ï, and apparent specific isentropic compressibilities, ASIC, were calculated from measured density, ρ and speed of sound, u data. Partial molar volumes, V2(°), and partial molar isentropic compressibilities, Ks,2(°) at infinite dilution, transfer parameters (ΔtV2(°) and ΔtKs,2(°)), expansion coefficients, [(∂V2(°)/∂T)P and (∂(2)V2(°)/∂T(2))P], interaction coefficients, (YAB and YABB) and hydration numbers, Nw, were also evaluated and discussed in terms of solute-cosolute interactions. Further, the effect of protic ionic liquid on the taste behaviour of sucrose has been discussed from ASV and ASIC parameters, as these parameters, which are sensitive to solvation behaviour of solute, are divided into four basic taste qualities occupying certain ranges.
Subject(s)
Food Analysis/methods , Ionic Liquids/chemistry , Sucrose/chemistry , Taste , Water/chemistry , Acetates/chemistry , Disaccharides/chemistry , Ions , Pressure , Solutions , TemperatureABSTRACT
A series of alkyltributylphosphonium chloride ionic liquids, prepared from tributylphosphine and the respective 1-chloroalkane, C(n)H(2n+1)Cl (where n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 or 14), is reported. This work is a continuation of an extended series of tetraalkylphosphonium ionic liquids, where the focus is on the variability of n and its impact on the physical properties, such as melting points/glass transitions, thermal stability, density and viscosity. Experimental density and viscosity data were interpreted using QPSR and group contribution methods and the crystal structure of propyl(tributyl)phosphonium chloride is detailed.
ABSTRACT
A series of alkyltrioctylphosphonium chloride ionic liquids, prepared from trioctylphosphine, and the respective 1-chloroalkane (C(n)H(2n+1)Cl), where n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 or 14, is presented. The cynosure of this work is the manner in which the variable chain length impacts the physical properties, such as melting points/glass transitions, thermal stability, density and viscosity. Experimental density and viscosity data were interpreted using QPSR correlations and group contribution methods. We present the first example of an empirical alternation effect for ionic liquids.