ABSTRACT
The effect of carbon dioxide (CO2) on the desulfurization of sintering flue gas with hydrate (Ca(OH)2) as an absorbent was investigated, and the formation of calcium carbonate (CaCO3) and its effect on the desulfurization was discussed. The competitive relationship between carbon dioxide (CO2) and sulfur dioxide (SO2) with the deacidification agent in sintering flue gas is discussed thermodynamically, showing that sulfates are more likely to be generated under high oxygen potential conditions and that SO2 reacts more preferentially than CO2 under a thermodynamic standard state. The amount of produced CaCO3 increases under the condition that the CO2 concentration is absolutely dominant to SO2 in the sintering flue gas atmosphere. The effect of temperature, humidity and CO2 concentration on the desulfurization of Ca(OH)2 are discussed experimentally. The increasing temperature is not conducive to desulfurization, and the humidity can promote desulfurization, while excessive humidity could inhibit desulfurization. The suitable relative humidity is 20%. In situ generated calcium carbonate has a certain desulfurization effect, but the desulfurization effect is not as good as Ca(OH)2. However, a large proportion of CaCO3 was produced in the desulfurization ash under the condition that CO2 concentration was absolutely dominant to SO2 in the sintering flue gas atmosphere.
ABSTRACT
The magnetic properties and magnetocaloric effect (MCE) of ternary intermetallic RE2Cu2Cd (RE = Dy and Tm) compounds and its composite materials have been investigated in detail. Both compounds undergo a paramagnetic to ferromagnetic transition at its own Curie temperatures of TC ~ 48.5 and 15 K for Dy2Cu2Cd and Tm2Cu2Cd, respectively, giving rise to the large reversible MCE. An additionally magnetic transition can be observed around 16 K for Dy2Cu2Cd compound. The maximum values of magnetic entropy change (-ΔSMmax) are estimated to be 17.0 and 20.8 J/kg K for Dy2Cu2Cd and Tm2Cu2Cd, for a magnetic field change of 0-70 kOe, respectively. A table-like MCE in a wide temperature range of 10-70 K and enhanced refrigerant capacity (RC) are achieved in the Dy2Cu2Cd - Tm2Cu2Cd composite materials. For a magnetic field change of 0-50 kOe, the maximum improvements of RC reach 32% and 153%, in comparison with that of individual compound Dy2Cu2Cd and Tm2Cu2Cd. The excellent MCE properties suggest the RE2Cu2Cd (RE = Dy and Tm) and its composite materials could be expected to have effective applications for low temperature magnetic refrigeration.