Fortification of water kefir with magnetite nanoparticles.

The aim of this work was to evaluate the suitability of incorporating Fe3O4 (magnetite, M) NPs into water kefir (wKef) beverages. Magnetite NPs were synthesized and coated with pectins (cM), and incorporated into wKef beverages obtained by fermentation of a muscovado sugar solution with wKef grains. FeSO4, usually employed as fortifier, was used as a control. Four different beverages were analyzed: wKef, wKef-cM, wKef-M, wKef-FeSO4, indicating wKef beverages fortified with cM, M or FeSO4, respectively. Their stability was assessed by determining the viability of total lactic acid bacteria and yeasts, and the composition of saccharides along storage at 4 °C for up to 30 days. The toxicity of M and cM was evaluated in an in vivo model of Artemia salina. The absorption of iron was quantified by determining ferritin values on intestinal Caco-2/TC7 cells, and its internalization mechanisms, by employing inhibitors of endocytic pathways and quantifying ferritin. M and cM were non-toxic on Artemia salina up to 500 µg/mL, a toxicity even lower than that of FeSO4, which showed a LD50 of 304.08 µg/mL. After 30 days of storage, no significant decrease on yeasts viability was observed, and bacteria viability was above 6 log CFU/mL for the four beverages. In turn, sucrose decreased to undetectable values, concomitantly to an increase in the concentrations of glucose and fructose. Both wKef-M and wKef-cM led to a significant increase in the ferritin values (up to 2 folds) with regard to the basal state. The internalization of M NPs occurred via clathrins and caveolin pathways, whereas that of cM, by macropinocytosis. Safely incorporating M and cM NPs into wKef beverages appear as an innovative strategy for providing bioavailable iron aiming to ameliorate the nutritional status of populations at risk of iron deficiency (e.g., vegans).

Development and characterization of iron-pectin beads as a novel system for iron delivery to intestinal cells.

Iron deficiency is the most common nutritional deficit worldwide. The goal of this work was to obtain iron-pectin beads by ionic gelation and evaluate their physiological behavior to support their potential application in the food industry. The beads were firstly analyzed by scanning electronic microscopy, and then physical-chemically characterized by performing swelling, thermogravimetric, porosimetry, Mössbauer spectroscopy and X-ray fluorescence analyses, as well as by determining the particle size. Then, physiological assays were carried out by exposing the beads to simulated gastric and intestinal environments, and determining the iron absorption and transepithelial transport into Caco-2/TC7 cells. Iron-pectin beads were spherical (diameter 1-2 mm), with high density (1.29 g/mL) and porosity (93.28%) at low pressure, indicating their high permeability even when exposed to low pressure. Swelling in simulated intestinal medium (pH 8) was higher than in simulated gastric medium. The source of iron [FeSO4 (control) or iron-pectin beads] did not have any significant effect on the mineral absorption. Regarding transport, the iron added to the apical pole of Caco-2/TC7 monolayers was recovered in the basal compartment, and this was proportional with the exposure time. After 4 h of incubation, the transport of iron arising from the beads was significantly higher than that of the iron from the control (FeSO4). For this reason, iron-pectin beads appear as an interesting system to overcome the low efficiency of iron transport, being a potential strategy to enrich food products with iron, without altering the sensory properties.

Valorization of okara oil for the encapsulation of Lactobacillus plantarum.

Oil-in-water (O/W) emulsions of okara oil-caseinate (1:2; 1:3 and 1:4 O/W ratios) were used to encapsulate Lactobacillus plantarum CIDCA 83114. Once encapsulated, microorganisms were freeze-dried or spray-dried, and observed by scanning electronic and confocal microscopies. A physical characterization of the dehydrated capsules was carried out by determining their moisture content, water activity, particle size, polydispersity index and zeta potential. Determining the induction times and peroxide values provided information about their susceptibility to oxidation. In turn, bacterial stability was analyzed by plate counting before and after freeze-drying and spray-drying, and during storage at 4°C. Spray-dried emulsions had lower Z-sizes and polydispersity indexes, higher induction times and lower peroxide values than the freeze-dried ones, thus resulting better systems to protect L. plantarum CIDCA 83114. In addition, the culturability of spray-dried bacteria did not decrease neither after spray-drying nor up to 60days of storage at 4°C. The results showed that the better physical-chemical stability of spray-dried capsules determined the greater stability of microorganisms. This demonstrates the importance of defining adequate emulsions' formulations for an efficient encapsulation of microorganisms, with promising applications in the development of novel functional foods.

Role of S-layer proteins in bacteria.

S-layers are paracrystalline bidimensional arrays of proteins or glycoproteins that overlay the cell surface of several genus and species of bacteria and archaea. As the outermost layer of several genus and species of microorganisms, S-layer proteins (SLP) are in direct contact with bacterial environment and thus may be involved in many of their surface properties, including adherence to various substrates, mucins and eukaryotic cells, aggregation and coaggregation with yeasts and other bacteria. In addition, SLP have been reported to be responsible for the bacterial protection against detrimental environmental conditions and to play an important role in surface recognition or as carriers of virulence factors. In this mini-review, we bring together the latest evidences about functional and mechanical properties of bacterial SLP from two different perspectives: (A) their role on bacterial adherence to different substrates and surfaces, and (B) their role as mechanical barriers in bacterial harmful environments.

Use of Raman spectroscopy and chemometrics for the quantification of metal ions attached to Lactobacillus kefir.

AIMS: To set-up an experimental and analytical methodology to evaluate the feasibility of developing simple, accurate and quantitative models based on Raman spectroscopy and multivariate analysis for the quantification of metal ions adsorbed to the bacterial surface of Lactobacillus kefir. METHODS AND RESULTS: One millilitre cultures from two strains of Lact. kefir in the stationary phase were harvested and washed twice with ultra pure water. The bacterial pellets were resuspended into 1 ml solutions of Pb(+2), Cd(+2) or Ni(+2) ranging from 0 to 0·9 mmol l(-1). The suspensions were further incubated for 1 h at 30°C at pH 5·5. After centrifugation, the pellets were kept to register the Raman spectra and the supernatants were used for the analytical determination of Pb(+2) , Cd(+2) and Ni(+2). Micro-organisms nontreated with metal ions were used as controls. Principal component analysis (PCA) was performed over the preprocessed Raman spectra to evaluate whether the clusters obtained could be correlated with the concentration of metal ions attached to the bacterial biomass. After that, partial least squares (PLS) models were calibrated with the aim of quantifying the metal ions adsorbed to the bacterial surface. According to the analytical determinations, the maximum binding capacity of all the metals (q(max)) attained values that are comparable with those observed for other lactic acid bacteria (ca. 0·200 mmol g(-1)). The spectral analysis revealed that the main functional groups involved in the bacteria/metal interaction are carboxylates, phosphates and polysaccharides. In PCA, the first two principal components explain more than 72% variance of the spectral data set contained in the data structure, allowing a clear discrimination among samples of different concentrations. Based on this information and using as reference the results obtained by analytical methods, PLS prediction models were successfully defined for the quantification of Pb(+2), Cd(+2) and Ni(+2) attached to the bacterial surface. CONCLUSIONS: The calibration and validation of methods based on multivariate analysis allowed the definition of models for the quantification of Pb(+2), Cd(+2) and Ni(+2) attached to bacterial surfaces. The high percentages of explained variances in PCA gave a strong support to calibrate the prediction models, depicting very good correlations with the reference method (correlations ∼0·90 in all cases). SIGNIFICANCE AND IMPACT OF THE STUDY: Lactobacillus kefir CIDCA 8348 and JCM 5818 bind Pb(+2), Cd(+2) and Ni(+2) in an efficient way. This fact gives support for their potential use as sequestrants of traces of these metals in products addressed to human and animal consume. The prediction models developed would be useful for the determination of the investigated metal ions in unknown samples giving at the same time, structural information about this interaction. This is certainly the most important contribution of this work.

Functionality of exopolysaccharides produced by lactic acid bacteria in an in vitro gastric system.

AIMS: To evaluate whether slime-exopolysaccharides (EPS) or capsular-polysaccharide (CPS) production could protect the polymer-producing strains Streptococcus thermophilus CRL 1190 and Lactobacillus casei CRL 87 against the harsh conditions of an in vitro gastric system (GS). EPS stability on the GS was studied. METHODS AND RESULTS: An in vitro GS model containing human saliva and gastric juice was standardized. Polymer functionality on the cell viability and metabolic activity of the EPS-producing strains in the GS acidic conditions was evaluated. Two isogenic EPS/CPS deficient mutants were used for comparison. EPS or CPS conferred no significant protection on the cell viability of the studied strains after passage through the GS conditions. However, the phospho- and beta-galactosidase activities of the EPS(+) strains were higher than those of the EPS(-). Cytoplasmic alterations in the wild-type and mutant strains and partial degradation of both EPS were detected. CONCLUSIONS: The presence of EPS/CPS protected the metabolic activity of the assayed LAB strains, but had no effect on survival at low pH. SIGNIFICANCE AND IMPACT OF THE STUDY: The presence of EPS/CPS as well as polymer resistance to the harsh conditions of the human GS could impact positively in probiotic strains to exert their properties in the host.