Spatially fractionated radiation therapy: a critical review on current status of clinical and preclinical studies and knowledge gaps.

Spatially fractionated radiation therapy (SFRT) is a therapeutic approach with the potential to disrupt the classical paradigms of conventional radiation therapy. The high spatial dose modulation in SFRT activates distinct radiobiological mechanisms which lead to a remarkable increase in normal tissue tolerances. Several decades of clinical use and numerous preclinical experiments suggest that SFRT has the potential to increase the therapeutic index, especially in bulky and radioresistant tumors. To unleash the full potential of SFRT a deeper understanding of the underlying biology and its relationship with the complex dosimetry of SFRT is needed. This review provides a critical analysis of the field, discussing not only the main clinical and preclinical findings but also analyzing the main knowledge gaps in a holistic way.

Spatially Fractionated Radiation Therapy in Sarcomas: A Large Single-Institution Experience.

Purpose: Spatially fractionated radiation therapy (SFRT) is a recognized technique for enhancing tumor response in radioresistant and bulky tumors. We analyzed clinical and treatment outcomes in patients with bone and soft tissue sarcomas treated with modern SFRT techniques. Methods and Materials: Patients with metastatic or unresectable sarcoma treated with brass collimator, volumetric modulated arc therapy lattice, or proton SFRT from December 2019 to June 2022 were retrospectively reviewed. Consolidative external beam radiation therapy (EBRT) was delivered at the physician's discretion. Patient and treatment characteristics, treatment response (symptom improvement, local control, and imaging response), and toxicity data were collected. Results: The cohort consisted of 53 patients treated with 61 SFRT treatments. Median age at treatment was 60.0 years. The primary location was soft tissue in 46 courses (75%) and bone in 15 (25%). Fifty-three courses (87%) were treated for symptom relief. The most used SFRT technique was volumetric modulated arc therapy lattice (n = 52, 85%) to a dose of 20 Gy (n = 48, 79%; range, 16-20 Gy). EBRT was delivered post-SFRT in 55 (90%) treatment courses with a median time interval from SFRT to EBRT of 5 days (range, 0-14 days). Median physical EBRT dose and fractionation was 40 Gy (range, 9-73.5 Gy) and 10 fractions (range, 3-33 fractions). Median follow up was 7.4 months (range, 0.2-30 months). One-year overall survival and local control rates were 53% and 82%. Symptom relief was documented with 32 treatment courses (60%). Stable or partial response was observed with 47 treatment courses (90%). Four grade 3 to 4 acute and subacute toxicities were attributable to SFRT (8%). Conclusions: The current series is the largest to date documenting outcomes for SFRT in sarcomas. Our results suggest combined SFRT with EBRT is associated with a favorable toxicity profile and high rates of symptomatic and radiographic responses for metastatic or unresectable sarcomas.

Automated target placement for VMAT lattice radiation therapy: enhancing efficiency and consistency.

Objective. An algorithm was developed for automated positioning of lattice points within volumetric modulated arc lattice radiation therapy (VMAT LRT) planning. These points are strategically placed within the gross tumor volume (GTV) to receive high doses, adhering to specific separation rules from adjacent organs at risk (OARs). The study goals included enhancing planning safety, consistency, and efficiency while emulating human performance.Approach. A Monte Carlo-based algorithm was designed to optimize the number and arrangement of lattice points within the GTV while considering placement constraints and objectives. These constraints encompassed minimum spacing between points, distance from OARs, and longitudinal separation along thez-axis. Additionally, the algorithm included an objective to permit, at the user's discretion, solutions with more centrally placed lattice points within the GTV. To validate its effectiveness, the automated approach was compared with manually planned treatments for 24 previous patients. Prior to clinical implementation, a failure mode and effects analysis (FMEA) was conducted to identify potential shortcomings.Main results.The automated program successfully met all placement constraints with an average execution time (over 24 plans) of 0.29 ±0.07 min per lattice point. The average lattice point density (# points per 100 c.c. of GTV) was similar for automated (0.725) compared to manual placement (0.704). The dosimetric differences between the automated and manual plans were minimal, with statistically significant differences in certain metrics like minimum dose (1.9% versus 1.4%), D5% (52.8% versus 49.4%), D95% (7.1% versus 6.2%), and Body-GTV V30% (20.7 c.c. versus 19.7 c.c.).Significance.This study underscores the feasibility of employing a straightforward Monte Carlo-based algorithm to automate the creation of spherical target structures for VMAT LRT planning. The automated method yields similar dose metrics, enhances inter-planner consistency for larger targets, and requires fewer resources and less time compared to manual placement. This approach holds promise for standardizing treatment planning in prospective patient trials and facilitating its adoption across centers seeking to implement VMAT LRT techniques.

Overview and Recommendations for Prospective Multi-institutional Spatially Fractionated Radiation Therapy Clinical Trials.

PURPOSE: The highly heterogeneous dose delivery of spatially fractionated radiation therapy (SFRT) is a profound departure from standard radiation planning and reporting approaches. Early SFRT studies have shown excellent clinical outcomes. However, prospective multi-institutional clinical trials of SFRT are still lacking. This NRG Oncology/American Association of Physicists in Medicine working group consensus aimed to develop recommendations on dosimetric planning, delivery, and SFRT dose reporting to address this current obstacle toward the design of SFRT clinical trials. METHODS AND MATERIALS: Working groups consisting of radiation oncologists, radiobiologists, and medical physicists with expertise in SFRT were formed in NRG Oncology and the American Association of Physicists in Medicine to investigate the needs and barriers in SFRT clinical trials. RESULTS: Upon reviewing the SFRT technologies and methods, this group identified challenges in several areas, including the availability of SFRT, the lack of treatment planning system support for SFRT, the lack of guidance in the physics and dosimetry of SFRT, the approximated radiobiological modeling of SFRT, and the prescription and combination of SFRT with conventional radiation therapy. CONCLUSIONS: Recognizing these challenges, the group further recommended several areas of improvement for the application of SFRT in cancer treatment, including the creation of clinical practice guidance documents, the improvement of treatment planning system support, the generation of treatment planning and dosimetric index reporting templates, and the development of better radiobiological models through preclinical studies and through conducting multi-institution clinical trials.

Sublobar Resection, Stereotactic Body Radiation Therapy, and Percutaneous Ablation Provide Comparable Outcomes for Lung Metastasis-Directed Therapy.

BACKGROUND: Prolonged survival of patients with metastatic disease has furthered interest in metastasis-directed therapy (MDT). RESEARCH QUESTION: There is a paucity of data comparing lung MDT modalities. Do outcomes among sublobar resection (SLR), stereotactic body radiation therapy (SBRT), and percutaneous ablation (PA) for lung metastases vary in terms of local control and survival? STUDY DESIGN AND METHODS: Medical records of patients undergoing lung MDT at a single cancer center between January 2015 and December 2020 were reviewed. Overall survival, local progression, and toxicity outcomes were collected. Patient and lesion characteristics were used to generate multivariable models with propensity weighted analysis. RESULTS: Lung MDT courses (644 total: 243 SLR, 274 SBRT, 127 PA) delivered to 511 patients were included with a median follow-up of 22 months. There were 47 local progression events in 45 patients, and 159 patients died. Two-year overall survival and local progression were 80.3% and 63.3%, 83.8% and 9.6%, and 4.1% and 11.7% for SLR, SBRT, and PA, respectively. Lesion size per 1 cm was associated with worse overall survival (hazard ratio, 1.24; P = .003) and LP (hazard ratio, 1.50; P < .001). There was no difference in overall survival by modality. Relative to SLR, there was no difference in risk of local progression with PA; however, SBRT was associated with a decreased risk (hazard ratio, 0.26; P = .023). Rates of severe toxicity were low (2.1%-2.6%) and not different among groups. INTERPRETATION: This study performs a propensity weighted analysis of SLR, SBRT, and PA and shows no impact of lung MDT modality on overall survival. Given excellent local control across MDT options, a multidisciplinary approach is beneficial for patient triage and longitudinal management.

Salvage therapy expands highly cytotoxic and metabolically fit resilient CD8+ T cells via ME1 up-regulation.

Patients with advanced cancers who either do not experience initial response to or progress while on immune checkpoint inhibitors (ICIs) receive salvage radiotherapy to reduce tumor burden and tumor-related symptoms. Occasionally, some patients experience substantial global tumor regression with a rebound of cytotoxic CD8+ T cells. We have termed the rebound of cytotoxic CD8+ T cells in response to salvage therapy as T cell resilience and examined the underlying mechanisms of resilience. Resilient T cells are enriched for CX3CR1+ CD8+ T cells with low mitochondrial membrane potential, accumulate less reactive oxygen species (ROS), and express more malic enzyme 1 (ME1). ME1 overexpression enhanced the cytotoxicity and expansion of effector CD8+ T cells partially via the type I interferon pathway. ME1 also increased mitochondrial respiration while maintaining the redox state balance. ME1 increased the cytotoxicity of peripheral lymphocytes from patients with advanced cancers. Thus, preserved resilient T cells in patients rebound after salvage therapy and ME1 enhances their resiliency.

Clinical aspects of spatially fractionated radiation therapy treatments.

PURPOSE: To provide clinical guidance for centers wishing to implement photon spatially fractionated radiation therapy (SFRT) treatments using either a brass grid or volumetric modulated arc therapy (VMAT) lattice approach. METHODS: We describe in detail processes which have been developed over the course of a 3-year period during which our institution treated over 240 SFRT cases. The importance of patient selection, along with aspects of simulation, treatment planning, quality assurance, and treatment delivery are discussed. Illustrative examples involving clinical cases are shown, and we discuss safety implications relevant to the heterogeneous dose distributions. RESULTS: SFRT can be an effective modality for tumors which are otherwise challenging to manage with conventional radiation therapy techniques or for patients who have limited treatment options. However, SFRT has several aspects which differ drastically from conventional radiation therapy treatments. Therefore, the successful implementation of an SFRT treatment program requires the multidisciplinary expertise and collaboration of physicians, physicists, dosimetrists, and radiation therapists. CONCLUSIONS: We have described methods for patient selection, simulation, treatment planning, quality assurance and delivery of clinical SFRT treatments which were built upon our experience treating a large patient population with both a brass grid and VMAT lattice approach. Preclinical research and patient trials aimed at understanding the mechanism of action are needed to elucidate which patients may benefit most from SFRT, and ultimately expand its use.

A Dosimetric Comparison of Lattice, Brass, and Proton Grid Therapy Treatment Plans.

PURPOSE: Our purpose was to dosimetrically compare volumetric modulated arc therapy (VMAT) lattice radiation therapy (LRT), brass, and proton grid therapy planning techniques and suggest potential clinical applications for each. METHODS AND MATERIALS: Four plans delivering 20 Gy in 1 fraction were created for each of 22 patients. Brass and proton grid plans used a single static field and the same beam angle. Proton grid plans used the same beam size and spacing as the brass block. Two VMAT LRT plans were generated for each patient: one with 1-cm diameter lattice points spaced 2-cm center-to-center (2-cm VMAT) and another with 1.5-cm diameter lattice points spaced 3-cm center-to-center (3- cm VMAT). Maximum, minimum, mean, and equivalent uniform dose and the dose to 90%, 50%, 20%, 10%, and 5% (D90%[%], D50%[%], etc) of gross tumor volume (GTV) were reported. D10%/D90% characterized dose heterogeneity. Normal tissue dose was generalized by the maximum dose and volume in cubic centimeters of tissue outside the GTV receiving 30% and 50% of prescription (body-GTV V30%[cm3]; body-GTV V50%[cm3]). RESULTS: VMAT LRT plans delivered the highest maximum GTV doses while brass and proton plans delivered higher D5%(%), D10%(%), and D20%(%) values. D50%(%), D90%(%), and minimum dose varied little between plan types. Proton and brass plans had the highest dose heterogeneity. Two-centimeter VMAT and brass grid plans had the highest mean GTV doses. Two-centimeter VMAT plans had the highest equivalent uniform dose, followed by 3-cm VMAT, brass, and proton plans. VMAT LRT plans exhibited the lowest normal tissue maximum and body GTV V30%(cm3) and body GTV V50%(cm3) values. CONCLUSIONS: An in-depth comparison of target and normal tissue dosimetric parameters for common photon and proton grid therapy planning techniques was made. Strengths of each plan type were noted leading to general recommendations on usage.

A Dosimetric Parameter Reference Look-Up Table for GRID Collimator-Based Spatially Fractionated Radiation Therapy.

Computations of heterogeneity dose parameters in GRID therapy remain challenging in many treatment planning systems (TPS). To address this difficulty, we developed reference dose tables for a standard GRID collimator and validate their accuracy. The .decimal Inc. GRID collimator was implemented within the Eclipse TPS. The accuracy of the dose calculation was confirmed in the commissioning process. Representative sets of simulated ellipsoidal tumours ranging from 6-20 cm in diameter at a 3-cm depth; 16-cm ellipsoidal tumours at 3, 6, and 10 cm in depth were studied. All were treated with 6MV photons to a 20 Gy prescription dose at the tumour center. From these, the GRID therapy dosimetric parameters (previously recommended by the Radiosurgery Society white paper) were derived. Differences in D5 through D95 and EUD between different tumour sizes at the same depth were within 5% of the prescription dose. PVDR from profile measurements at the tumour center differed from D10/D90, but D10/D90 variations for the same tumour depths were within 11%. Three approximation equations were developed for calculating EUDs of different prescription doses for three radiosensitivity levels for 3-cm deep tumours. Dosimetric parameters were consistent and predictable across tumour sizes and depths. Our study results support the use of the developed tables as a reference tool for GRID therapy.

Implementation of free breathing respiratory amplitude-gated treatments.

PURPOSE: The purpose of this study was to provide guidance in developing and implementing a process for the accurate delivery of free breathing respiratory amplitude-gated treatments. METHODS: A phase-based 4DCT scan is acquired at time of simulation and motion is evaluated to determine the exhale phases that minimize respiratory motion to an acceptable level. A phase subset average CT is then generated for treatment planning and a tracking structure is contoured to indicate the location of the target or a suitable surrogate over the planning phases. Prior to treatment delivery, a 4DCBCT is acquired and a phase subset average is created to coincide with the planning phases for an initial match to the planning CT. Fluoroscopic imaging is then used to set amplitude gate thresholds corresponding to when the target or surrogate is in the tracking structure. The final imaging prior to treatment is an amplitude-gated CBCT to verify both the amplitude gate thresholds and patient positioning. An amplitude-gated treatment is then delivered. This technique was commissioned using an in-house lung motion phantom and film measurements of a simple two-field 3D plan. RESULTS: The accuracy of 4DCBCT motion and target position measurements were validated relative to 4DCT imaging. End to end testing showed strong agreement between planned and film measured dose distributions. Robustness to interuser variability and changes in respiratory motion were demonstrated through film measurements. CONCLUSIONS: The developed workflow utilizes 4DCBCT, respiratory-correlated fluoroscopy, and gated CBCT imaging in an efficient and sequential process to ensure the accurate delivery of free breathing respiratory-gated treatments.

VMAT Grid Therapy: A Widely Applicable Planning Approach.

PURPOSE: To describe a novel and practical volumetric modulated arc therapy (VMAT) planning approach for grid therapy. METHODS AND MATERIALS: Dose is prescribed to 1.5-cm diameter spherical contours placed throughout the gross tumor volume (GTV). Placement of spheres is variable, but they must maintain at least a 3-cm (center to center) separation, and the edge of any sphere must be at least 1 cm from any organ at risk (OAR). Three concentric ring structures are used during optimization to confine the highest doses to the center of the spheres and maximize dose sparing between them. The end result is alternating regions of high and low dose throughout the GTV and minimal dose to OARs. High-intensity flattening filter-free (FFF) modes are used to efficiently deliver the plans, and entire treatments typically take only 15 to 20 minutes. RESULTS: The approach is illustrated with 2 examples treated at our institution. Patient #1 had a 1703-cm3 mediastinal mass and was prescribed 20 Gray (Gy) to 24 spherical regions within the GTV. Patient #2 had a 3680-cm3 abdominal tumor and was prescribed 18 Gy to 32 spherical regions within the GTV. Both patients received additional consolidative radiation approximately 1 week after the initial VMAT grid treatment. Each patient experienced marked reduction in tumor size and symptomatic relief without treatment-related complications. CONCLUSIONS: We have described in detail a planning approach for VMAT grid therapy treatments that can typically be delivered in a clinically practical time span. The VMAT approach is especially useful for tumors that are surrounded by sensitive critical structures. As many centers offer VMAT treatments, the approach is widely accessible and can be readily implemented once appropriate patient selection and delivery processes are established.

Report of AAPM Task Group 235 Radiochromic Film Dosimetry: An Update to TG-55.

The use of radiochromic film (RCF) dosimetry in radiation therapy is extensive due to its high level of achievable accuracy for a wide range of dose values and its suitability under a variety of measurement conditions. However, since the publication of the 1998 AAPM Task Group 55, Report No. 63 on RCF dosimetry, the chemistry, composition, and readout systems for RCFs have evolved steadily. There are several challenges in using the new RCFs, readout systems and validation of the results depending on their applications. Accurate RCF dosimetry requires understanding of RCF selection, handling and calibration methods, calibration curves, dose conversion methods, correction methodologies as well as selection, operation and quality assurance (QA) programs of the readout systems. Acquiring this level of knowledge is not straight forward, even for some experienced users. This Task Group report addresses these issues and provides a basic understanding of available RCF models, dosimetric characteristics and properties, advantages and limitations, configurations, and overall elemental compositions of the RCFs that have changed over the past 20 yr. In addition, this report provides specific guidelines for data processing and analysis schemes and correction methodologies for clinical applications in radiation therapy.

Methodology for radiochromic film analysis using FilmQA Pro and ImageJ.

Radiochromic film (RCF) has several advantageous characteristics which make it an attractive dosimeter for many clinical tasks in radiation oncology. However, knowledge of and strict adherence to complicated protocols in order to produce accurate measurements can prohibit RCF from being widely adopted in the clinic. The purpose of this study was to outline some simple and straightforward RCF fundamentals in order to help clinical medical physicists perform accurate RCF measurements. We describe a process and methodology successfully used in our practice with the hope that it saves time and effort for others when implementing RCF in their clinics. Two RCF analysis software programs which differ in cost and complexity, the commercially available FilmQA Pro package and the freely available ImageJ software, were used to show the accuracy, consistency and limitations of each. The process described resulted in a majority of the measurements across a wide dose range to be accurate within ± 2% of the intended dose using either FilmQA Pro or ImageJ.

A linear relationship for the LET-dependence of Gafchromic EBT3 film in spot-scanning proton therapy.

Radiochromic film (RCF) is a valuable dosimetric tool, primarily due to its sub-millimeter spatial resolution. For accurate proton dosimetry, the dependence of film response on linear energy transfer (LET) must be characterized and calibrated. In this work, we characterized film under-response, or 'quenching', as a function of dose-weighted linear energy transfer (LETd) in several proton fields and established a simple, linear relationship with LETd. We performed measurements as a function of depth in a PMMA phantom irradiated by a spot-scanning proton beam. The fields had energies of 71.3 MeV, 71.3 MeV with filter, and 159.9 MeV. At each depth (measurements taken in depth step sizes of 0.5-1 mm in the Bragg peak), we measured dose with a PTW Markus ion chamber and EBT3 RCF. EBT3 under-response was characterized by the ratio of dose measured with film to that with ion chamber. LETd values for our experimental setup were calculated using in-house clinical Monte Carlo code. Measured film under-response increased with LETd, from approximately 10% under-response for LETd = 5 keV µm-1 to approximately 20% for LETd = 8 keV µm-1. The under-response for all measurements was plotted versus LETd. A linear fit to the data was performed, yielding a function for under-response, [Formula: see text], with respect to LETd: [Formula: see text]. Finally, the linear under-response relationship was applied to a film measurement within a spread-out Bragg peak (SOBP). Without correcting for LETd-dependence in the SOBP measurement, the discrepancy between film and Monte Carlo profiles was greater than 15% at the distal edge. With correction, the corrected film profile was within 2% and 1 mm of the Monte Carlo profile. RCF response depends on LETd, potentially under-responding by >15% in clinically-relevant scenarios. Therefore, it is insufficient to perform only a dose calibration; LET calibration is also necessary for accurate proton film dosimetry. The LETd-dependence of EBT3 can be described by a single, linear function over a range of clinically-relevant proton therapy LETd values.

Phantom Verification of AAA and Acuros Dose Calculations for Lung Cancer: Do Tumor Size and Regression Matter?

PURPOSE: This study aimed to evaluate dose calculation accuracy for the Eclipse Analytical Anisotropic Algorithm (AAA) and Acuros XB algorithm for various lung tumor sizes and to investigate dosimetric changes associated with treatment of regressing tumors. METHODS AND MATERIALS: A water phantom with cylindrical cork inserts (lung surrogates) was fabricated. Large (202 cm3), medium (54 cm3), and small (3 cm3) solid water tumors were implanted within cork inserts. A plain cork insert was used to simulate a lung without a tumor. The cork inserts and tumors were cut along the long axis, and Gafchromic film was placed between the sections to measure dose distributions. Three-dimensional conformal plans were created using 6 MV and 10 MV beams, and volumetric modulated arc therapy plans were created using 6 MV beams for each tumor size. Doses were calculated using Eclipse AAA and Acuros XB. The measured and calculated dose distributions were compared for each tumor size and treatment algorithm. To simulate a regressing tumor, the original plans created for the large tumor were separately delivered to the phantom that contained a small, medium, or no tumor. The dosimetric effects were evaluated using gamma passing rates with a 2%/2 mm criterion and dose profile comparisons. RESULTS: Agreement between the measurements and AAA calculations decreased as tumor size decreased, but Acuros XB showed better agreement for all tumor sizes. The largest difference was observed for a 6 MV volumetric modulated arc therapy plan created to treat the smallest tumor. The gamma passing rate was 89.7% but that of Acuros was 99.5%. For the tumor regression evaluation, the gamma passing rates ranged from 53% to 99% for AAA. For Acuros XB, the gamma passing rates were >98% for all scenarios. CONCLUSION: Both AAA and Acuros XB calculated the dose accurately for the largest lung tumor. For the smallest and regressing tumors, Acuros XB more accurately modelled the dose distribution compared with AAA.

Design and clinical use of a rotational phantom for dosimetric verification of IMRT/VMAT treatments.

PURPOSE: To describe the design and clinical use of a rotational phantom for dosimetric verification of IMRT/VMAT treatment plans using radiochromic film. METHODS: A solid water cylindrical phantom was designed with separable upper and lower halves and rests on plastic bearings allowing for 360° rotation about its central axis. The phantom accommodates a half sheet of radiochromic film, and by rotating the cylinder, the film can be placed in any plane between coronal and sagittal. Calculated dose planes coinciding with rotated film measurements are exported by rotating the CT image and dose distribution within the treatment planning system. The process is illustrated with 2 rotated film measurements of an SRS treatment plan involving 4 separate targets. Additionally, 276 patient specific QA measurements were obtained with the phantom and analyzed with a 2%/2 mm gamma criterion. RESULTS: The average 2%/2 mm gamma passing rate for all 276 plans was 99.3%. Seventy-two of the 276 plans were measured with the plane of the film rotated between the coronal and sagittal planes and had an average passing rate of 99.4%. CONCLUSIONS: The rotational phantom allows for accurate film measurements in any plane. With this technique, regions of a dose distribution which might otherwise require multiple sagittal or coronal measurements can be verified with as few as a single measurement. This increases efficiency and, in combination with the high spatial resolution inherent to film dosimetry, makes the rotational technique an attractive option for patient-specific QA.

Technique for the administration of high-dose-rate brachytherapy to the bile duct using a nasobiliary catheter.

PURPOSE: Cholangiocarcinoma patients who are potential candidates for liver transplantation may be treated with high-dose-rate (HDR) brachytherapy using a minimally invasive nasobiliary catheter in an effort to escalate the radiotherapy dose to the tumor and maximize local control rates. This work describes the equipment, procedures, and quality assurance (QA) that enables successful administration. METHODS AND MATERIALS: This work describes the nasobiliary catheter placement, simulation, treatment planning, treatment delivery, and QA. In addition, a chart review was performed of all patients who received endoscopic retrograde cholangiopancreatography for HDR bile duct brachytherapy at our institution from 2007 to 2017. The review evaluated how many patients were treated and the number of patients who could not be treated because of anatomic and/or equipment limitations. RESULTS: From 2007 to 2017, 122 cholangiocarcinoma patients have been treated with HDR brachytherapy using a nasobiliary catheter. Three patients underwent catheter placement but did not receive brachytherapy treatment due to catheter migration between placement and treatment or because the HDR afterloader was unable to extend the source wire into the treatment site. Periodic QA is recommended for ensuring whether the HDR afterloader is capable of extending the source wire through an extensive and curved path. CONCLUSIONS: Intraluminal HDR brachytherapy with a nasobiliary catheter can be successfully administered. Procedures and QA are described for ensuring safety and overcoming technical challenges.

Image-guided radiotherapy quality control: Statistical process control using image similarity metrics.

PURPOSE: The purpose of this study was to demonstrate an objective quality control framework for the image review process. METHODS AND MATERIALS: A total of 927 cone-beam computed tomography (CBCT) registrations were retrospectively analyzed for 33 bilateral head and neck cancer patients who received definitive radiotherapy. Two registration tracking volumes (RTVs) - cervical spine (C-spine) and mandible - were defined, within which a similarity metric was calculated and used as a registration quality tracking metric over the course of treatment. First, sensitivity to large misregistrations was analyzed for normalized cross-correlation (NCC) and mutual information (MI) in the context of statistical analysis. The distribution of metrics was obtained for displacements that varied according to a normal distribution with standard deviation of σ = 2 mm, and the detectability of displacements greater than 5 mm was investigated. Then, similarity metric control charts were created using a statistical process control (SPC) framework to objectively monitor the image registration and review process. Patient-specific control charts were created using NCC values from the first five fractions to set a patient-specific process capability limit. Population control charts were created using the average of the first five NCC values for all patients in the study. For each patient, the similarity metrics were calculated as a function of unidirectional translation, referred to as the effective displacement. Patient-specific action limits corresponding to 5 mm effective displacements were defined. Furthermore, effective displacements of the ten registrations with the lowest similarity metrics were compared with a three dimensional (3DoF) couch displacement required to align the anatomical landmarks. RESULTS: Normalized cross-correlation identified suboptimal registrations more effectively than MI within the framework of SPC. Deviations greater than 5 mm were detected at 2.8σ and 2.1σ from the mean for NCC and MI, respectively. Patient-specific control charts using NCC evaluated daily variation and identified statistically significant deviations. This study also showed that subjective evaluations of the images were not always consistent. Population control charts identified a patient whose tracking metrics were significantly lower than those of other patients. The patient-specific action limits identified registrations that warranted immediate evaluation by an expert. When effective displacements in the anterior-posterior direction were compared to 3DoF couch displacements, the agreement was ±1 mm for seven of 10 patients for both C-spine and mandible RTVs. CONCLUSIONS: Qualitative review alone of IGRT images can result in inconsistent feedback to the IGRT process. Registration tracking using NCC objectively identifies statistically significant deviations. When used in conjunction with the current image review process, this tool can assist in improving the safety and consistency of the IGRT process.

Head and Neck Radiation Dose and Radiation Safety for Interventional Physicians.

OBJECTIVES: The first aim of this study was to assess the magnitude of radiation dose to tissues of the head and neck of physicians performing x-ray-guided interventional procedures. The second aim was to assess protection of tissues of the head offered by select wearable radiation safety devices. BACKGROUND: Radiation dose to tissues of the head and neck is of significant interest to practicing interventional physicians. However, methods to estimate radiation dose are not generally available, and furthermore, some of the available research relating to protection of these tissues is misleading. METHODS: Using a single representative geometry, scatter radiation dose to a humanoid phantom was measured using radiochromic film and normalized by the radiation dose to the left collar of the radioprotective thorax apron. Radiation protection offered by leaded glasses and by a radioabsorbent surgical cap was measured. RESULTS: In the test geometry, average radiation doses to the unprotected brain, carotid arteries, and ocular lenses were 8.4%, 17%, and 50% of the dose measured at the left collar, respectively. Two representative types of leaded glasses reduced dose to the ocular lens on the side of the physician from which the scatter originates by 27% to 62% but offered no protection to the contralateral eye. The radioabsorbent surgical cap reduced brain dose by only 3.3%. CONCLUSIONS: A method by which interventional physicians can estimate dose to head and neck tissues on the basis of their personal dosimeter readings is described. Radiation protection of the ocular lenses by leaded glasses may be incomplete, and protection of the brain by a radioabsorbent surgical cap was minimal.