ABSTRACT
Systemic sclerosis (SSc) is characterized by intractable multiorgan fibrosis caused by vascular and immune dysfunction. Currently, effective therapeutic options for patients with SSc are limited. Nitrate, an abundant nutrient in the diet, has been demonstrated to be preventative and therapeutic for several diseases. To determine whether nitrate can slow or reverse SSc progression, topical application of nitrate delivered by dissolving microneedles was used to treat a bleomycin-induced dermal fibrosis mouse model. In this study, nitrate considerably attenuated dermal thickness, stiffness, and collagen deposition. Bulk RNA sequencing of skin revealed that Cd4 was a key hub gene in SSc nitrate therapy. In addition, bleomycin-induced cytokines and chemokines were inhibited by nitrate, and CD4+ T cells infiltration markedly declined. Il4, Il6, Il13, and Tgfb expressions in CD4+ T cells isolated from skin biopsies also significantly decreased. Mechanistically, Il1rl1, a type 2 immune response inducer, was markedly repressed in isolated CD4+ T cells and dermal tissues after nitrate treatment. Remarkably, compared with wild-type mice, mice lacking Il1rl1 showed impaired transcriptional profiles after intradermal bleomycin injection. Adoptive transfer of ST2+CD4+ T cells promoted bleomycin-induced Rag2-/- mice dermal fibrosis. Collectively, these findings demonstrate that nitrate targeting ST2+CD4+ T cells is an effective therapeutic option for SSc.
ABSTRACT
Monitoring homeostasis is an essential aspect of obtaining pathophysiological insights for treating patients. Accurate, timely assessments of homeostatic dysregulation in deep tissues typically require expensive imaging techniques or invasive biopsies. We introduce a bioresorbable shape-adaptive materials structure that enables real-time monitoring of deep-tissue homeostasis using conventional ultrasound instruments. Collections of small bioresorbable metal disks distributed within thin, pH-responsive hydrogels, deployed by surgical implantation or syringe injection, allow ultrasound-based measurements of spatiotemporal changes in pH for early assessments of anastomotic leaks after gastrointestinal surgeries, and their bioresorption after a recovery period eliminates the need for surgical extraction. Demonstrations in small and large animal models illustrate capabilities in monitoring leakage from the small intestine, the stomach, and the pancreas.
Subject(s)
Absorbable Implants , Anastomotic Leak , Gastrointestinal Tract , Ultrasonics , Animals , Humans , Homeostasis , Stomach , Gastrointestinal Tract/surgery , Anastomotic Leak/diagnostic imaging , Models, AnimalABSTRACT
The fluorescent detection of neutral and volatile carbonyl halogenated compounds had not been studied before. We describe here a simple and sensitive turn-on rhodamin fluorescent probe for the selective detection of fluorinated/brominated/chlorinated/iodinated carbonyl compounds. A wide range of linear or cyclic volatile organic halides was detected with a limit of detection as low as 45.6 nM within 1 min. Mechanistic experiments and DFT calculations indicate the reversible formation of a 1:1 complex of sensor and analyst through non-bonding interaction.
ABSTRACT
The reduction of mercaptans plays an important role in diverse areas such as protein synthesis, polymer science, environmental study, and pharmaceutical chemistry. Despite significant advancements in this area, particularly in light-induced transformations, review articles have rarely been reported on this topic. Thus, this review article emphasizes the direct photoinduced desulfurization and functionalization of thiols to alkanes or coupling products, with a focus on significant advancements made in the last decade. The progress is discussed according to the types of bonds formed from the cleavage of Csp3-SH bonds.
ABSTRACT
Eco/bioresorbable electronics represent an emerging class of technology defined by an ability to dissolve or otherwise harmlessly disappear in environmental or biological surroundings after a period of stable operation. The resulting devices provide unique capabilities as temporary biomedical implants, environmental sensors, and related systems. Recent publications report schemes to overcome challenges in fabrication that follow from the low thermostability and/or high chemical reactivity of the eco/bioresorbable constituent materials. Here, this work reports the use of high-speed sewing machines, as the basis for a high-throughput manufacturing technique that addresses many requirements for these applications, without the need for high temperatures or reactive solvents. Results demonstrate that a range of eco/bioresorbable metal wires and polymer threads can be embroidered into complex, user-defined conductive patterns on eco/bioresorbable substrates. Functional electronic components, such as stretchable interconnects and antennas are possible, along with fully integrated systems. Examples of the latter include wirelessly powered light-emitting diodes, radiofrequency identification tags, and temporary cardiac pacemakers. These advances add to a growing range of options in high-throughput, automated fabrication of eco/bioresorbable electronics.
Subject(s)
Absorbable Implants , Electronics , Metals , Polymers , SolventsABSTRACT
Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a serious complication that occurs in patients with osteoporosis or metastatic bone cancer treated with bisphosphonate. There is still no effective treatment and prevention strategy for BRONJ. Inorganic nitrate, which is abundant in green vegetables, has been reported to be protective in multiple diseases. To investigate the effects of dietary nitrate on BRONJ-like lesions in mice, we utilized a well-established mouse BRONJ model, in which tooth extraction was performed. Specifically, 4 mM sodium nitrate was administered in advance through drinking water to assess the short- and long-term effects on BRONJ. Zoledronate injection could induce severe healing inhibition of the tooth extraction socket, while addition of pretreating dietary nitrate could alleviate the inhibition by reducing monocyte necrosis and inflammatory cytokines production. Mechanistically, nitrate intake increased plasma nitric oxide levels, which attenuated necroptosis of monocytes by downregulating lipid and lipid-like molecule metabolism via a RIPK3 dependent pathway. Our findings revealed that dietary nitrate could inhibit monocyte necroptosis in BRONJ, regulate the bone immune microenvironment and promote bone remodelling after injury. This study contributes to the understanding of the immunopathogenesis of zoledronate and supports the feasibility of dietary nitrate for the clinical prevention of BRONJ.
Subject(s)
Bisphosphonate-Associated Osteonecrosis of the Jaw , Bone Density Conservation Agents , Mice , Animals , Zoledronic Acid/pharmacology , Nitrates , Diphosphonates/adverse effects , Bisphosphonate-Associated Osteonecrosis of the Jaw/etiology , Bisphosphonate-Associated Osteonecrosis of the Jaw/pathology , Bisphosphonate-Associated Osteonecrosis of the Jaw/therapy , Disease Models, Animal , Bone Remodeling , LipidsABSTRACT
Vocal fatigue is a measurable form of performance fatigue resulting from overuse of the voice and is characterized by negative vocal adaptation. Vocal dose refers to cumulative exposure of the vocal fold tissue to vibration. Professionals with high vocal demands, such as singers and teachers, are especially prone to vocal fatigue. Failure to adjust habits can lead to compensatory lapses in vocal technique and an increased risk of vocal fold injury. Quantifying and recording vocal dose to inform individuals about potential overuse is an important step toward mitigating vocal fatigue. Previous work establishes vocal dosimetry methods, that is, processes to quantify vocal fold vibration dose but with bulky, wired devices that are not amenable to continuous use during natural daily activities; these previously reported systems also provide limited mechanisms for real-time user feedback. This study introduces a soft, wireless, skin-conformal technology that gently mounts on the upper chest to capture vibratory responses associated with vocalization in a manner that is immune to ambient noises. Pairing with a separate, wirelessly linked device supports haptic feedback to the user based on quantitative thresholds in vocal usage. A machine learning-based approach enables precise vocal dosimetry from the recorded data, to support personalized, real-time quantitation and feedback. These systems have strong potential to guide healthy behaviors in vocal use.
Subject(s)
Singing , Voice Disorders , Voice , Humans , Feedback , Voice Disorders/etiology , Voice/physiology , Vocal Cords/physiologyABSTRACT
A tunable coupling or acetylation of phenol derivatives with diacetyl was enabled through the switch of the atmosphere and solvent induced by visible light under metal-free conditions. Symmetric and asymmetric diphenols or binaphthols were obtained under oxygen in water or 1,1,1,3,3,3-hexafluoroisopropanol, whereas phenol acetates were formed under argon in the presence of diacetyl and acetic acid. The possibility to control the chemo- and regioselectivities enriches the synthetic versatility of photoreactions.
ABSTRACT
Endotoxin tolerance refers to a state refractory to subsequent lipopolysaccharide (LPS) stimulations following a primary LPS exposure. To study the relationship between endotoxin tolerance and macrophage polarization, endotoxin tolerance was induced by 1 µg/mL LPS from the periodontal pathogen, Porphyromonas gingivalis (P. gingivalis), in peritoneal macrophages (PMs) and bone marrow-derived macrophages (BMDMs). Repeated P. gingivalis LPS challenges increased the quantities of CD206+ PMs, while the number of CD86+CD206+ PMs was reduced compared with the non-tolerant group (p < 0.05). However, there were no changes in BMDMs (p > 0.05). Down regulations of TNF-α, IL-12, nitric oxide and MMP-2 production, and upregulated IL-10, MMP-9 levels and arginase-1 activities occurred in tolerant PMs and BMDMs (p < 0.05). P. gingivalis LPS-tolerant PMs and BMDMs also enhanced scrape-wound healing abilities of 15p-1 cells (p < 0.05). Expressions of phospho-signal transducer and activator of transcription 6 (p-STAT6) and protein tyrosine phosphatase 1B (PTP1B) were increased, while p-MEK1/2 levels were downregulated in tolerant PMs and BMDMs (p < 0.05). IL-10 production in tolerant Stat6 knockdown RAW264.7 cells was lower than tolerant control cells (p < 0.05). P. gingivalis LPS-tolerant macrophages represented an intermediate state between M1/M2 polarization, which functioned as M2-like cells, and led to limited inflammatory responses and enhanced wound healing activities. The PTP1B-MEK1/2-STAT6 signaling pathway might be involved in the polarization of tolerant macrophages.
Subject(s)
Lipopolysaccharides , Porphyromonas gingivalis , Endotoxin Tolerance , Lipopolysaccharides/metabolism , Macrophage Activation , Macrophages/metabolismABSTRACT
Understanding spatial determinants, i.e., social, infrastructural, and environmental features of a place, which shape infectious disease is critically important for public health. We present an exploration of the spatial determinants of reported COVID-19 incidence across India's 641 urban and rural districts, comparing two waves (2020-2021). Three key results emerge using three COVID-19 incidence metrics: cumulative incidence proportion (aggregate risk), cumulative temporal incidence rate, and severity ratio. First, in the same district, characteristics of COVID-19 incidences are similar across waves, with the second wave over four times more severe than the first. Second, after controlling for state-level effects, urbanization (urban population share), living standards, and population age emerge as positive determinants of both risk and rates across waves. Third, keeping all else constant, lower shares of workers working from home correlate with greater infection risk during the second wave. While much attention has focused on intra-urban disease spread, our findings suggest that understanding spatial determinants across human settlements is also important for managing current and future pandemics.
ABSTRACT
The electron multipliers gain is closely related to the secondary electron emission coefficient (SEE) of the emission layer materials. The SEE is closely related to the thickness of the emission layer. If the emission layer is thin, the low SEE causes the low gain of electron multipliers. If the emission layer is thick, the conductive layer can't timely supplement charge to the emission layer, the electronic amplifier gain is low too. The electron multipliers usually choose Al2O3 and MgO film as the emission layer because of the high SEE level. MgO easy deliquescence into Mg(OH)2 Mg2(OH)2CO3 and MgCO3 resulting in the lower SEE level. The SEE level of Al2O3 is lower than MgO, but Al2O3 is stable. We designed a spherical system for testing the SEE level of materials, and proposed to use low-energy secondary electrons instead of low-energy electron beam for neutralization to measuring the SEE level of Al2O3, MgO, MgO/Al2O3, Al2O3/MgO, and precisely control the film thickness by using atomic layer deposition. We propose to compare the SEE under the adjacent incident electrons energy to partition the SEE value of the material, and obtain four empirical formulas for the relationship between SEE and thickness. Since the main materials that cause the decrease in SEE are Mg2(OH)2CO3 and MgCO3, we use the C element atomic concentration measured by XPS to study the deliquescent depth of the material. We propose to use the concept of transition layer for SEE interpretation of multilayer materials. Through experiments and calculations, we put forward a new emission layer for electron multipliers, including 2-3 nm Al2O3 buffer layer, 5-9 nm MgO main-body layer, 1 nm Al2O3 protective layer or 0.3 nm Al2O3 enhancement layer. We prepared this emission layer to microchannel plate (MCP), which significantly improved the gain of MCP. We can also apply this new emission layer to channel electron multiplier and separate electron multiplier.
ABSTRACT
When the resistivity of the AZO conductive layer is within the MCP resistance requirement, the interval of the Zn content is very narrow (70-73%) and difficult to control. Aiming at the characteristics of the AZO conductive layer on the microchannel plate, an algorithm is designed to adjust the ratio of the conductive material ZnO and the high resistance material Al2O3. We put forward the concept of the working resistance of the MCP (i.e., the resistance during the electron avalanche in the microchannel). The working resistance of AZO-ALD-MCP (Al2O3/ZnO atomic layer deposition microchannel plate) was measured for the first time by the MCP resistance test system. In comparison with the conventional MCP, we found that the resistance of AZO-ALD-MCP in working state and non-working state is very different, and as the voltage increases, the working resistance significantly decreases. Therefore, we proposed a set of analytical methods for the conductive layer. We also proposed to adjust the ratio of the conductive material of the ALD-MCP conductive layer to the high-resistance material under the working resistance condition, and successfully prepared high-gain AZO-ALD-MCP. This design opens the way for finding better materials for the conductive layer of ALD-MCP to improve the performance of MCP.
ABSTRACT
Periodontitis is a dental plaque-induced chronic inflammatory disease. Long-term exposure of the host to periodontal pathogens leads to a hyporesponsive state to the following stimulations, which is described as endotoxin tolerance. Neutrophils are the most abundant innate immune cells in the body. To clarify the roles of endotoxin tolerance in periodontitis, inflammatory responses in Porphyromonas gingivalis (P. gingivalis) lipopolysaccharide (LPS)-tolerized neutrophils were explored in this study. Here, apoptosis and respiratory burst in neutrophils upon single or repeated P. gingivalis LPS stimulations were explored by flow cytometry. Cytokine production (TNF-α, IL-8, and IL-10) in tolerized neutrophils or neutrophils co-cultured with peripheral blood mononuclear cells was determined by ELISA. Phagocytosis of P. gingivalis by tolerized neutrophils was also assayed by flow cytometry. In addition, quality and quantitation of neutrophil extracellular trap (NET) formation were detected using immunofluorescence microscope and microplate reader, respectively. The protein expressions of extracellular signal-regulated kinase1/2 (ERK1/2), c-Jun N-terminal kinase (JNK), and p38 mitogen-activated protein kinase (p38 MAPK) were examined to identify possible mechanisms for the abovementioned changes. Tolerance induced by P. gingivalis LPS significantly suppressed apoptosis, reactive oxygen species (ROS) generation, and phagocytosis in neutrophils (p < 0.05). In both neutrophils alone and co-culture system, repeated P. gingivalis LPS stimulations significantly decreased TNF-α production, but increased IL-10 secretion (p < 0.05). Moreover, in tolerized neutrophils, NET formations were strengthened and there were more released extracellular DNA (p < 0.05). In P. gingivalis LPS-tolerized neutrophils, phosphorylation of ERK1/2 was suppressed compared with that in non-tolerized cells. Taken together, immune responses in neutrophils were reprogrammed by P. gingivalis LPS-induced tolerance, which might be related with the development of inflammation in periodontal tissues. Moreover, ERK1/2 might play important roles in endotoxin tolerance triggered by P. gingivalis LPS.
Subject(s)
Endotoxins/toxicity , Immune Tolerance/immunology , Inflammation Mediators/immunology , Lipopolysaccharides/toxicity , Neutrophils/immunology , Porphyromonas gingivalis , Animals , Bacteroidaceae Infections/immunology , Bacteroidaceae Infections/metabolism , Cells, Cultured , Coculture Techniques , Humans , Immune Tolerance/drug effects , Inflammation Mediators/metabolism , Leukocytes, Mononuclear/drug effects , Leukocytes, Mononuclear/immunology , Leukocytes, Mononuclear/metabolism , Neutrophils/drug effects , Neutrophils/metabolism , Phagocytosis/drug effects , Phagocytosis/physiology , SheepABSTRACT
Periodontal biotype is used to describe the morphological characteristics of periodontal tissues and is closely related to periodontal health and prognosis of many dental treatments. This study was undertaken to explore the periodontal biotype distribution in a young Chinese population and to evaluate the accuracy of different methods for gingival thickness (GT) measurement. A total of 372 teeth from 31 periodontally healthy subjects were included. GT was measured simultaneously by probe transparency, transgingival probing and cone-beam computed tomography (CBCT). Some other anatomic parameters, including crown width/crown length ratio, attached gingival width, labial bone thickness and papilla volume were recorded for periodontal biotype classification. As found by probe transparency, the gingivae of 222 teeth (59.68%) were thick, while those of 150 teeth (40.32%) were thin. The mean GT of included subjects was 1.03 ± 0.31 mm as measured by transgingival probing and 1.03 ± 0.24 mm as measured by CBCT. Four groups were identified by cluster analysis. Thick-flap biotype, average-scalloped biotype, average-flap biotype and thin-scalloped biotype comprised 137 teeth (36.83%), 96 teeth (25.81%), 39 teeth (10.48%) and 100 teeth (26.88%), respectively. These results demonstrate that the most common periodontal biotype in this young Chinese population was the thick-flap type with low aesthetic risk.
Subject(s)
Cone-Beam Computed Tomography , Dental Papilla/anatomy & histology , Gingiva/anatomy & histology , Periodontium/anatomy & histology , Adolescent , Adult , China/epidemiology , Dental Papilla/diagnostic imaging , Female , Gingiva/diagnostic imaging , Humans , Male , Maxilla/anatomy & histology , Maxilla/diagnostic imaging , Periodontium/diagnostic imaging , Population , Tooth Crown/anatomy & histology , Tooth Crown/diagnostic imaging , Young AdultABSTRACT
OBJECTIVE: Periodontitis is a microbe-induced chronic inflammatory disease. Previous exposure of the host to bacteria or their virulence factors leads to refractory responses to further stimuli, which is called tolerance. Porphyromonas gingivalis (P. gingivalis) is one of the most important pathogenic microorganisms associated with periodontitis, and is a potent inducer of pro- and anti-inflammatory cytokines. The aim of this study was to explore the roles and possible mechanisms of tolerance induced by P. gingivalis. METHODS: THP-1-derived macrophages were pretreated with 1x108 colony-forming units/ml P. gingivalis ATCC 33277 or 21 clinical isolates from moderate to severe chronic periodontitis patients (24 h), washed (2 h) and treated with P. gingivalis ATCC 33277 or the same clinical isolates again (24 h). Levels of pro-inflammatory cytokines TNF-α and IL-1ß and anti-inflammatory cytokine IL-10 in supernatants were detected by ELISA. Moreover, to identify the possible mechanisms for the changes in cytokine secretion, Toll-like receptor 2 (TLR2) and TLR4 protein expressions were explored in these cells by flow cytometry. RESULTS: After repeated challenge with P. gingivalis ATCC 33277 or clinical isolates, production of TNF-α and IL-1ß in macrophages was decreased significantly compared with that following a single stimulation (p<0.05), while only comparable levels of IL-10 were detected in P. gingivalis ATCC 33277 or clinical isolate-tolerized cells (p>0.05). In addition, there was interstrain variability in the ability to induce IL-1ß and IL-10 production after repeated P. gingivalis stimulation. However, no significant changes in TLR2 or TLR4 were detected in macrophages that were repeatedly treated with P. gingivalis ATCC 33277 or clinical isolates compared with those stimulated with P. gingivalis only once (p>0.05). CONCLUSIONS: Repeated P. gingivalis stimulation triggered tolerance, which might contribute to limiting periodontal inflammation. However, tolerance induced by P. gingivalis might develop independently of TLR2 and TLR4 and be related to molecules in signaling pathways downstream of TLR2 and TLR4.