ABSTRACT
The toxicity and radioactivity of uranium (U)-containing wastewater pose a serious threat to the environment of humans, animals, and plants. It is necessary to remove U from contaminated wastewater. With high adsorption capacity and fast adsorption rate, a composite CNT-P/HAP, which comprises carbon nanotubes (CNT) modified with polyethyleneimine (PEI), was functionalized further by hydroxyapatite (HAP) using the hydrothermal method. Adsorption experiments indicated that the optimal performance for CNT-P/HAP was 1330.64 mg g-1 of adsorption capacity and 40 min of adsorption equilibrium at a pH of 3. In addition, the adsorption capacity of CNT-P/HAP was over 2 times that of HAP at a pH of 7. The synergistic effect in both synthesis and adsorption gave CNT-P/HAP an excellent adsorption capacity for U. The XRD and FT-IR analysis indicated that the adsorption mechanism of CNT-P/HAP for U is decided by the pH of the solution. CNT-P/HAP could be used in multiple conditions to remediate U-containing wastewater.
ABSTRACT
The relationship model between the droplet lifetime and interface properties is established to characterize the stability of oil droplets, and then, the influence of the alkali-surfactant-polymer (ASP) concentration on the lifetime is analyzed by theoretical calculations. The stability dynamic characteristics of oil-in-water (O/W) emulsions from ASP flooding were evaluated using the emulsion stability model (Civan model) based on two-phase separation. The effect of ASP on dynamic characteristics of the emulsion was explored by analyzing film strength qualitatively and measuring interfacial tension and ζ potential. The results showed that the Civan model was suitable to evaluate the stability of the O/W emulsion and to obtain the corresponding dynamic characteristics. The O/W emulsions became more stable with the increasing alkali concentration first at a low alkali concentration (c NaOH < 200 mg/L) and then became less stable with the increasing alkali concentration at a high alkali concentration (c NaOH > 200 mg/L). The stabilities of O/W emulsions were improved with the increasing concentrations of the surfactant and polymer. The mechanism of stabilization of the O/W emulsion by ASP is as follows. The surface-active substances formed by the reaction of alkali and acidic substances in the oil phase, together with surfactants, adsorb at the oil-water interface, reducing the interfacial tension and increasing the strength of the oil-water interface film. The polymer only increases the strength of the interface film by increasing the viscoelasticity of the oil-water interface film.