ABSTRACT
Intertidal algae may adapt to environmental challenges by acquiring genes from other organisms and relying on symbiotic microorganisms. Here, we obtained a symbiont-free and chromosome-level genome of Pyropia haitanensis (47.2 Mb), a type of intertidal algae, by using multiple symbiont screening methods. We identified 286 horizontal gene transfer (HGT) genes, 251 of which harbored transposable elements (TEs), reflecting the importance of TEs for facilitating the transfer of genes into P. haitanensis. Notably, the bulked segregant analysis revealed that two HGT genes, sirohydrochlorin ferrochelatase and peptide-methionine (R)-S-oxide reductase, play a significant role in the adaptation of P. haitanensis to heat stress. Besides, we found Pseudomonas, Actinobacteria, and Bacteroidetes are the major taxa among the symbiotic bacteria of P. haitanensis (nearly 50% of the HGT gene donors). Among of them, a heat-tolerant actinobacterial strain (Saccharothrix sp.) was isolated and revealed to be associated with the heat tolerance of P. haitanensis through its regulatory effects on the genes involved in proline synthesis (proC), redox homeostasis (ggt), and protein folding (HSP20). These findings contribute to our understanding of the adaptive evolution of intertidal algae, expanding our knowledge of the HGT genes and symbiotic microorganisms to enhance their resilience and survival in challenging intertidal environments.
Subject(s)
Gene Transfer, Horizontal , Porphyra , Symbiosis , Symbiosis/genetics , Porphyra/microbiology , Porphyra/genetics , Adaptation, Physiological/genetics , Phylogeny , Biological EvolutionABSTRACT
The clinical demand for occlusal reconstruction increases rapidly with increasing number of patients who have lost their normal occlusion because of tooth wear and dentition defects. Occlusal reconstruction is a special type of restoration defined as a comprehensive restoration of the function of the stomatognathic system by reestablishing a uniform and stable occlusal relationship between the upper and lower dentitions. Occlusal function analysis is an important part of occlusal reconstruction to achieve accurate restoration design and adjustment. Digital occlusal function analysis was conducted to monitor the movement of the mandible and obtain related data for the parameter design of occlusal reconstruction. Preoperative design, intraoperative adjustment, and postoperative verification were achieved, thereby improving the efficiency and accuracy of occlusal reconstruction.
Subject(s)
Dental Occlusion , Humans , MandibleABSTRACT
Janus-micromotors, as efficient self-propelled materials, have garnered considerable attention for their potential applications in non-agitated liquids. However, the design of micromotors is still challenging and with limited approaches, especially concerning speed and mobility in complex environments. Herein, a two-step spray-drying approach encompassing symmetrical assembly and asymmetrical assembly is introduced to fabricate the metal-organic framework (MOF) Janus-micromotors with hierarchical pores. Using a spray-dryer, a symmetrical assembly is first employed to prepare macro-meso-microporous UiO-66 with intrinsic micropores (<0.5 nm) alongside mesopores (≈24 nm) and macropores (≈400 nm). Subsequent asymmetrical assembly yielded the UiO-66-Janus loaded with the reducible nanoparticles, which underwent oxidation by KMnO4 to form MnO2 micromotors. The micromotors efficiently generated O2 for self-propulsion in H2O2, exhibiting ultrahigh speeds (1135 µm s-1, in a 5% H2O2 solution) and unique anti-gravity diffusion effects. In a specially designed simulated sand-water system, the micromotors traversed from the lower water to the upper water through the sand layer. In particular, the as-prepared micromotors demonstrated optimal efficiency in pollutant removal, with an adsorption kinetic coefficient exceeding five times that of the micromotors only possessing micropores and mesopores. This novel strategy fabricating Janus-micromotors shows great potential for efficient treatment in complex environments.
ABSTRACT
This paper presents the design and the non-linearity optimization of a new vertical non-contact angle sensor based on the electromagnetic induction principle. The proposed sensor consists of a stator part (with one solenoidal excitation coil and three sinusoidal receiver coils) and a rotor part (with six rectangular metal sheets). The receiver coil was designed based on the differential principle, which eliminates the effect of the excitation coil on the induced voltage of the receiver coil, and essentially decouples the excitation field from the eddy current field. Moreover, the induced voltages in the three receiver coils are three-phase sinusoidal signals with a phase difference of 10°, which are linearized by CLARK transformation. To minimize the sensor non-linearity, the Plackett-Burman technique was used, which identified the stator radius and the rotor blade thickness as the key factors affecting the sensor linearity. Then, the particle swarm algorithm with decreasing inertia weights was utilized to optimize the sensor linearity. A sensor prototype was made and tested in the laboratory, where the experimental results showed that the sensor non-linearity was only 0.648% and 0.645% in the clockwise and counterclockwise directions, respectively. Notably, the non-linearity of the sensor was less than -0.696% at different speeds.
ABSTRACT
Capture and immobilization of 137Cs is urgent for radioactive contamination remediation and spent fuel treatment. Herein, an effective all-in-one treatment method to simultaneously adsorb and immobilize Cs+ without high-temperature treatment is proposed. According to the strategy of incorporating high-valency metal ions into molybdates to increase the material stability and affinity towards radionuclides, layered HMMoO6·nH2O (M = Ta (1), Nb (2)) are prepared. Both materials exhibit excellent acid resistance (even 15 mol/L HNO3). They maintain remarkable adsorption capacity for Cs+ in 1 mol/L HNO3 solutions and can selectively capture Cs+ under excessive competitive ions. Furthermore, they show successful cleanup for actual 137Cs-liquid-wastes generated during industrial production. In particular, adsorbed Cs+ can be firmly immobilized in interlayer spaces of materials due to the highly stable anionic framework. The removal mechanism is attributed to ion exchange between Cs+ and interlayer H+ by multiple characterizations. Study of the structure-function relationship shows that the occurrence of Cs+ ion exchange is closely related to plate-like layered structure. This work develops an efficient all-in-one treatment method for capturing and immobilizing radiocesium by ultra-stable inorganic solid acid materials with low energy consumption and high safety for radionuclide remediation.
ABSTRACT
Microplastics (MPs) are widely distributed in soil environments, but their ecological risks are not fully understood. To fill this knowledge gap, incubation experiments were conducted to explore the physiological response of Eisenia foetida (E. fetida) to polyethylene MP stress and its effects on soil physicochemical properties. E. fetida was incubated in soils amended with MPs of two particle sizes (13 µm and 130 µm) at six concentrations (0, 1, 3, 6, 10 and 20 g MPs·kg-1 soil) under laboratory conditions. The toxicity of 13 µm MPs on the growth and survival of E. fetida was greater than that of 130 µm MPs. Excessive reactive oxygen species accumulation induced by high MP concentrations decreased superoxide dismutase activity and increased malondialdehyde content. Soil pH increased significantly in the 130 µm treatments. MPs increased the contents of soil organic carbon and available potassium. However, the presence of MPs did not significantly alter available phosphorus or nitrate nitrogen content. MP contamination in soil may have adverse impacts on the growth of earthworms, induce oxidative stress in earthworms, and change soil physicochemical properties. In addition, the effects of MPs are size-dependent and dose-dependent. This study provides new evidence for the ecological risks of MP pollution in the earthworm-soil systems.
Subject(s)
Oligochaeta , Soil Pollutants , Animals , Microplastics/toxicity , Polyethylene/toxicity , Plastics/toxicity , Soil/chemistry , Carbon/pharmacology , Soil Pollutants/analysisABSTRACT
Applying biochar to soil has been recognized as a promising practice of climate-smart agriculture, with considerable potential in enhancing soil organic carbon (SOC) sequestration. Previous studies showed that biochar-induced increases in SOC stock varied substantially among experiments, while the explanatory factors responsible for such variability are still not well assessed. Here, we conducted an integrative meta-analysis of the magnitude and efficiency of biochar-induced change in SOC stock, using a database including 476 field measurements at 101 sites across the globe. Biochar amendment increased SOC stock by 6.13 ± 1.62 (95% confidence interval, CI) and 7.01 ± 1.11 (95% CI) Mg C ha-1, respectively, compared to their unfertilized (R0) and mineral nitrogen (N) fertilized (Rn) references. Of which approx. 52% (R0) and 50% (Rn) were contributed directly by biochar-C input. Corresponding biochar carbon efficiencies in R0 and Rn datasets were estimated as 58.20 ± 10.37% and 65.58 ± 9.26% (95% CI), respectively. The change magnitude of SOC stock increased significantly (p < 0.01) with the increasing amount of biochar-C input, while carbon efficiency of biochar showed an opposite trend. Biochar amendment sequestered larger amounts of SOC with higher efficiency in acidic and loamy soils than in alkaline and sandy soils. Biochar amendments with higher C/N ratio caused higher SOC increase than those with lower C/N ratio. Random forest (RF) algorithm showed that accumulative biochar-C input, soil pH, and biochar C/N ratio were the three most-important factors regulating the SOC stock responses. Overall, these results suggest that applying high C/N ratio biochar in acidic soils is a recommendable agricultural practice from the perspective of enhancing organic carbon.
Subject(s)
Carbon , Soil , Charcoal , Agriculture/methods , Carbon SequestrationABSTRACT
This study intends to enhance the mechanical strength of wood-plastic composite selective laser sintering (SLS) parts by using a sustainable composite, peanut husk powder (PHP)/poly ether sulfone (PES) (PHPC). The study aims to address agricultural waste pollution by encouraging the eco-friendly utilization of such waste in SLS technology. To ensure the sintering quality and mechanical properties and prevent deformation and warping during sintering, the thermo-physical properties of PHP and PES powders were analyzed to determine a suitable preheating temperature for PHPC. Single-layer sintering tests were conducted to assess the formability of PHPC specimens with varying PHP particle sizes. The study showed the effects of different PHP particle sizes on the mechanical performance of PHPC parts. The evaluation covered various aspects of PHPC SLS parts, including mechanical strength, density, residual ash content, dimensional accuracy (DA), and surface roughness, with different PHP particle sizes. The mechanical analysis showed that PHPC parts made from PHP particles of ≤0.125 mm were the strongest. Specifically, the density bending strength, residual ash content, tensile, and impact strength were measured as 1.1825 g/cm3, 14.1 MPa, 1.2%, 6.076 MPa, and 2.12 kJ/cm2, respectively. Notably, these parameters showed significant improvement after the wax infiltration treatment. SEM was used to examine the PHP and PES powder particles, PHPC specimen microstructure, and PHPC SLS parts before and after the mechanical tests and waxing. Consequently, SEM analysis wholly confirmed the mechanical test results.
ABSTRACT
BACKGROUND: To determine the efficacy of adjuvant radiotherapy for stage II-III biliary tract carcinoma. METHODS: We retrospectively analyzed the data of 37 patients who underwent radical resection of biliary tract carcinomas at the Affiliated Hospital of Inner Mongolia Medical University between 2016 and 2020. We analyzed survival differences between patients who did (n = 17) and did not (n = 20) receive postoperative adjuvant radiotherapy by using Kaplan-Meier analysis. The log-rank test and Cox univariate analysis were used. The Cox proportional risk regression model was used for the multifactorial analysis of factors influencing prognosis. RESULTS: The median survival time (28.9 vs. 14.5 months) and the 1-year (82.40% vs. 55.0%) and 2-year survival rates (58.8% vs. 25.0%) were significantly higher among patients who received adjuvant radiotherapy than among those who did not (χ2 = 6.381, p = 0.012). Multifactorial analysis showed that pathological tumor type (p = 0.004), disease stage (p = 0.021), and adjuvant radiotherapy (p = 0.001) were independent prognostic factors in biliary tract carcinoma. Subgroup analyses showed that compared to no radiotherapy, adjuvant radiotherapy significantly improved median survival time in patients with stage III disease (21.6 vs. 12.7 months; p = 0.017), positive margins (28.9 vs. 10.5 months; p = 0.012), and T3 or T4 tumors (26.8 vs. 16.8 months; p = 0.037). CONCLUSION: Adjuvant radiotherapy significantly improved the survival of patients with biliary tract carcinoma, and is recommended especially for patients with stage III disease, positive surgical margins, or ≥ T3.
Subject(s)
Biliary Tract , Carcinoma , Gastrointestinal Neoplasms , Humans , Radiotherapy, Adjuvant/adverse effects , Retrospective Studies , Prognosis , Neoplasm StagingABSTRACT
BACKGROUND: Genomic imprinting refers to a subset of genes that are expressed from only one parental allele during seed development in plants. Studies on genomic imprinting have revealed that intraspecific variations in genomic imprinting expression exist in naturally genetic varieties. However, there have been few studies on the functional analysis of allele-specific imprinted genes. RESULTS: Here, we generated three reciprocal crosses among the B73, Mo17 and CAU5 inbred lines. Based on the transcriptome-wide analysis of allele-specific expression using RNA sequencing technology, 305 allele-specific imprinting genes (ASIGs) were identified in embryos, and 655 ASIGs were identified in endosperms from three maize F1 hybrids. Of these ASIGs, most did not show consistent maternal or paternal bias between the same tissue from different hybrids or different tissues from one hybrid cross. By gene ontology (GO) analysis, five and eight categories of GO exhibited significantly higher functional enrichments for ASIGs identified in embryo and endosperm, respectively. These functional categories indicated that ASIGs are involved in intercellular nutrient transport, signaling pathways, and transcriptional regulation of kernel development. Finally, the mutation and overexpression of one ASIG (Zm305) affected the length and width of the kernel. CONCLUSION: In this study, our data will be helpful in gaining further knowledge of genes exhibiting allele-specific imprinting patterns in seeds. The gain- and loss-of-function phenotypes of ASIGs associated with agronomically important seed traits provide compelling evidence for ASIGs as crucial targets to optimize seed traits in crop plants.
Subject(s)
Endosperm , Transcriptome , Endosperm/metabolism , Alleles , Zea mays/metabolism , Seeds/genetics , Genomic Imprinting , Gene Expression Regulation, PlantABSTRACT
In this paper, a facile and ultrafast two-step dipping process was developed to in situ form an electrocatalyst on a NiMo foam substrate without consuming extra energy. The obtained electrode showed a porous coral-like structure decorated with nanosheets and exhibited excellent overall water splitting properties in alkaline solution. This study provides a feasible strategy for developing an environmentally friendly and energy-efficient non-noble metal electrode for hydrogen production from water splitting.
ABSTRACT
In the laser sintering (LS) printing process, a printed part is formed by sintering layer-by-layer on the powder bed. Thus, it is necessary to consider the dimensional accuracy of the laser-sintered powder bed as an important evaluation index. In this paper, a generalized powder bed-size accuracy compensation model is proposed for non-crystalline thermoplastic polymer materials. Taking polyethersulfone (PES) material as an example, the main factors influencing powder bed dimensional accuracy during LS printing are modeled and analyzed experimentally in this study, including four important factors: laser reference deviation, temperature deviation, density deviation, and secondary sintering deviation. In this study, CX_A200 LS equipment is used for prototyping and verification, a 3D scanning method is used to measure the printed parts, and the measurement results are digitally compared and analyzed. On this basis, the relationship of each influencing factor in the proposed compensation model is determined experimentally, and the experimental results demonstrate that the proposed compensation model is approximately 95% effective in terms of correcting the deviation of powder bed dimensional accuracy.
ABSTRACT
The current available selective laser sintering (SLS) materials are often high in cost and limited in variety; the mechanical properties of wood-composite SLS parts are low quality, which restricts the development of SLS technology. This article aims to optimize the SLS processing parameters to enhance the mechanical properties of the Prosopis chilensis powder (PCP)/polyethersulfone (PES) composite (PCPC) part fabricated via SLS. The PCP and PES powder were proposed as the feedstock of the PCPC powder bed for SLS. First, the thermal decomposition and glass transition temperatures (Tg) of PCP and PES powder were estimated to reduce the produced PCPC parts from warping and deformation during SLS. An orthogonal experimental methodology with five factors and four levels was used to optimize the SLS parameters for the PCPC SLS test. The scanning speed, preheating temperature, and laser power are selected as the main affecting factors on this study. The influence of these factors on dimension accuracies, bending and tensile strengths, and surface roughness quality of the produced PCPC parts was studied. The PCPC particle distribution and microstructure were inspected via scanning electron microscopy. Furthermore, the synthesis weighted scoring methods were utilized to determine the optimal SLS processing parameters of the produced PCPC parts. The combined results of tests showed that the optimal SLS parameters were as follows: the scanning speed is 1.8 m/s, preheating temperature is 80°C, and the laser power is 12 W. Thus, the quality of PCPC SLS parts was significantly enhanced when the optimal parameters were utilized in the SLS process. This article provided the main reference values of SLS parameters of the PCPC. To further enhance the surface roughness quality and mechanical strengths, the postprocessing infiltration with wax was introduced; after wax infiltration, the surface roughness and mechanical strengths were significantly improved.
ABSTRACT
Dalbergia hancai Benth. (D. hancai) is one of the most frequently utilized traditional Chinese medicine in Zhuang medicine. Simultaneously, it has been included in the "Quality Standard of Zhuang medicine in Guangxi Zhuang Autonomous Region (Vol. 2)" and possessed outstanding pharmacological effects. However, the pharmacodynamic material basis of D. hancai still remains unclear. In this study, the high-performance liquid chromatography (HPLC) method had been employed to establish the fingerprint of 10 batches of aqueous extract of D. hancai originated from different parts of China. At the same time, similarity evaluation, cluster analysis, and principal component analysis (PCA) had also been conducted to evaluate the common peaks. The acetic acid-induced writhing in mice had been employed as an analgesic model, and the carrageenan-induced toe swelling in mice was utilized as an anti-inflammatory model for pharmacodynamic experiments. The gray relational analysis (GRA) and partial least squares regression (PLSR) were applied to correlate the fingerprint and pharmacodynamic data to thoroughly examine its spectrum-effect relationship, whereby its analgesic and anti-inflammatory material basis had been comprehensively explored. The results revealed that the HPLC fingerprint of the aqueous extract of D. hancai had successfully identified 12 common peaks whereby two of which were further identified as protocatechuic acid and vitexin. Subsequently, through the analysis of GRA and PLSR, the chromatographic peaks that possess a critical correlation degree with the analgesic and anti-inflammatory effects of D. hancai had also been successfully discovered. Ultimately, the analgesic and anti-inflammatory effects of the 10 batches of D. hancai aqueous extract had been conclusively proved, and it was evidently indicated that these effects were attributable to the synergistic interactions between various components. Therefore, this study aims to serve as an effective analytical method for screening and predicting the effective substances of traditional Chinese medicine on the basis of the spectrum-effect relationship.
ABSTRACT
Background: Stereotactic body radiotherapy (SBRT) has proven to provide high rates of tumor control for patients with early-stage non-small cell lung cancer (NSCLC). We are reporting a multicenter experience of long-term clinical outcomes and adverse effect profiles of patients with medically inoperable early-stage NSCLC treated with SBRT. Methods: A total of 145 early-stage NSCLC patients underwent SBRT at the Cancer Hospital of the University of Chinese Academy of Sciences (Zhejiang Cancer Hospital), Shandong Cancer Hospital and Institute, and Shanghai Pulmonary Hospital between October 2012 and March 2019. Four-dimensional computed tomography (4D-CT) simulation was used for all patients. All received a biologically effective dose (BED; α/ß=10) of 96-120 Gy with the prescribed isodose line covering >95% of the planning target volume (PTV). Survival was analyzed by the Kaplan-Meier method. Survival was estimated using the Kaplan-Meier method. Results: The median tumor diameter was 2.2 (range, 0.5-5.2) cm. The median follow-up was of 65.6 months. Thirty-five patients (24.1%) developed disease recurrence. The rates of local, regional, and distant disease recurrence were, respectively, 5.1%, 7.4%, and 13.2% at 3 years; and 9.6%, 9.8%, and 15.8% at 5 years. Progression-free survival (PFS) rates at 3 and 5 years were 69.2% and 60.5% respectively; the overall survival (OS) rates were 78.1% and 70.1%, respectively. Five patients (3.4%) experienced grade 3 treatment-related adverse events (AEs). No patient experienced grade 4 or 5 toxicity. Conclusions: From our retrospective analysis with long-term follow-up in Chinese population, SBRT achieved high rate of local control (LC) and low toxicity in patients with early-stage NSCLC. This study offered robust long-term outcome data of SBRT in the Chinese population, which was very rarely reported in China before.
ABSTRACT
When using selective laser sintering to print parts with thin-walled structures, the thermal action of the laser can cause thermal stresses that lead to plastic deformation, resulting in large warpage and dimensional deviations. To address this issue, this study proposes a bottom support method for selective laser sintering. The impact of lattice-type, concentric-type, and cross-type support structures with varying filling densities and thicknesses on the suppression of warpage and dimensional errors was investigated. The optimal process parameters for each support structure were then determined through optimization. The findings of this study demonstrated a reduction in Z-axis dimensional errors of the workpiece following the addition of supports. The reduction amounted to 33.809%, 86.160%, and 66.214%, respectively, compared to the original workpiece. Moreover, the corresponding warpage was reduced by 35.673%, 46.189%, and 46.059% for each respective case, showcasing an improvement in the printing precision. Therefore, the bottom support effectively reduces dimensional and shape errors in thin-walled parts printed by selective laser sintering. Specifically, the results obtained indicated that the concentric type of support is more effective in reducing dimensional errors and enhancing the shape accuracy of the printed workpiece. Conversely, the cross type of support demonstrated superior capabilities in minimizing the consumption of printing materials while still delivering satisfactory results. Thus, this study holds promise for contributing to the advancement of thin-walled part quality using selective laser sintering technology. This research can contribute to achieving greater accuracy in the fabrication of parts through 3D printing.
ABSTRACT
Powder laying is a necessary procedure during powder bed additive manufacturing (PBAM), and the quality of powder bed has an important effect on the performance of products. Because the powder particle motion state during the powder laying process of biomass composites is difficult to observe, and the influence of the powder laying process parameters on the quality of the powder bed is still unclear, a simulation study of the biomass composite powder laying process during powder bed additive manufacturing was conducted using the discrete element method. A discrete element model of walnut shell/Co-PES composite powder was established using the multi-sphere unit method, and the powder-spreading process was numerically simulated using two different powder spreading methods (rollers/scrapers). The results showed that the quality of powder bed formed by roller laying was better than that formed by scrapers with the same powder laying speed and powder laying thickness. For both of the two different spreading methods, the uniformity and density of the powder bed decreased as spreading speed increased, although the spreading speed had a more important influence on scraper spreading compared to roller spreading. As powder laying thickness increased, the powder bed formed by the two different powder laying methods became more uniform and denser. When the powder laying thickness was less than 110µm, the particles were easily blocked at the powder laying gap and are pushed out of the forming platform, forming many voids, and decreasing the powder bed's quality. When the powder thickness was greater than 140 µm, the uniformity and density of the powder bed increased gradually, the number of voids decreased, and the quality of the powder bed improved.
ABSTRACT
Currently, the fabrication of low cost and high efficiency electrocatalysts is a hotspot in the study of water splitting. Herein, plasma spray (PS) was used to induce a microcosmic explosion (me) on Ni mesh to modify the nanoscale Ni for the preparation of me-PS-NM electrodes with excellent hydrogen evolution. We also demonstrated that oxygen evolution could be significantly enhanced after the me-PS-NM electrodes were doped with Fe3+. Both electrodes formed a system exhibiting superior activity and stability for overall water splitting without noble metals.
ABSTRACT
Background: Data on Canadian pharmacists' knowledge and perceptions about frailty in older adults and its assessment in pharmacy practice are scarce. Methods: A cross-sectional survey of 349 Canadian pharmacists was conducted to evaluate pharmacists' knowledge, perceptions and practices regarding frailty. Descriptive analyses summarized responses by practice setting, and a multivariable logistic regression model examined associations between respondent characteristics and the likelihood of assessing frailty. Results: Most respondents were female (70%), aged ≤34 years (47%), Canadian graduates (83%), from Ontario/Quebec (51%) and from urban centres (58%). Although a significant proportion agreed it is important for pharmacists to know (80%) and assess (56%) patient frailty status, only 36% reported assessing frailty in practice. Respondents exclusively practising in a community pharmacy were significantly less likely to agree that it is important for a pharmacist to know or assess frailty status and to report assessing it. Factors associated with a greater likelihood of assessment included positive beliefs about the importance of knowing a patient's frailty status and having a greater proportion of older patients with cognitive or functional impairment in practice. Discussion: Findings suggest that pharmacists generally agree with the importance of understanding frailty as it relates to the appropriate use of medications, but most do not assess it. Further research is needed to identify the barriers to assessing frailty, while guidance is needed on which of the available screening tools can best be integrated into a clinical pharmacy practice. Conclusion: There is an opportunity to improve pharmaceutical care for older adults by providing pharmacists the means and resources to assess frailty in practice.
ABSTRACT
Bismuth-halide-based inorganic-organic hybrid materials (Bi-IOHMs) are desirable in luminescence-related applications due to their advantages such as low toxicity and chemical stability. Herein, two Bi-IOHMs of [Bpy][BiCl4(Phen)] (1, Bpy = N-butylpyridinium, Phen = 1,10-phenanthroline) and [PP14][BiCl4(Phen)]·0.25H2O (2, PP14 = N-butyl-N-methylpiperidinium), containing different ionic liquid cations and same anionic units, have been synthesized and characterized. Single-crystal X-ray diffraction reveals that compounds 1 and 2 crystallize in the monoclinic space group of P21/c and P21, respectively. They both possess zero-dimensional ionic structures and exhibit phosphorescence at room temperature upon excitation of UV light (375 nm for 1, 390 nm for 2), with microsecond lifetime (24.13 µs for 1 and 95.37 µs for 2). Hirshfeld surface analysis has been utilized to visually exhibit the different packing motifs and intermolecular interactions in 1 and 2. The variation in ionic liquids makes compound 2 have a more rigid supramolecular structure than 1, resulting in a significant enhancement in photoluminescence quantum yield (PLQY), that is, 0.68% for 1 and 33.24% for 2. In addition, the ratio of the emission intensities for compounds 1 and 2 shows a correlation with temperature. This work provides new insight into luminescence enhancement and temperature sensing applications involving Bi-IOHMs.