Ionic liquids in capillary electrophoresis analysis of proteins and carbohydrates.

Ionic liquids (ILs), as non-molecular type solvents, possess excellent physical-chemical properties, which make them useful in important separation applications in gas chromatography, liquid chromatography, and capillary electrophoresis. Among a plethora of potential uses of ionic liquids in separation science, capillary electrophoresis can utilize its resolution-enhancing effect in the analysis of proteins and carbohydrates, via the formation of intermolecular interactions, e.g., hydrophobic, hydrogen bonding, or electrostatic. ILs and polymeric ionic liquids (PIL) also represent an excellent choice as background electrolyte (BGE) additives for capillary coatings in CE, which is especially important in protein analysis. Another interesting utilization of ILs is the fabrication of monoliths for capillary electrochromatography in which instance the mechanism of retention is based on ion exclusion interactions. Carbohydrates can also be readily analyzed by CE with the help of ionic liquids without the need for an extra derivatization step. One of the future perspectives on the use of ILs is their utilization in the recently emerging biopharmaceutical industry exploiting the increased resolution of proteins and carbohydrates, two of the important components of glycoprotein therapeutics. In this paper, we address the so-far not-reviewed ionic liquid-mediated analysis of proteins and carbohydrates by capillary electrophoresis-based techniques also addressing their impact on the separation mechanism.

N-glycan Analysis in Molecular Medicine: Innovator and Biosimilar Protein Therapeutics.

The market segment of new biological drugs (monoclonal antibodies, fusion proteins, antibody-drug conjugates, and new modality protein therapeutics) is rapidly growing, especially after the patent expiration of the original biologics, initiating the emergence of biosimilars. N-glycosylation of therapeutic proteins has high importance on their stability, safety, immunogenicity, efficacy, and serum half-life. Therefore, Nglycosylation is considered to be one of the critical quality attributes. Consequently, it should be rigorously monitored during the development, manufacturing, and release of glycoprotein biologicals. In this review, first, the regulatory considerations for biosimilars are shortly summarized, followed by conferring the analytical techniques needed for monitoring and characterization of the N-glycosylation of biological drugs. Particular respect is paid to liquid phase separation techniques with high sensitivity and highresolution detection methods, including laser-induced fluorescence and mass spectrometry.

Recent Advances in the Analysis Full/Empty Capsid Ratio and Genome Integrity of Adeno-associated Virus (AAV) Gene Delivery Vectors.

Adeno-associated virus (AAV) is one of the most promising viral gene delivery vectors with long-term gene expression and disease correction, featuring high efficiency and excellent safety in human clinical trials. During the production of AAV vectors, there are several quality control (QC) parameters that should be rigorously monitored to comply with clinical safety and efficacy. This review gives a short summary of the most frequently used AVV production and purification methods, focusing on the analytical techniques applied to determine the full/empty capsid ratio and the integrity of the encapsidated therapeutic DNA of the products.

[The potential role of proteomic and glycomic biomarkers in chronic obstructive pulmonary disease diagnostics]. / Protein és glikán biomarkerek szerepe a krónikus obstruktív tüdobetegség diagnosztikájában.

Chronic obstructive pulmonary disease (COPD) is worldwide a significant representative of morbidity and mortality statistics. COPD is a preventable and treatable disease and smoking is the main risk factor of disease development. Prevention is crucial, but it has its limitations, so risk estimation and early non-invasive diagnostics are essential to decrease COPD mortality. Although diagnostic techniques are evolving, the perfect screening tool is lacking. Discovery of properly sensitive and specific biomarkers is important. They could be effective diagnostic, differential diagnostic, phenotyping and prognostic tools to clinicians. The manuscript is focusing on recently discovered potential protein and glycan biomarkers for COPD. Orv Hetil. 2020; 161(4): 123-128.

Proteomic and Glycomic Markers to Differentiate Lung Adenocarcinoma from COPD.

Lung adenocarcinoma is one of the leading causes of mortality among cancer patients worldwide and Chronic Obstructive Pulmonary Disease (COPD) is also high in death statistics. In addition, patients with Chronic Obstructive Pulmonary Disease (COPD) have a high risk of developing primary lung cancer. Prevention, risk estimation and a non-invasive diagnostics are essential to decrease COPD and lung cancer mortality. Therefore, better and more accurate molecular diagnostic markers (biomarkers) are needed for the early differential diagnosis of these lung diseases to help clinicians make better therapeutic decisions. This review focuses on recently discovered adenocarcinoma and COPD biomarkers at the proteome and glycome level. In the first part, the protein markers are summarized, while the second part is focused on glycan markers. Their use to differentiate between chronic inflammation (COPD) and malignant (adenocarcinoma) diseases is discussed in detail.

Analysis of the oligosaccharide composition in wort samples by capillary electrophoresis with laser induced fluorescence detection.

Determination of the oligosaccharide composition in different wort samples is important to monitor their change during the brewing process with different yeast types. In our work, the concentration of fermentable and non-fermentable sugars were monitored by capillary electrophoresis to observe the effect of two different types of yeasts, Saccharomyces pastorianus and Saccharomycodes ludwigii. The former first ferments the monosaccharides, then the higher sugar oligomers, such as maltose and maltotriose, to ethanol, while the latter fully ferments the monosaccharides, but ferments only very low percentages of the oligosaccharides. Therefore, breweries use Saccharomycodes ludwigii to produce beers with low alcohol content. The CE-LIF traces of the wort samples represented unique oligosaccharide signatures.

Glycosimilarity assessment of biotherapeutics 1: Quantitative comparison of the N-glycosylation of the innovator and a biosimilar version of etanercept.

The carbohydrate moieties on the polypeptide chains in most glycoprotein based biotherapeutics and their biosimilars play essential roles in such major mechanisms of actions as antibody-dependent cell-mediated cytotoxicity, complement-dependent cytotoxicity, anti-inflammatory functions and serum clearance. In addition, alteration in glycosylation may influence the safety and efficacy of the product. Glycosylation, therefore, is considered as one of the important critical quality attributes of glycoprotein biotherapeutics, and consequently for their biosimilar counterparts. Thus, the carbohydrate moieties of such biopharmaceuticals (both innovator and biosimilar products) should be closely scrutinized during all stages of the manufacturing process. In this paper we introduce a rapid, capillary gel electrophoresis based process to quantitatively assess the glycosylation aspect of biosimilarity (referred to as glycosimilarity) between the innovator and a biosimilar version of etanercept (Enbrel® and Benepali®, respectively), based on their N-linked carbohydrate profiles. Differences in sialylated, core fucosylated, galactosylated and high mannose glycans were all quantified. Since the mechanism of action of etanercept is TNFα binding, only mannosylation was deemed as critical quality attribute for glycosimilarity assessment due to its influence on serum half-life.

On the glycosylation aspects of biosimilarity.

The recent expiration of several protein therapeutics opened the door for biosimilar development. Biosimilars are biologic medical products that are similar but not identical copies of already-authorized protein therapeutics. Critical quality attributes (CQA), such as post-translational modifications of recombinant biotherapeutics, are important for the clinical efficacy and safety of both the innovative biologics and their biosimilar counterparts. Here, we summarize biosimilarity CQAs, considering the regulatory guidelines and the statistical aspects (e.g., biosimilarity index) and then discuss glycosylation as one of the important attributes of biosimilarity. Finally, we introduced the 'Glycosimilarity Index', which is based on the averaged biosimilarity criterion.

Tilted pillar array fabrication by the combination of proton beam writing and soft lithography for microfluidic cell capture Part 2: Image sequence analysis based evaluation and biological application.

As a continuation of our previously published work, this paper presents a detailed evaluation of a microfabricated cell capture device utilizing a doubly tilted micropillar array. The device was fabricated using a novel hybrid technology based on the combination of proton beam writing and conventional lithography techniques. Tilted pillars offer unique flow characteristics and support enhanced fluidic interaction for improved immunoaffinity based cell capture. The performance of the microdevice was evaluated by an image sequence analysis based in-house developed single-cell tracking system. Individual cell tracking allowed in-depth analysis of the cell-chip surface interaction mechanism from hydrodynamic point of view. Simulation results were validated by using the hybrid device and the optimized surface functionalization procedure. Finally, the cell capture capability of this new generation microdevice was demonstrated by efficiently arresting cells from a HT29 cell-line suspension.

A fully automated linear polyacrylamide coating and regeneration method for capillary electrophoresis of proteins.

Surface modification of the inner capillary wall in CE of proteins is frequently required to alter EOF and to prevent protein adsorption. Manual protocols for such coating techniques are cumbersome. In this paper, an automated covalent linear polyacrylamide coating and regeneration process is described to support long-term stability of fused-silica capillaries for protein analysis. The stability of the resulting capillary coatings was evaluated by a large number of separations using a three-protein test mixture in pH 6 and 3 buffer systems. The results were compared to that obtained with the use of bare fused-silica capillaries. If necessary, the fully automated capillary coating process was easily applied to regenerate the capillary to extend its useful life-time.

Liquid phase separation methods for N-glycosylation analysis of glycoproteins of biomedical and biopharmaceutical interest. A critical review.

Comprehensive carbohydrate analysis of glycoproteins from human biological samples and biotherapeutics are important from diagnostic and therapeutic points of view. This review summarizes the current state-of-the-art liquid phase separation techniques used in N-glycosylation analysis. The different liquid chromatographic techniques and capillary electrophoresis methods are critically discussed in detail. Miniaturization of these methods is also important to increase throughput and decrease analysis time. The sample preparation and labeling methods for asparagine linked oligosaccharides are also addressed.

The use of magnetic nanoparticles in cancer theranostics: Toward handheld diagnostic devices.

Magnetic nanoparticles are frequently used in a wide range of biomedical applications. In the first part of this review the most commonly used preparation and surface coating approaches of MNPs are briefly summarized including multifunctional hybrid particles. The second part gives a detailed overview of the use of MNPs in "traditional" biomedical applications related to cancer theranostics, like magnetic resonance imaging, drug delivery, hyperthermia and also their applicability in the next generation of point of care devices based on micro nuclear magnetic resonance and surface enhanced Raman spectroscopic detection technology that all can be routinely applied in everyday clinical practice.

Tilted pillar array fabrication by the combination of proton beam writing and soft lithography for microfluidic cell capture: Part 1 Design and feasibility.

Design, fabrication, integration, and feasibility test results of a novel microfluidic cell capture device is presented, exploiting the advantages of proton beam writing to make lithographic irradiations under multiple target tilting angles and UV lithography to easily reproduce large area structures. A cell capture device is demonstrated with a unique doubly tilted micropillar array design for cell manipulation in microfluidic applications. Tilting the pillars increased their functional surface, therefore, enhanced fluidic interaction when special bioaffinity coating was used, and improved fluid dynamic behavior regarding cell culture injection. The proposed microstructures were capable to support adequate distribution of body fluids, such as blood, spinal fluid, etc., between the inlet and outlet of the microfluidic sample reservoirs, offering advanced cell capture capability on the functionalized surfaces. The hydrodynamic characteristics of the microfluidic systems were tested with yeast cells (similar size as red blood cells) for efficient capture.

Computational fluid dynamics-based design of a microfabricated cell capture device.

A microfluidic cell capture device was designed, fabricated, evaluated by numerical simulations and validated experimentally. The cell capture device was designed with a minimal footprint compartment comprising internal micropillars with the goal to obtain a compact, integrated bioanalytical system. The design of the device was accomplished by computational fluid dynamics (CFD) simulations. Various microdevice designs were rapidly prototyped in poly-dimethylsiloxane using conventional soft lithograpy technique applying micropatterned SU-8 epoxy based negative photoresist as moulding replica. The numerically modeled flow characteristics of the cell capture device were experimentally validated by tracing and microscopic recording the flow trajectories using yeast cells. Finally, we give some perspectives on how CFD modeling can be used in the early stage of microfluidics-based cell capture device development.

Ambidentate coordination in hydrogen bonded dimethyl sulfoxide, (CH3)2SO...H3O+, and in dichlorobis(dimethyl sulfoxide) palladium(II) and platinum(II) solid solvates, by vibrational and sulfur K-edge X-ray absorption spectroscopy.

The strongly hydrogen bonded species (CH3)2SO...H3O+ formed in concentrated hydrochloric acid displays a new low energy feature in its sulfur K-edge X-ray absorption near edge structure (XANES) spectrum. Density Functional Theory-Transition Potential (DFT-TP) calculations reveal that the strong hydrogen bonding decreases the energy of the transition S(1s) --> LUMO, which has antibonding sigma*(S-O) character, with about 0.8 eV. Normal coordinate force field analyses of the vibrational spectra show that the SO stretching force constant decreases from 4.72 N cm(-1) in neat liquid dimethyl sulfoxide to 3.73 N cm(-1) for the hydrogen bonded (CH3)2SO...H3O+ species. The effects of sulfur coordination on the ambidentate dimethyl sulfoxide molecule were investigated for the trans-Pd((CH3)2SO)2Cl2, trans-Pd((CD3)2SO)2Cl2 and cis-Pt((CH3)2SO)2Cl2 complexes with square planar coordination of the chlorine and sulfur atoms. The XANES spectra again showed shifts toward low energy for the transition S(1 s) --> LUMO, now with antibonding sigma*(M-Cl, M-S) character, with a larger shift for M = Pt than Pd. DFT-TP calculations indicated that the differences between the XANES spectra of the geometrical cis and trans isomers of the M((CH3)2SO)2Cl2 complexes are expected to be too small to allow experimental distinction. The vibrational spectra of the palladium(II) and platinum(II) complexes were recorded and complete assignments of the fundamentals were achieved. Even though the M-S bond distances are quite similar the high covalency especially of the Pt-S bonds induces significant increases in the S-O stretching force constants, 6.79 and 7.18 N cm(-1), respectively.

Cadmium(II) cysteine complexes in the solid state: a multispectroscopic study.

Cadmium(II) cysteinate compounds have recently been recognized to provide an environmentally friendly route for the production of CdS nanoparticles, used in semiconductors. In this article, we have studied the coordination for two cadmium(II) cysteinates, Cd(HCys)(2) x H(2)O (1) and {Cd(HCys)(2) x H(2)O}(2) x H(3)O(+)ClO(4)(-) (2), by means of vibrational (Raman and IR absorption), solid-state NMR ((113)Cd and (13)C), and Cd K- and L(3)-edge X-ray absorption spectroscopy. Indistinguishable Cd K-edge extended X-ray absorption fine structure (EXAFS) and Cd L(3)-edge X-ray absorption near edge structure (XANES) spectra were obtained for the two compounds, showing similar local structure around the cadmium(II) ions. The vibrational spectra show that the cysteine amine group is protonated (NH(3)(+)) and not involved in bonding. The (113)Cd solid-state cross-polarization magic angle spinning NMR spectra showed a broad signal in the approximately 500-700 ppm range, with the peak maximum at about 650 ppm, indicating three to four coordinated thiolate groups. Careful analyses of low-frequency Raman and far-IR spectra revealed bridging and terminal Cd-S vibrational bands. The average Cd-S distance of 2.52 +/- 0.02 A that constantly emerged from least-squares curve-fitting of the EXAFS spectra is consistent with CdS(4) and CdS(3)O coordination. Both structural models yielded reasonable values for the refined parameters, with a slightly better fit for the CdS(3)O configuration, for which the Cd-O distance of 2.27 +/- 0.04 A was obtained. The Cd L(3)-edge XANES spectra of 1 and 2 resembled that of the CdS(3)O model compound and showed that the coordination around Cd(II) ions in 1 and 2 cannot be exclusively CdS(4). The small separation of 176 cm(-1) between the infrared symmetric and antisymmetric COO(-) stretching modes indicates monodentate or strongly asymmetrical bidentate coordination of a cysteine carboxylate group in the CdS(3)O units. The combined results are consistent with a "cyclic/cage" type of structure for both the amorphous solids 1 and 2, composed of CdS(4) and CdS(3)O units with single thiolate (Cd-S-Cd) bridges, although a minor amount of cadmium(II) sites with CdS(3)O(2-3) and CdS(4)O coordination geometries cannot be ruled out.

Oxidative C-H and C-C bond cleavage by a (2,2'-bipyridine)copper(I) chloride complex.

Acetonitrile is easily oxygenated at ambient reaction conditions to copper(II) oxalate [Cu(bpy)(ox)] n mediated by copper(I) chloride in the presence of 3,5-di-tert-butylcatechol and 2,2'-bipyridine. In the case of other nitriles (e.g., propionitrile), instead, the unusual and selective 1,4-extradiol cleavage of 3,5-di-tert-butylcatechol occurs to give copper(II) tert-butylmaleate [Cu(bma)(bpy)(H2O)]n in good yield.

Infrared and Raman spectroscopic and theoretical studies of nonaaqua complexes of trivalent rare earth metal ions.

Infrared (IR), far-infrared (far-IR) and Raman spectra have been recorded of the hydrated lanthanide(III) trifluoromethanesulfonates, [Ln(OH2)9](CF3SO3)3, (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu), and also for the deuterated [La(OD2)9](CF3SO3)3 compound. This has enabled complete assignments of all seven metal-oxygen stretching modes for the first time. Force constant calculations have been performed for an LnO9(3+) moiety, with a tricapped trigonal prismatic oxygen atom arrangement in D3h point group symmetry. The lanthanide contraction in reflected in continuously increasing trends for the averaged LnO stretching frequencies and force constants with increasing inverse of ionic radii. The stretching force constants increased from 0.81 to 1.16 Ncm-1 for the LnO6 prism in the series from La to Lu, while those for the capping LnO3 bonds increased from 0.49 to 0.65 Ncm-1. The LnO stretching force constants showed a smooth correlation with the LnO bond distances to the prism oxygen atoms, while the correlation to the LnO capping oxygen atoms has a different shape, reflecting the increased ligand-ligand repulsion with decreasing lanthanide ion size.