ABSTRACT
To better understand the migration behavior of plastic fragments in the environment, development of rapid non-destructive methods for in-situ identification and characterization of plastic fragments is necessary. However, most of the studies had focused only on colored plastic fragments, ignoring colorless plastic fragments and the effects of different environmental media (backgrounds), thus underestimating their abundance. To address this issue, the present study used near-infrared spectroscopy to compare the identification of colored and colorless plastic fragments based on partial least squares-discriminant analysis (PLS-DA), extreme gradient boost, support vector machine and random forest classifier. The effects of polymer color, type, thickness, and background on the plastic fragments classification were evaluated. PLS-DA presented the best and most stable outcome, with higher robustness and lower misclassification rate. All models frequently misinterpreted colorless plastic fragments and its background when the fragment thickness was less than 0.1mm. A two-stage modeling method, which first distinguishes the plastic types and then identifies colorless plastic fragments that had been misclassified as background, was proposed. The method presented an accuracy higher than 99% in different backgrounds. In summary, this study developed a novel method for rapid and synchronous identification of colored and colorless plastic fragments under complex environmental backgrounds.
Subject(s)
Environmental Monitoring , Machine Learning , Plastics , Spectroscopy, Near-Infrared , Spectroscopy, Near-Infrared/methods , Environmental Monitoring/methods , Plastics/analysis , Least-Squares Analysis , Discriminant Analysis , ColorABSTRACT
A regular tetrahedron model was established to pierce the fractionation of dissolved organic matter (DOM) among quaternary components by using high-resolution mass spectrometry. The model can stereoscopically visualize molecular formulas of DOM to show the preference to each component according to the position in a regular tetrahedron. A classification method was subsequently developed to divide molecular formulas into 15 categories related to fractionation ratios, the relative change of which was demonstrated to be convergent with the uncertainty of mass peak area. The practicality of the regular tetrahedron model was verified by seven kinds of sludge from waste leachate treatment and sewage wastewater treatment plants by using stratification of extracellular polymeric substances coupled with Orbitrap MS as an example, presenting the DOM chemodiversity in stratified sludge flocs. Sensitivity analysis proved that classification results were relatively stable with the perturbation of four model parameters. Multinomial logistic regression analysis could further help identify the effect of molecular properties on the fractionation of DOM based on the classification results of the regular tetrahedron model. This model offers a methodology for the assessment of specificity of sequential extraction on DOM from solid or semisolid components and simplifies the complex mathematical expression of fractionation coefficients for quaternary components.
Subject(s)
Mass Spectrometry , Sewage , Sewage/chemistry , Organic Chemicals/chemistry , Chemical Fractionation , Models, Theoretical , Wastewater/chemistryABSTRACT
Revealing the role of functional redundancy is of great importance considering its key role in maintaining the stability of microbial ecosystems in response to various disturbances. However, experimental evidence on this point is still lacking due to the difficulty in "manipulating" and depicting the degree of redundancy. In this study, manipulative experiments of functional redundancy were conducted by adopting the mixed inoculation strategy to evaluate its role in engineered anaerobic digestion systems under ammonium inhibition conditions. The results indicated that the functional redundancy gradient was successfully constructed and confirmed by evidence from pathway levels. All mixed inoculation groups exhibited higher methane production regardless of the ammonium level, indicating that functional redundancy is crucial in maintaining the system's efficiency. Further analysis of the metagenome-assembled genomes within different functional guilds revealed that the extent of redundancy decreased along the direction of the anaerobic digestion flow, and the role of functional redundancy appeared to be related to the stress level. The study also found that microbial diversity of key functional populations might play a more important role than their abundance on the system's performance under stress. The findings provide direct evidence and highlight the critical role of functional redundancy in enhancing the efficiency and stability of anaerobic digestion.
Subject(s)
Ammonium Compounds , Microbiota , Anaerobiosis , Bioreactors , Metagenome , MethaneABSTRACT
Halogenated organic compounds in wastewater are persistent and bioaccumulative contaminants of great concern, but few are known at the molecular level. Herein, we focus on nontarget screening of halogenated dissolved organic matter (DOM) in highly concentrated organic matrices of waste leachates and their concentrates. Solid-phase extraction (SPE) was optimized before capturing halogenated signatures via HaloSeeker 2.0 software on mining full-scan high-resolution mass spectrometry (HRMS) fingerprints. This study identified 438 Cl-/Br-containing DOM formulas in 21 leachates and membrane concentrates. Among them, 334 formulas were achieved via SPE with mixed-sorbent cartridges (mixed-SPE), surpassing the 164 formulas achieved through Bond Elut PPL cartridges (PPL-SPE). Herein, only four samples identified via PPL-SPE exhibited a resolution of >50% for extracted Cl-/Br-containing DOM by either SPE. The halogenated DOM constituted 6.87% of the total DOM mass features. Nevertheless, more abundant adsorbable organic halogens deciphered waste leachates and highly concentrated waste streams as reservoirs for halogenated contaminants. Remarkably, 75.7-98.1% of Cl-/Br-containing DOM in primary membrane concentrates remained stable through the secondary membrane treatment, indicating the persistence of these unknown contaminants even post-treatment.
Subject(s)
Dissolved Organic Matter , Organic Chemicals , Mass Spectrometry , Organic Chemicals/analysis , Wastewater , Solid Phase Extraction/methodsABSTRACT
Insights into carbon sources (biogenic and fossil carbon) and contents in solid waste are vital for estimating the carbon emissions from incineration plants. However, the traditional methods are time-, labor-, and cost-intensive. Herein, high-quality data sets were established after analyzing the carbon contents and infrared spectra of substantial samples using elemental analysis and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), respectively. Then, five classification and eight regression machine learning (ML) models were evaluated to recognize the proportion of biogenic and fossil carbon in solid waste. Using the optimized data preprocessing approach, the random forest (RF) classifier with hyperparameter tuning ranked first in classifying the carbon group with a test accuracy of 0.969, and the carbon contents were successfully predicted by the RF regressor with R2 = 0.926 considering performance-interpretability-computation time competition. The above proposed algorithms were further validated with real environmental samples, which exhibited robust performance with an accuracy of 0.898 for carbon group classification and an R2 value of 0.851 for carbon content prediction. The reliable results indicate that ATR-FTIR coupled with ML algorithms is feasible for rapidly identifying both carbon groups and content, facilitating the calculation and assessment of carbon emissions from solid waste incineration.
ABSTRACT
In order to explore the source characteristics as well as the temporal and spatial variations in odor pollution in municipal waste landfills, gas samples were collected from a landfill in an eastern coastal area of China throughout winter and summer. The total concentration of malodorous substances reached 60000 µg·m-3. There were more types of odor pollutants detected in summer than in winter, the average concentration was 30-300 times higher than that in winter, and the concentration of sulfur compounds increased by 4.7-136.7 times in summer. Oxygenated compounds had the highest concentration, and the total concentration of sulfur compounds accounted for less than 10% of malodorous substances. However, sulfur compounds contributed more than 90% to the theoretical odor concentration. Sulfur compounds such as methyl mercaptan and propane mercaptan were the key odorants in the landfill. After the landfill unit was covered, the concentration of odorous substances and the theoretical odor concentration on the surface of the landfill showed an increasing trend with time, indicating that the covering had a certain odor barrier effect; however, the landfill unit still had a large odor release potential. The similarity analysis showed that the odorous gas accumulated in the unit with temporary cover and without an exhaust system could be released to the environment through the overlapping gap of the membrane and the location of membrane rupture, resulting in more serious odor pollution around the landfill at night than that during the day.
Subject(s)
Air Pollutants , Refuse Disposal , Air Pollutants/analysis , Environmental Monitoring/methods , Odorants/analysis , Refuse Disposal/methods , Solid Waste/analysis , Sulfhydryl Compounds/analysis , Sulfur Compounds/analysis , Waste Disposal FacilitiesABSTRACT
Rapid determination of moisture content plays an important role in guiding the recycling, treatment and disposal of solid waste, as the moisture content of solid waste directly affects the leachate generation, microbial activities, pollutants leaching and energy consumption during thermal treatment. Traditional moisture content measurement methods are time-consuming, cumbersome and destructive to samples. Therefore, a rapid and nondestructive method for determining the moisture content of solid waste has become a key technology. In this work, an attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and multiple machine learning methods was developed to predict the moisture content of multi-source solid waste (textile, paper, leather and wood waste). A combined model was proposed for moisture content regression prediction, and the applicability of 20 combinations of five spectral preprocessing methods and four regression algorithms were discussed to further improve the modeling accuracy. Furthermore, the prediction result based on the water-band spectra was compared with the prediction result based on the full-band spectra. The result showed that the combination model can efficiently predict the moisture content of multi-source solid waste, and the R2 values of the validation and test datasets and the root mean square error for the moisture prediction reached 0.9604, 0.9660, and 3.80, respectively after the hyperparameter optimization. The excellent performance indicated that the proposed combined models can rapidly and accurately measure the moisture content of solid waste, which is significant for the existing waste characterization scheme, and for the further real-time monitoring and management of solid waste treatment and disposal process.
Subject(s)
Environmental Pollutants , Solid Waste , Machine Learning , Solid Waste/analysis , Spectroscopy, Fourier Transform Infrared/methods , Water/chemistryABSTRACT
Polyvinyl chloride (PVC) is one of the most commonly used plastics. The treatment and recycling of PVC waste is still challenging, due to its non-biodegradability, low thermal stability, high Cl content and low product value. In this study, a one-pot method was developed to upcycle PVC into valuable carbon materials, pipeline-quality pyrolysis gas and chlorides. The well-designed process included dechlorination by Cl-fixative (ZnO or KOH), carbonization of dechlorinated polyenes, and modification of carbon materials in sequence. ZnO and KOH converted 84.48% and 94.15% of total Cl into corresponding chlorides, respectively. CH4 and H2 accounted for 81.87-99.34 vol% of pyrolysis gas with higher heat values of 30.11-32.84 MJ m-3, which can be used as substitute natural gas. As high as 83.13% of the C element was converted into carbon materials. The morphology, structure and property of carbon materials can be modified by different Cl-fixatives. Millimeter-scale carbon spheres with mono-dispersity and porous carbon with a high specific surface area of 1922 m2 g-1 were obtained when ZnO and KOH were added, respectively. Moreover, the reaction mechanisms of PVC with Cl-fixatives were also deciphered through thermogravimetric analysis and thermodynamic simulation.
ABSTRACT
During coronavirus disease 2019 pandemic, the exponential increase in clinical waste (CW) generation has caused immense burden to CW treatment facilities. Co-incineration of CW in municipal solid waste incinerator (MSWI) is an emergency treatment method. A material flow model was developed to estimate the change in feedstock characteristics and resulting acid gas emission under different CW co-incineration ratios. The ash contents and lower heating values of the feedstocks, as well as HCl concentrations in flue gas showed an upward trend. Subsequently, 72 incineration residue samples were collected from a MSWI performing co-incineration (CW ratio <10 wt%) in Wuhan city, China, followed by 20 incineration residues samples from waste that were not co-incineration. The results showed that the contents of major elements and non-volatile heavy metals in the air pollution control residues increased during co-incineration but were within the reported ranges, whereas those in the bottom ashes revealed no significant changes. The impact of CW co-incineration at a ratio <10 wt% on the distribution of elements in the incineration residues was not significant. However, increase in alkali metals and HCl in flue gas may cause potential boiler corrosion. These results provide valuable insights into pollution control in MSWI during pandemic.
Subject(s)
COVID-19 , Metals, Heavy , Refuse Disposal , Coal Ash , Humans , Incineration , Pandemics , SARS-CoV-2 , Solid Waste/analysisABSTRACT
Loess is widely distributed in northwestern China. Due to the arid climate and rainstorm erosion, lack of nutrients and microorganisms, as well as severe salinization limits the ecosystem carrying capacity of loess soil, which has become one of the major causes of regional land desertification. The fermentation broth derived from food waste usually contains substantial organic acids and nutrients such as nitrogen and phosphorus, and it has the advantages of being easily produced industrially and applied as fertilizer. Hence, this broth has the potential to become a soil amendment for loess soils. This work studied the Lanzhou loess, which is a typical soil of the Loess Plateau of China, fertilized with fermentation broth for the evaluation of physicochemical properties and microbial analyses. After the application of the broth amendment, the total nitrogen, available phosphorus and potassium, and organic matter content increased by 363%, 577%, 308%, and 204%, respectively. After planting grass, including Halogeton arachnoideus Moq. and Medicago sativa L., the comprehensive soil fertility level was further improved and the total salt content of the soil was decreased by 2.3 g·kg-1 and 1.2 g·kg-1, respectively. Meanwhile, the fermentation broth promoted the growth of microorganisms, including bacteria and archaea, which increased by 22 times, and fungi by 8.3 times. Therefore, food waste fermentation broth is conducive to further forming plant-microorganisms symbiosis, improving the ecological environment quality of loess soils.
Subject(s)
Refuse Disposal , Soil , Conservation of Natural Resources , Ecosystem , Fermentation , FoodABSTRACT
Properties of landfill leachate are complex. Therefore, leachate should be treated by combined processes with both biological and advanced methods. Due to the shortage of engineering-scale assessment data about the pollutant treatment contribution of individual process units, existing optimization methods still lack theoretical support. Here, a membrane biological reactor (MBR)+nanofiltration (NF) system with a capacity of 800 m3·d-1 was examined. Conventional physiochemical parameters and fluorescent parameters were examined to analyze the contribution of each process unit to treating mature landfill leachate. Furthermore, the transformation of dissolved organic matter (DOM) was evaluated using excitation emission matrix fluorescence spectroscopy-parallel factor (EEMs-PARAFAC). Results showed that the biological treatment removed soluble nitrogen (dissolved nitrogen, DN) by 74.7%, 54.6% occurred in the first-stage denitrification unit. The external ultrafiltration unit reduced dissolved chemical oxygen demand (COD) and dissolved organic carbon (DOC) by 92.2% and 93.3%, respectively. The nanofiltration unit effectively removed heavy metals and salts. Based on the tracking of DOM using fluorescent parameters, the first-stage denitrification unit was found to remove 75.4% of protein-like substances. The ultrafiltration unit mainly retained DOM with high hydrophilicity, while humus with high aromaticity was mainly retained by nanofiltration. The higher the degree of humification, the better the interception effect that was obtained. This indicates that biological treatment using the MBR process can be simplified, and ultrafiltration should prove reliable at preventing clogging during the treatment of mature landfill leachate.
Subject(s)
Environmental Pollutants , Water Pollutants, Chemical , Biological Oxygen Demand Analysis , Nitrogen , Ultrafiltration , Water Pollutants, Chemical/analysisABSTRACT
The explosive growth of polyethylene terephthalate (PET) wastes has brought serious pollution to the environment. Here, PET waste was upcycled into methane-rich pyrolysis gas and carbon material for energy storage through autogenic pressure pyrolysis and post-activation. The pyrolysis gas contained 34.58 ± 0.23 vol% CH4. After CO2 removal, the high caloric value of the pyrolysis gas could reach 29.2 MJ m-3, which could be used as a substitute natural gas. Pyrolytic carbon was further activated by KOH and ZnCl2. KOH-activated carbon (AC-K) obtained a hierarchical porous structure, a high specific surface area of 2683 m2 g-1 and abundant surface functional groups. Working as supercapacitor electrodes, AC-K exhibited an outstanding specific capacitance of 325 F g-1 at a current density of 0.5 A g-1. After 5000 charge-discharge cycles, AC-K still retained 91.86% of the initial specific capacitance. This study provides a sustainable way to control plastic-derived pollution and alleviate the energy crisis.
ABSTRACT
Solid waste incineration is a major emission source of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). The injection of N- and S-containing compounds is an effective way to suppress the formation of PCDD/Fs, but this approach is still shortcoming because additional pollutants such as NH3 and SOx are emitted. To avoid the secondary pollutions, a de novo synthesis inhibition mechanism in the presence of CaO was postulated to transform CuCl2 to CuO and deplete Cl2 and HCl. Chlorobenzenes (CBzs), which are indicators and precursors of PCDD/Fs, were adopted to prove the inhibitory effect of CaO at 400 °C, using both simulated synthetic ash and extracted air pollution control residues. As the molar ratio of CaO to CuCl2 exceeded 3, the residual carbon increased, and the inhibition efficiency of CBzs exceeded 93 %. This performance is superior to the corresponding performance of NH4H2PO4, which has been proved to be a potential inhibitor. Furthermore, with CaO, chlorides remained in the solid phase and had inactive catalytic performance; and they were the major products rather than HCl, Cl2 and Cu2OCl2. The addition of CaO during waste incineration therefore can facilitate the abatement of PCDD/Fs contamination and reduce the emissions of acid gas simultaneously.
ABSTRACT
Biochar is widely used in environmental pollution remediation, soil improvement, and biotransformation of waste. However, the leachable substances within biochar may leach out during the application process, causing detrimental effects to the reaction system and the environment. Here, the simulated solutions (distilled water, buffer salt solution, methanol, and humic acid solution) at different stages of anaerobic digestion were used as the extracting agents, and high-resolution liquid chromatography-mass spectrometry was used to study the dissolved organic composition of biochar leachates. A total of 536 effective substances were detected in the biochar leachates, of which 100 substances were highly matched to the standard substance database. The molecular weights of these 100 substances, which included phenols, aromatic acids, aromatic aldehydes and ketones, aliphatic acids, and other substances, were in the range of 109-458 and averaged 290.2. The buffer salt solution, which is commonly used for anaerobic culturing, extracted three additional aliphatic acids and four additional aromatic substances from biochar than distilled water as used in traditional research methods; the leachate of methanol contained the most diverse compounds-71 in total-including a large number of phenols and organic acids. Some humic acid organic substances are adsorbed by biochar during the leaching by humic acid, including alcohols and aliphatic acids, but humic acid still promoted the leaching of phenolic substances, while the total number of substances that were detected was reduced by 41.7%.
ABSTRACT
Chemical waste compositions are important for municipal solid waste management, as they determine the pollution potentials from different waste strategies. A representative dataset for chemical characteristics of individual waste fractions is frequently required to assess chemical waste composition, but it is usually reported in developed countries and not in developing countries. In this study, a dataset for Chinese waste was established through careful data screening and assessment, named as CN dataset. Meanwhile, a dataset for Danish waste (DK dataset) was also summarized based on previous studies. In order to quantitatively evaluate the reliabilities of CN and DK datasets, the chemical waste compositions in four Chinese cities were estimated by utilizing both of them, respectively. It is indicated that the usage of CN datasets led to significantly lower discrepancies from the actual values based on laboratory analysis in most cases. Within the datasets, the moisture contents of food waste, paper, textiles, and plastics, the carbon content of food waste, as well as the oxygen content of plastics would induce significant divergences, which should be paid special attention when gathering the information. In addition, the fractional waste compositions in China showed similar features with other developing countries but differ significantly with developed countries. Thus the above-mentioned conclusions could also be true in other developing countries.
Subject(s)
Solid Waste/analysis , China , Cities , Databases, Factual , Denmark , Waste ManagementABSTRACT
The direct application of fresh compost is frequent in practice and might cause odor pollution. The present study investigated the characteristics of odor emissions and aimed to estimate the environmental effect of odor over the course of storage and application. An odors emission potential test lasting 21 days was conducted using primarily fermented fruit and vegetable waste compost. The results showed that the fresh compost primarily emitted ammonia, as well as sulfur compounds, benzenes, and terpenes throughout the experiment. Alcohol and aldehyde emissions decreased over time, whereas ketone emissions were consistently low. By simulating two scenarios-one in an enclosed space and one in open air-the quantity of fresh compost could be applied or stored, and the protective distance was calculated from the point of odor potential.
Subject(s)
Air Pollutants/analysis , Composting , Odorants/analysis , Environmental MonitoringABSTRACT
The characteristics of air pollution control (APC) residues are influenced by the furnace type, APC system, and waste composition. In this study, the characteristics of APC residues from nine municipal solid waste incineration plants (the compositions of incinerated solid waste are similar) with different furnace types and APC systems were compared.APC residues contain a great amount of Ca and Cl, and the contents of Al, Si, and Fe in the APC residues from fluidized bed incinerators are higher. The mineral compositions of APC residues are not influenced by the flue gas treatment process, but their contents vary. The contents of Cd, Pb, and Zn in the APC residues from fluidized bed incinerators are lower, while those of Cr, Ba, Cu, and Ni are greatly influenced by the APC systems, with the "grate+dry scrubber" APC residues having the lowest values. The differences in the heavy metal contents in the APC residues from two incinerators before and after the upgrading of the APC systems are not significant. The leaching toxicity of Pb in the APC residues from grate incinerators is higher than that from fluidized bed incinerators, while some elements with low contents in fluidized bed APC residues can be leached more in acetic acid buffer solution. The acid neutralization capacity of the APC residues is related to Ca content. The leaching concentrations of most heavy metals are significantly increased under strong acidity (Cd, Ni, and Zn:leachate pH < 8; Pb, Cu, and Cr:leachate pH < 4). The maximum leaching concentrations of As, Ba, Cu, Ni, and Pb in the APC residues from grate incinerators are mainly controlled by their total content. The leaching concentrations of As, Ba, Cu, Ni, and Pb in the APC residues from fluidized bed incinerators are lower than those from grate incinerators with similar metal contents, which may be due to their different chemical speciation influenced by furnace types and the complexation with Al and Fe compounds.
ABSTRACT
Flue gas desulfurization residues (FGDR) are the main solid wastes produced in coal-fired power plants that can be reused as alternative materials for civil and agricultural applications. However, the pollutants contained in the FGDR might contaminate the local environment, hindering their material reuse. In this study, the physical-chemical characteristics, leaching, and phytotoxicity (Triticum aestivum) of the material were investigated. The FGDR samples were obtained from three pulverized coal-fired power plants in China. Multivariate statistical analyses were used to consider the contributions of the leaching components to the germination index of wheat seeds in the FGDR leachates. The FGDR contained a high percentage of amorphous mass. The ranges of selected metals and micronutrients in the FGDR are As (31.5-63.0 mg/kg), B (574-3090 mg/kg), Ba (2799-3073 mg/kg), Cr (up to 4.73 mg/kg), Cu (0.29-1.38 mg/kg), Mn (136-370 mg/kg), Ni (9.93-22.9 mg/kg), Pb (1.29-7.29 mg/kg), Sr (886-1706 mg/kg), and Zn (335-458 mg/kg). The leaching toxicity of the FGDR leachates was lower than the regulatory limit of the identification standards for hazardous waste, indicating that the FGDR are non-hazardous materials. Metals, especially Ba, Cu, Fe, and Pb, as well as As and B, in the leachate had inhibitory effects on seed germination than the other constituents. The results in this study showed that the leachate phytotoxicity resulting from FGDR could be evaluated before the utilization of FGDR, giving crucial information for the adaptation of these alternative materials.
Subject(s)
Environmental Monitoring , Power Plants , Water Pollutants, Chemical/analysis , Agriculture , China , Coal/analysis , Germination/drug effects , Metals/analysis , Solid Waste/analysisABSTRACT
The use of coal fly ash (CFA), municipal solid waste incinerator bottom ash (MSWIBA) and flue gas desulfurization residue (FGDR) in road construction has become very common owing to its economical advantages. However, these residues may contain toxic constituents that pose an environmental risk if they leach out and flow through the soil, surface water and groundwater. Therefore, it is necessary to assess the ecotoxicity and groundwater impact of these residues before decisions can be made regarding their utilization for road construction. In this study, the physico-chemical characteristics, leaching and phytotoxicity of these residues were investigated. Specifically, multivariate analyses were used to evaluate the contributions of the leaching constituents of the CFA, MSWIBA and FGDR leachates to the germination index of wheat seeds. B, Ba, Cr, Cu, Fe and Pb were found to be more toxic to the wheat seeds than the other heavy metals. Furthermore, the leached concentrations of the constituents from the CFA, MSWIBA and FGDR were below the regulatory threshold limits of the Chinese identification standard for hazardous wastes. Analyses conducted using a numerical groundwater model (WiscLEACH) indicated that the predicted field concentrations of metals from the CFA, MSWIBA and FGDR increased with time up to about 30years at the point of compliance, then decreased with time and distance. Overall, this study demonstrated that the risks resulting from MSWIBA, CFA and FGDR leaching could be assessed before its utilization for road construction, providing crucial information for the adoption of these alternative materials.
Subject(s)
Construction Materials , Environmental Monitoring , Groundwater/chemistry , Transportation , Water Pollutants, Chemical/analysis , Coal Ash/chemistry , Incineration , Metals, Heavy/analysisABSTRACT
Bio-stability is a key feature for the utilization and final disposal of biowaste-derived residues, such as aerobic compost or vermicompost of food waste, bio-dried waste, anaerobic digestate or landfilled waste. The present paper reviews conventional methods and advanced techniques used for the assessment of bio-stability. The conventional methods are reclassified into two categories. Advanced techniques, including spectroscopic (fluorescent, ultraviolet-visible, infrared, Raman, nuclear magnetic resonance), thermogravimetric and thermochemolysis analysis, are emphasized for their application in bio-stability assessment in recent years. Their principles, pros and cons are critically discussed. These advanced techniques are found to be convenient in sample preparation and to supply diversified information. However, the viability of these techniques as potential indicators for bio-stability assessment ultimately lies in the establishment of the relationship of advanced ones with the conventional methods, especially with the methods based on biotic response. Furthermore, some misuses in data explanation should be noted.