The Parallel Transformations of Polycyclic Aromatic Hydrocarbons in the Body and in the Atmosphere.

BACKGROUND: Polycyclic aromatic hydrocarbons (PAHs) emitted from combustion sources are known to be mutagenic, with more potent species also being carcinogenic. Previous studies show that PAHs can undergo complex transformations both in the body and in the atmosphere, yet these transformation processes are generally investigated separately. OBJECTIVES: Drawing from the literature in atmospheric chemistry and toxicology, we highlight the parallel transformations of PAHs that occur in the atmosphere and the body and discuss implications for public health. We also examine key uncertainties related to the toxicity of atmospheric oxidation products of PAHs and explore critical areas for future research. DISCUSSION: We focus on a key mode of toxicity for PAHs, in which metabolic processes (driven by cytochrome P450 enzymes), leads to the formation of oxidized PAHs that can damage DNA. Such species can also be formed abiotically in the atmosphere from natural oxidation processes, potentially augmenting PAH toxicity by skipping the necessary metabolic steps that activate their mutagenicity. Despite the large body of literature related to these two general pathways, the extent to which atmospheric oxidation affects a PAH's overall toxicity remains highly uncertain. Combining knowledge and promoting collaboration across both fields can help identify key oxidation pathways and the resulting products that impact public health. CONCLUSIONS: Cross-disciplinary research, in which toxicology studies evaluate atmospheric oxidation products and their mixtures, and atmospheric measurements examine the formation of compounds that are known to be most toxic. Close collaboration between research communities can help narrow down which PAHs, and which PAH degradation products, should be targeted when assessing public health risks. https://doi.org/10.1289/EHP9984.

Bottom-Up Synthesized All-Thermal-Catalyst Aerogels for Heat-Regenerative Air Filtration.

Airborne particular matter (PM) pollution is an increasing global issue and alternative sources of filter fibers are now an area of significant focus. Compared with relatively mature hazardous gas treatments, state of the art high-efficiency PM filters still lack thermal decomposition ability for organic PM pollutants, such as soot from coal-fired power plants and waste-combustion incinerators, resulting in frequent replacement, high cost, and second-hand pollution. In this manuscript, we propose a bottom-up synthesis method to make the first all-thermal-catalyst air filter (ATCAF). Self-assembled from ∼50 nm diameter TiO2 fibers, ATCAF could not only capture the combustion-generated PM pollutants with >99.999% efficiency but also catalyze the complete decomposition of the as-captured hydrocarbon pollutants at high temperature. It has the potential of in situ eliminating the PM pollutants from burning of hydrocarbon materials leveraging the burning heat.

Global Cancer Risk From Unregulated Polycyclic Aromatic Hydrocarbons.

In assessments of cancer risk from atmospheric polycyclic aromatic hydrocarbons (PAHs), scientists and regulators rarely consider the complex mixture of emitted compounds and degradation products, and they often represent the entire mixture using a single emitted compound-benzo[a]pyrene. Here, we show that benzo[a]pyrene is a poor indicator of PAH risk distribution and management: nearly 90% of cancer risk worldwide results from other PAHs, including unregulated degradation products of emitted PAHs. We develop and apply a global-scale atmospheric model and conduct health impact analyses to estimate human cancer risk from 16 PAHs and several of their N-PAH degradation products. We find that benzo[a]pyrene is a minor contributor to the total cancer risks of PAHs (11%); the remaining risk comes from other directly emitted PAHs (72%) and N-PAHs (17%). We show that assessment and policy-making that relies solely on benzo[a]pyrene exposure provides misleading estimates of risk distribution, the importance of chemical processes, and the prospects for risk mitigation. We conclude that researchers and decision-makers should consider additional PAHs as well as degradation products.

Hydrogen-catalyzed, pilot-scale production of small-diameter boron nitride nanotubes and their macroscopic assemblies.

Boron nitride nanotubes (BNNTs) exhibit a range of properties that are as compelling as those of carbon nanotubes (CNTs); however, very low production volumes have prevented the science and technology of BNNTs from evolving at even a fraction of the pace of CNTs. Here we report the high-yield production of small-diameter BNNTs from pure hexagonal boron nitride powder in an induction thermal plasma process. Few-walled, highly crystalline small-diameter BNNTs (∼5 nm) are produced exclusively and at an unprecedentedly high rate approaching 20 g/h, without the need for metal catalysts. An exceptionally high cooling rate (∼10(5) K/s) in the induction plasma provides a strong driving force for the abundant nucleation of small-sized B droplets, which are known as effective precursors for small-diameter BNNTs. It is also found that the addition of hydrogen to the reactant gases is crucial for achieving such high-quality, high-yield growth of BNNTs. In the plasma process, hydrogen inhibits the formation of N2 from N radicals and promotes the creation of B-N-H intermediate species, which provide faster chemical pathways to the re-formation of a h-BN-like phase in comparison to nitridation from N2. We also demonstrate the fabrication of macroscopic BNNT assemblies such as yarns, sheets, buckypapers, and transparent thin films at large scales. These findings represent a seminal milestone toward the exploitation of BNNTs in real-world applications.

Enrichment of large-diameter semiconducting SWCNTs by polyfluorene extraction for high network density thin film transistors.

A systematic study on the use of 9,9-dialkylfluorene homopolymers (PFs) for large-diameter semiconducting (sc-) single-walled carbon nanotube (SWCNT) enrichment is the focus of this report. The enrichment is based on a simple three-step extraction process: (1) dispersion of as-produced SWCNTs in a PF solution; (2) centrifugation at a low speed to separate the enriched sc-tubes; (3) filtration to collect the enriched sc-SWCNTs and remove excess polymer. The effect of the extraction conditions on the purity and yield including molecular weight and alkyl side-chain length of the polymers, SWCNT concentration, and polymer/SWCNT ratio have been examined. It was observed that PFs with alkyl chain lengths of C10, C12, C14, and C18, all have an excellent capability to enrich laser-ablation sc-SWCNTs when their molecular weight is larger than ∼10 000 Da. More detailed studies were therefore carried out with the C12 polymer, poly(9,9-di-n-dodecylfluorene), PFDD. It was found that a high polymer/SWCNT ratio leads to an enhanced yield but a reduced sc-purity. A ratio of 0.5-1.0 gives an excellent sc-purity and a yield of 5-10% in a single extraction as assessed by UV-vis-NIR absorption spectra. The yield can also be promoted by multiple extractions while maintaining high sc-purity. Mechanistic experiments involving time-lapse dispersion studies reveal that m-SWCNTs have a lower propensity to be dispersed, yielding a sc-SWCNT enriched material in the supernatant. Dispersion stability studies with partially enriched sc-SWCNT material further reveal that m-SWCNTs : PFDD complexes will re-aggregate faster than sc-SWCNTs : PFDD complexes, providing further sc-SWCNT enrichment. This result confirms that the enrichment was due to the much tighter bundles in raw materials and the more rapid bundling in dispersion of the m-SWCNTs. The sc-purity is also confirmed by Raman spectroscopy and photoluminescence excitation (PLE) mapping. The latter shows that the enriched sc-SWCNT sample has a narrow chirality and diameter distribution dominated by the (10,9) species with d = 1.29 nm. The enriched sc-SWCNTs allow a simple drop-casting method to form a dense nanotube network on SiO2/Si substrates, leading to thin film transistors (TFTs) with an average mobility of 27 cm(2) V(-1) s(-1) and an average on/off current ratio of 1.8 × 10(6) when considering all 25 devices having 25 µm channel length prepared on a single chip. The results presented herein demonstrate how an easily scalable technique provides large-diameter sc-SWCNTs with high purity, further enabling the best TFT performance reported to date for conjugated polymer enriched sc-SWCNTs.

Ultraviolet ZnSe1-xSx gradient-alloyed nanocrystals via a noninjection approach.

Highly emissive ultraviolet ZnSeS nanocrystals (NCs), with a core-shell-like structure, were designed and synthesized via a one-step noninjection approach in 1-octadecene (ODE). These ultraviolet ZnSeS NCs exhibit bright bandgap emission with high color purity and little trap emission. With full width at half-maximum (fwhm) of ∼21 nm only, photoluminescent (PL) quantum yield (QY) of ∼60% was estimated for one ensemble dispersed in toluene exhibiting bandgap absorption peaking at ∼380 nm and bandgap emission at ∼389 nm. These alloyed ZnSeS NCs present a cubic crystal structure consisting of a Se-rich core and a S-rich shell. Such a gradiently alloyed structure was suggested by our investigation on the temporal evolution of optical properties of the growing ZnSeS NCs monitored from 80 to 300 °C, together with structural and compositional characterization performed with XRD, XPS, EDX, and TEM. This newly developed one-step noninjection approach was achieved with zinc oleate (Zn(OA)(2)), diphenylphosphine selenide (SeDPP), and diphenylphosphine sulfide (SDPP) as Zn, Se, and S precursors, respectively. ZnSe monomers mainly participated in nucleation at ∼120 °C, while both ZnSe and ZnS monomers contributed to NC formation in later growth stages (∼160 °C and higher). (31)P NMR study demonstrates that SeDPP is more reactive than SDPP toward Zn(OA)(2), and also supports such a model proposed on the combination of ZnSe and ZnS monomers leading to nucleation/growth of ZnSeS alloyed NCs. The present study offers conceptual methodology to various highly photoluminescent alloyed NCs with high quality, high particle yield, and high synthetic reproducibility.

Highly-photoluminescent ZnSe nanocrystals via a non-injection-based approach with precursor reactivity elevated by a secondary phosphine.

Highly-photoluminescent ZnSe quantum dots with 72% quantum yield and 22 nm full width at half maximum were synthesized with more reactive precursors via a non-injection approach with high synthetic reproducibility; (31)P NMR provided insight into the formation mechanisms of ZnSe monomers.

Preliminary studies of an 18-crown-6 ether modified magnetic cation exchange polymer in rapid (90)Sr bioassay.

A cation exchange polymer resin embedded with magnetic nanoparticles and modified with crown ether was developed for urinalysis to rapidly monitor levels of (90)Sr exposure in humans who have been involved in a nuclear event. Invention of the resin matrix of 2-acrylamido-2-methyl-1-propanesulfonic acid cross-linked with divinylbenzene incorporated a Sr(2+) chelating agent, di-tert-butyl-cyclohexano-18-crown-6 through surface immobilization using a molecular modifier 1-octanol. The performance of these magnetic cation exchange resin particles was investigated by separating (90)Sr in the presence of (90)Y progeny. Masking agents and precipitants were examined to ascertain that sodium hydroxide at pH 7.5 was capable of selectively removing 89 ± 2% (90)Y before subsequent (90)Sr uptake. Preliminary investigations in rapid urinalysis were successful in isolating 83 ± 2% (90)Sr when pH was optimized to 9, with a sample turnover time <2 h, which is promising for radiological emergencies.

Molecularly imprinted polypyrrole encapsulated carbon nanotubes in stainless steel frit for micro solid phase extraction of estrogenic compounds.

A novel micro-solid phase extraction (microSPE) device was prepared by electrochemically adhering molecularly imprinted polypyrrole encapsulated carbon nanotubes (MIPPy/CNTs) onto a stainless steel frit. It was found that the use of CNTs increased the total binding capacity without compromising the porosity of the frit. Three templates, 17alpha-ethynyl estradiol (EE2), 17beta-estradiol (E2), and ochratoxin A (OTA) were imprinted individually to make their respective MIPPy/CNTs-modified frits. The binding properties of these microSPE devices were characterized by high performance liquid chromatography (HPLC) with fluorescence detection (FLD). In comparison with non-imprinted polypyrrole encapsulated carbon nanotubes (PPy/CNTs), the molecular imprinting technique enhanced the selective binding towards the imprint molecules. MIPPy/CNTs-microSPE-HPLC-FLD results demonstrated the selectivity of MIPPy had been tailored by imprinting with different templates. This is the first report on how versatile pyrrole can be as a functional monomer for the molecular imprinting of target compounds with a broad range of high to low pKa values.