Terlipressin versus placebo or noradrenalin in the treatment of hepatorenal syndrome: a systematic review and meta-analysis.

Background: Hepatorenal syndrome (HRS) bears a very poor prognosis with unmet need for safe and effective therapies. This systematic review and meta-analysis aimed to re-assess safety and efficacy of terlipressin versus placebo or noradrenaline for HRS, based on previous randomized controlled trials (RCTs). Methods: PubMed, EMBASE, MEDLINE (OvidSP) and Cochrane registers were searched for trials reporting HRS treatment by terlipressin or noradrenaline. Search terms included: "hepatorenal syndrome", "terlipressin", "noradrenaline", and corresponding synonyms. Comparisons between terlipressin, noradreanaline, placebo and albumin were included. Meta-analysis was conducted for treatment response (both HRS reversal and complete response), mortality and adverse events. Results: 15 RCTs were included, enrolling 1236 HRS patients (type 1: 1166, type 2: 70). Treatment with terlipressin+albumin resulted in significantly higher treatment response than placebo+albumin or albumin alone (risk ratio [RR]:2.75, 95% confidence interval [CI]:1.96 to 3.84; I2 = 28%, p = 0.23; n = 6). Noradrenaline was equally effective in treatment response compared to terlipressin (RR:1.19, 95% CI:0.96 to 1.46; I2 = 16%, p = 0.31; n = 7), but trials were limited by its non-blind design and small size. Sensitivity analysis showed no survival benefit with terlipressin compared to either placebo (RR:1.03, 95% CI:0.83 to 1.28; I2 = 0%, p = 0.72; n = 3) or noradreanline (RR:0.83, 95% CI:0.69 to 1.00; I2 = 4%, p = 0.39; n = 7) at 30 days of follow-up. Terlipressin carried higher risk of treatment-related adverse events compared to either placebo (RR:2.92, 95% CI:1.48 to 5.77; I2 = 0%, p = 0.75; n = 3) or noradrenaline (RR:2.45, 95% CI:1.37 to 4.37; I2 = 0%, p = 0.92; n = 5). Conclusion: Terlipressin is superior to placebo, and comparable to noradreanline in treatment response, but survival benefit is lacking. Noradrenaline, with low certainty, may be a better alternative for HRS.

Schwann cells transplantation improves nerve injury and alleviates neuropathic pain in rats.

The mechanism of neuropathic pain induced by nerve injury is complex and there are no effective treatment methods. P2X4 receptor expression is closely related to the occurrence of pain. Schwann cells (SCs) play a key protective role in the repair of peripheral nerve injury and myelin sheath regeneration. However, whether SCs can affect the expression of P2X4 receptor and play a role in pathological pain is still unclear. Therefore, this study investigated the effect of SCs on whether they can down regulate the expression of P2X4 receptor to affect pain. The results showed that in the neuropathic pain induced by sciatic nerve injury model, the expression of P2X4 receptor in spinal cord tissue was significantly increased and the pain sensation of rats was increased. While SCs transplantation could down regulate the expression of P2X4 receptors in spinal cord and increase the mechanical withdrawal threshold (MWT) and thermal withdrawal latency (TWL) of rats. These data indicate that SCs can reduce the expression of P2X4 receptors to alleviate neuropathic pain, indicating that SCs can mediate P2X4 receptor signalling as a new target for pain treatment.

"Two zones and three centers" distribution and suitable areas shift of an evergreen oak in subtropical China under climate scenarios.

Understanding the impact of climate change on the geographical distribution of species is a fundamental requirement for biodiversity conservation and resource management. Quercus oxyphylla, an evergreen oak endemic to China, plays a crucial role in maintaining the ecological stability in subtropical regions and high economic value attributed to its dark and high-density heartwood, but the existing resources are close to endangered. Currently, limited knowledge exists regarding its distribution and potential influences of climate change on suitable areas. This study utilized 63 occurrence records and Biomod2 platform, to predict changes in suitable areas for Q. oxyphylla under future climate change. The results revealed that (1) Q. oxyphylla showed a pattern of three disjunctive geographical centers in the eastern subregion of subtropical evergreen broad-leaved forest region (IVA): Qinling-Daba Mountains, Nanling Mountains and Wuyi Mountains center. Currently, the highly suitable areas concentrated in two zones divided by the Yangtze River, that is, the northern subtropical evergreen and deciduous broad-leaved forest zone (IVAii) and the mid-subtropical evergreen broad-leaved forest zone (IVAi). (2) The temperature-related variables, such as annual temperature range (Bio7), the mean diurnal range (Bio2), and annual mean temperature (Bio1), were identified as the key determinants of the distribution pattern. Because of its considerable climatic variations in temperature and water conditions, Q. oxyphylla's habitat displayed a wider climate niche and strong physiological tolerance to climate change. (3) Under future climate scenarios, the suitable area of the species was expected to overall expand with significant regional differences. The suitable area in IVAi was expected to expand significantly northward while that in IVAii was expected to gradually shrink. To address the impact of climate change, it is necessary to develop conservation plans focused around the three distribution centers, implement localized and regional conservation policies, and conduct educational outreach among local people.

High buttocks supine position to reduce small bowel exposure in gynecological radiotherapy.

PURPOSE: To minimize radiation exposure to the small bowel (SB) in patients undergoing treatment for gynecological tumors by adopting a comfortable positioning method. METHODS AND PATIENTS: All 76 women undergoing Intensity-Modulated Radiation Therapy (IMRT) were included in this study. Patients were immobilized in a supine position using a vacuum bag and thermoplastic cast formation. In the trial group (n = 36), patients raised their buttocks and a solid foam pad was placed under the sacral tail before immobilization. The control group (n = 40) received treatment in the standard supine position. The SB was delineated from the pubic symphysis to the total iliac bifurcation in computed tomography (CT) scans. RESULT: In the trial group, a significant reduction in SB volume within the pelvic cavity was observed (mean 399.17 ± 158.7 cc) compared to the control group (mean 547.48 ± 166.9 cc), with a p-value less than 0.001. The trial group showed a statistically significant reduction in the absolute volume of irradiated SB at each dose, ranging from the low dose (10 Gy) to the high dose (45 Gy). In the control group, a negative correlation was found between SB and bladder volumes (R = -0.411, P = 0.008), whereas in the trial group, this correlation was weaker (R = -0.286, P = 0.091), with no significant relationship observed between bladder volume and SB. CONCLUSION: The high buttocks supine position effectively reduces SB radiation exposure without the need for bladder distension. This positioning method holds promise for reducing SB irradiation in various pelvic tumors.

Enhancing the Mechanical Properties of AM60B Magnesium Alloys through Graphene Addition: Characterization and Regression Analysis.

The light weight and high strength of magnesium alloys have garnered significant attention, rendering them suitable for various applications across industries. Nevertheless, to meet industrial requirements, the mechanical properties must be improved. This investigation explores the potential of graphene addition to enhance the mechanical properties of AM60B magnesium alloy. Tests were conducted on samples with different weight percentages (wt.%) of graphene (0 wt.%, 0.1 wt.%, and 0.2 wt.%) using stir casting. The elongation and tensile strength of the composite materials were also assessed. The phase composition, particle size, and agglomeration phenomena were analyzed using characterization techniques such as X-ray diffraction, optical microscopy, and SEM-EDS. The yield strength of the magnesium alloy was enhanced by approximately 13.4% with the incorporation of 0.1 wt.% graphene compared to the alloy without graphene. Additionally, an 8.8% increase in elongation was observed. However, the alloy tensile properties were reduced by adding 0.2 wt.% graphene. The tensile fractography results indicated a higher probability of brittle fracture with 0.2 wt.% graphene. Furthermore, regression analysis employing machine learning techniques revealed the potential of predicting the stress-strain curve of composite materials.

A new species of the newt genus Hypselotriton (Amphibia, Urodela, Salamandridae) from Jiangxi Province, southeastern China.

A new newt species, Hypselotritonhuanggangensis sp. nov., is described based on nine specimens collected from Huanggangshan Mountains, Yanshan County, Jiangxi, China. Morphologically, the new species is characterized by the combination of nine external characters: (1) obvious black patches with clear boundaries on the whole body; (2) ground color of the dorsal body tan; (3) ground color of venter bright orange; (4) skin rough; (5) vertebral ridge weak; (6) fingers and toes overlapping when forelimb and hindlimb adpressed towards each other along body; (7) postocular orange spot absent; (8) small white warty glands around the eye; (9) two discontinuous longitudinal lines formed by white warty glands from neck to lateral parts of tail. Molecularly, the new species forms an independent clade with strong support in the phylogenetic trees of the genus based on the mitochondrial locus of NADH dehydrogenase subunit 2 (ND2) gene fragments. The new species distinctly differs from H.fudingensis by differences in its body measurements, vertebral ridge, dorsal black patches, and ventral black patches. Furthermore, the new species and H.fudingensis are geographically isolated by a series of high mountain ranges, including the Wuyishan and Jiufengshan Mountains. The number of Hypselotriton species is now 11.

Sources of stress, coping strategies and associated factors among Vietnamese first-year medical students.

OBJECTIVES: This study aims to examine the sources of stress among first-year medical students; the frequency of their coping strategies; the factors associated with specific stressors and specific coping strategies adopted by the participants. METHODS: We conducted a cross-sectional study with 409 first-year students at the University of Medicine and Pharmacy, Vietnam. The Vietnamese versions of the Higher Education Stress Inventory (V_HESI) and Brief Coping Orientation to Problems Experienced (V_Brief COPE) were validated and were used as measurement instruments for participants' sources of stress and coping strategies frequencies. The survey comprised questions of socioeconomic status, stress-related issues, the six sources of stress (using the V_HESI), and the nine coping strategies (using the V_Brief COPE). RESULTS: Among the six sources of stress, "Worries about future competence/endurance" had the highest mean score (3.02±0.64), while "Mismatch in professional role expectations" had the lowest score (1.60±0.53). "Financial concerns" and "Academic workloads" were also significant sources of stress. Regarding coping strategies, Self-distraction was most frequently adopted by the participants (2.80 ± 0.68). Problem-solving (2.72±0.53) and seeking Social support (2.62±0.70) were also common adaptive strategies. Avoidance (1.87±0.55) and substance-use (1.27±0.55) were the least frequent strategies. Students who experienced acute stress event were more likely to have financial concerns compared to others. Substance use was positively associated with stressors from "Mismatch in professional role expectations", "Non-supportive educational environment", "Having physical issues" and "Having part-time job". Self-blame was more frequent among students with "Worries about future competence/endurance", "Financial concerns", and "Academic workload". Male student tended to adopt humor strategy (ß = 0.19, p = 0.02), while less likely to utilize religious practices (ß = -0.21, p = 0.01). CONCLUSIONS: Two-thirds of the participants reported moderate to high levels of stress. "Worries about future competence/endurance" was the most concerned stressor, followed by "Academic workload", and "Financial concerns". The first-year medical students reported high frequency of utilization "Self-distraction", "Problem-solving" and "Social support" when confronting stress. The findings may help inform the school management to better support students' well-being.

A Cost-Effective Approach to Creating Large Silicone Rubber Molds Using Advanced Rigid Polyurethane Foam.

In practical applications, polyurethane (PU) foam must be rigid to meet the demands of various industries and provide comfort and protection in everyday life. PU foam components are extensively used in structural foam, thermal insulation, decorative panels, packaging, imitation wood, and floral foam, as well as in models and prototypes. Conventional technology for producing PU foam parts often leads to defects such as deformation, short shots, entrapped air, warpage, flash, micro-bubbles, weld lines, and voids. Therefore, the development of rigid PU foam parts has become a crucial research focus in the industry. This study proposes an innovative manufacturing process for producing rigid PU foam parts using silicone rubber molds (SRMs). The deformation of the silicone rubber mold can be predicted based on its wall thickness, following a trend equation with a correlation coefficient of 0.9951. The volume of the PU foam part can also be predicted by the weight of the PU foaming agent, as indicated by a trend equation with a correlation coefficient of 0.9824. The optimal weight ratio of the foaming agent to water, yielding the highest surface hardness, was found to be 5:1. The surface hardness of the PU foam part can also be predicted based on the weight of the water used, according to a proposed prediction equation with a correlation coefficient of 0.7517. The average surface hardness of the fabricated PU foam part has a Shore O hardness value of approximately 75. Foam parts made with 1.5 g of water added to 15 g of a foaming agent have the fewest internal pores, resulting in the densest interior. PU foam parts exhibit excellent mechanical properties when 3 g of water is added to the PU foaming agent, as evidenced by their surface hardness and compressive strength. Using rigid PU foam parts as a backing material in the proposed method can reduce rapid tool production costs by about 62%. Finally, an innovative manufacturing process for creating large SRMs using rigid PU foam parts as backing material is demonstrated.

Effect of cyclosporin A on respiratory viral replication in fully differentiated ex vivo human airway epithelia.

Cyclosporin A (CsA), an immunosuppressive drug used in transplant recipients, inhibits graft rejection by binding to cyclophilins and competitively inhibiting calcineurin. While concerns about respiratory infections in immunosuppressed patients exist, contradictory data emerged during the COVID-19 pandemic, prompting investigations into CsA's impact on viral infections. This study explores CsA's antiviral effects on SARS-CoV-2 Omicron BA.1, Delta variants, and human parainfluenza virus 3 (HPIV3) using an ex vivo model of human airway epithelium (HAE). CsA exhibited a dose-dependent antiviral effect against the SARS-CoV-2 Delta variant, reducing viral load over 10 days. However, no significant impact was observed against SARS-CoV-2 Omicron or HPIV3, indicating a virus-specific effect. At high concentrations, CsA was associated with an increase of IL-8 and a decrease of IFNλ expression in infected and noninfected HAE. This study highlights the complexity of CsA's antiviral mechanisms, more likely involving intricate inflammatory pathways and interactions with specific viral proteins. The research provides novel insights into CsA's effects on respiratory viruses, emphasizing the need for understanding drug-virus interactions in optimizing therapeutic approaches for transplant recipients and advancing knowledge on immunosuppressive treatments' implications on respiratory viral infections. Limitations include the model's inability to assess T lymphocyte activation, suggesting the necessity for further comprehensive studies to decipher the intricate dynamics of immunosuppressive treatments on respiratory viral infections.

Carbon footprint analysis of wastewater treatment processes coupled with sludge in situ reduction.

The goal of this study was to assess the impacts or benefits of sludge in situ reduction (SIR) within wastewater treatment processes with relation to global warming potential in wastewater treatment plants, with a comprehensive consideration of wastewater and sludge treatment. The anaerobic side-stream reactor (ASSR) and the sludge process reduction activated sludge (SPRAS), two typical SIR technologies, were used to compare the carbon footprint analysis results with the conventional anaerobic - anoxic - oxic (AAO) process. Compared to the AAO, the ASSR with a typical sludge reduction efficiency (SRE) of 30 % increased greenhouse gas (GHG) emissions by 1.1 - 1.7 %, while the SPRAS with a SRE of 74 % reduced GHG emissions by 12.3 - 17.6 %. Electricity consumption (0.025 - 0.027 kg CO2-eq/m3), CO2 emissions (0.016 - 0.059 kg CO2-eq/m3), and N2O emissions (0.009 - 0.023 kg CO2-eq/m3) for the removal of secondary substrates released from sludge decay in the SIR processes were the major contributor to the increased GHG emissions from the wastewater treatment system. By lowering sludge production and the organic matter content in the sludge, the SIR processes significantly decreased the carbon footprints associated with sludge treatment and disposal. The threshold SREs of the ASSR for GHG reduction were 27.7 % and 34.6 % for the advanced dewatering - sanitary landfill and conventional dewatering - drying-incinerating routes, respectively. Overall, the SPRAS process could be considered as a cost-effective and sustainable low-carbon SIR technology for wastewater treatment.

First report of albinism for Achalinussheni (Serpentes, Xenodermidae), with extended diagnosis of the species.

Albinism is an uncommon phenomenon and inherited condition in animals characterized by a partial or complete lack of melanin. The family Xenodermidae Gray, 1849, is a group of caenophidian snakes widely distributed in South, East, and Southeast Asia, including five recognized genera and 36 species. However, there are currently no reports of albinism in any species in Xenodermidae. Achalinussheni Ma, Xu, Qi, Wang, Tang, Huang & Jiang, 2023 was first described based on five male specimens from Loudi City and Nanyue District, Hunan Province, China. At the time, there were no descriptions on female individuals. In this study, we report in detail a collected albinistic specimen of A.sheni, which is the first discovery of wild albinism in the family Xenodermidae. We also provide photographs and descriptions of the first three female specimens of A.sheni and extend the diagnosis of this species.

Take-out food enhances the risk of MPs ingestion and obesity, altering the gut microbiome in young adults.

Young people are consuming large amounts of microplastics (MPs) due to the booming development of the take-out industry. To investigate the association between MPs exposure and obesity, 121 volunteers were divided into high MPs exposure (HME) and low MPs exposure (LME) according to the frequency of take-out food consumption. Fecal samples were collected for MPs detection using Raman spectra analysis, and identification of the gut microbiota was based on 16 S rDNA/ITS, while metabolite analysis was performed by LC-MS/MS. High levels of MPs and body mass index (BMI) were observed in the HME group (P < 0.05). Both the multiple linear regression (MLR) model and the binary logistic regression (BLR) (OR: 1.264, 95 % CI: 1.108-1.441, P < 0.001) analysis showed a positive correlation between MPs content and BMI. Microbial community analysis revealed that Veillonella, Alistipes and Dothideomycotes (pathogenic fungi) increased in HME participants, whereas Faecalibacterium and Coprococcus decreased. Meanwhile, analysis of stool metabolites showed that vancomycin resistance, selenocompound metabolism and drug metabolism pathways were enhanced in HME participants. These findings indicate that frequent consumption of take-out food may elevate the intake of microplastics, consequently modifying the gut microbiota and metabolites of young adults, and could represent a potential risk factor for obesity.

Stable zinc anode solid electrolyte interphase via inner Helmholtz plane engineering.

The inner Helmholtz plane and thus derived solid-electrolyte interphase (SEI) are crucial interfacial structure to determine the electrochemical stability of Zn-ion battery (ZIB). In this work, we demonstrate that introducing ß-cyclodextrins (CD) as anion-receptors into Zn(OTf)2 aqueous electrolyte could significantly optimize the Zn anode SEI structure for achieving stable ZIB. Specifically, ß-CD with macrocyclic structure holds appropriate cavity size and charge distribution to encase OTf- anions at the Zn metal surface to form ß-CD@OTf- dominated inner Helmholtz structure. Meanwhile, the electrochemically triggered ß-CD@OTf- decomposition could in situ convert to the organic-inorganic hybrid SEI (ZnF2/ZnCO3/ZnS‒(C-O-C/*CF/*CF3)), which could efficiently hinder the Zn dendrite growth with maintain the proper SEI mechanical strength stability to guarantee the long-term stability. The thus-derived Zn | |Zn pouch cell (21 cm2 size) with ß-CD-containing electrolyte exhibits a cumulative capacity of 6450 mAh-2 cm-2 at conditions of 10 mAh cm-2 high areal capacity. This work gives insights for reaching stable ZIB via electrolyte additive triggered SEI structure regulation.

A new species of the genus Hebius (Squamata, Natricidae) from Yunnan, China.

A new species of the genus Hebius Thompson, 1913 is described from Yingjiang County, Dehong Dai and Jingpo Autonomous Prefecture, Yunnan Province, China, based on molecular and morphological evidence. It can be distinguished from its congeners by the following set of characters: (1) dorsal scale rows 19-17-17, feebly keeled; (2) ventrals 146-151; (3) nasal complete, nostril in the middle of the nasal; (4) supralabials 9, the fourth to sixth in contact with the eye; (5) infralabials 10-11, the first 5 touching the first pair of chin shields; (6) preoculars 2; (7) postoculars 3; (8) temporals 3, arranged in two rows (1+2); (9) maxillary teeth 31, the last 4 slightly enlarged, without diastema; (10) tail comparatively long, TAL/TL ratio 0.334 in the male; (11) dorsolateral series of irregular orange or ochre yellow blotches, extending from the neck to the posterior part of the tail; and (12) venter pale orange, tips of ventrals with subrectangular black blotches. All Hebius specimens were strongly recovered as monophyletic, in which Hebiustaronensis (Smith, 1940) and Hebiusvenningi (Wall, 1910) were monophyletic as sister to the Yingjiang County specimens. According to the p-distance of cytochrome b, the new species differs from its congeners by 9.7-15.4%.

A new record and a novel morph description of Boigastoliczkae (Squamata, Colubridae) from China.

Background: The Asian Cat Snake genus Boiga Fitzinger, 1826 includes 37 species, with high species diversity. Five species of Boiga have been recorded in China including B.multomaculata (Boie, 1827), B.kraepelini (Stejneger, 1902), B.cyanea (Duméril, Bibron & Duméril, 1854), B.guangxiensis (Wen, 1998) and B.siamensis (Nutaphand, 1971). Previously, the validity of the species Boigastoliczkae (Wall, 1909) was controversial. B.stoliczkae was considered in synonymy with B.ochracea. Currently, the taxonomy of B.multomaculata and B.ochracea (Theobald, 1868) was revised so that B.multomaculata and B.ochracea actually represent a single species and B.stoliczkae was recognised as a valid species. B.stoliczkae was previously known to be found in the west from central Nepal through Darjeeling, Sikkim and Bhutan to Arunachal Pradesh and Assam in north-eastern India. New information: One adult female specimen of the Asian Cat Snake was collected from Gyirong County, near the China-Nepal border, Tibet, China during fieldwork on August 2023. We compared morphology and mitochondrial DNA sequence data with all the species of the genus Boiga. Both datasets strongly supported referring the Chinese specimens to B.stoliczkae (Wall, 1909) due to the 21 mid-dorsal scale rows and the uncorrected p-distance (mitochondrial DNA gene cytochrome b) between this specimen and B.stoliczkae which is 1.7%. We further described morphological characters of the Chinese specimen in detail and compared these with the specimens that had been previously described. The dorsal ground colour of the Chinese specimen is dark brown, with a black stripe distributed almost evenly across the tail. This is a novel morph of the species B.stoliczkae. The newly-collected Chinese specimen expands the distribution of the species on the Himalaya range.

Portal Venous and Hepatic Arterial Coefficients Predict Post-Hepatectomy Overall and Recurrence-Free Survival in Patients with Hepatocellular Carcinoma: A Retrospective Study.

Background: The dominant artery blood supply is a characteristic of hepatocellular carcinoma (HCC). However, it is not known whether the blood supply can predict the post-hepatectomy prognosis of patients with HCC. This retrospective study investigated the prognostic value of the portal venous and arterial blood supply estimated on triphasic liver CT (as a portal venous coefficient, PVC, and hepatic arterial coefficient, HAC, respectively) in patients with HCC following hepatectomy. Methods: HCC patients who were tested by triphasic liver CT 2 weeks before hepatectomy and received R0 hepatectomy at the Second Affiliated Hospital, Kunming Medical University between January 1, 2016 and December 31, 2020, were retrospectively screened. Their PVC and HAC, and other variables were analyzed for the prediction of overall survival (OS) and recurrence-free survival (RFS) using the least absolute shrinkage and selection operator and Cox proportional hazard regression models. Results: Four hundred and nineteen patients (53.2 ± 10.6 years of age and 370 men) were evaluated. A shorter OS was independently associated with higher blood albumin and total bilirubin grade [hazard ratio (HR) 2.020, 95% confidence interval (CI) 1.534-2.660], higher Barcelona Clinic Liver Cancer (BCLC) stage (HR 1.514, 95% CI 1.290-1.777), PVC ≤ 0.386 (HR 1.628, 95% CI 1.149-2.305), and HAC > 0.029 (HR 1.969, 95% CI 1.380-2.809). A shorter RFS was independently associated with male (HR 1.652, 95% CI 1.005-2.716), higher serum α-fetoprotein ≥ 400 ng/mL (HR 1.672, 95% CI 1.236-2.263), higher BCLC stage (HR 1.516, 95% CI 1.300-1.768), tumor PVC ≤ 0.386 (HR 1.641, 95% CI 1.198-2.249), and tumor HAC > 0.029 (HR 1.455, 95% CI 1.060-1.997). Conclusion: Tumor PVC or HAC before hepatectomy is valuable for independently predicting postoperative survival of HCC patients.

Molecular Bridging Induced Anti-salting-out Effect Enabling High Ionic Conductive ZnSO4-based Hydrogel for Quasi-solid-state Zinc Ion Batteries.

Hydrogel electrolytes (HEs) hold great promise in tackling severe issues emerging in aqueous zinc-ion batteries, but the prevalent salting-out effect of kosmotropic salt causes low ionic conductivity and electrochemical instability. Herein, a subtle molecular bridging strategy is proposed to enhance the compatibility between PVA and ZnSO4 from the perspective of hydrogen-bonding microenvironment re-construction. By introducing urea containing both an H-bond acceptor and donor, the broken H-bonds between PVA and H2O, initiated by the SO42--driven H2O polarization, could be re-united via intense intermolecular hydrogen bonds, thus leading to greatly increased carrying capacity of ZnSO4. The urea-modified PVA-ZnSO4 HEs featuring a high ionic conductivity up to 31.2 mS cm-1 successfully solves the sluggish ionic transport dilemma at the solid-solid interface. Moreover, an organic solid-electrolyte-interphase can be derived from the in-situ electro-polymerization of urea to prohibit H2O-involved side reactions, thereby prominently improving the reversibility of Zn chemistry. Consequently, Zn anodes witness an impressive lifespan extension from 50 h to 2200 h at 0.1 mA cm-2 while the Zn-I2 full battery maintains a remarkable Coulombic efficiency (>99.7%) even after 8000 cycles. The anti-salting-out strategy proposed in this work provides an insightful concept for addressing the phase separation issue of functional HEs.

Comparative genomics sheds new light on the convergent evolution of infrared vision in snakes.

Infrared vision is a highly specialized sensory system that evolved independently in three clades of snakes. Apparently, convergent evolution occurred in the transient receptor potential ankyrin 1 (TRPA1) proteins of infrared-sensing snakes. However, this gene can only explain how infrared signals are received, and not the transduction and processing of those signals. We sequenced the genome of Xenopeltis unicolor, a key outgroup species of pythons, and performed a genome-wide analysis of convergence between two clades of infrared-sensing snakes. Our results revealed pervasive molecular adaptation in pathways associated with neural development and other functions, with parallel selection on loci associated with trigeminal nerve structural organization. In addition, we found evidence of convergent amino acid substitutions in a set of genes, including TRPA1 and TRPM2. The analysis also identified convergent accelerated evolution in non-coding elements near 12 genes involved in facial nerve structural organization and optic nerve development. Thus, convergent evolution occurred across multiple dimensions of infrared vision in vipers and pythons, as well as amino acid substitutions, non-coding elements, genes and functions. These changes enabled independent groups of snakes to develop and use infrared vision.

High-resolution and highly-multiplexed option for fiber-fed spectrograph of the wide field MUltiplexed Survey Telescope (MUST).

In recent decades, rapid advances in astronomical imaging campaigns have generated an urgent need for detailed spectroscopic surveys with increased speed and efficiency. The 6.5 m MUltiplexed Survey Telescope (MUST) aims to address these current demands. The performance of the multi-object fiber-fed spectrograph (MOFS) plays a critical role for spectroscopic survey telescopes, directly influencing the realization of scientific aims. In this paper, we demonstrate a high-resolution and highly-multiplexed option for MOFS of MUST. The system is believed to be first to apply a 92 mm × 92 mm large-size detector in a Schmidt-like camera and reduces the average central obscuration to 14%. Thanks to the F/1.25 camera design with excellent image quality, the spectrograph achieves up to 800 150µm-large-core optical fibers integration. It can obtain the broadband spectral information (395 nm-435 nm, 520 nm-570 nm, 610 nm-680 nm) of 800 objects with a high resolution of >16,000 within one exposure. The spectrograph theory, design method, and final system scheme of the MOFS can offer good reference and guidance for the spectrograph design in the spectroscopic survey.

Optimized optical system with a 1.65 m wide-field corrector for the 6.5 m high-performance MUltiplexed Survey Telescope.

The development of modern large-scale spectroscopic survey telescopes responds to the urgent demand for spectral information in astronomical research. Tsinghua University has previously proposed a 6.5 m MUltiplexed Survey Telescope consisting of a Ritchey-Chretien configuration and a 1.8 m multi-element wide-field corrector, achieving excellent performance and world-leading survey efficiency. However, an optimized 1.65 m multi-element corrector with five lenses is proposed to overcome the constraints on glass uniformity and verification in fabrication of the previous corrector design. It maintains outstanding image quality, with the 80% enclosed energy diameter not more than 0.559 arcsec within 3° FoV over up to a 55° zenith angle. The optimized optical system does not revise the working mode of the ADC or the curvature of the primary mirror while ensuring the reasonability and accuracy of manufacturing of large corrector elements. It provides a more feasible reference optical design for the MUltiplexed Survey Telescope in subsequent iterations and communications with manufacturers.