Enhanced TiO2/SiCx Active Layer Formed In Situ on Coal Gangue/Ti3C2 MXene Electrocatalyst as Catalytic Integrated Units for Efficient Li-O2 Batteries.

The pursuit of efficient cathode catalysts to improve cycle stability at ultra-high rates plays an important role in boosting the practical utilization of Li-O2 batteries. Featured as industrial solid waste, coal gangue with rich electrochemical active components could be a promising candidate for electrocatalysts. Here, a coal gangue/Ti3C2 MXene hybrid with a TiO2/SiCx active layer is synthesized and applied as a cathode catalyst in Li-O2 batteries. The coal gangue/Ti3C2 MXene hybrid has a tailored amorphous/crystalline heterostructure, enhanced active TiO2 termination, and a stable SiCx protective layer; thereby, it achieved an excellent rate stability. The Li-O2 battery, assembled with a coal gangue/Ti3C2 MXene cathode catalyst, was found to obtain a competitive full discharge capacity of 3959 mAh g-1 and a considerable long-term endurance of 180 h (up to 175 cycles), with a stable voltage polarization of 1.72 V at 2500 mA g-1. Comprehensive characterization measurements (SEM, TEM, XPS, etc.) were applied; an in-depth analysis was conducted to reveal the critical role of TiO2/SiCX active units in regulating the micro-chemical constitution and the enhanced synergistic effect between coal gangue and Ti3C2 MXene. This work could provide considerable insights into the rational design of catalysts derived from solid waste gangue for high-rate Li-O2 batteries.

Exposure frequency and radiation dose from CT examinations in Huaian.

This study quantified the exposure frequency and established the local diagnostic reference levels (DRLs) for the most common computed tomography (CT) examinations. A combined method census and sampling survey was used to quantify both frequency and radiation dose of CT examinations. Data were acquired through Picture Archiving and Communication System (PACS) or Radiology Information System (RIS). The annual frequency of CT examinations was 239.8 per 1000 inhabitants. The P75 of volume CT dose index (CTDIvol) to adult patients from CT scanning for head, chest, abdomen and lumbar spine examinations were 63.0, 12.4, 20.0 and 24.0 mGy, respectively. The P75 of dose-length product were 858.6, 416.0, 620.7 and 559.2 mGy·cm, respectively. This dose audit of CT practice can act as a starting point for establishing Huaian local DRLs and could be a reference for dose optimisation in China. This study compared DRLs in different countries and analysed some reasons for the rapid growth of CT examination frequency in Huaian.

Insight into the Micro Evolution of Backfill Paste Prepared with Modified Gangue as Supplementary Cementitious Material: Dissolution and Hydration Mechanisms.

Gangue-based backfill cementitious materials (BCM) are widely applied due to their low CO2 footprint, while the application is restricted by gangue's low reactivity. In this study, dry chemical modification was developed to modify the gangue, and multiple characterized approaches were used to characterize the dissolution property, mineral composition, and particle size distribution of modified gangue (MCG), as well as the compressive strength and microstructure of BCM. The findings show that the residue weight of MCG stabilized at 2 wt.% of formic acid, and the modification reduces the kaolinite and calcite, resulting in smaller particles. Additionally, the three days compressive strength of the BCM made with MCG was improved from 0.3 MPa to 0.6 MPa. Attributed to the increased reactivity of MCG, it was found that the dissolution weight increased by 2.13%. This study offers a novel method for activating gangue and a new kind of MCG-prepared BCM, which makes a significant contribution towards achieving the UN Sustainable Development Goals.

Experimental Study on Performance Optimization of Grouting Backfill Material Based on Mechanically Ground Coal Gangue Utilizing Urea and Quicklime.

Previously conducted studies have established that grouting backfill in mining-induced overburden bed separation and mined-out areas with broken rocks provides an efficient strategy to control strata movement and surface subsidence caused by underground mining. Grouting backfill materials (GBMs) based on coal gangue (CG) are highly desirable in coal mining for accessibility to abundant CG and urgent demand for CG disposal. However, CG is generally employed as coarse aggregate due to rather rigid and inert properties, limiting its application in GBMs. Herein, to reduce reliance on fine aggregates, such as fly ash and clay, cemented GBM formulations using ground CG powder as a dominant component were proposed. Urea and quicklime were utilized as additives to optimize slurry transportability and compressive strength. Besides typical grinding without additives, CG powder was also prepared via grinding with urea, intending to enhance the hydrogen bonding (HB) interaction between urea and minerals contained in CG. The effect of grinding time and urea on CG particle size and phase composition was investigated. Then, the dependence of slurry transportability and compressive strength on grinding time, solid concentration, urea, and quicklime dosage were revealed. It has been experimentally proved that grinding for 30~90 min significantly decreased CG particle size and even induced crystal deformation of dolomite and kaolinite. For GBMs, urea improved slurry flowability, possibly caused by decreased water absorption on the CG surface and the release of water encapsulated in hydrated cement particles. Moreover, quicklime strengthened GBM bodies, which could be explained by an accelerated pozzolanic reaction between CG powder and additional CH supplied by quicklime hydration. G60U3-based GBM-B2 with 5% quicklime provided a stable and smooth slurry with a bleeding rate of 1.25%, a slump flow of 205 mm, and a hardened body with a seven-day UCS of 1.51 MPa.