Radiation Dose to the Eye Lens Through Radiological Imaging Procedures at the Surgical Workplace During Trauma Surgery.

Background: Due to the drastic reduction of the eye lens dose limit from 150 mSv per year to 20 mSv per year since 2018, the prospective investigation of the estimated dose of the eye lens by radiological imaging procedures at the surgical site during trauma surgery in the daily work process was carried out. This was also necessary because, as experience shows, with changes in surgical techniques, there are also changes in the use of radiological procedures, and thus an up-to-date inventory can provide valuable information for the assessment of occupationally induced radiation exposure of surgical personnel under the current conditions. Methods: The eye lens radiation exposure was measured over three months for five trauma surgeons, four hand surgeons and four surgical assistants with personalized LPS-TLD-TD 07 partial body dosimeters Hp (0.07). A reference dosimeter was deposited at the surgery changing room. The dosimeters were sent to the LPS (Landesanstalt für Personendosimetrie und Strahlenschutzausbildung) measuring institute (National Institute for Personal Dosimetry and Radiation Protection Training, Berlin) for evaluation after 3 months. The duration of the operation, occupation (assistant, surgeon, etc.), type of surgery (procedure, diagnosis), designation of the X-ray unit, total duration of radiation exposure per operation and dose area product per operation were recorded. Results: Both the evaluation of the dosimeters by the trauma surgeons and the evaluation of the dosimeters by the hand surgeons and the surgical assistants revealed no significant radiation exposure of the eye lens in comparison to the respective measured reference dosimeters. Conclusions: Despite the drastic reduction of the eye lens dose limit from 150 mSv per year to 20 mSv per year, the limit for orthopedic, trauma and hand surgery operations is well below the limit in this setting.

Low-pressure micro-mechanical re-adaptation device sustainably and effectively improves locomotor recovery from complete spinal cord injury.

Traumatic spinal cord injuries result in impairment or even complete loss of motor, sensory and autonomic functions. Recovery after complete spinal cord injury is very limited even in animal models receiving elaborate combinatorial treatments. Recently, we described an implantable microsystem (microconnector) for low-pressure re-adaption of severed spinal stumps in rat. Here we investigate the long-term structural and functional outcome following microconnector implantation after complete spinal cord transection. Re-adaptation of spinal stumps supports formation of a tissue bridge, glial and vascular cell invasion, motor axon regeneration and myelination, resulting in partial recovery of motor-evoked potentials and a thus far unmet improvement of locomotor behaviour. The recovery lasts for at least 5 months. Despite a late partial decline, motor recovery remains significantly superior to controls. Our findings demonstrate that microsystem technology can foster long-lasting functional improvement after complete spinal injury, providing a new and effective tool for combinatorial therapies.

Bone plate-screw constructs for osteosynthesis - recommendations for standardized mechanical torsion and bending tests.

This paper follows up on a recent systematic review of test methods and parameters for biomechanical testing of bone plates and it is the first study that contains recommendations for standardized mechanical testing of bone plate-screw constructs for osteosynthesis. Following the testing philosophy of ASTM F382 and ISO 9585, we have developed standardized quasi-static and dynamic testing methods for straight linear and anatomically shaped plates, including locked type and conventional systems. The test specification comprises torsion and bending tests along the implant axis and therefore modifies and extends the methods proposed by ASTM F382. We present specific test setups in order to determine product-specific characteristics of the mechanical construct, consisting of the bone plate with corresponding screws (such as construct stiffness, yield strength, ultimate strength and fatigue properties) under the condition that it is rigidly fixed to "healthy bone". We also address specific testing requirements that are important for the purpose of standardization, such as the positioning of the construct for testing or the number of screws in the diaphysis and metaphysis. Finally, we define the outcome parameters and associated failure criteria related to quasi-static and dynamic testing for comparative purposes. This paper does not intend to replace biomechanical testing of those devices under physiological loading conditions.

Biomechanical comparison of a multidirectional locking plate and conventional plates for the osteosynthesis of mandibular angle fractures-A preliminary study.

PURPOSE: The objective of surgical fracture management is to reduce and fixate fractures accurately and rapidly. Two osteosynthesis plates are usually used in the treatment of mandibular angle fractures to enhance torsional stiffness. We conducted biomechanical tests under static and cyclic loading to assess whether a single locking plate is as efficacious as two conventional plates in the osteosynthesis of mandibular angle fractures. MATERIALS AND METHODS: Fracture gaps were created in synthetic mandible replicas. After pretests, the stiffness of a single locking plate and different types of non-locking, two-plate systems was assessed and compared under static and cyclic loading. The plates were subjected to a maximum static load of 750 N and underwent cyclic loading at a constant force of 400 N during a maximum of 500,000 cycles. RESULTS: No plastic deformation occurred in the static tests. Both types of osteosynthesis showed high static stability. The locking plate was significantly stiffer than the non-locking plates (p = 0.0079). Cyclic loading tests did not reveal any significant differences. CONCLUSION: Within the limitations of this preliminary study, a single locking miniplate appears to be as efficacious in biomechanical tests as non-locking, two-plate systems for the management of mandibular angle fractures.

Bone plates for osteosynthesis - a systematic review of test methods and parameters for biomechanical testing.

Bone plates for osteosynthesis are subject to biomechanical testing for safety and regulatory purposes. International standards applicable for those devices are designed for bone plates used in the surgical fixation of the skeletal system but not necessarily for all device variants available. We intend to summarize the test methods and parameters presented in the literature to evaluate bone plates in a clinical environment, especially for modern anatomically shaped implants. We conducted a systematic review on published biomechanical studies for lower and upper extremities (clavicle, humerus, ulna, radius, metacarpal, femur, tibia, fibula, metatarsal). The search process led to the identification of 159 relevant articles containing 330 individual tests, which were analyzed concerning various test criteria including test methods and parameters per bone segment for static and dynamic loading tests, as well as number of cycles, chosen bone model and outcome variables. The biomechanical literature for bone plates is diverse, inconsistent and heterogeneous. Test methods are not commonly applied per bone plate location and test parameters are not uniformly specified and displayed. They vary in particular for bending and torsion tests as well as for the number of loading cycles for dynamic testing. Outcome variables are not commonly applied nor defined. Consequently this paper is the first in a planned chronological series of three to identify the need (this publication), to develop a systematic procedural approach (2. publication) and to apply the process exemplary on a bone plate sample (3. publication).

Air Medical Evacuations From the German North Sea Wind Farm Bard Offshore 1: Traumatic Injuries, Acute Diseases, and Rescue Process Times (2011-2013).

OBJECTIVE: Our purpose was 2-fold: 1) to show emergency-related traumatic injury and acute disease patterns and 2) to evaluate air rescue process times in a remotely located German offshore wind farm. Optimally, this will support methodologies to reduce offshore help time (time from the incoming emergency call until offshore arrival of the helicopter). METHODS: The type and severity of traumatic injuries and acute diseases were retrospectively analyzed for 39 air medevacs from August 2011 to December 2013, and the process times of air rescue missions were evaluated in detail. RESULTS: Forty-nine percent of the medevacs were related to traumatic injuries, whereas 41% were associated with acute diseases and 10% remained unclear. Cardiovascular and gastrointestinal disorders accounted for 90% of internal medical cases. About 69% of the trauma was related to contusions, lacerations, and cuts. The main body regions injured were limbs (∼59%) and head (∼32%). The total rescue time until arrival at the destination facility averaged 175.3 minutes (standard deviation = 54.4 minutes). The mean helicopter offshore arrival time was 106.9 minutes (standard deviation = 57.4 minutes) after the incoming emergency call. In 64% of the medevacs, the helicopter arrived on scene within a help time of 90 minutes. CONCLUSION: A reduction of help time (≤ 60 minutes) for time-critical severe trauma and acute diseases may be anticipated through rapid and focused medical and logistic decision-making processes by the onshore dispatch center combined with professional, qualified, and well-trained flight and rescue personnel.

Accuracy of a hexapod parallel robot kinematics based external fixator.

BACKGROUND: Different hexapod-based external fixators are increasingly used to treat bone deformities and fractures. Accuracy has not been measured sufficiently for all models. METHODS: An infrared tracking system was applied to measure positioning maneuvers with a motorized Precision Hexapod® fixator, detecting three-dimensional positions of reflective balls mounted in an L-arrangement on the fixator, simulating bone directions. By omitting one dimension of the coordinates, projections were simulated as if measured on standard radiographs. Accuracy was calculated as the absolute difference between targeted and measured positioning values. RESULTS: In 149 positioning maneuvers, the median values for positioning accuracy of translations and rotations (torsions/angulations) were below 0.3 mm and 0.2° with quartiles ranging from -0.5 mm to 0.5 mm and -1.0° to 0.9°, respectively. CONCLUSIONS: The experimental setup was found to be precise and reliable. It can be applied to compare different hexapod-based fixators. Accuracy of the investigated hexapod system was high.

Surgical therapy of extensive knee joint empyema: mid-term results after two-stage versus one-stage procedures.

PURPOSE: Untreated knee joint empyema leads to rapid destruction of the joint and, thus far, has proven challenging to treat. This study presents data obtained after one- versus two-stage surgical approaches. Specifically, clinical outcome, complication rate, re-infection rate, duration of operation, and hospital stay are reported. METHODS: Between 2006 and 2010, 67 patients with extensive knee joint empyema underwent surgical therapy. Patients underwent either a two-stage surgical approach with open joint treatment for 7-10 days or a one-stage procedure with primary closure of the knee joint after radical debridement. RESULTS: The two-stage procedure was performed on 36 patients, whereas the one-stage procedure was performed on 31 patients. Infection duration prior to the index procedure ranged from 3 days to 55 months (two-stage: ~5 months, one-stage: ~2.4 months). The groups did not differ significantly in demographic group characteristics. Hospital stay and duration of operation were significantly (p < 0.01) reduced in the one-stage group compared to the two-stage group (31.1 ± 10.6 vs. 23.4 ± 14.4 days and 105 ± 32 vs. 68 ± 18 min, respectively). Functional outcome improved in both groups from the pre- to post-operative period, but did not differ significantly between groups. CONCLUSION: The one-stage open surgical approach produced similar results to the two-stage approach in the treatment of extensive knee joint empyemas. However, by waiving the open joint treatment concept, duration of hospital stay and operation time could be significantly reduced. LEVEL OF EVIDENCE: III.

Influence of cooling on curing temperature distribution during cementing of modular cobalt-chromium and monoblock polyethylene acetabular cups.

Total hip replacements for older patients are usually cemented to ensure high postoperative primary stability. Curing temperatures vary with implant material and cement thickness (30°C to 70°C), whereas limits for the initiation of thermal bone damage are reported at 45°C to 55°C. Thus, optimizing surgical treatment and the implant material are possible approaches to lower the temperature. The aim of this study was to investigate the influence of water cooling on the temperature magnitude at the acetabulum cement interface during curing of a modular cobalt-chromium cup and a monoblock polyethylene acetabular cup. The curing temperature was measured for SAWBONE and human acetabuli at the cement-bone interface using thermocouples. Peak temperature for the uncooled condition reached 70°C for both cup materials but was reduced to below 50°C in the cooled condition for the cobalt-chromium cup (P = .027). Cooling is an effective method to reduce curing temperature with metal implants, thereby avoiding the risk of thermal bone damage.

Biomechanical testing of a new plate system for the distal humerus compared to two well-established implants.

PURPOSE: A biomechanical study was performed to test the hypothesis that a new anatomically preformed, thinner, soft-tissue protecting plate system for distal humeral fractures (Tifix®-hybridplate [HP]) would show comparable results in the quasi-static and dynamic testings compared to two conventional implants: The 3.5-mm reconstruction plate (RP) providing primary stability with normal bone mineral density (BMD), and a multidirectional locking plate (Tifix(®)-plate [P]) which can be used with poor bone quality. METHODS: The Tifix(®)-HP was developed by the working group. The biomechanical testing was performed on a C2-fracture-model in 24 synthetic humeri. Three groups, each with eight bone-implant-constructs, were analysed in quasi-static and dynamic tests. RESULTS: The quasi-static measurements showed that under extension loading both locking plates (Tifix(®)-P, Tifix(®)-HP) were significantly stiffer than the reconstruction plate, and that the Tifix(®)-HP had a significantly lower stiffness than the two other implants under flexion loading. In the dynamic tests the Tifix(®)-P allowed significantly less fracture motion compared to the Tifix(®)-HP and the reconstruction plate. In an osteopaenic bone model locking plates failed only under much higher dynamic force than the reconstruction plate. The reconstruction plate and the Tifix(®)-P always failed through screw loosening, whereas the newly developed Tifix(®)-HP showed screw loosening in only one third of cases. CONCLUSION: The hypothesis that the newly designed plate system showed comparable results in the quasi-static and dynamic tests compared to the conventional implants with a significantly lower implant volume and thickness was confirmed.

Anterior cruciate ligament reconstruction using bone plug-free quadriceps tendon autograft: intermediate-term clinical outcome after 24-36 months.

INTRODUCTION: Although known as a possible graft option for decades, quadriceps tendon grafts have often been termed a second-line graft option. We report a consecutive case series using this method as the primary treatment line. The rationale for this study was to evaluate the midterm results of this method in a prospective and consecutive case series. The primary study question was to determine the clinical results 24-36 months after primary anterior cruciate ligament (ACL) reconstruction using a bone plug-free quadriceps tendon autograft fixed with bioabsorbable cross-pins. MATERIALS AND METHODS: The study population included 55 patients, of whom 24 were female (43.6%). The mean age at the index procedure was 31.7 years (15-58 years). All patients received an ACL construction using a bone block-free quadriceps tendon graft fixed with resorbable cross-pins. The postoperative regimen included partial weight-bearing for 3 weeks and flexion limited to 90° for six weeks; an orthosis was not used. The mean follow-up duration was 29.5 months (24.3-38.5 months) after the index procedure. The International Knee Documentation Committee (IKDC) subjective score and examination form was assessed, as well as the Lysholm and Gillquist score and the Tegner activity index. The Rolimeter arthrometer was used to assess the anterior laxity of the knee. RESULTS: Graft harvesting was possible in all cases; a bony extension was never required. On average, graft length was measured at 8.8 cm (7.5-10 cm). The mean IKDC subjective score at follow-up was 80.44 points (55.17-100 points, standard deviation [SD] 12.05). The mean preinjury Tegner activity index was 4.98 (2-7) compared to a mean value of 4.16 (2-7, SD 0.8) at follow-up. There was a mean loss of 0.82 index points. The average Lysholm and Gillquist score was 89 points (65-100, SD 17.7). Of the results, 89.1% were in the good or very good groups; in one case (1.8%), the result was poor, while the rest were fair. CONCLUSION: ACL reconstruction using a bone plug-free quadriceps tendon autograft achieved satisfactory results in a midterm review.

Multifragmentary tibial pilon fractures: midterm results after osteosynthesis with external fixation and multiple lag screws.

Osteosynthesis of intraarticular tibial pilon fractures is preferably achieved using locking plates via a minimally invasive technique. If combined with severe soft tissue damage there is a high risk of wound-healing deficits after plate osteosynthesis. Thus our aim was to find an alternative method of treatment for those cases with combined soft tissue injuries.We report on five cases with comminuted fractures of the joint surface combined with critical soft tissue condition that were treated with lag screws and external fixation (AO) applied across the ankle joint. All five patients were followed up, undergoing clinical and radiological examination.Using this approach we achieved fracture healing of comminuted fractures without further complications. Clinical follow-up after an average of 55.6 (36-75) months revealed a mean AOFAS score of 81 (62-100).We therefore propose combined treatment using lag screws with external fixation as a practical treatment option for those fractures for which lag screws combined with a locking plate are not feasible or when there is a high risk of wound-healing deficits due to severe soft tissue damage.

Surgical therapy of hip-joint empyema. Is the Girdlestone arthroplasty still up to date?

PURPOSE: Hip-joint empyema is a severe local infection that can cause general illness and, in the worst-case scenario, death by septic complications. For severe hip-joint infections, the Girdlestone arthroplasty has been an established treatment option for many decades. We describe functional midterm results after treatment of haematological and postoperative hip-joint infections. METHODS: From 2000 to 2010, 24 patients underwent surgical treatment for 27 hip-joint empyemas. The surgical procedures included radical debridement, implantation of local antibiotic beads and soft tissue management. Besides clinical, laboratory and imaging parameters, we analysed the Harris hip score (HHS). RESULTS: Twenty-three patients (26 hips) were followed up after a mean of 30 (3.1-126.8) months. The study group consists of 12 men and 11 women, with an average height of 1.71 m, weight of 84.7 kg and body mass index (BMI) of 28.6 kg/m(2). Hip-joint empyema was due to haematological septic spread in eight patients, surgery related in 12 hips and other causes in six cases. One patient died due to septic complications during the hospital stay. Intraoperative bacterial culture was positive in 50%, with Staphylococcus aureus as the most common organism (n = 11). Average hospital stay was 35 days. HHS significantly improved from 18.2 preoperatively to 47.8 at follow-up. Functional results were mainly poor, but pain relief increased significantly. The infection control rate was 96% with four (15%) complications. CONCLUSION: Resection arthroplasty by Girdlestone is able to control infection in most cases with an acceptable complication rate but poor functional results. In conclusion, the Girdlestone arthroplasty still is an essential surgical strategy for treating hip-joint empyema in cases in which functional outcome is of lesser priority.

Treatment of posttraumatic sternal non-union with a locked sternum-osteosynthesis plate (TiFix).

Only a minority of sternal fractures require osteosynthesis. Unstable non-union of the sternum is a very disabling condition which often requires treatment. The method most often used is tension-wiring. Due to loosening of the tensile strength or wire cut-out, this method often fails. We report the results of locked plate osteosynthesis of sternal non-union and displaced fractures. Over a five-year period, 12 patients have been treated using this method in a multicentre trial. Mean age at trauma was 32.8 years, the implant used in all cases was an 8-hole titanium plate, the fixation of the screws is based on the principles of angular stable fixation.In all cases the index procedure was possible, in all cases there was bony healing at follow-up examination.Multidirectional locked plating offers a reliable method for the successful treatment of sternal nonunion and displaced fractures.

Polyaxial Locked Implants in the Treatment of Type Vancouver B1 Periprosthetic Fractures of the Femur: Retrospective Clinical Examination in 58 Cases with Review of the Literature.

We concluded a retrospective study of the outcomes of a consecutive series of Vancouver B1 and C femoral injuries using two specific locked implants. The study center is a dedicated trauma hospital with a large catchment area. Over a five-year period we treated 58 patients with a periprosthetic fracture of the femur with an angular stable plate, defined as the index procedure. The mean age at the index procedure was 72.4 years; 40 patients were female (69%). In 32 cases (55.2%) we saw a hip endoprosthesis, in 21 cases (36.2%) a knee endoprosthesis, and in five cases both (8.6%). Outcome measures were intra- and postoperative complications, bony union, degree of mobility and social status with comparison to the preoperative status, Barthel index, and timed ''up and go'' test. Union occurred in 56 cases (96.5%) after the index procedure. Three patients were bedridden before the injury; the remainder regained full weight-bearing status. The mean duration until full weight-bearing status in these patients was 8.6 weeks (4-13). Early implant failure with proximal dislocation of the screws occurred in two cases (3.5% revision rate). At follow up, 78% had maintained the same social status as before the injury. Fifty-two patients (89%) had regained their previous level of mobility. The mean Barthel index was 85 points (70-100) out of a possible 100, and improved from a mean of 35 points at the start of rehabilitation. It decreased on average by ten points compared to the preoperative status. The mean ''up and go'' time was measured as 21.4 s. In conclusion, polyaxial plates can achieve excellent surgical results. On the other hand, patients with this type of injury exhibit a clear deterioration in their social status, especially regarding lower limb motor function and self-independence.

Is the Wave Plate Still a Salvage Procedure for Femoral Non-union? Results of 75 Cases Treated with a Locked Wave Plate.

OBJECTIVE: To analyse the results of the treatment of aseptic femoral non-unions using a singular locked implant. DESIGN: Consecutive case series. SETTING: A level-1 trauma center with a high number of specialist referrals. PATIENTS: The study is based on a consecutive series of patients with prospective data evaluation. From 1993 to 2003, 75 patients were treated with a wave plate. All patients had persistent non-union of the femoral shaft without clinical or laboratory signs of infection and previous unsuccessful attempts to treat the non-union. INTERVENTION: The method of treatment was standardized and included a lateral approach, cancellous bone hip grafting, osteosynthesis with a wave-shaped plate (PPF) and polyaxial locking screws as well as the application of a gentamicin-PMMA chain. MAIN OUTCOME MEASUREMENTS: Time to achieve union, rate of implant failure and number of remaining nonunions after treatment. A total of 75 patients had full follow-up and were included in the study. RESULTS: The union of the fracture was found in 64 patients after the initial procedure. In eight cases a second procedure was performed to achieve union in the form of a second bone graft because of a delay in callus formation. The mean time to union was 7.3 months with a range from 3 to 19 months. The implant failed in three cases accounting for 4% of the total. CONCLUSION: The locked wave plate offers a further reliable treatment for complex aseptic femoral non-unions.

Deltoid muscular flap transfer for the treatment of irreparable rotator cuff tears.

The purpose of this study was to evaluate the outcome of deltoid muscle flap transfer for the treatment of irreparable rotator cuff tears. In a retrospective study 20 consecutive patients were evaluated. The index procedure took place between 2000 and 2003. Fifteen patients were male, mean age was 62 years. Inclusion criterion was a rotator cuff defect Bateman grade IV. Exclusion criteria were smaller defects, shoulder instability and fractures of the injured shoulder. An open reconstruction with acromioplasty and a pedicled delta flap was performed. Follow up period was mean 42 months. Follow-up included clinical examination, Magnetic Resonance Imaging (MRI) and the Constant and Simple (CS) shoulder tests. According to the Constant shoulder test the results were good in 13 patients, fair in 5 and unsatisfactory in 2. The pre-operative Constant Score improved from mean 25.7 points (±5.3) to 72.3 (±7.8) at follow-up. The mean values for the subcategories of CS increased significantly from 3.9 to 14.4 points for pain and from 4.2 to 15.9 points for activities daily routine (p<0.05). The change in range of motion and strength were not significant (p>0.05). Results of the Simple Shoulder Test showed a significant increase of the mean values from pre-operative 4.3 to 14.7 points post-operatively. MRI showed a subacromial covering of the defect in all cases, all flaps where intact on MRI but always the flap showed marked fatty degeneration. In conclusion, the delta flap is a simple method for the repair of large defects of the rotator cuff leading to satisfying medium results.

Unstable Cervical Spinal Injury in Children - Case Report and Review of the Literature.

Large studies about the management of pediatric patients with unstable flexion-distraction injuries of the midcervical spine are rare. We present the case of a 12-year-old girl who sustained a cervical spinal injury with unilateral facet dislocation and discuss details and problems of diagnostic procedures and treatment in the light of the recent literature. The management and pitfalls of a unilateral facet dislocation in a child are summarized. After initial reposition, a multisegmental instability with neurology developed. Although distraction-flexion cervical spine injuries are common in adults and often occur with concomitant neurological sequelae, they also can occur in the pediatric population. In conclusion, an MRI seems advisable. A treatment of postoperative malalignment with reposition via a halo-fixator cannot be recommended. Repositioning is possible but was lost when the fixator was removed. Comparing the historic and recent literature there is only weak evidence overall, nevertheless a ventral fusion seems to be the treatment option of choice.

Results of total hip replacement using the Robodoc surgical assistant system: clinical outcome and evaluation of complications for 97 procedures.

BACKGROUND: A computerized robotic surgical system was developed from 1986 by the Thomas J. Watson Research Center. In 1992 the system unit Orthodoc and the milling robot Robodoc were first used on humans. We present the results achieved with Robodoc-assisted total hip arthroplasty in 97 hips. METHODS: Between 1997 and 2002, 143 total hip replacements (128 patients) were performed using the Robodoc system. This is a consecutive series. Complete follow-up was possible in 97 hips at a mean follow-up period of 3.8 years. RESULTS: Technical complications directly related to the robotic device occurred in nine cases (9.3%). The pre-operative Merle d'Aubigne score was determined at 8.1 points compared to a post-operative mean score of 16.2. There was no sign of femoral stem loosening on radiographs. CONCLUSIONS: Robotic-assisted total hip arthroplasty with the Orthodoc/ Robodoc system achieves equal results as compared to a manual technique. However, there was a high number of technical complications directly or indirectly related to the robot.

Septic arthritis of the knee after anterior cruciate ligament surgery: a stage-adapted treatment regimen.

BACKGROUND: Septic arthritis is a rare complication after anterior cruciate ligament surgery. All case series reported so far have been retrospective, and case numbers of septic arthritis have ranged from 4 to 11. HYPOTHESIS: A stage-adapted treatment regimen for septic arthritis after anterior cruciate ligament surgery can provide reliable results. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: From June 1993 to May 2003, 24 patients met the inclusion criteria for this study. The average age at trauma was 32.5 years. Treatment protocol was based on the grade of infection. Options included transarthroscopic treatment for Gaechter grades 1 and 2 infections or medial and lateral arthrotomy for grades 3 and 4 infections. Graft retention was decided based on clinical findings. The setting was a specialized trauma hospital. Follow-up included International Knee Documentation Committee forms, radiographs, and the Tegner and Lysholm scores at a mean of 66 months (range, 11-142) after treatment. RESULTS: In all cases, treatment of infection was successful; overall, a mean of 2.2 operations were required. In 7 cases, it was possible to salvage the graft. The Tegner activity level before the knee injury was 6.1 points. At follow-up, the average score was 3.8 points. The postoperative subjective International Knee Documentation Committee score averaged 64. The mean Lysholm score was 65.6. On clinical examination, a mean extension deficit of 3 degrees and a mean maximum flexion of 120 degrees were found. In the single-legged hop test, a mean capacity of 63% compared with the uninjured side was measured. CONCLUSION: The described treatment regimen gives reliable results for this complication. There were no recurrences of septic arthritis or bone infection. Early infection can be managed arthroscopically with satisfactory results regarding the treatment of infection. In advanced or chronic infection, a more radical approach seems favorable. Results in these cases are overall only fair compared with patients with an uncomplicated anterior cruciate ligament reconstruction.