ABSTRACT
Mass-deployable implementations for quantum communication require compact, reliable, and low-cost hardware solutions for photon generation, control and analysis. We present a fiber-pigtailed hybrid photonic circuit comprising nonlinear waveguides for photon-pair generation and a polymer interposer reaching 68 dB of pump suppression and photon separation based on a polarizing beam splitter with > 25 dB polarization extinction ratio. The optical stability of the hybrid assembly enhances the quality of the entanglement, and the efficient background suppression and photon routing further reduce accidental coincidences. We thus achieve a 96 - 8 + 3 % concurrence and a 96 - 5 + 2 % fidelity to a Bell state. The generated telecom-wavelength, time-bin entangled photon pairs are ideally suited for distributing Bell pairs over fiber networks with low dispersion.
ABSTRACT
Atomic monolayers on semiconductor surfaces represent an emerging class of functional quantum materials in the two-dimensional limit - ranging from superconductors and Mott insulators to ferroelectrics and quantum spin Hall insulators. Indenene, a triangular monolayer of indium with a gap of ~ 120 meV is a quantum spin Hall insulator whose micron-scale epitaxial growth on SiC(0001) makes it technologically relevant. However, its suitability for room-temperature spintronics is challenged by the instability of its topological character in air. It is imperative to develop a strategy to protect the topological nature of indenene during ex situ processing and device fabrication. Here we show that intercalation of indenene into epitaxial graphene provides effective protection from the oxidising environment, while preserving an intact topological character. Our approach opens a rich realm of ex situ experimental opportunities, priming monolayer quantum spin Hall insulators for realistic device fabrication and access to topologically protected edge channels.
ABSTRACT
Structural moiré superstructures arising from two competing lattices may lead to unexpected electronic behavior. Sb is predicted to show thickness-dependent topological properties, providing potential applications for low-energy-consuming electronic devices. Here we successfully synthesize ultrathin Sb films on semi-insulating InSb(111)A. Despite the covalent nature of the substrate, which has dangling bonds on the surface, we prove by scanning transmission electron microscopy that the first layer of Sb atoms grows in an unstrained manner. Rather than compensating for the lattice mismatch of -6.4% by structural modifications, the Sb films form a pronounced moiré pattern as we evidence by scanning tunneling microscopy. Our model calculations assign the moiré pattern to a periodic surface corrugation. In agreement with theoretical predictions, irrespective of the moiré modulation, the topological surface state known on a thick Sb film is experimentally confirmed to persist down to small film thicknesses, and the Dirac point shifts toward lower binding energies with a decrease in Sb thickness.
ABSTRACT
We demonstrate a deterministic Purcell-enhanced single photon source realized by integrating an atomically thin WSe2 layer with a circular Bragg grating cavity. The cavity significantly enhances the photoluminescence from the atomically thin layer and supports single photon generation with g(2)(0) < 0.25. We observe a consistent increase of the spontaneous emission rate for WSe2 emitters located in the center of the Bragg grating cavity. These WSe2 emitters are self-aligned and deterministically coupled to such a broadband cavity, configuring a new generation of deterministic single photon sources, characterized by their simple and low-cost production and intrinsic scalability.
ABSTRACT
There is a great desire to extend ultrasonic techniques to the imaging and characterization of nanoobjects. This can be achieved by picosecond ultrasonics, where by using ultrafast lasers it is possible to generate and detect acoustic waves with frequencies up to terahertz and wavelengths down to nanometers. In our work we present a picosecond ultrasonics setup based on miniaturized mode-locked semiconductor lasers, whose performance allows us to obtain the necessary power, pulse duration and repetition rate. Using such a laser, we measure the ultrasonic echo signal with picosecond resolution in a 112 nm thick Al film deposited on a semiconductor substrate. We show that the obtained signal is as good as the signal obtained with a standard bulky mode-locked Ti-Sa laser. The experiments pave the way for designing integrated portable picosecond ultrasonic setups on the basis of miniaturized semiconductor lasers.
ABSTRACT
When an electron-hole pair is optically excited in a semiconductor quantum dot, the host crystal lattice adapts to the presence of the generated charge distribution. Therefore, the coupled exciton-phonon system has to establish a new equilibrium, which is reached in the form of a quasiparticle called a polaron. Especially, when the exciton is abruptly generated on a timescale faster than the typical lattice dynamics, the lattice cannot follow adiabatically. Consequently, rich dynamics on the picosecond timescale of the coupled system is expected. In this study, we combine simulations and measurements of the ultrafast, coherent, nonlinear optical response, obtained by four-wave mixing (FWM) spectroscopy, to resolve the formation of this polaron. By detecting and investigating the phonon sidebands in the FWM spectra for varying pulse delays and different temperatures, we have access to the influence of phonon emission and absorption processes, which finally result in the emission of an acoustic wave packet.
ABSTRACT
Single-molecule localization microscopy (SMLM) aims for maximized precision and a high signal-to-noise ratio1. Both features can be provided by placing the emitter in front of a metal-dielectric nanocoating that acts as a tuned mirror2-4. Here, we demonstrate that a higher photon yield at a lower background on biocompatible metal-dielectric nanocoatings substantially improves SMLM performance and increases the localization precision by up to a factor of two. The resolution improvement relies solely on easy-to-fabricate nanocoatings on standard glass coverslips and is spectrally and spatially tunable by the layer design and wavelength, as experimentally demonstrated for dual-color SMLM in cells.
ABSTRACT
Microlasers are ideal candidates to bring the fascinating variety of nonlinear complex dynamics found in delay-coupled systems to the realm of quantum optics. Particularly attractive is the possibility of tailoring the devices' emission properties via non-invasive delayed optical coupling. However, until now scarce research has been done in this direction. Here, we experimentally and theoretically investigate the effects of delayed optical feedback on the mode-switching dynamics of an electrically driven bimodal quantum-dot micropillar laser, characterizing its impact on the micropillar's output power, optical spectrum and photon statistics. Feedback is found to influence the switching dynamics and its characteristics time scales. In addition, stochastic switching is reduced with the subsequent impact on the microlaser photon statistics. Our results contribute to the comprehension of feedback-induced phenomena in micropillar lasers and pave the way towards the external control and tailoring of the properties of these key systems for the nanophotonics community.
ABSTRACT
Fluorescence microscopy allows specific and selective imaging of biological samples. Unfortunately, unspecific background due to auto-fluorescence, scattering, and non-ideal labeling efficiency often adversely affect imaging. Surface plasmon-coupled emission (SPCE) is known to selectively mediate fluorescence that spatially originates from regions close to the metal interface. However, SPCE combined with fluorescence imaging has not been widely successful so far, most likely due to its limited photon yield, which makes it tedious to identify the exact window of the application. As the strength of SPCE based imaging is its unique sectioning capabilities. We decided to identify its clear beneficial operational regime for biological settings by interrogating samples in the presence of ascending background levels. For fluorescent beads as well as live-cell imaging as examples, we show how to extend the imaging performance in extremely high photon background environments. In a common setup using plasmonic gold-coated coverslips using an objective-based total internal reflection fluorescence microscope (TIRF-M), we theoretically and experimentally characterize our fluoplasmonics (f-Pics) approach by providing general user guidance in choosing f-Pics over TIRF-M or classical wide-field (WF).
ABSTRACT
The collection efficiency of light from a point-like emitter may be extremely poor due to aberrations induced by collection optics and the emission distribution of the source. Analyzing the aberrant wavefront (e.g., with a Shack-Hartmann sensor) and correcting accordingly can be infeasible on the single-photon level. We present a technique that uses a genetic algorithm to control a deformable mirror for correcting wavefront aberrations in single-photon signals from point emitters. We apply our technique to both a simulated point source and a real InAs quantum dot, achieving coupling increases of up to 50% and automatic reduction of system drift.
ABSTRACT
Quantum state transfer from flying photons to stationary matter qubits is an important element in the realization of quantum networks. Self-assembled semiconductor quantum dots provide a promising solid-state platform hosting both single photon and spin, with an inherent light-matter interface. Here, we develop a method to coherently and actively control the single-photon frequency bins in superposition using electro-optic modulators, and measure the spin-photon entanglement with a fidelity of 0.796±0.020. Further, by Greenberger-Horne-Zeilinger-type state projection on the frequency, path, and polarization degrees of freedom of a single photon, we demonstrate quantum state transfer from a single photon to a single electron spin confined in an InGaAs quantum dot, separated by 5 m. The quantum state mapping from the photon's polarization to the electron's spin is demonstrated along three different axes on the Bloch sphere, with an average fidelity of 78.5%.
ABSTRACT
Quantum photonics holds great promise for future technologies such as secure communication, quantum computation, quantum simulation, and quantum metrology. An outstanding challenge for quantum photonics is to develop scalable miniature circuits that integrate single-photon sources, linear optical components, and detectors on a chip. Plasmonic nanocircuits will play essential roles in such developments. However, for quantum plasmonic circuits, integration of stable, bright, and narrow-band single photon sources in the structure has so far not been reported. Here we present a plasmonic nanocircuit driven by a self-assembled GaAs quantum dot. Through a planar dielectric-plasmonic hybrid waveguide, the quantum dot efficiently excites narrow-band single plasmons that are guided in a two-wire transmission line until they are converted into single photons by an optical antenna. Our work demonstrates the feasibility of fully on-chip plasmonic nanocircuits for quantum optical applications.
ABSTRACT
Measured and calculated results are presented for the emission properties of a new class of emitters operating in the cavity quantum electrodynamics regime. The structures are based on high-finesse GaAs/AlAs micropillar cavities, each with an active medium consisting of a layer of InGaAs quantum dots (QDs) and the distinguishing feature of having a substantial fraction of spontaneous emission channeled into one cavity mode (high ß-factor). This paper demonstrates that the usual criterion for lasing with a conventional (low ß-factor) cavity, that is, a sharp non-linearity in the input-output curve accompanied by noticeable linewidth narrowing, has to be reinforced by the equal-time second-order photon autocorrelation function to confirm lasing. The paper also shows that the equal-time second-order photon autocorrelation function is useful for recognizing superradiance, a manifestation of the correlations possible in high-ß microcavities operating with QDs. In terms of consolidating the collected data and identifying the physics underlying laser action, both theory and experiment suggest a sole dependence on intracavity photon number. Evidence for this assertion comes from all our measured and calculated data on emission coherence and fluctuation, for devices ranging from light-emitting diodes (LEDs) and cavity-enhanced LEDs to lasers, lying on the same two curves: one for linewidth narrowing versus intracavity photon number and the other for g(2)(0) versus intracavity photon number.
ABSTRACT
Single photon sources are key components for various quantum information processing. For practical quantum applications, bright single photon sources with efficient fiber-optical interfaces are highly required. Here, bright fiber-coupled single photon sources based on InAs quantum dots are demonstrated through the k-vector matching between a microfiber mode and a normal mode of the linear photonic crystal cavity. One of the modes of the linear photonic crystal cavity whose k-vector is similar to that of the microfiber mode is employed. From independent transmission measurement, the coupling efficiency directly into the fiber of 58% is obtained. When the quantum dot and cavity system is non-resonantly pumped with 80 MHz pulse train, a raw count rate of 1.81 MHz is obtained with g(2)(0) = 0.46. Resonant pump is expected to improve the rather high g(2)(0) value. Time-resolved photoluminescence is also measured to confirm the three-fold Purcell enhancement. This system provides a promising route for efficient direct fiber collections of single photons for quantum information processing.
ABSTRACT
We have studied the sensitivity of AlGaAs/GaAs double barrier resonant tunneling diode photodetectors with an integrated GaInNAs absorption layer for light sensing at the telecommunication wavelength of λ = 1.3 µm for illumination powers from pico- to microwatts. The sensitivity decreases nonlinearly with power. An illumination power increase of seven orders of magnitude leads to a reduction of the photocurrent sensitivity from S I = 5.82 × 10(3) A W(-1) to 3.2 A W(-1). We attribute the nonlinear sensitivity-power dependence to an altered local electrostatic potential due to hole-accumulation that on the one hand tunes the tunneling current, but on the other hand affects the lifetime of photogenerated holes. In particular, the lifetime decreases exponentially with increasing hole population. The lifetime reduction results from an enhanced electrical field, a rise of the quasi-Fermi level, and an increased energy splitting within the triangular potential well. The non-constant sensitivity is a direct result of the non-constant lifetime. Based on these findings, we provide an expression that allows us to calculate the sensitivity as a function of illumination power and bias voltage, show a way to model the time-resolved photocurrent, and determine the critical power up to which the resonant tunneling diode photodetector sensitivity can be assumed constant.
ABSTRACT
By pulsed s-shell resonant excitation of a single quantum dot-micropillar system, we generate long streams of 1000 near-transform-limited single photons with high mutual indistinguishability. The Hong-Ou-Mandel interference of two photons is measured as a function of their emission time separation varying from 13 ns to 14.7 µs, where the visibility slightly drops from 95.9(2)% to a plateau of 92.1(5)% through a slow dephasing process occurring at a time scale of 0.7 µs. A temporal and spectral analysis reveals the pulsed resonance fluorescence single photons are close to the transform limit, which are readily useful for multiphoton entanglement and interferometry experiments.
ABSTRACT
Light is often characterized only by its classical properties, like intensity or coherence. When looking at its quantum properties, described by photon correlations, new information about the state of the matter generating the radiation can be revealed. In particular the difference between independent and entangled emitters, which is at the heart of quantum mechanics, can be made visible in the photon statistics of the emitted light. The well-studied phenomenon of superradiance occurs when quantum-mechanical correlations between the emitters are present. Notwithstanding, superradiance was previously demonstrated only in terms of classical light properties. Here, we provide the missing link between quantum correlations of the active material and photon correlations in the emitted radiation. We use the superradiance of quantum dots in a cavity-quantum electrodynamics laser to show a direct connection between superradiant pulse emission and distinctive changes in the photon correlation function. This directly demonstrates the importance of quantum-mechanical correlations and their transfer between carriers and photons in novel optoelectronic devices.
ABSTRACT
The implementation and engineering of bright and coherent solid state quantum light sources is key for the realization of both on chip and remote quantum networks. Despite tremendous efforts for more than 15 years, the combination of these two key prerequisites in a single, potentially scalable device is a major challenge. Here, we report on the observation of bright single photon emission generated via pulsed, resonance fluorescence conditions from a single quantum dot (QD) deterministically centered in a micropillar cavity device via cryogenic optical lithography. The brightness of the QD fluorescence is greatly enhanced on resonance with the fundamental mode of the pillar, leading to an overall device efficiency of η = (74 ± 4) % for a single photon emission as pure as g(2)(0) = 0.0092 ± 0.0004. The combination of large Purcell enhancement and resonant pumping conditions allows us to observe a two-photon wave packet overlap up to ν = (88 ± 3) %.
ABSTRACT
Light amplification by stimulated emission of radiation, well-known for revolutionising photonic science, has been realised primarily in fermionic systems including widely applied diode lasers. The prerequisite for fermionic lasing is the inversion of electronic population, which governs the lasing threshold. More recently, bosonic lasers have also been developed based on Bose-Einstein condensates of exciton-polaritons in semiconductor microcavities. These electrically neutral bosons coexist with charged electrons and holes. In the presence of magnetic fields, the charged particles are bound to their cyclotron orbits, while the neutral exciton-polaritons move freely. We demonstrate how magnetic fields affect dramatically the phase diagram of mixed Bose-Fermi systems, switching between fermionic lasing, incoherent emission and bosonic lasing regimes in planar and pillar microcavities with optical and electrical pumping. We collected and analyzed the data taken on pillar and planar microcavity structures at continuous wave and pulsed optical excitation as well as injecting electrons and holes electronically. Our results evidence the transition from a Bose gas to a Fermi liquid mediated by magnetic fields and light-matter coupling.
ABSTRACT
Scalable photonic quantum technologies require on-demand single-photon sources with simultaneously high levels of purity, indistinguishability, and efficiency. These key features, however, have only been demonstrated separately in previous experiments. Here, by s-shell pulsed resonant excitation of a Purcell-enhanced quantum dot-micropillar system, we deterministically generate resonance fluorescence single photons which, at π pulse excitation, have an extraction efficiency of 66%, single-photon purity of 99.1%, and photon indistinguishability of 98.5%. Such a single-photon source for the first time combines the features of high efficiency and near-perfect levels of purity and indistinguishabilty, and thus opens the way to multiphoton experiments with semiconductor quantum dots.