Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters











Database
Language
Publication year range
1.
J Biomech ; 156: 111670, 2023 07.
Article in English | MEDLINE | ID: mdl-37352737

ABSTRACT

The material and morphometric properties of trabecular bone have been studied extensively in bones bearing significant weight, such as the appendicular long bones and spine. Less attention has been devoted to the ribs, where quantification of material properties is vital to understanding thoracic injury. The objective of this study was to quantify the compressive material properties of human rib trabecular bone and assess the effects of loading rate, age, and morphology on the material properties. Material properties were quantified via uniaxial compression tests performed on trabecular bone samples at two loading rates: 0.005 s-1 and 0.5 s-1. Morphometric parameters of each sample were quantified before testing using micro-computed tomography. Rib trabecular bone material properties were lower on average compared to trabecular bone from other anatomical locations. Morphometric parameters indicated an anisotropic structure with low connectivity and a sparser density of trabeculae in the rib compared to other locations. No significant differences in material properties were observed between the tested loading rates. Material properties were only significantly correlated with age at the 0.005 s-1 loading rate, and no morphometric parameter was significantly correlated with age. Trabecular separation and thickness were most strongly correlated with the material properties, indicating the sparser trabecular matrix likely contributed to the lower material property values compared to other sites. The novel trabecular bone material properties reported in this study can be used to improve the thoracic response and injury prediction of computational models.


Subject(s)
Cancellous Bone , Spine , Humans , X-Ray Microtomography , Cancellous Bone/diagnostic imaging , Ribs/diagnostic imaging , Pressure , Bone Density
2.
J Mech Behav Biomed Mater ; 122: 104668, 2021 10.
Article in English | MEDLINE | ID: mdl-34265671

ABSTRACT

The objectives of this study were to develop novel methods for quantifying human rib cortical bone material properties in compression and to compare the compressive material property data to existing tensile data for matched subjects. Cylindrical coupons were obtained from the rib cortical bone of 30 subjects (M = 19, F = 11) ranging from 18 to 95 years of age (Avg. = 48.5 ± 24.3). Two coupons were obtained from each subject. One coupon was tested in compression at 0.005 strain/s, while the other coupon was tested in compression at 0.5 strain/s. Load and displacement data were recorded so that the elastic modulus, yield stress, yield strain, ultimate stress, ultimate strain, elastic strain energy density (SED), plastic SED, and total SED could be calculated. All compressive material properties were significantly different between the two loading rates. An ANOVA revealed that sex alone had no significant effect on the compressive material properties. The interaction between sex and age was significant for some material properties, but this may have been a consequence of the lack of older females in the subject pool. None of the compressive material properties were significantly correlated with age, but were more correlated with sample density. This finding differed for the tensile material properties, which showed stronger correlations with age. When comparing between tension and compression, significant differences were observed for all material properties except for the total SED, once the effects of loading rate and age had been accounted for. This was the first study to quantify the material properties of human rib cortical bone in compression. The results of this study demonstrated that rib and thorax finite element models should consider the effects of loading rate, loading mode, and age when incorporating material properties published in the literature.


Subject(s)
Cortical Bone , Ribs , Compressive Strength , Elastic Modulus , Female , Humans , Stress, Mechanical , Thorax
4.
J Mech Behav Biomed Mater ; 102: 103410, 2020 02.
Article in English | MEDLINE | ID: mdl-31655338

ABSTRACT

The objective of this study was to evaluate the effects of sex, loading rate, and age on the tensile material properties of human rib cortical bone over a wide range of subject demographics. Sixty-one (n = 61) subjects (M = 32, F = 29) ranging in age from 17 to 99 years of age (Avg. = 56.4 ±â€¯26.2 yrs) were used in this study. Two rectangular coupons of cutaneous rib cortical bone were obtained from each subject and milled into dog-bone coupons for testing. For each subject, one coupon was tested to failure in tension on a material testing system at a targeted strain rate of 0.005 strain/s, while the other coupon was tested at 0.5 strain/s. A reaction load cell was used to measure axial load, and an extensometer was used to measure displacement within the gage length of the coupon. Data were obtained from fifty-eight (n = 58) subjects at 0.005 strain/s and fifty-eight (n = 58) subjects at 0.5 strain/s, with fifty-five (n = 55) matched pairs. The elastic modulus, yield stress, yield strain, failure stress, failure strain, ultimate stress, elastic strain energy density (SED), plastic SED, and total SED were then calculated for each test. There were no significant differences in material properties between sexes and no significant interactions between age and sex. In regard to the differences in material properties with respect to loading rate, yield stress, yield strain, failure stress, ultimate stress, elastic SED, plastic SED, and total SED were significantly lower at 0.005 strain/s compared to 0.5 strain/s. Spearman correlation analyses showed that all material properties had significant negative correlations with age at 0.005 strain/s except modulus. At 0.5 strain/s, all material properties except yield strain had significant negative correlations with age. Although the results revealed that the material properties of human rib cortical bone varied significantly with respect to chronological age, the R2 values only ranged from 0.15 to 0.62, indicating that there may be other underlying variables that better account for the variance within a given population. This is the first study to analyze the effects of sex, loading rate, and age on tensile material properties of human rib cortical bone using a reasonably large sample size. Overall, the results of this study provide data that will allow FEMs to better model and assess differences in the material response of the rib cage for nearly all vehicle occupants of driving age.


Subject(s)
Cortical Bone , Ribs , Animals , Biomechanical Phenomena , Dogs , Elastic Modulus , Humans , Stress, Mechanical , Tensile Strength
SELECTION OF CITATIONS
SEARCH DETAIL