ABSTRACT
Mobilization with movement (MWM) and myofascial release (MFR) are treatment techniques that increase ankle dorsiflexion range of motion (DFROM). Manual lymphatic drainage (MLD) facilitates waste drainage and improves soft tissue tension in peripheral tissues. To date, no studies have investigated how the combination of MLD, MWM, and MFR influences the human body. The purpose of this study is to determine how the combination of MLD, MWM, and MFR affects DFROM and balance ability. We randomly assigned 16 individuals (26 feet) to one of three groups: MWM-MFR (MR), MWM-MLD (MD), or MWM-MFR-MLD (MRD) intervention. To confirm the intervention effect of each group, DFROM was assessed using a modified lunge test, and dynamic balance was measured using a modified star excursion balance test. In the results, differences were found between the MR and MRD groups in PL and mGCM activities in the 1 section (p = 0.008, p = 0.036) and between the MD and MRD groups in mGCM activity in the 4 and 5 sections (p = 0.049, p = 0.004). We suggest that the application of MRD is the most effective intervention for increasing muscle activation of the PL and mGCM during the modified star excursion balance test.
ABSTRACT
Consumption of aflatoxin-contaminated food can cause severe illness when consumed by humans or livestock. Because the mycotoxin frequently occurs in cereal grains and other agricultural crops, it is crucial to develop portable devices that can be used non-destructively and in real-time to identify aflatoxin-contaminated food materials during early stages of harvesting or processing. In this study, an aflatoxin detection method was developed using a compact Raman device that can be used in the field. Data were obtained using maize samples naturally contaminated with aflatoxin, and the data were analyzed using a machine learning method. Of the multiple classification models evaluated, such as linear discriminant analysis (LDA), linear support vector machines (LSVM), quadratic discriminant analysis (QDA), and quadratic support vector machines and spectral preprocessing methods, the best classification accuracy was achieved at 95.7% using LDA in combination with Savitzky-Golay 2nd derivative (SG2) preprocessing. Partial least squares regression (PLSR) models demonstrated a close-range accuracy within the scope of standard normal variate (SNV) and multiplicative scatter correction (MSC) preprocessing methods, with determination of coefficient values of R2C and R2V of 0.9998 and 0.8322 respectively for SNV, and 0.9916 and 0.8387 respectively for MSC. This study demonstrates the potential use of compact and automated Raman spectroscopy, coupled with chemometrics and machine learning methods, as a tool for rapidly screening food and feed for hazardous substances at on-site field processing locations.
ABSTRACT
The aim of the present study was to elucidate the correlation between the International Caries Detection and Assessment System (ICDAS) and the Snyder caries activity test (SCAT) for the assessment of early dental caries in preschool children. Dental health status of 153 children aged 3-5 years was evaluated by oral examination. The ICDAS stage (enamel opacity stage to cavitated dentine caries stage (stages 1-6)) was assigned based on the evaluation of each tooth surface by a trained dentist based on the number of decayed (d) and filled teeth (ft). In this study, scores of d3-6t (t, teeth), d3-6s (s, tooth surface), d3-6ft and d3-6fs were the cut-off points for enamel caries, set to ICDAS code 3 (d3). SCAT score was assigned based on the acid production level of lactic acid bacteria in plaque (scores: 1-4). Linear correlation analysis was used to determine the correlation between ICDAS and SCAT scores. The proportion of children for each of the dental caries status were as follows: d0, 46.4%; d1-2, 28.1%; d3-4, 9.8%; d5-6, 15.7%. Regarding SCAT scores, 30%, 30.1%, 26.8% and 12.4% children had no, mild, moderate and severe caries activity, respectively. The d3-6t, d3-6s, d3-6ft and d3-6fs indices increased with age and were 0.56, 0.82, 2.03 and 5.05, respectively. Children with a higher SCAT score had higher ICDAS scores (p < 0.05). Our findings suggest that a combination of ICDAS and SCAT scores is beneficial for diagnosing caries progression and highly active caries. Early childhood caries should be managed early to prevent the enamel opacity stage to progress to cavitation.
Subject(s)
Dental Caries , Tooth , Humans , Child, Preschool , Dental Caries/diagnosis , Cross-Sectional Studies , Dental Caries SusceptibilityABSTRACT
Aflatoxins and fumonisins, commonly found in maize and maize-derived products, frequently co-occur and can cause dangerous illness in humans and animals if ingested in large amounts. Efforts are being made to develop suitable analytical methods for screening that can rapidly detect mycotoxins in order to prevent illness through early detection. A method for classifying contaminated maize by applying hyperspectral imaging techniques including reflectance in the visible and near-infrared (VNIR) and short-wave infrared (SWIR) regions, and fluorescence was investigated. Machine learning classification models in combination with different preprocessing methods were applied to screen ground maize samples for naturally occurring aflatoxin and fumonisin as single contaminants and as co-contaminants. Partial least squares-discriminant analysis (PLS-DA) and support vector machine (SVM) with the radial basis function (RBF) kernel were employed as classification models using cut-off values of each mycotoxin. The classification performance of the SVM was better than that of PLS-DA, and the highest classification accuracies for fluorescence, VNIR, and SWIR were 89.1%, 71.7%, and 95.7%, respectively. SWIR imaging with the SVM model resulted in higher classification accuracies compared to the fluorescence and VNIR models, suggesting that as an alternative to conventional wet chemical methods, the hyperspectral SWIR imaging detection model may be the more effective and efficient analytical tool for mycotoxin analysis compared to fluorescence or VNIR imaging models. These methods represent a food safety screening tool capable of rapidly detecting mycotoxins in maize or other food ingredients consumed by animals or humans.
Subject(s)
Aflatoxins , Fumonisins , Mycotoxins , Humans , Animals , Aflatoxins/analysis , Fumonisins/analysis , Zea mays , Hyperspectral ImagingABSTRACT
This study presents a method for discriminating the geographical origin of dried chili peppers using femtosecond laser ablation-inductively coupled plasma-mass spectrometry (fsLA-ICP-MS) and multivariate analysis, such as orthogonal partial least squares discriminant analysis (OPLS-DA), heatmap analysis, and canonical discriminant analysis (CDA). Herein, 102 samples were analyzed for the content of 33 elements using optimized conditions of 200 Hz (repetition rate), 50 µm (spot size), and 90% (energy). Significant differences in count per second (cps) values of the elements were observed between domestic and imported peppers, with variations of up to 5.66 times (133Cs). The OPLS-DA model accuracy achieved an R2 of 0.811 and a Q2 of 0.733 for distinguishing dried chili peppers of different geographical origins. The variable importance in projection (VIP) and s-plot identified elements 10 and 3 as key to the OPLS-DA model, and in the heatmap, six elements were estimated to be significant in discriminating between domestic and imported samples. Furthermore, CDA showed a high accuracy of 99.02%. This method can ensure food safety for consumers, and accurately determine the geographic origin of agricultural products.
ABSTRACT
A biofilm is a three-dimensional microbial community, which is difficult to completely control with a typical sanitizer owing to its complex structure. The aim of this study was to establish a system for the combined treatment of biofilms with 10 ppmv gaseous chlorine dioxide (ClO2) and antimicrobial agents (2% citric acid, 2% hydrogen peroxide [H2O2], and 100 ppm peracetic acid [PAA]), and to investigate the synergistic microbicidal efficacy of the combination treatments to inactivate Listeria monocytogenes, Salmonella Typhimurium, and Escherichia coli O157:H7 in biofilms. The antimicrobial agents were aerosolized using a humidifier on top of a chamber to achieve a relative humidity of 90% (within a range of ±2%). While biofilm treatment with the aerosolized antimicrobial agents for 20 min inactivated approximately 1 log CFU/cm2 (0.72-1.26 log CFU/cm2) of the pathogens and the gaseous ClO2 gas treatment for 20 min inactivated <3 log CFU/cm2 (2.19-2.77 log CFU/cm2), combination treatment with citric acid, H2O2, and PAA for 20 min achieved microbial reductions of 2.71-3.79, 4.56-5.12, and 4.45-4.67 log CFU/cm2, respectively. Our study demonstrates that foodborne pathogens in biofilms can be inactivated by combining gaseous ClO2 treatment with aerosolized antimicrobial agents. The results of this study provide baseline data for the food industry to help control foodborne pathogens in biofilms on inaccessible surfaces.
Subject(s)
Anti-Infective Agents , Disinfectants , Listeria monocytogenes , Disinfectants/pharmacology , Colony Count, Microbial , Gases , Food Microbiology , Hydrogen Peroxide/pharmacology , Peracetic Acid/pharmacology , BiofilmsABSTRACT
The increased interest in outdoor activities has prompted the demand for water-repellent fabrics that can withstand various environmental factors. In this study, the water repellency and physical properties, namely thickness, weight, tensile strength, elongation, and stiffness, of cotton woven fabrics were analyzed according to various treatments with different types of household water-repellent agents and number of coating layers. Fluorine-, silicone-, and wax-based water-repellent agents were coated on cotton woven fabrics once, thrice, and five times. Thickness, weight, and stiffness increased with the number of coating layers, which may reduce comfort. These properties increased minimally for the fluorine- and silicone-based water-repellent agents, whereas they considerably increased for the wax-based water-repellent agent. The fluorine-based water-repellent agent had a low water repellency rating of 2.2 even after five coating layers, and the silicone-based water-repellent agent had a higher rating of 3.4 with the same five coating layers. Meanwhile, the wax-based water-repellent agent had the highest water repellency rating of 5 even with only one coating layer, which was maintained with repeated coatings. Therefore, fluorine- and silicone-based water-repellent agents minimally altered the fabric properties even with repeated coatings; multiple coating layers, especially five or more layers for the fluorine-based water-repellent agent, are recommended to attain excellent water repellency. Conversely, one coating layer of the wax-based water-repellent agent is recommended to retain the comfort of the wearer.
Subject(s)
Fluorine , Textiles , Physical Phenomena , Silicones , WaterABSTRACT
Oligonucleotides of adenine (A20), guanine (G20), cytosine (C20), thymine (T20), cytosine-guanine ((CG)20), and adenine-thymine ((AT)20) were investigated as model compounds for ice recrystallization inhibition (IRI). Dehydroxy uracil (dU20), U20, and T20 were also compared to investigate the effect of minute changes in the hydrophobicity of the oligonucleotides on the IRI activity. Among the oligonucleotides considered in this study, T20 exhibited the best performance for IRI. In addition, the degree of polymerization of oligothymines varied over 5, 10, 20, 30, 50, and 100, and T20 was found to be the most effective for IRI. The IRI mechanism was investigated by comparing U20 and T20, which exhibited the lowest and highest IRI activity, respectively, among the oligonucleotides for their dynamic ice-shaping, thermal hysteresis, and ice nucleation inhibition. Little or no dynamic ice-shaping activity and small thermal hysteresis were observed for both nucleotides. All of the findings suggest that not the ice-polymer adhesion but the hydrophobic interactions of T20 in the interface layer might interfere with the water deposition on the ice crystal surfaces and contribute to the IRI activity of the T20 oligonucleotide.
Subject(s)
Ice , Oligonucleotides , Thymine , Crystallization , Water , Antifreeze Proteins/chemistryABSTRACT
Several studies have demonstrated that nuclear magnetic resonance (NMR) metabolic profiles can differentiate patients with caries from healthy individuals; however, these studies only identified individual metabolites. The present study aimed to identify a salivary metabolite biomarker panel for the diagnosis of early childhood caries (ECC). Saliva samples from children with and without caries were analyzed using NMR spectroscopy. Multivariate and univariate analyses were performed to identify the discriminating metabolites. Selected metabolites were further evaluated and used to detect ECC. The saliva samples of children with ECC were characterized based on the increased levels of formate, glycerophosphocholine, and lactate and reduced levels of alanine, glycine, isoleucine, lysine, proline, and tyrosine. The levels of these metabolites were significantly different from those in the control in the ECC subgroup according to caries severity and correlated with the number of decayed and filled teeth or surfaces. Subsequently, an optimal salivary metabolite biomarker panel comprising formate, lactate, proline, and glycine was developed. This panel exhibited a better diagnostic performance for ECC than a single metabolite. These results demonstrate that salivary metabolic signatures can reflect oral conditions associated with dental caries, thereby emphasizing the importance of distinct salivary metabolic profiles as potential biomarkers of ECC.
ABSTRACT
Biofilms are surface-associated microbial clusters embedded in extracellular polymeric substances. Biofilms formed on food-contact surfaces create challenges for the food industry due to their increased tolerance to antimicrobial agents and disinfectants. This study aimed to evaluate the effect of the biofilm maturation period on their resistance to gaseous ClO2. Listeria monocytogenes, Salmonellaserotype Typhimurium, and Escherichia coli O157:H7 biofilms formed on stainless steel (SS) and high-density polyethylene (HDPE) surfaces were investigated. The total cell mass and protein content significantly increased (P < .05) between the second and the fifth day of maturation, and the biofilms' resistance to gaseous ClO2 increased as they matured. Generally, the cell counts of 0-day-old L. monocytogenes, Salm. Typhimurium, and E. coli O157:H7 biofilms on SS and HDPE reduced below the detection limit (0.48 log CFU/cm2) within 5 min. The cell counts of 2-day-old biofilms of the three pathogens were reduced by 6.22 to over 7.52 log, while those of 5-day-old biofilms were reduced by 3.64 to over 6.34 log after 20 min of treatment with 30 ppmv of gaseous ClO2. Therefore, as resistance increases with biofilm maturation, daily gaseous ClO2 treatment would maximize the antimicrobial efficacy of the cleaning strategy against biofilms.
Subject(s)
Anti-Infective Agents , Escherichia coli O157 , Gases/pharmacology , Colony Count, Microbial , Polyethylene/pharmacology , Food Microbiology , Biofilms , Anti-Infective Agents/pharmacologyABSTRACT
Tau is a microtubule-associated protein that forms insoluble filaments that accumulate as neurofibrillary tangles in neurodegenerative diseases such as Alzheimer's disease and other related tauopathies. A relationship between abnormal Tau accumulation and ubiquitin-proteasome system impairment has been reported. However, the molecular mechanism linking Tau accumulation and ubiquitin proteasome system (UPS) dysfunction remains unclear. Here, we show that overexpression of wild-type or mutant (P301L) Tau increases the abundance of polyubiquitinated proteins and activates the autophagy-lysosome pathway in mammalian neuronal cells. Previous studies found that PTK2 inhibition mitigates toxicity induced by UPS impairment. Thus, we investigated whether PTK2 inhibition can attenuate Tau-induced UPS impairment and cell toxicity. We found that PTK2 inhibition significantly reduces Tau-induced death in mammalian neuronal cells. Moreover, overexpression of WT or mutant Tau increased the phosphorylation levels of PTK2 and p62. We also confirmed that PTK2 inhibition suppresses Tau-induced phosphorylation of PTK2 and p62. Furthermore, PTK2 inhibition significantly attenuated the climbing defect and shortened the lifespan in the Drosophila model of tauopathy. In addition, we observed that phosphorylation of p62 is markedly increased in Alzheimer's disease patients with tauopathies. Taken together, our results indicate that the UPS dysfunction induced by Tau accumulation might contribute directly to neurodegeneration in tauopathies and that PTK2 could be a promising therapeutic target for tauopathies.
Subject(s)
Alzheimer Disease , Tauopathies , Animals , Alzheimer Disease/metabolism , tau Proteins/metabolism , Phosphorylation , Proteasome Endopeptidase Complex/metabolism , Tauopathies/metabolism , Ubiquitins/metabolism , Mammals/metabolismABSTRACT
This study evaluated the chlorine dioxide (ClO2) gas mediated inactivation of the biofilm cells of foodborne pathogens on food contact surfaces. Biofilm cells of Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes were developed on stainless steel (SS) and high density polyethylene (HDPE) coupon surfaces, and 5-day-old biofilms were treated with ClO2 gas at 60 and 90% relative humidity (RH) for up to 20 min. With an increase in gas concentration and treatment time, significant differences (p < 0.05) were observed between reduction levels under different RH conditions. Treatment with 50 ppmv of ClO2 gas (60% RH) for 20 min resulted in log reductions from 2.08 to 4.62 and 2.08 to 4.41 of the biofilm cells of three pathogens on SS and HDPE surfaces, respectively. The levels of biofilm cells of E. coli O157:H7, S. Typhimurium, and L. monocytogenes on SS and HDPE surfaces were reduced to below the detection limit (0.48 log CFU/cm2) within 15, 20, and 20 min, respectively, when exposure to 50 ppmv of ClO2 gas at 90% RH.
ABSTRACT
BACKGROUND: Despite the increasing attention to electronic health management information systems (HMISs) in global health, most African countries still depend on inefficient paper-based systems. Good Neighbors International and Evaluate 4 Health have recently supported the Ghana Health Service on the rollout of a mobile health-based HMIS called the e-Tracker system in 2 regions in Ghana. The e-Tracker is an Android-based tracker capture app that electronically manages maternal and child health (MCH) data. The Ghana Health Service has implemented this new system in Community Health Planning and Services in the 2 regions (Volta and Eastern). OBJECTIVE: This study aims to evaluate changes in health workers' capacity and behavior after using the e-Tracker to deliver MCH services. Specifically, the study assesses the changes in knowledge, attitude, and practice (KAP) of the health workers toward the e-Tracker system by comparing the pre- and postsurvey results. METHODS: The KAP of frontline health workers was measured through self-administered surveys before and after using the e-Tracker system to assess their capacity and behavioral change toward the system. A total of 1124 health workers from the Volta and Eastern regions responded to the pre-post surveys. This study conducted the McNemar chi-square test and Wilcoxon signed-rank test for a pre-post comparison analysis. In addition, random-effects ordered logistic regression analysis and random-effects panel analysis were conducted to identify factors associated with KAP level. RESULTS: The pre-post comparison analysis showed significant improvement in health workers' capacity, with higher knowledge and practice levels after using the e-Tracker system. As for knowledge, there was a 9.9%-point increase (from 559/1109, 50.41% to 669/1109, 60.32%) in the proportion of the respondents who were able to generate basic statistics on the number of children born in a random month within 30 minutes. In the practice section, the percentage of respondents who had scheduled clientencounters increased from 91.41% (968/1059) to 97.83% (1036/1059). By contrast, responses to the attitude (acceptability) became less favorable after experiencing the actual system. For instance, 48.53% (544/1121) initially expressed their preferences for an electronic system; however, the proportion decreased to 33.45% (375/1121) after the intervention. Random-effects ordered logistic regression showed that days of overwork were significantly associated with health workers' attitudes toward the e-Tracker system. CONCLUSIONS: This study provides empirical evidence that the e-Tracker system is conducive to enhancing capacity in MCH data management for providing necessary MCH services. However, the change in attitude implies that the users appear to feel less comfortable using the new system. As Ghana plans to scale up the electronic HMIS system using the e-Tracker to the national level, strategies to enhance health workers' attitudes are necessary to sustain this new system.
ABSTRACT
Purpose: An electronic health record (EHR) system known as the e-Tracker was introduced in community health facilities in Ghana and numerous advantages were expected for clinical staff, as evidenced by previous literature. However, little is known about public health officials' views, specifically in low-resource settings. This study aimed to investigate the perceptions of district health officers on data quality, use, and management following the adoption of tablet-based electronic health records in Ghana. Methods: A pre- and post-survey was conducted in two regions of Ghana that adopted the e-Tracker for the entire districts during the early stages of the national rollout. Sociodemographic information, internet connection environment, and perceptions on data quality, use, and management were measured. McNemar's test and Wilcoxon Signed-Rank test were performed to identify changes in perceptions. Chi-square test and Mann-Whitney U-test were used to find any statistical differences in demographic characteristics between the two regions. Results: Twenty-four out of 25 districts in Volta and 24 out of 26 districts in Eastern regions participated in both pre- and post-surveys, with a total of 73 participants. In terms of efficiency in data management, the district health officers reported reduced time commitment in data validation and aggregation. Within less than a year, however, no statistically significant improvement was found in data quality and the use of electronic data for relevant tasks. Conclusion: A new EHR system in low-resource settings can rapidly improve efficiency in data management from the public health officials' perspectives. Further impact evaluation is warranted to assess the long-term effect of the EHR system.
ABSTRACT
The microspheres for 1-month (PLGA-based) and 3-month (PLA-based) drug releases of leuprolide were manufactured using an IVL-DrugFluidic™ system and their morphology, particle size and distribution, and encapsulation efficiency were compared with the commercialized products. In vivo test was also conducted to monitor the amount of leuprolide and testosterone in plasma after a single subcutaneous injection in male Sprague-Dawley (SD) rats and male Beagle dogs. The median diameter, span value, drug loading, and encapsulation efficiency of PLGA-based microspheres (63.29 µm, 0.26, 13.15%, and 78.90%, respectively) and PLA-based microspheres (80.28 µm, 0.21, 14.42%, and 86.50%, respectively) demonstrated narrow particle size distribution (monodispersed) and efficient drug loading/encapsulation efficiency. Both the microspheres exhibited a desired time-dependent drug release profile and reduced initial burst release by 16-fold in SD rats and 240-fold in Beagle dogs compared to Leuplin DPS®. Moreover, the testosterone level in plasma was suppressed to < 0.50 ng/mL after 28 days with a steady plasma drug concentration. The results suggested that newly developed leuprolide-loaded microspheres produced by the IVL-DrugFluidic™ system could provide extended drug release with advantages such as reduced initial burst release and testosterone level suppression, along with steady plasma drug concentration, over the existing products.
Subject(s)
Leuprolide , Testosterone , Animals , Delayed-Action Preparations , Dogs , Male , Microspheres , Particle Size , Polylactic Acid-Polyglycolic Acid Copolymer , Rats , Rats, Sprague-DawleyABSTRACT
BACKGROUND: There are many models for predicting diabetes mellitus (DM), but their clinical implication remains vague. Therefore, we aimed to create various DM prediction models using easily accessible health screening test parameters. METHODS: Two sets of variables were used to develop eight DM prediction models. One set comprised 62 easily accessible examination results of commonly used variables from a tertiary university hospital. The second set comprised 27 of the 62 variables included in the national routine health checkups. Gradient boosting and random forest algorithms were used to develop the models. Internal validation was performed using the stratified 10-fold cross-validation method. RESULTS: The area under the receiver operating characteristic curve (ROC-AUC) for the 62-variable DM model making 12-month predictions for subjects without diabetes was the largest (0.928) among those of the eight DM prediction models. The ROC-AUC dropped by more than 0.04 when training with the simplified 27-variable set but still showed fairly good performance with ROC-AUCs between 0.842 and 0.880. The accuracy was up to 11.5% higher (from 0.807 to 0.714) when fasting glucose was included. CONCLUSION: We created easily applicable diabetes prediction models that deliver good performance using parameters commonly assessed during tertiary university hospital and national routine health checkups. We plan to perform prospective external validation, hoping that the developed DM prediction models will be widely used in clinical practice.
Subject(s)
Diabetes Mellitus , Machine Learning , Algorithms , Diabetes Mellitus/diagnosis , Diabetes Mellitus/epidemiology , Humans , Prospective Studies , ROC CurveABSTRACT
The autophagy-lysosomal pathway is an essential cellular mechanism that degrades aggregated proteins and damaged cellular components to maintain cellular homeostasis. Here, we identified HEXA-018, a novel compound containing a catechol derivative structure, as a novel inducer of autophagy. HEXA-018 increased the LC3-I/II ratio, which indicates activation of autophagy. Consistent with this result, HEXA-018 effectively increased the numbers of autophagosomes and autolysosomes in neuronal cells. We also found that the activation of autophagy by HEXA-018 is mediated by the AMPK-ULK1 pathway in an mTOR-independent manner. We further showed that ubiquitin proteasome system impairment- or oxidative stress-induced neurotoxicity was significantly reduced by HEXA-018 treatment. Moreover, oxidative stress-induced mitochondrial dysfunction was strongly ameliorated by HEXA-018 treatment. In addition, we investigated the efficacy of HEXA-018 in models of TDP-43 proteinopathy. HEXA-018 treatment mitigated TDP-43 toxicity in cultured neuronal cell lines and Drosophila. Our data indicate that HEXA-018 could be a new drug candidate for TDP-43-associated neurodegenerative diseases.
ABSTRACT
To evaluate in vivo drug release profiles in beagle dogs, finasteride-loaded PLGA microspheres were prepared using a novel method of IVL-PPF Microsphere® microfluidic device. Briefly, the dispersed phase (PLGA and finasteride in dichloromethane) was mixed with the continuous phase (0.25% w/v PVA aqueous solution) in the parallelized microchannels. After lyophilization, the diameter of the microspheres was around 40 µm (PLGA 7502A or 5002A) and around 30 µm (PLGA/PLA02A mixture). Their CV and span values suggested a narrow size distribution in repeated batch preparations. The in vivo drug release from the PLGA microspheres exhibited three substantial phases: an initial burst, a moderate release, and then a plateau. The microspheres based on PLGA 7502A (75:25 co-polymer) demonstrated extended drug release for around 1 month with a minimized initial burst release compared to PLGA 5002A (50:50 co-polymer). Moreover, the in vivo drug release profile in beagle dogs was proportionally related to the amount of drug loading. Furthermore, the addition of PLA02A into the fabrication of the microsphere synergistically extended the drug release up to 3 months. These results demonstrated the value of this method to achieve uniform microspheres and extend the drug release properties with interpretative in vivo PK profiles.