ABSTRACT
Natural organic matter (NOM) decreases the selenium (Se) mobility in soil and sediment. Biotic dissimilatory reduction of selenate and selenite and assimilation of the reduced Se species into biomolecules are thought to be primarily responsible for this decreased Se mobility. However, the possibility of Se immobilization due to the abiotic interaction of Se species with NOM is still poorly understood. Equilibrating selenate and selenite with a model NOM (Pahokee peat soil), followed by X-ray absorption spectroscopic analysis, this study shows that the NOM can abiotically reduce highly mobile selenate into relatively less mobile selenite. NOM can sorb Se species, especially selenite, considerably. Preloading of the NOM with Fe(III) increases the sorption of selenite and selenate by several orders of magnitude. Modeling of the Se and Fe K-edge EXAFS data revealed that Se species are sorbed to NOM due to indirect complexation with the organically complexed Fe(O,OH)6 octahedra through the corner- (2C) and edge-sharing (1E) and direct complexation with the oxygen-containing functional groups of the NOM. This study concludes that the abiotic reduction and complexation of the Se species with NOM can be the additional or alternative route of Se immobilization in the NOM-rich soil and sediment.
Subject(s)
Selenium Compounds , Selenium , Selenious Acid , Selenic Acid , Ferric Compounds , Selenium/chemistry , Soil/chemistry , Sodium SeleniteABSTRACT
This work systematically describes arsenic mobility and potential bioaccessibility of arsenic-enriched titanium dioxide water treatment residuals (TiO2 WTRs) by employing a suite of wet chemical experiments and spectroscopic measurements. Specifically, Environmental Protection Agency (EPA) digestion method 3051a indicated <3% of total arsenic in the solid phase was released, and arsenic assessed by EPA method 1340 for bioaccessibility was below detection limits. A novel finding is while the arsenic appeared to be stable under highly acidic digestion conditions, it is in fact highly mobile when exposed to simple phosphate solutions. On average, 55% of arsenic was extracted from all samples during a 50-day replenishment study. This was equivalent to 169 mg kg-1 arsenic released from the solid phase. Macroscopic desorption experiments indicated arsenic likely formed inner-sphere bonds with the TiO2 particles present in the samples. This was confirmed with X-ray absorption spectroscopy (XAS), where an interatomic distance of 3.32 Å and a coordination number (CN) of 1.79 titanium atoms were determined. This translates to a configuration of arsenic on TiO2 surfaces as a bidentate binuclear inner-sphere complex. Thus, both macroscopic and spectroscopic data are in agreement. During incubation experiments, arsenic(V) was actively reduced to arsenic(III); the amount of arsenic(III) in solution varied from 8 to 38% of total dissolved arsenic. Lastly, elevated concentrations and mobility of vanadium in these systems merit further investigation. The high mobility of arsenic and its potential for reduction when reintroduced into the environment, particularly in agriculturally important areas, presents an important risk when waste products are not properly managed.
Subject(s)
Arsenic , Water Purification , Arsenic/chemistry , Titanium/chemistry , Adsorption , Water Purification/methods , X-Ray Absorption SpectroscopyABSTRACT
Manganese (Mn) exists as Mn(II), Mn(III), or Mn(IV) in soils, and the Mn oxidation state controls the roles of Mn in numerous environmental processes. However, the variations of Mn oxidation states with climate remain unknown. We determined the Mn oxidation states in highly weathered bulk volcanic soils (primary minerals free) across two rainfall gradients covering mean annual precipitation (MAP) of 0.25-5 m in the Hawaiian Islands. With increasing MAP, the soil redox conditions generally shifted from oxic to suboxic and to anoxic despite fluctuating at each site; concurrently, the proportions of Mn(IV) and Mn(II) decreased and increased, respectively. Mn(III) was low at both low and high MAP, but accumulated substantially, up to 80% of total Mn, in soils with prevalent suboxic conditions at intermediate MAP. Mn(III) was likely hosted in Mn(III,IV) and iron(III) oxides or complexed with organic matter, and its distribution among these hosts varied with soil redox potentials and soil pH. Soil redox conditions and rainfall-driven leaching jointly controlled exchangeable Mn(II) in soils, with its concentration peaking at intermediate MAP. The Mn redox chemistry was at disequilibrium, with the oxidation states correlating with long-term average soil redox potentials better than with soil pH. The soil redox conditions likely fluctuated between oxic and anoxic conditions more frequently at intermediate than at low and high MAP, creating biogeochemical hot spots where Mn, Fe, and other redox-sensitive elements may be actively cycled.
Subject(s)
Ferric Compounds , Manganese , Manganese/analysis , Soil , Iron , Oxidation-ReductionABSTRACT
The research on strategies to reduce cadmium (Cd) accumulation in cacao beans is currently limited by a lack of understanding of the Cd transfer pathways within the cacao tree. Here, we elucidated the transfer of Cd from soil to the nib (seed) in a high Cd accumulating cacao cultivar. Here, we elucidated the transfer of Cd from soil to the nib (seed) in a high Cd accumulating cacao cultivar through Cd stable isotope fractionation, speciation (X-Ray Absorption Spectroscopy), and localization (Laser Ablation Inductively Coupled Plasma Mass Spectrometry). The plant Cd concentrations were 10-28 higher than the topsoil Cd concentrations and increased as placenta< nib< testa< pod husk< root< leaf< branch. The retention of Cd in the roots was low. Light Cd isotopes were retained in the roots whilst heavier Cd isotopes were transported to the shoots (Δ 114/110 Cd shoot-root = 0.27 ± 0.02 (weighted average ± standard deviation)). Leaf Cd isotopes were heavier than Cd in the branches (Δ 114/110 Cd IF3 leaves-branch = 0.18 ± 0.01 ), confirming typical trends observed in annual crops. Nibs and branches were statistically not distinguishable (Δ 114/110 Cd nib-branch = -0.08 ± 0.06 ), contrary to the leaves and nibs (Δ 114/110 Cd nib-IF3 leaves = -0.25 ± 0.05 ). These isotope fractionation patterns alluded to a more direct transfer from branches to nibs rather than from leaves to nibs. The largest fraction (57%) of total plant Cd was present in the branches where it was primarily bound to carboxyl-ligands (60-100%) and mainly localized in the phloem rays and phelloderm of the bark. Cadmium in the nibs was mainly bound to oxygen ligands (60-90%), with phytate as the most plausible ligand. The weight of evidence suggested that Cd was transferred like other nutrients from root to shoot and accumulated in the phloem rays and phelloderm of the branches to reduce the transfer to foliage. Finally, the data indicated that the main contribution of nib Cd was from the phloem tissues of the branch rather than from leaf remobilization. This study extended the limited knowledge on Cd accumulation in perennial, woody crops and revealed that the Cd pathways in cacao are markedly different than in annual crops.
ABSTRACT
Quantum dots (QDs) are widely used in optoelectronics, lighting, and photovoltaics leading to their potential release into the environment. The most promising alternative to the highly toxic cadmium selenide (CdSe) QDs are indium phosphide (InP) QDs, which show reduced toxicity and comparable optical and electronic properties. QD degradation leads to the release of toxic metal ions into the environment. Coating the QD core with robust shell(s) composed of another semi-conductor material enhances their properties and protects the QD from degradation. We recently developed double-shelled InP QDs, which proved to be less toxic than single-shell QDs. In the present study, we confirm their reduced cytotoxicity, with an LC50 at 77 nM for pristine gradient shell QDs and >100 nM for pristine thin and thick shell QDs. We also confirm that these three QDs, when exposed to simulated sunlight, show greater cytotoxicity compared to pristine ones, with LC50 ranging from 15 to 23 nM. Using a combination of spectroscopic and microscopic techniques, we characterize the degradation kinetics and transformation products of single- and double-shell QDs, when exposed to solar light at high temperature, simulating environmental conditions. Non-toxic pristine QDs degrade to form toxic In−phosphate, In−carboxylate, Zn−phosphate, and oxidized Se, all of which precipitate as heterogeneous deposits. Comparison of their degradation kinetics highlights that the QDs bearing the thickest ZnS outer shell are, as expected, the most resistant to photodegradation among the three tested QDs, as gradient shell, thin shell, and thick shell QDs lose their optical properties in less than 15 min, 60 min, and more than 90 min, respectively. They exhibit the highest photoluminescence efficiency, i.e., the best functionality, with a photoluminescence quantum yield in aqueous solution of 24%, as compared to 18% for the gradient shell and thin shell QDs. Therefore, they can be considered as safer-by-design QDs.
ABSTRACT
Iron-sulfur (Fe-S) clusters are prosthetic groups of proteins biosynthesized on scaffold proteins by highly conserved multi-protein machineries. Biosynthesis of Fe-S clusters into the ISCU scaffold protein is initiated by ferrous iron insertion, followed by sulfur acquisition, via a still elusive mechanism. Notably, whether iron initially binds to the ISCU cysteine-rich assembly site or to a cysteine-less auxiliary site via N/O ligands remains unclear. We show here by SEC, circular dichroism (CD), and Mössbauer spectroscopies that iron binds to the assembly site of the monomeric form of prokaryotic and eukaryotic ISCU proteins via either one or two cysteines, referred to the 1-Cys and 2-Cys forms, respectively. The latter predominated at pH 8.0 and correlated with the Fe-S cluster assembly activity, whereas the former increased at a more acidic pH, together with free iron, suggesting that it constitutes an intermediate of the iron insertion process. Iron not binding to the assembly site was non-specifically bound to the aggregated ISCU, ruling out the existence of a structurally defined auxiliary site in ISCU. Characterization of the 2-Cys form by site-directed mutagenesis, CD, NMR, X-ray absorption, Mössbauer, and electron paramagnetic resonance spectroscopies showed that the iron center is coordinated by four strictly conserved amino acids of the assembly site, Cys35, Asp37, Cys61, and His103, in a tetrahedral geometry. The sulfur receptor Cys104 was at a very close distance and apparently bound to the iron center when His103 was missing, which may enable iron-dependent sulfur acquisition. Altogether, these data provide the structural basis to elucidate the Fe-S cluster assembly process and establish that the initiation of Fe-S cluster biosynthesis by insertion of a ferrous iron in the assembly site of ISCU is a conserved mechanism.
Subject(s)
Escherichia coli Proteins , Iron-Sulfur Proteins , Cysteine/chemistry , Escherichia coli Proteins/chemistry , Iron/metabolism , Iron-Sulfur Proteins/chemistry , Sulfonylurea Compounds , Sulfur/metabolismABSTRACT
There is a demand for nanoparticles that are environmentally acceptable, but simultaneously efficient and low cost. We prepared silver nanoparticles (AgNPs) grafted on a native bio-based substrate (cellulose nanocrystals, CNCs) with high biocidal activity and no toxicological impact. AgNPs of 10 nm are nucleated on CNCs in aqueous suspension with content from 0.4 to 24.7 wt%. XANES experiments show that varying the NaBH4/AgNO3 molar ratio affects the AgNP oxidation state, while maintaining an fcc structure. AgNPs transition from 10 nm spherical NPs to 300 nm triangular-shaped AgNPrisms induced by H2O2 post-treatment. The 48 h biocidal activity of the hybrid tested on B. Subtilis is intensified with the increase of AgNP content irrespective of the Ag+/Ag0 ratio in AgNPs, while the AgNSphere-AgNPrism transition induces a significant reduction of biocidal activity. A very low minimum inhibitory concentration of 0.016 mg AgNP/mL is determined. A new long-term biocidal activity test (up to 168 h) proved efficiency favorable to the smaller AgNPs. Finally, it is shown that AgNPs have no impact on the phagocytic capacity of mammalian cells.
ABSTRACT
Initial Cadmium (Cd) isotope fractionation studies in cereals ascribed the retention of Cd and its light isotopes to the binding of Cd to sulfur (S). To better understand the relation of Cd binding to S and Cd isotope fractionation in soils and plants, we combined isotope and XAS speciation analyses in soil-rice systems that were rich in Cd and S. The systems included distinct water management (flooded vs. non-flooded) and rice accessions with (excluder) and without (non-excluder) functional membrane transporter OsHMA3 that transports Cd into root vacuoles. Initially, 13% of Cd in the soil was bound to S. Through soil flooding, the proportion of Cd bound to S increased to 100%. Soil flooding enriched the rice plants towards heavy isotopes (δ114/110Cd = -0.37 to -0.39%) compared to the plants that grew on non-flooded soils (δ114/110Cd = -0.45 to -0.56%) suggesting that preferentially light Cd isotopes precipitated into Cd sulfides. Isotope compositions in CaCl2 root extracts indicated that the root surface contributed to the isotope shift between soil and plant during soil flooding. In rice roots, Cd was fully bound to S in all treatments. The roots in the excluder rice strongly retained Cd and its lights isotopes while heavy isotopes were transported to the shoots (Δ114/110Cdshoot-root 0.16-0.19). The non-excluder rice accumulated Cd in shoots and the apparent difference in isotope composition between roots and shoots was smaller than that of the excluder rice (Δ114/110Cdshoot-root -0.02 to 0.08). We ascribe the retention of light Cd isotopes in the roots of the excluder rice to the membrane transport of Cd by OsHMA3 and/or chelating Cd-S complexes in the vacuole. Cd-S was the major binding form in flooded soils and rice roots and partly contributed to the immobilization of Cd and its light isotopes in soil-rice systems.
Subject(s)
Oryza , Soil Pollutants , Cadmium/analysis , Isotopes , Soil , Soil Pollutants/analysisABSTRACT
In this study, we investigate the interactions between the cellulose surface and Ag nanoparticles (AgNPs) for the purpose of manufacturing hybrid nanomaterials using bacterial cellulose nanocrystals (BCNs) as a model substrate. We focus on the role of the BCN surface chemistry on the AgNP nucleation obtained by chemical reduction of Ag+ ions. Homogeneous hybrid suspensions of BCN/AgNP are produced, regardless of whether the BCNs are quasi-neutral, negatively (TBCNs) or positively charged (ABCNs). The characterization of BCN/AgNP hybrids identifies the -OH surface groups as nucleation points for AgNPs, of about 20 nm revealing that surface charges only improve the accessibility to OH groups. X-ray Absorption technics (XANES and EXAFS) revealed a high metallic Ag0 content ranging from 88% to 97%. Moreover, the grafting of hydrophobic molecules on a BCN surface (HBCNs) does not prevent AgNP nucleation, illustrating the versatility of our method and the possibility to obtain bifunctional NPs. A H2O2 redox post-treatment on the hybrid induces an increase in AgNPs size, up to 90 nm as well as a shape variation (i.e., triangular). In contrast, H2O2 induces no size/shape variation for aggregated hybrids, emphasizing that the accessibility to -OH groups ensures the nucleation of bigger Ag nano-objects.
ABSTRACT
Hybrid nanoparticles involving 10-nm silver nanoparticles (AgNPs) nucleated on unmodified rod-like cellulose nanocrystals (CNCs) were prepared by chemical reduction. H2O2 used as a post-treatment induced a size-shape transition following a redox mechanism, passing from 10-nm spherical AgNPs to 300-nm triangular or prismatic NPs (AgNPrisms), where CNCs are the only stabilizers for AgNPs and AgNPrisms. We investigated the role of the H2O2/AgNP mass ratio (α) on AgNPs. At α values above 0.20, the large amount of H2O2 led to extensive oxidation that produced numerous nucleation points for AgNPrisms on CNCs. On the contrary, for α below 0.20, primary AgNPs are only partially oxidized, releasing a reduced amount of Ag+ ions and thus preventing the formation of AgNPrisms and reforming spherical AgNPs. While XRD and EXAFS reveal that the AgNP fcc crystal structure is unaffected by the H2O2 treatment, the XANES spectra proved that the AgNP-AgNPrism transition is always associated with an increase in the metallic Ag fraction (Ag0). In contrast, the formation of new 15-nm spherical AgNPs keeps the initial Ag0/Ag+ ratio unmodified. For the first time, we introduce a complete guide map for the fully-controlled preparation of aqueous dispersed AgNPs using CNC as a template.
ABSTRACT
Tunnel boring muds, coming from underground works, are considered as specific materials due to their intrinsic characteristics (granularity, clay content, water content, presence of heavy metals). In order to determine if they can be valorized in road construction or civil engineering, a complete characterization, including their environmental behavior, is necessary. Thus, the aim of this study is to characterize a tunnel boring mud sample from chemical, mineralogical, and environmental point of view. The studied material, a limestone mud, was characterized using different analytical techniques. Some pollutants and heavy metals were identified, such as sulfates and molybdenum (Mo), and specific analyses were performed to identify molybdenum speciation. As molybdenum was detected as traces in the studied material, it was necessary to increase its concentration. Thus, a nitric acid extraction was specifically developed at a laboratory scale with the aim to remove its high-calcium carbonate content. Then, synchrotron analyses were performed, allowing to obtain data on the oxidation state of molybdenum.
Subject(s)
Metals, Heavy , Molybdenum , Calcium Carbonate , Carbonates , Clay , Metals, Heavy/analysisABSTRACT
The effect of acidification on lead (Pb) and phosphorus (P) speciation in alkaline Pb-polluted soils that are amended with P to stabilize Pb is still unclear. It was studied in three alkaline Pb-polluted soils containing specific amounts of Soil Organic Matter (SOM), using multiple synchrotron-based techniques, i.e. bulk X-ray Absorption Fine Structure (XAFS) spectroscopy at Pb LIII- and P K-edges, micro-X-ray Fluorescence (µ-XRF), and micro-X-ray Diffraction (µ-XRD). These techniques provided unambiguous evidences that the formation of pyromorphite, i.e. the desired Pb stabilized chemical form, was severely limited in the acidified soil samples amended with fish bones or phosphoric acid (H3PO4). Most Pb present in the H3PO4-amended soil samples did not convert to pyromorphite due to Pb and P leaching and PbSO4(s) formation. In contrast, most Pb present in the fish bone-amended soil samples was unaffected by acidification and did not convert to pyromorphite as it was inaccessible to soil solution or retained by SOM, similarly to P. Additionally, Pb-SOM association increased with increasing SOM content. Results had important implications on the applicability of the P-based method to stabilize Pb within the first centimeters below surface of Pb-polluted alkaline soils, which potentially represent the most hazardous part of these soils.
ABSTRACT
P2W18Co4@MOF-545, which contains the sandwich-type polyoxometalate (POM) [(PW9O34)2Co4(H2O)2]10- (P2W18Co4) immobilized in the porphyrinic metal-organic framework (MOF), MOF-545, is a "three-in-one" (porosity + light capture + catalysis) heterogeneous photosystem for the oxygen-evolution reaction (OER). Thin films of this composite were synthesized on transparent and conductive indium tin oxide (ITO) supports using electrophoretic (EP) or drop-casting (DC) methods, thus providing easy-to-use devices. Their electro- and photocatalytic activities for OER were investigated. Remarkably, both types of films exhibit higher turnover numbers (TONs) than the original bulk material previously studied as a suspension for the photocatalytic OER, with TONs after 2 h equal to 1600 and 403 for DC and EP films, respectively, compared to 70 for the suspension. This difference of catalytic activities is related to the proportion of efficiently illuminated crystallites, whereby a DC thin film offers the largest proportion of POM@MOF crystallites exposed to light due to its lower thickness when compared to an EP film or crystals in suspension. Such devices can be easily recycled by simply removing them from the reaction medium and washing them before reuse. The films were fully characterized with extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopies, Raman, scanning electron microscopy, and electrochemistry before and after catalysis. The combination of all of these techniques shows the stability of both the POM and the MOF within the composite upon water-oxidation reaction.
ABSTRACT
Here, we report a study of white-ochre powders with targeted composition MnWO4 prepared via a coprecipitation method. Through X-ray total scattering combined with pair distribution function analysis and Rietveld refinement of X-ray diffraction data, we find that their crystal structure is similar to that of bulk-MnWO4, despite a mean crystallite size of 1.0-1.6 nm and a significant deviation of the average chemical composition from MnWO4. The chemical formula derived from elemental and thermogravimetric analyses is Mn0.8WO3.6(OH)0.4·3H2O. X-ray absorption and magnetic susceptibility measurements show that Mn and W have the same oxidation states as in MnWO4. No magnetic ordering or spin glass or superparamagnetic behavior is observed above 2 K, unlike in the case of MnWO4 nanocrystals having a mean size higher than 10 nm.
ABSTRACT
Lead (Pb) stabilization in polluted soils treated by a Pb immobilization technique may be dependent on the speciation of Pb present in specific particle-size fractions of the soil. However, the scale-dependency of Pb speciation in contaminated soils is still not clearly understood. In this study, the natures and amounts of Pb chemical forms were determined in five Pb-polluted soil samples from Klity Village, Thailand, and their particle-size fractions. This was achieved using multiple analytical tools, including bulk extended X-ray absorption fine structure (EXAFS) spectroscopy at the Pb LIII edge. Results suggested that cerussite, Pb sorbed to goethite, and Pb-humate were present in specific amounts in all bulk samples and their particle-size fractions. The highest amounts of Pb-humate were found in the smallest particles of the soil samples. This Pb form was present in the fine particles of a soil sample, but remained undetected when analyzing the bulk sample. Since Pb-SOM association may impede the formation of pyromorphite in soils, the results implied that the extent of Pb immobilization in a polluted soil treated by P may be less than predicted if Pb speciation is only characterized at the macroscopic scale from the bulk soil sample prior remediation.
Subject(s)
Soil Pollutants , Environmental Pollution , Soil , Thailand , X-Ray Absorption SpectroscopyABSTRACT
Pyrite is a ubiquitous mineral in reducing environments and is well-known to incorporate trace elements such as Co, Ni, Se, Au, and commonly As. Indeed, As-bearing pyrite is observed in a wide variety of sedimentary environments, making it a major sink for this toxic metalloid. Based on the observation of natural hydrothermal pyrites, As-I is usually assigned to the occupation of tetrahedral S-I sites, with the same oxidation state as in arsenopyrite (FeAsS), although rare occurrences of AsIII and AsII have been reported. However, the modes of As incorporation into pyrite during its crystallization under low-temperature diagenetic conditions have not yet been elucidated because arsenic acts as an inhibitor for pyrite nucleation at ambient temperature. Here, we provide evidence from X-ray absorption spectroscopy for AsII,III incorporation into pyrite at octahedral FeII sites and for As-I at tetrahedral S-I sites during crystallization at ambient temperature. Extended X-ray absorption fine structure (EXAFS) spectra of these As-bearing pyrites are explained by local structure models obtained using density functional theory (DFT), assuming incorporation of As at the Fe and S sites, as well as local clustering of arsenic. Such observations of As-I incorporation at ambient temperature can aid in the understanding of the early formation of authigenic arsenian pyrite in subsurface sediments. Moreover, evidence for substitution of AsII,III for Fe in our synthetic samples raises questions about both the possible occurrence and the geochemical reactivity of such As-bearing pyrites in low-temperature subsurface environments.
Subject(s)
Arsenic , Ferrous Compounds , Iron/chemistry , Oxidation-Reduction , Temperature , X-Ray Absorption SpectroscopyABSTRACT
The cadmium (Cd) phytoremediation capabilities of Gynura pseudochina, Chromolaena odorata, Conyza sumatrensis, Crassocephalum crepidioides and Nicotiana tabacum were determined by conducting in-situ experiments in a highly Cd-contaminated agricultural field at Mae Sot District, Tak Province, Thailand. Most of these five plant species, which are commonly found in Thailand, previously demonstrated Cd-hyperaccumulating capacities under greenhouse conditions. This study represented an important initial step in determining if any of these plants could, under field-conditions, effectively remove Cd from the Mae Sot contaminated fields, which represent a health threat to thousands of local villagers. All plant species had at least a 95% survival rate on the final harvest day. Additionally, all plant species, except C. odorata, could hyperaccumulate the extractable Cd amounts present in the soil, based on their associated Bioaccumulation Factor (BAF), Translocation Factor (TF), and background Vegetation Factor (VF). Therefore, the four Cd-hyperaccumulating plant species identified in this study may successfully treat a majority of contaminated fields at Mae Sot, as it was previously reported that Cd amounts present in a number of these soils were mostly available.
Subject(s)
Agriculture , Cadmium/metabolism , Magnoliopsida/metabolism , Soil Pollutants/metabolism , Biodegradation, Environmental , Cadmium/isolation & purification , Soil/chemistry , Soil Pollutants/isolation & purification , ThailandABSTRACT
Layered, poorly crystalline Mn(IV)O(2) phases are abundant in the environment. These mineral phases may rapidly oxidize Cr(III) to more mobile and toxic Cr(VI) in soils. There is still, however, little knowledge of how Cr(III) oxidation by Mn(IV)O(2) proceeds at the microscopic and molecular levels. Therefore, the sorption mechanisms of Cr(III) and Cr(VI) on Random Stacked Birnessite (RSB), δ-MnO(2), and Acid Birnessite (AB) were determined by Extended X-ray Absorption Fine Structure Spectroscopy (EXAFS). These three synthetic Mn(IV)O(2), which are poorly crystalline phases and have layered structures, were reacted with 50 mM Cr(III) at pH 2.5, 3, and 3.5 before being analyzed by EXAFS. The results indicated that Cr(VI) was loosely sorbed as an outer-sphere complex on Mn(IV)O(2), while Cr(III) was tightly sorbed as an inner-sphere complex. Further research is needed to understand why Cr(III) stopped being significantly oxidized by Mn(IV)O(2) after 30 min. This study, however, demonstrated that the formation of a Cr surface precipitate is not necessarily responsible for the cessation in Cr(III) oxidation. Indeed, no Cr surface precipitate was detected at the microscopic and molecular levels on Mn(IV)O(2) surfaces reacted with Cr(III) for 1 h, although the Cr(III) oxidation ceased before 1 h of reaction at most employed experimental conditions.
Subject(s)
Chromium/chemistry , Manganese Compounds/chemistry , Oxides/chemistry , Crystallization , Hydrogen-Ion Concentration , Oxidation-Reduction , X-Ray Absorption SpectroscopyABSTRACT
The Cr(III)-oxidizing capacity of three layered poorly crystalline Mn(IV)O(2) phases, i.e. δ-MnO(2), Random Stacked Birnessite (RSB), and Acid Birnessite (AB), was determined in real-time and in situ, using Quick X-ray Absorption Fine Structure Spectroscopy (Q-XAFS). The results obtained with this technique, which allows the measurement of the total amount of Cr(VI) produced in the system, indicated that the Cr(III) oxidation reaction had ceased between 30 min and 1 h under most experimental conditions. However, this cessation was not observed with a traditional batch technique, which only allows the measurement of Cr(VI) present in solution and thus neglects the amount of Cr(VI) that may be sorbed to Mn(IV)O(2). This study also demonstrated that the Mn(IV)O(2) phase oxidizing the highest amount of Cr(III), which is positively charged in solution, was the mineral featuring the most negatively charged surface. Also, the results indicated that the presence of Mn(II) and/or Mn(III) impurities inside the Mn(IV)O(2) structure could enhance the mineral's capacity to oxidize Cr(III). The information provided in this study will be useful in predicting the capabilities of naturally occurring Mn oxide minerals, which are similar to the three synthetic Mn(IV)O(2) investigated, to oxidize Cr(III) to toxic and mobile Cr(VI) in the soil of contaminated sites.