ABSTRACT
In this study, gelatin/carboxylated cellulose nanocrystal (cCNC) bionanocomposite films were developed as an eco-friendly alternative to non-biodegradable flexible plastic packaging. Cellulose nanocrystals were modified by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation (cCNC) to strategically interact with amino groups present in the gelatin macromolecular backbone. Gelatin/cCNC bionanocomposite films (0.5-6.0 wt% cCNC) obtained by solution casting were transparent to visible light while displayed high UV-blocking properties. The chemical compatibility between gelatin and cCNC was deepened by electrostatic COO-/NH3+ interactions, as detected by FTIR spectroscopy and morphologically indicated by scanning electron microscopy (SEM). Accordingly, Young's modulus and tensile strength of films were largely increased by 80 and 64 %, respectively, specifically near the cCNC percolation threshold (4 wt%), whereas the water vapor permeability (WVP) was reduced by 52 % at the optimum 6.0 wt% cCNC content in relation to the non-reinforced gelatin matrix (0.10 vs. 0.18 g H2O mm m-2 h-1 kPa-1). The oxygen transmission rates (OTR) of the gelatin/cCNC bionanocomposites were < 0.01 cm3 m-2 day-1, making them technically competitive to most promising biopolymers like polycaprolactone (PCL) and poly(lactic acid) (PLA). This study reveals how TEMPO-oxidized cellulose nanocrystals can broaden the performance of biodegradable gelatin films for use in packaging. The gelatin/cCNC bionanocomposites also represent an effective approach for designing newly sustainability-inspired flexible materials from the surface modification of nanocelluloses targeting specific interactions with protein structures.
ABSTRACT
In the current context, the development of bio-based and high-performance materials is one of the main research priorities. This study aims to combine the outstanding properties of cellulose nanofibrils (CNFs) or nanocrystals (CNCs) with those of bio-based poly(lactic acid) (PLA). Three-phase multilayered materials (TMLs) were built up by complexing a dry CNF- or CNC-based film with two PLA sheets, using a heat-pressing process. Before the preparation of the nanocellulosic films, CNFs and CNCs were modified by the adsorption of a rosin-based nanoemulsion. The rosin mixture as a natural compound is of interest because of its low cost, renewability, hydrophobicity, and its antimicrobial and antioxidant properties. After demonstrating the efficiency of the complexing procedure, we investigated the barrier properties of the multilayered materials against both oxygen and water vapor, with highly encouraging results. In fact, the presence of nanocellulose as an inner layer between the two PLA films significantly enhanced the oxygen barrier, with a decrease in oxygen permeability comprised between 84 and 96% and between 44 and 50% for neat nanocelluloses and nanocelluloses with rosins as the inner layer, respectively. On the other hand, the antioxidant properties of the final multilayered materials including rosins were highlighted, with a highly encouraging radical scavenging activity close to 20%. Because of the simplicity and the efficiency of the proposed method, this study paves the way toward the development of hybrid multimaterials that could be highly attractive for food packaging applications.
ABSTRACT
Cellulose nanocrystals (CNCs) are used to design nanocomposites because of their high aspect ratio and their outstanding mechanical and barrier properties. However, the low compatibility of hydrophilic CNCs with hydrophobic polymers remains a barrier to their use in the nanocomposite field. To improve this compatibility, poly(glycidyl methacrylate) (PGMA) was grafted from CNCs containing α-bromoisobutyryl moieties via surface-initiated atom transfer radical polymerization. The novelty of this research is the use of a reactive epoxy-containing monomer that can serve as a new platform for further modifications or crosslinking. Polymer-grafted CNC-PGMA-Br prepared at different polymerization times were characterized by XRD, DLS, FTIR, XPS and elemental analysis. Approximately 40 % of the polymer at the surface of the CNCs was quantified after only 1â¯h of polymerization. Finally, nanocomposites prepared with 10â¯wt% CNC-PGMA-Br as nanofillers in a poly(lactic acid) (PLA) matrix exhibited an improvement in their compatibilization based on SEM observation.