Amplifying Photochromic Response in Tungsten Oxide Films with Titanium Oxide and Polyvinylpyrrolidone.

Tungsten oxide (WO3) is known for its photochromic properties, making it useful for smart windows, displays, and sensors. However, its small bandgap leads to rapid recombination of electron-hole pairs, resulting in poor photochromic performance. This study aims to enhance the photochromic properties of WO3 by synthesizing hexagonal tungsten oxide via hydrothermal synthesis, which increases surface area and internal hydrates. Titanium oxide (TiO2) was adsorbed onto the tungsten oxide to inject additional charges and reduce electron-hole recombination. Additionally, polyvinylpyrrolidone (PVP) was used to improve dispersion in organic solvents, allowing for the fabrication of high-quality films using the doctor blade method. Characterization confirmed the enhanced surface area, crystal structure, and dispersion stability. Reflectance and transmittance measurements demonstrated significant improvements in photochromic properties due to the composite structure. These findings suggest that the introduction of TiO2 and PVP to tungsten oxide effectively enhances its photochromic performance, broadening its applicability in various advanced photochromic applications.

Improvement in functional motor scores in patients with non-ambulatory spinal muscle atrophy during Nusinersen treatment in South Korea: a single center study.

We analyzed the changes in various motor function scores over a four-year period in patients with non-ambulatory spinal muscular atrophy (SMA) during Nusinersen treatment. Patients underwent Hammersmith Infant Neurological Examination (HINE) or Hammersmith Functional Motor Scale Expanded (HFMSE) before treatment, and approximately every 4 months thereafter. Children's Hospital of Philadelphia Infant Test of Neuromuscular Disorders (CHOP INTEND) or Children's Hospital of Philadelphia - Adult Test of Neuromuscular Disorders (CHOP ATEND), Revised Upper Limb Module (RULM), and Motor Function Measure (MFM) were performed based on baseline functional status. Narrative interviews were conducted to explore post-treatment physical improvement regarding activities of daily living (ADLs) and fatigue after ADLs. Based on HFMSE results, 9 patients achieved minimum clinically important differences. Average rates of change (slopes) with corresponding 95% confidence intervals for all assessment tools were in a positive direction. CHOP-INTEND showed the most prominent improvement in children and adolescents followed by HFMSE. Improvements in CHOP-ATEND were most noticeable in adults. Improvements were accompanied by changes in ADLs as observed in the narrative interviews. It is necessary to consider various functional aspects to determine the effectiveness of Nusinersen therapy. The objective assessment of the therapeutic effect of Nusinersen in non-ambulatory SMA requires consideration of functional aspects and the related ADLs.

Effects of exercise during active surveillance for prostate cancer: A systematic review and meta-analysis.

PURPOSE: The efficacy of exercise in men with prostate cancer (PCa) on active surveillance (AS) remains unclear. In this meta-analysis, we aimed to examine the effects of exercise in PCa patients on AS. METHODS: A literature search was conducted in PubMed, EMBASE, and the Cochrane Library using search terms, including exercise, PCa, AS, and randomized controlled trials (RCTs). The means and standard deviations for peak oxygen consumption (VO2peak), prostate-specific antigen (PSA) levels, and quality of life (QoL) were extracted for the intervention and control groups. A random-effects model was used to summarize the effects of exercise. RESULTS: Of the 158 identified studies, six RCTs with 332 patients were included. The interventions included lifestyle modifications (aerobic exercise + diet) in three studies and different exercise modalities in three studies. The intervention duration was 2-12 months; three interventions were supervised and three were self-directed. The pooled weighted mean difference between exercise and usual care for VO2peak was 1.42 mL/kg/min (95% confidence interval [CI]: 0.30 to 2.54, P ≤ 0.001). A non-significant effect was observed for QoL (pooled standardized mean difference [SMD]: 0.24, 95% CI: - 0.03 to 0.51, P = 0.08) which became statistically significant and stronger after excluding one outlier study (P < 0.001). Exercise also had a positive effect on PSA levels (pooled SMD: - 0.43, 95% CI: - 0.87 to 0.01, P = 0.05). CONCLUSION: Exercise improves cardiorespiratory fitness and may improve QoL and PSA levels in men with PCa on AS. Further studies with larger sample sizes are warranted to obtain more reliable results.

Selection of Catechin Biosynthesis-Related Genes and Functional Analysis from Chromosome-Level Genome Assembly in C. sinensis L. Variety 'Sangmok'.

Camellia is an important plant genus that includes well-known species such as C. sinensis, C. oleifera, and C. japonica. The C. sinensis cultivar 'Sangmok', one of Korea's standard types of tea landraces, is a small evergreen tree or shrub. Genome annotation has shown that Korean tea plants have special and unique benefits and superior components, such as catechin. The genome of Camellia sinensis cultivar 'Sangmok' was assembled on the chromosome level, with a length of 2678.62 Mbp and GC content of 38.16%. Further, 15 chromosome-scale scaffolds comprising 82.43% of the assembly (BUSCO completeness, 94.3%) were identified. Analysis of 68,151 protein-coding genes showed an average of 5.003 exons per gene. Among 82,481 coding sequences, the majority (99.06%) were annotated by Uniprot/Swiss-Prot. Further analysis revealed that 'Sangmok' is closely related to C. sinensis, with a divergence time of 60 million years ago. A total of 3336 exclusive gene families in 'Sangmok' were revealed by gene ontology analysis to play roles in auxin transport and cellular response mechanisms. By comparing these exclusive genes with 551 similar catechin genes, 17 'Sangmok'-specific catechin genes were identified by qRT-PCR, including those involved in phytoalexin biosynthesis and related to cytochrome P450. The 'Sangmok' genome exhibited distinctive genes compared to those of related species. This comprehensive genomic investigation enhances our understanding of the genetic architecture of 'Sangmok' and its specialized functions. The findings contribute valuable insights into the evolutionary and functional aspects of this plant species.

The Health Status and Management of Migrant Workers in Cheonan: A Comparison Study With Korean Citizens.

Migrant workers face challenging working conditions, resulting in physical and mental vulnerability. The objective is to identify their health vulnerabilities and ensure their right to health. Health records of 163 migrant workers (113 males and 50 females) (Group A) and 163 Korean citizens (Group B) visiting our institution were analyzed from August 2021 to July 2022. Both groups underwent urine analysis, chest radiography, and various blood tests. Statistical analysis using independent t-tests and χ² tests was performed. Group A had a significantly higher rate of hepatitis B virus surface antigen-positive patients, lower vaccination rates for hepatitis B, and poorer nutritional status compared to Group B. Group B generally exhibited higher levels of albumin, glucose, total cholesterol, and thyroid-stimulating hormone. There were significant quantitative differences in multiple blood cell and hemoglobin measurements between the two groups. These findings emphasize the need for policy support and public awareness to protect the health rights of migrant workers.

A novel 3D bilayer hydrogel tri-culture system for studying functional motor units.

BACKGROUND: A motor unit (MU) is formed by a single alpha motor neuron (MN) and the muscle fibers it innervates. The MU is essential for all voluntary movements. Functional deficits in the MU result in neuromuscular disorders (NMDs). The pathological mechanisms underlying most NMDs remain poorly understood, in part due to the lack of in vitro models that can comprehensively recapitulate multistage intercellular interactions and physiological function of the MU. RESULTS: We have designed a novel three-dimensional (3D) bilayer hydrogel tri-culture system where architecturally organized MUs can form in vitro. A sequential co-culture procedure using the three cell types of a MU, MN, myoblast, and Schwann cell was designed to construct a co-differentiating tri-culture on a bilayer hydrogel matrix. We utilized a µ-molded hydrogel with an additional Matrigel layer to form the bilayer hydrogel device. The µ-molded hydrogel layer provides the topological cues for myoblast differentiation. The Matrigel layer, with embedded Schwann cells, not only separates the MNs from myoblasts but also provides a proper micro-environment for MU development. The completed model shows key MU features including an organized MU structure, myelinated nerves, aligned myotubes innervated on clustered neuromuscular junctions (NMJs), MN-driven myotube contractions, and increases in cytosolic Ca2+ upon stimulation. CONCLUSIONS: This organized and functional in vitro MU model provides an opportunity to study pathological events involved in NMDs and peripheral neuropathies, and can serve as a platform for physiological and pharmacological studies such as modeling and drug screening. Technically, the rational of this 3D bilayer hydrogel co-culture system exploits multiple distinct properties of hydrogels, facilitating effective and efficient co-culturing of diverse cell types for tissue engineering.

A Small-Scale Hopper Design Using a Power Spring-Based Linear Actuator.

Hopping locomotion has the potential to enable small-scale robots to maneuver lands quickly while overcoming obstacles bigger than themselves. To make this possible, in this paper, we propose a novel design of a high-power linear actuator for a small-scale hopper. The key design principle of the linear actuator is to use a power spring and an active clutch. The power spring provides a near constant torque along the wide range of output displacement. The active clutch controls the moving direction and operation timing of the linear actuator, which enables the hopper to take off at the right timing. As a result, the hopper has a size of 143 mm, a mass of 45.9 g, and hops up to 0.58 m.

One-Step Hybrid Bending/Diffusion Bonding Process and Analysis of the Bonding Characteristics of Titanium Alloy Sheets.

A one-step hybrid bending/diffusion bonding process (HB/DBP) was developed for application to Ti-6Al-4V sheets to effectively improve buy-to-fly (BTF) ratio of aircraft parts, integrating sequential diffusion bonding followed by a bending process. The resulting bonding characteristics of these titanium alloy sheets were analyzed. Microstructural analysis and mechanical lap shear tests were performed to estimate the bonding quality. Additionally, bonding ratio, thickness strain, and shear strength were evaluated in relation to pressure under increasing temperature. When the applied pressure was lower than 0.5 MPa, early failure occurred at the joint of the specimens. However, when high pressure was applied, early failure occurred near the joint. To discuss the phenomenon, time-dependent viscoplastic material properties were characterized, and a numerical simulation analysis was performed. Viscoplastic deformation was observed around the bending area, which caused weakness around the bond under high-pressure conditions. A prototype of a Y-shaped heat shield was manufactured and the buy-to-fly ratio was effectively improved using the newly developed process. This study demonstrates the potential of applying the developed process for producing aircraft parts and the importance of viscoplastic behavior for the analysis of final product reliability.

Dipo: a miniaturized hopping robot via lightweight and compact actuator design for power amplification.

Kangaroo rats are well known as representative hoppers in small-scale animals. Especially kangaroo rats show rapid movement when a predator approaches. If this amazing motion can be applied to small-scale robots, they will be able to traverse lands at high speed while overcoming size limitations. To take advantage of hopping locomotion, in this paper, we present a lightweight and small-scale clutch-based hopping robot called Dipo. To make this possible, a compact power amplifying actuation system has been developed using a power spring and an active clutch. The power spring is possible to take out and use the accumulated energy little by little whenever the robot starts to hop. Moreover, the power spring needs low torque to charge the elastic energy, and a only tiny space is required to install. The active clutch controls the motion of hopping legs by adjusting the timing of energy release and storage. Thanks to these design strategies, the robot weighs 45.07 g, has the height of 5 cm in the stance phase, and achieves the maximum hopping height of 54.9 cm.

Chromosome-Scale Genome Assembly and Triterpenoid Saponin Biosynthesis in Korean Bellflower (Platycodon grandiflorum).

Platycodon grandiflorum belongs to the Campanulaceae family and is an important medicinal and food plant in East Asia. However, on the whole, the genome evolution of P. grandiflorum and the molecular basis of its major biochemical pathways are poorly understood. We reported a chromosome-scale genome assembly of P. grandiflorum based on a hybrid method using Oxford Nanopore Technologies, Illumina sequences, and high-throughput chromosome conformation capture (Hi-C) analysis. The assembled genome was finalized as 574 Mb, containing 41,355 protein-coding genes, and the genome completeness was assessed as 97.6% using a Benchmarking Universal Single-Copy Orthologs analysis. The P. grandiflorum genome comprises nine pseudo-chromosomes with 56.9% repeat sequences, and the transcriptome analysis revealed an expansion of the 14 beta-amylin genes related to triterpenoid saponin biosynthesis. Our findings provide an understanding of P. grandiflorum genome evolution and enable genomic-assisted breeding for the mass production of important components such as triterpenoid saponins.

Triterpenoids from the leaves of Abies koreana and their biological activities.

Seven undescribed triterpenoids, abikoranes A-G, along with three known triterpenoids were isolated from the leaves of Abies koreana E. H. Wilson. The structures of compounds were elucidated by 1D and 2D NMR, HRMS, ECD, specific rotation, and DP4+ analysis. Abikorane A represents the second example of nor-3,4-seco-17,14-friedo-lanostane triterpenoid. Among the isolates, some compounds showed strong cytotoxic activities against some of four tested cancer cell lines (A549, SK-OV-3, SK-MEL-2, and HCT-116) with the values of IC50 0.89-9.62 µM, inhibited lipopolysaccharide-stimulated nitric oxide production with IC50 values of 11.57-15.16 µM, and exhibited significant nerve growth factor release effect (192.54 ± 12.33%) from C6 glioma cells.

Applications of agricultural residue biochars to removal of toxic gases emitted from chemical plants: A review.

Crop residues are representative agricultural waste materials, massively generated in the world. However, a large fraction of them is currently being wasted, though they have a high potential to be used as a value-added carbon-rich material. Also, the applications of carbon-rich materials from agricultural waste to industries can have economic benefit because waste-derived carbon materials are considered inexpensive waste materials. In this review, valorization methods for crop residues as carbon-rich materials (i.e., biochars) and their applications to industrial toxic gas removals are discussed. Applications of crop residue biochars to toxic gas removal can have significant environmental benefits and economic feasibility. As such, this review discussed the technical advantages of the use of crop residue biochars as adsorbents for hazardous gaseous pollutants and greenhouse gases (GHGs) stemmed from combustion of fossil fuels and the different refinery processes. Also, the practical benefits from the activation methods in line with the biochar properties were comprehensively discussed. The relationships between the physico-chemical properties of biochars and the removal mechanisms of gaseous pollutants (H2S, SO2, Hg0, and CO2) on biochars were also highlighted in this review study. Porosity controls using physical and chemical activations along with the addition of specific functional groups and metals on biochars have significantly contributed to the enhancement of flue gas adsorption. The adsorption capacity of biochar for each toxic chemical was in the range of 46-76 mg g-1 for H2S, 40-182 mg g-1 for SO2, 80-952 µg g-1 for Hg0, and 82-308 mg g-1 CO2, respectively. This helps to find suitable activation methods for adsorption of the target pollutants. In the last part, the benefits from the use of biochars and the research directions were prospectively provided to make crop residue biochars more practical materials in adsorption of pollutant gases.

Survival benefit of direct transport to trauma centers among patients with unintentional injuries in Korea: a propensity score-matched analysis.

OBJECTIVE: This study investigated the characteristics and survival rates of patients with unintentional severe trauma who visited a regional trauma center (TC) or a non-TC. METHODS: This retrospective, national, population-based, observational, case-control study included patients with abnormal Revised Trauma Score from January 2018 to December 2018. We divided hospitals into two types, TC and non-TC, and compared several variables, including in-hospital mortality. Propensity score matching was used to reduce the effect of confounding variables that influence survival outcome variables. RESULTS: Of the 25,743 patients, 5,796 visited a TC and 19,947 visited a non-TC. Compared to patients treated at non-TCs, patients treated at TCs were more likely to have a higher Injury Severity Score (TC, 11.5; non-TC, 7.4; P<0.001), higher rate of surgery or transcatheter arterial embolization (TC, 39.2%; non-TC, 17.6%; P<0.001), and higher admission rate (TC, 64.7%; non-TC, 36.9%; P<0.001) through the emergency department. After propensity score matching, 2,800 patients from both groups were analyzed. Patients in the TC had a higher survival rate than patients that were not treated in the TC (TC, 83.0%; non-TC, 78.6%; P=0.003). CONCLUSION: This study using Korean emergency medical services data showed that initial transport to trauma centers was associated with mortality reduction. Further research is required because of limitations with use of single-year data and retrospective design.

NGSpop: A desktop software that supports population studies by identifying sequence variations from next-generation sequencing data.

Next-generation sequencing (NGS) is widely used in all areas of genetic research, such as genetic disease diagnosis and breeding, and it can produce massive amounts of data. The identification of sequence variants is an important step when processing large NGS datasets; however, currently, the process is complicated, repetitive, and requires concentration, which can be taxing on the researcher. Therefore, to support researchers who are not familiar enough with bioinformatics to identify sequence variations regularly from large datasets, we have developed a fully automated desktop software, NGSpop. NGSpop includes functionalities for all the variant calling and visualization procedures used when processing NGS data, such as quality control, mapping, filtering details, and variant calling. In the variant calling step, the user can select the GATK or DeepVariant algorithm for variant calling. These algorithms can be executed using pre-set pipelines and options or customized with the user-specified options. NGSpop is implemented using JavaFX (version 1.8) and can thus be run on Unix-like operating systems such as Ubuntu Linux (version 16.04, 18.0.4). Although several pipelines and visualization tools are available for NGS data analysis, most integrated environments do not support batch processes; thus, variant detection cannot be automated for population-level studies. The NGSpop software developed in this study has an easy-to-use interface and helps in rapid analysis of multiple NGS data from population studies. According to a benchmark test, it effectively reduced the carbon footprint in bioinformatics analysis by expending the least central processing unit heat and power. Additionally, this software makes it possible to use the GATK and DeepVariant algorithms more flexibly and efficiently than other programs by allowing users to choose between the algorithms. As a limitation, NGSpop currently supports only the sequencing reads in fastq format produced by the Illumina platform. NGSpop is freely available at https://sourceforge.net/projects/ngspop/.

Potential application of urease and nitrification inhibitors to mitigate emissions from the livestock sector: a review.

Human activities have caused an increase in greenhouse gas emissions, resulting in climate change that affects many factors of human life including its effect on water and food quality in certain areas with implications for human health. CH4 and N2O are known as potent non-CO2 GHGs. The livestock industry contributes to direct emissions of CH4 (38.24%) and N2O (6.70%) through enteric fermentation and manure treatment, as well as indirect N2O emissions via NH3 volatilization. NH3 is also a secondary precursor of particulate matter. Several approaches have been proposed to address this issue, including dietary management, manure treatment, and the possibility of inhibitor usage. Inhibitors, including urease and nitrification inhibitors, are widely used in agricultural fields. The use of urease and nitrification inhibitors is known to be effective in reducing nitrogen loss from agricultural soil in the form of NH3 and N2O and can further reduce CH4 as a side effect. However, the effectiveness of inhibitors in livestock manure systems has not yet been explored. This review discusses the potential of inhibitor usage, specifically of N-(n-butyl) thiophosphoric triamide, dicyandiamide, and 3,4-dimethylpyrazole phosphate, to reduce emissions from livestock manure. This review focuses on the application of inhibitors to manure, as well as the association of these inhibitors with health, toxicity, and economic benefits.

CRABP1-CaMKII-Agrn regulates the maintenance of neuromuscular junction in spinal motor neuron.

Cellular retinoic acid-binding protein 1 (CRABP1) binds retinoic acid (RA) specifically in the cytoplasm with unclear functions. CRABP1 is highly and specifically expressed in spinal motor neurons (MNs). Clinical and pre-clinical data reveal a potential link between CRABP1 and MN diseases, including the amyotrophic lateral sclerosis (ALS). We established a sequenced MN-muscle co-differentiation system to engineer an in vitro functional 3D NMJ model for molecular studies and demonstrated that CRABP1 in MNs contributes to NMJ formation and maintenance. Consistently, Crabp1 knockout (CKO) mice exhibited an adult-onset ALS-like phenotype with progressively deteriorated NMJs, characterized with behavioral, EchoMRI, electrophysiological, histological, and immunohistochemical studies at 2-20-months old. Mechanistically, CRABP1 suppresses CaMKII activation to regulate neural Agrn expression and downstream muscle LRP4-MuSK signaling, thereby maintaining NMJ. A proof-of-concept was provided by specific re-expression of CRABP1 to rescue Agrn expression and the phenotype. This study identifies CRABP1-CaMKII-Agrn signaling as a physiological pre-synaptic regulator in the NMJ. This study also highlights a potential protective role of CRABP1 in the progression of NMJ deficits in MN diseases.

The complete chloroplast genome of Artemisia Montana (Nakai) Pamp. (Asteraceae), a traditional medicinal herb in Korea.

Artemisia Montana (Nakai) Pamp. is a widely used heath food and a well-known traditional Korean herbal medicine. The complete chloroplast genome sequence of A. Montana was determined using high-throughput sequencing technology. Chloroplast genome was 151,133 bp in length, with a large single-copy (LSC) region of 98,497 bp, a small single-copy (SSC) region of 18,352 bp, separated by two inverted repeat (IR) regions of 17,142 bp each. It contained a total of 113 genes, with an overall GC content of 37.5%. The phylogenetic analysis showed that A. montana most closely related to A. feddei. This result will enrich the genetic resources of medicinal plant and useful for future investigation of genetics, evolution and identification of Artemisia species.

First Drinking Experiences during Adolescence in South Korea: A Qualitative Study Focusing on the Internal and External Factors.

This study explored the internal and external factors affecting the first drinking experience during Korean adolescence. To achieve this, we collected 34 cases revealing specific drinking experiences during adolescence in Alcoholic Anonymous (A.A.), Korea. The collected data were analyzed using a qualitative case study method, and the analysis focused on the internal and external factors influencing drinking in adolescence. As per the results, internal factors that influenced drinking in adolescence were "curiosity" and "elevated mood and stress relief", and external factors were "family", "friends", "older friends at school", "neighbors", "Korean tradition of alcohol making", "workplaces that encourage alcohol consumption", and "a generous drinking culture." Based on these findings, we suggested several practical alternatives, such as a stringent alcohol punishment system, government-led campaigns to overcome the generous alcohol culture, monitoring the drinking status of working and intern youths, and using local crime prevention guards to curb youth drinking. In future research, it is necessary to quantitatively verify the results of this study to develop theories related to adolescent drinking behavior.

Enhanced light extraction efficiency and viewing angle characteristics of microcavity OLEDs by using a diffusion layer.

The viewing angle characteristics and light extraction efficiency of organic light-emitting diodes (OLEDs) with a micro-cavity structure were enhanced. This was accomplished by inserting a diffusion layer composed of nano-sized structures of a transparent polymer poly(methyl methacrylate) (PMMA) combined with a zinc oxide (ZnO) semi-planarization layer with a high refractive index (n = 2.1) into the devices. The PMMA nanostructures were fabricated by employing a reactive ion etching (RIE) process. The height and density of the PMMA nanostructures were controlled by varying the speed at which the PMMA was spin-coated onto the substrate. The insertion of the diffusion layer into the micro-cavity OLEDs (MC-OLEDs) improved the external quantum efficiency (EQE) by as much as 17% when compared to that of a MC-OLED without a diffusion layer. Furthermore, adjustment of the viewing angle from 0° to 60° halved the peak shift distance of the electroluminescence (EL) spectra from 42 to 20 nm. Additionally, changing the viewing angle from 0° to 60° changed the color coordinate movement distance of the MC-OLED with the diffusion layer to 0.078, less than half of the distance of the MC-OLED without the diffusion layer (0.165).

NGS_SNPAnalyzer: a desktop software supporting genome projects by identifying and visualizing sequence variations from next-generation sequencing data.

BACKGROUND: Sequence variations such as single nucleotide polymorphisms are markers for genetic diseases and breeding. Therefore, identifying sequence variations is one of the main objectives of several genome projects. Although most genome project consortiums provide standard operation procedures for sequence variation detection methods, there may be differences in the results because of human selection or error. OBJECTIVE: To standardize the procedure for sequence variation detection and help researchers who are not formally trained in bioinformatics, we developed the NGS_SNPAnalyzer, a desktop software and fully automated graphical pipeline. METHODS: The NGS_SNPAnalyzer is implemented using JavaFX (version 1.8); therefore, it is not limited to any operating system (OS). The tools employed in the NGS_SNPAnalyzer were compiled on Microsoft Windows (version 7, 10) and Ubuntu Linux (version 16.04, 17.0.4). RESULTS: The NGS_SNPAnalyzer not only includes the functionalities for variant calling and annotation but also provides quality control, mapping, and filtering details to support all procedures from next-generation sequencing (NGS) data to variant visualization. It can be executed using pre-set pipelines and options and customized via user-specified options. Additionally, the NGS_SNPAnalyzer provides a user-friendly graphical interface and can be installed on any OS that supports JAVA. CONCLUSIONS: Although there are several pipelines and visualization tools available for NGS data analysis, we developed the NGS_SNPAnalyzer to provide the user with an easy-to-use interface. The benchmark test results indicate that the NGS_SNPAnayzer achieves better performance than other open source tools.