Dosimetric outcomes of preoperative treatment planning with intraoperative optimization using stranded seeds in prostate brachytherapy.

This study aimed to evaluate the quality of low-dose-rate (LDR) prostate brachytherapy (BT) based on treatment-related dosimetric outcomes. Data of 100 patients treated using LDR BT with stranded seeds from November 2012 to November 2017 were collected. The prescription dose for the prostate was 145 Gy. The dose constraints for the preoperative plan were: V100% ≥ 95%, V150% ≤ 60%, V200% ≤ 20% for the prostate; V100% for rectum, ≤ 1 cc; and V200 Gy for urethra, 0.0 cc. Intraoperative real-time dose calculation and postoperative dose distribution analysis on days 0 and 30 were performed. Median dosimetric outcomes on days 0 and 30 respective were: V100% 92.28% and 92.23%, V200% 18.63% and 25.02%, and D90% 150.88 Gy and 151.46 Gy for the prostate; V100% for the rectum, 0.11 cc and 0.22 cc; and V200 Gy for the urethra, 0.00 cc and 0.00 cc, respectively. Twenty patients underwent additional seed implantation to compensate for insufficient dose coverage of the prostate. No loss or substantial migration of seeds or severe toxicity was reported. With stranded seed implantation and intraoperative optimization, appropriate dose delivery to the prostate without excessive dose to the organs at risk could be achieved.

Microstructured Surfaces for Reducing Chances of Fomite Transmission via Virus-Containing Respiratory Droplets.

Evaporation-induced particle aggregation in drying droplets is of significant importance in the prevention of pathogen transfer due to the possibility of indirect fomite transmission of the infectious virus particles. In this study, particle aggregation was directionally controlled using contact line dynamics (pinned or slipping) and geometrical gradients on microstructured surfaces by the systematic investigation of the evaporation process on sessile droplets and sprayed microdroplets laden with virus-simulant nanoparticles. Using this mechanism, we designed robust particle capture surfaces by significantly inhibiting the contact transfer of particles from fomite surfaces. For the proof-of-concept, interconnected hexagonal and inverted pyramidal microwall were fabricated using ultraviolet-based nanoimprint lithography, which is considered to be a promising scalable manufacturing process. We demonstrated the potentials of an engineered microcavity surface to limit the contact transfer of particle aggregates deposited with the evaporation of microdroplets by 93% for hexagonal microwall and by 96% for inverted pyramidal microwall. The particle capture potential of the interconnected microstructures was also investigated using biological particles, including adenoviruses and lung-derived extracellular vesicles. The findings indicate that the proposed microstructured surfaces can reduce the indirect fomite transmission of highly infectious agents, including norovirus, rotavirus, or SARS-CoV-2, via respiratory droplets.

Detailed evaluation of Mobius3D dose calculation accuracy for volumetric-modulated arc therapy.

PURPOSE: To perform a detailed evaluation of dose calculation accuracy and clinical feasibility of Mobius3D. Of particular importance, multileaf collimator (MLC) modeling accuracy in the Mobius3D dose calculation algorithm was investigated. METHODS: Mobius3D was fully commissioned by following the vendor-suggested procedures, including dosimetric leaf gap (DLG) optimization. The DLG optimization determined an optimal DLG correction factor which minimized the average difference between calculated and measured doses for 13 patient volumetric-modulated arc therapy (VMAT) plans. Two sets of step-and-shoot plans were created to examine MLC and off-axis open fields modeling accuracy of the Mobius3D dose calculation algorithm: MLC test set and off-axis open field test set. The test plans were delivered to MapCHECK for the MLC tests and an ionization chamber for the off-axis open field test, and these measured doses were compared to Mobius3D-calculated doses. RESULTS: The mean difference between the calculated and measured doses across the 13 VMAT plans was 0.6% with an optimal DLG correction factor of 1.0. The mean percentage of pixels passing gamma from a 3%/1 mm gamma analysis for the MLC test set was 43.5% across the MLC tests. For the off-axis open field tests, the Mobius3D-calculated dose for 1.5 cm square field was -4.6% lower than the chamber-measured dose. CONCLUSIONS: It was demonstrated that Mobius3D has dose calculation uncertainties for small fields and MLC tongue-and-groove design is not adequately taken into consideration in Mobius3D. Careful consideration of DLG correction factor, which affects the resulting dose distributions, is required when commissioning Mobius3D for patient-specific QA.

Clinical Evaluation of Commercial Atlas-Based Auto-Segmentation in the Head and Neck Region.

Background: While atlas segmentation (AS) has proven to be a time-saving and promising method for radiation therapy contouring, optimal methods for its use have not been well-established. Therefore, we investigated the relationship between the size of the atlas patient population and the atlas segmentation auto contouring (AC) performance. Methods: A total of 110 patients' head planning CT images were selected. The mandible and thyroid were selected for this study. The mandibles and thyroids of the patient population were carefully segmented by two skilled clinicians. Of the 110 patients, 100 random patients were registered to 5 different atlas libraries as atlas patients, in groups of 20 to 100, with increments of 20. AS was conducted for each of the remaining 10 patients, either by simultaneous atlas segmentation (SAS) or independent atlas segmentation (IAS). The AS duration of each target patient was recorded. To validate the accuracy of the generated contours, auto contours were compared to manually generated contours (MC) using a volume-overlap-dependent metric, Dice Similarity Coefficient (DSC), and a distance-dependent metric, Hausdorff Distance (HD). Results: In both organs, as the population increased from n = 20 to n = 60, the results showed better convergence. Generally, independent cases produced better performance than simultaneous cases. For the mandible, the best performance was achieved by n = 60 [DSC = 0.92 (0.01) and HD = 6.73 (1.31) mm] and the worst by n = 100 [DSC = 0.90 (0.03) and HD = 10.10 (6.52) mm] atlas libraries. Similar results were achieved with the thyroid; the best performance was achieved by n = 60 [DSC = 0.79 (0.06) and HD = 10.17 (2.89) mm] and the worst by n = 100 [DSC = 0.72 (0.13) and HD = 12.88 (3.94) mm] atlas libraries. Both IAS and SAS showed similar results. Manual contouring of the mandible and thyroid required an average of 1,044 (±170.15) seconds, while AS required an average of 46.4 (±2.8) seconds. Conclusions: The performance of AS AC generally increased as the population of the atlas library increased. However, the performance does not drastically vary in the larger atlas libraries in contrast to the logic that bigger atlas library should lead to better results. In fact, the results do not vary significantly toward the larger atlas library. It is necessary for the institutions to independently research the optimal number of subjects.

Imaging heterogeneous nanostructures with a plasmonic resonant ridge aperture.

We introduce a plasmonic resonance ridge aperture capable of sensing changes in refractive index and absorption with nanoscale resolution. Using this aperture, we devised a plasmonic near-field scanning nanoscope (PNSN) to record images of heterogeneous nanostructures. Compared to a conventional near-field scanning optical microscope (NSOM) that measures light scattered by the sample, the PNSN directly measures the change in a beam reflected from the aperture to detect buried objects. Using the PNSN we recorded images of nanoscale rectangular groove arrays on a SiO(2) substrate with patterns typical of a dynamic random access memory circuit. By comparing the experimental and calculated image of the nanostructure, we estimate the resolution of PNSN to be ~20 nm, which is ~50% smaller than the near-field spot generated by the aperture. Also, we theoretically analyzed the feasibility of the PNSN detecting an object underneath a metal film.

Plasmonic nano lithography with a high scan speed contact probe.

We demonstrate plasmonic lithography with an optical contact probe to achieve high speed patterning without external gap distance control between the probe and the photoresist. The bottom surface of the probe is covered with a 10 nm thickness silica glass film for the gap distance control and coated with self-assembled monolayer (SAM) to reduce friction between the probe and the photoresist. We achieve a patterning resolution of ~50 nm and a patterning speed of ~10 mm/s. We obtain the quality of line patterning comparable to that in conventional optical lithography.

Modeling of three-dimensional photoresist profiles exposed by localized fields of high-transmission nano-apertures.

Using a simple theoretical model, we calculate three-dimensional profiles of photoresist exposed by arbitrarily shaped localized fields of high-transmission metal nano-apertures. We apply the finite difference time domain (FDTD) method to obtain the localized field distributions, which are generated by excitation of localized surface plasmon polaritons underneath a C-shaped or a bow-tie-shaped aperture. Incorporating the results of FDTD simulations with the theoretical model, we visualize three-dimensional exposure profiles of the photoresist as a function of the exposure dose and the gap distance between the aperture and the photoresist. It is found that the three-dimensional exposure profiles provide useful information for choosing process parameters for nanopatterning by plasmonic lithography using the aperture.