4-(Triethoxysilyl)butanoic acid as a self-assembled monolayer for surface modification of titanium dioxide.

In this study, the carboxy silane 4-(triethoxysilyl)butanoic acid (TESBA) was used to modify titanium dioxide (TiO2) to create a self-assembled monolayer (SAM) and then directionally immobilize a capture antibody using protein A. We selected the amino silane (3-aminopropyl)triethoxysilane (APTES) to perform a comparative analysis with TESBA, and employed glutaraldehyde (GA) as the control. The modification and detection effects and the limit of detection (LOD) were evaluated by detecting human immunoglobulin G (IgG). The average normalized sensitivity of the dual-grating coupler waveguide biosensor was 49.63 ± 0.27 RIU-1 and the optimum resolution was 1.30 × 10-6 RIU. When the SAM was prepared using TESBA and APTES followed by GA, the LOD was 4.59 × 10-7 g mL-1 and 5.29 × 10-7 g mL-1, respectively. We analyzed the modification and detection effects by the t-test and concluded that the differences in the modification effects using TESBA and APTES followed by GA were significant and the differences in the detection effects using TESBA and APTES followed by GA were insignificant. The use of TESBA as the SAM led to the modification effect being superior to that obtained using APTES followed by GA. The detection effect using TESBA was as outstanding as that using APTES followed by GA. Our findings demonstrate the feasibility and effectiveness of using TESBA as the SAM to carboxylate the surface of TiO2, thereby enabling immobilization of biomolecules for human IgG detection.

Exterior-electrode electrically driven microconcentrator.

This study uses negative dielectrophoresis and AC electroosmosis as a driving mechanism and presents an electrically driven microconcentrator that concentrates the sample in the region exterior to the electrodes (termed as exterior-electrode electrically driven microconcentrator in this paper). The proposed microconcentrator uses a 3-D face-to-face electrode pair; the top electrode is a relatively large planar electrode, and the bottom electrode is formed with three to six long and thin electrodes connected into an open ring. The sample is brought to the vicinity of the open electrode at the bottom by electroosmotic flow; then, negative dielectrophoresis is used to push the sample away from the electrode and concentrate it in the region surrounded by the open ring electrode. Concentration using an exterior-electrode electrically driven microconcentrator offers promise for convenient use in conjunction with relevant detection systems. The results indicate that for the proposed exterior-electrode electrically driven microconcentrator, the optimal frequency is 100 kHz and the optimal voltage is 13 Vp-p . The corner concentration process at the corners of the bottom open electrodes enables the multi-corner electrodes to exhibit better concentration results than that exhibited by semicircular-shaped electrodes. The concentration performance is most favorable when the shape of the open electrode at the bottom is a five-vertex electrode, enabling a concentration enhancement factor of 55 times for a latex particle solution and 11 times for E. coli. The experimental results also demonstrate that the concentration phenomenon in this study is not induced by non-specific adsorption and can be repeated multiple times.