Development of nanoparticles based on amphiphilic cyclodextrins for the delivery of active substances.

Although amphiphilic cyclodextrin derivatives (ACDs) serve as valuable building blocks for nanomedicine formulations, their widespread production still encounters various challenges, limiting large-scale manufacturing. This work focuses on a robust alternative pathway using mineral base catalysis to transesterify ß-cyclodextrin with long-chain vinyl esters, yielding ACD with modular and controlled hydrocarbon chain grafting. ACDs with a wide range of degrees of substitution (DS) were reliably synthesized, as indicated by extensive physicochemical characterization, including MALDI-TOF mass spectrometry. The influence of various factors, including the type of catalyst and the length of the hydrocarbon moiety of the vinyl ester, was studied in detail. ACDs were assessed for their ability to form colloidal suspensions by nanoprecipitation, with or without PEGylated phospholipid. Small-angle X-ray scattering and cryo-electron microscopy revealed the formation of nanoparticles with distinct ultrastructures depending on the DS: an onion-like structure for low and very high DS, and reversed hexagonal organization for DS between 4.5 and 6.1. We confirmed the furtivity of the PEGylated versions of the nanoparticles through complement activation experiments and that they were well tolerated in-vivo on a zebrafish larvae model after intravenous injection. Furthermore, a biodistribution experiment showed that the nanoparticles left the bloodstream within 10 h after injection and were phagocytosed by macrophages.

A scalable process to produce lipid-based compartmented Janus nanoparticles with pharmaceutically approved excipients.

In the field of nanotechnologies, theranostic approaches and fixed-dose combination products require the development of innovative carriers able to co-encapsulate several entities of interest. This communication describes the preparation and characterization of lipid-based Janus compartmented nanoparticles. They were successfully prepared using a scalable process with pharmaceutically approved excipients. The analysis of the microscopic structure and supramolecular organization demonstrated the formation of two physico-chemically different compartments enabling the co-administration at once of both liposoluble and hydrosoluble active pharmaceutical ingredients.

New nanoparticles obtained by co-assembly of amphiphilic cyclodextrins and nonlamellar single-chain lipids: Preparation and characterization.

This work aimed at preparing new nanoscale assemblies based on an amphiphilic bio-esterified ß-cyclodextrin (ß-CD), substituted at the secondary face with n-decanoic fatty acid chains (ß-CD-C10), and monoolein (MO) as new carriers for parenteral drug delivery. Stable binary (ß-CD-C10/MO) and ternary (ß-CD-C10/MO/stabilizer) nanoscale assemblies close to 100nm in size were successfully prepared in water by the solvent displacement method. The generated nanoparticles were fully characterized by dynamic light scattering, transmission electron microscopy, small-angle X-ray scattering, residual solvent analysis, complement activation and the contribution of each formulation parameter was determined by principal component analysis. The ß-CD-C10 units were shown to self-organize into nanoparticles with a hexagonal supramolecular packing that was significantly modulated by the molar ratio of the constituents and the presence of a steric or electrostatic stabilizer (DOPE-PEG2000 or DOPA/POPA, respectively). Indeed, nanoparticles differing in morphology and in hexagonal lattice parameters were obtained while the co-existence of multiple mesophases was observed in some formulations, in particular for the ß-CD-C10/MO/DOPA and ß-CD-C10/MO/POPA systems. The mixed ß-CD-C10/MO/DOPE-PEG2000 nanoparticles (49:49:2 in mol%) appeared to be the most suitable for use as a drug delivery system since they contained a very low amount of residual solvent and showed a low level of complement C3 activation.

Mesoporous self-assembled nanoparticles of biotransesterified cyclodextrins and nonlamellar lipids as carriers of water-insoluble substances.

Soft mesoporous hierarchically structured particles were created by the self-assembly of an amphiphilic deep cavitand cyclodextrin ßCD-nC10 (degree of substitution n = 7.3), with a nanocavity grafted by multiple alkyl (C10) chains on the secondary face of the ßCD macrocycle through enzymatic biotransesterification, and the nonlamellar lipid monoolein (MO). The effect of the non-ionic dispersing agent polysorbate 80 (P80) on the liquid crystalline organization of the nanocarriers and their stability was studied in the context of vesicle-to-cubosome transition. The coexistence of small vesicular and nanosponge membrane objects with bigger nanoparticles with inner multicompartment cubic lattice structures was established as a typical feature of the employed dispersion process. The cryogenic transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) structural analyses revealed the dependence of the internal organization of the self-assembled nanoparticles on the presence of embedded ßCD-nC10 deep cavitands in the lipid bilayers. The obtained results indicated that the incorporated amphiphilic ßCD-nC10 building blocks stabilize the cubic lattice packing in the lipid membrane particles, which displayed structural features beyond the traditional CD nanosponges. UV-Vis spectroscopy was employed to characterize the nanoencapsulation of a model hydrophobic dimethylphenylazo-naphthol guest compound (Oil red) in the created nanocarriers. In perspective, these dual porosity carriers should be suitable for co-encapsulation and sustained delivery of peptide, protein or siRNA biopharmaceuticals together with small molecular weight drug compounds or imaging agents.

Formulation and in vitro efficacy of liposomes containing the Hsp90 inhibitor 6BrCaQ in prostate cancer cells.

6BrCaQ is a promising anti-cancer agent derived from novobiocin, which has been shown to inhibit Hsp90. 6BrCaQ was loaded into nanometer-scaled phospholipid vesicles (liposomes) suitable for drug delivery to solid tumors. The effective incorporation of the drug within the phospholipid bilayer was investigated by differential scanning calorimetry. Liposomal 6BrCaQ showed good activity on PC-3 cell lines in vitro in terms of apoptosis induction and cell growth arrest in G2/M. Liposomes containing 6BrCaQ were also shown to slow down migration of PC-3 cells in presence of chemokine ligand 2 and to synergize with doxorubicin. Several Hsp90 targeting molecules like geldanamycin induce accumulation of Hsp70, leading to cytoprotection and often correlated with poor prognosis. In this study, we did not report any Hsp70 induction after treatment with liposomal 6BrCaQ but a decrease in Hsp90 and CDK-4 protein expression, indicating an effect on the chaperon machinery. Liposomal encapsulation of 6BrCaQ revealed promising anti-cancer effects and a better understanding of its mechanism of action.

Mechanical induction of the tumorigenic ß-catenin pathway by tumour growth pressure.

The tumour microenvironment may contribute to tumorigenesis owing to mechanical forces such as fibrotic stiffness or mechanical pressure caused by the expansion of hyper-proliferative cells. Here we explore the contribution of the mechanical pressure exerted by tumour growth onto non-tumorous adjacent epithelium. In the early stage of mouse colon tumour development in the Notch(+)Apc(+/1638N) mouse model, we observed mechanistic pressure stress in the non-tumorous epithelial cells caused by hyper-proliferative adjacent crypts overexpressing active Notch, which is associated with increased Ret and ß-catenin signalling. We thus developed a method that allows the delivery of a defined mechanical pressure in vivo, by subcutaneously inserting a magnet close to the mouse colon. The implanted magnet generated a magnetic force on ultra-magnetic liposomes, stabilized in the mesenchymal cells of the connective tissue surrounding colonic crypts after intravenous injection. The magnetically induced pressure quantitatively mimicked the endogenous early tumour growth stress in the order of 1,200 Pa, without affecting tissue stiffness, as monitored by ultrasound strain imaging and shear wave elastography. The exertion of pressure mimicking that of tumour growth led to rapid Ret activation and downstream phosphorylation of ß-catenin on Tyr654, imparing its interaction with the E-cadherin in adherens junctions, and which was followed by ß-catenin nuclear translocation after 15 days. As a consequence, increased expression of ß-catenin-target genes was observed at 1 month, together with crypt enlargement accompanying the formation of early tumorous aberrant crypt foci. Mechanical activation of the tumorigenic ß-catenin pathway suggests unexplored modes of tumour propagation based on mechanical signalling pathways in healthy epithelial cells surrounding the tumour, which may contribute to tumour heterogeneity.

Identification of large channels in cationic PEGylated cubosome nanoparticles by synchrotron radiation SAXS and Cryo-TEM imaging.

Extra-large nanochannel formation in the internal structure of cationic cubosome nanoparticles results from the interplay between charge repulsion and steric stabilization of the lipid membrane interfaces and is evidenced by cryogenic transmission electron microscopy (Cryo-TEM) and synchrotron radiation small-angle X-ray scattering (SAXS). The swollen cubic symmetry of the lipid nanoparticles emerges through a shaping transition of onion bilayer vesicle intermediates containing a fusogenic nonlamellar lipid. Cationic amphiphile cubosome particles, thanks to the advantages of their liquid crystalline soft porous nanoarchitecture and capability for multi-drug nanoencapsulation, appear to be of interest for the design of mitochondrial targeting devices in anti-cancer therapies and as siRNA nanocarriers for gene silencing.

Polymorphism of glyceryl behenates: from the individual compounds to the pharmaceutical excipient.

The present paper deals with the crystallization behavior of glyceryl behenate mixtures that are extensively used in the field of drug delivery. The aim of the study was to understand the structural and thermal behaviors of Compritol(®) by considering first the individual polymorphism of the main components constituting this excipient and then their mixtures. This excipient mainly contains dibehenin (∼50%), tribehenin (∼30%) and monobehenin (20%). It appeared clearly that the mixture polymorphism did not result from a simple addition of the individual behavior. Indeed, the solid state organization of this excipient strongly depended on the presence of the third main component, monobehenin, into the mixture. Furthermore, a threshold ratio of monobehenin, at least 10%, must be reach in order to obtain the typical structural organization (co-existence of α/sub-α subcells) and thermal behavior (solid-solid transition and melting) of Compritol(®). This underlines that special attention is required when mixing Compritol(®) with other pharmaceutical ingredients that could trap monoglycerides and modify the equilibrium present in the pure excipient.

Janus nanoparticles: materials, preparation and recent advances in drug delivery.

INTRODUCTION: The term Janus particles was used to describe particles that are the combination of two distinct sides with differences in chemical nature and/or polarity on each face. Due to the exponential growth of interest on multifunctional nanotechnologies, such anisotropic nanoparticles are promising tools in the field of drug delivery. AREAS COVERED: The main preparation processes and the materials used have been described first. Then a specific focus has been done on therapeutic and/or diagnostic applications of Janus particles. EXPERT OPINION: Janus particles are demonstrated as interesting objects with advanced properties that combine features and functionalities of different materials in one single unit. Due to their dual structure, Janus particles are promising candidates for a variety of high-quality applications dealing with drug delivery purposes. Still, the main challenges for the future lie in the development of the preparation of shape-controlled and nano-sized particles with large-scale production processes and approved pharmaceutical excipients.

Multicompartment lipid cubic nanoparticles with high protein upload: millisecond dynamics of formation.

Membrane shapes, produced by dynamically assembled lipid/protein architectures, are crucial for both physiological functions and the design of therapeutic nanotechnologies. Here we investigate the dynamics of lipid membrane-neurotrophic BDNF protein complexes formation and ordering in nanoparticles, with the purpose of innovation in nanostructure-based neuroprotection and biomimetic nanoarchitectonics. The kinetic pathway of membrane states associated with rapidly occurring nonequilibrium self-assembled lipid/protein nanoarchitectures was determined by millisecond time-resolved small-angle X-ray scattering (SAXS) at high resolution. The neurotrophin binding and millisecond trafficking along the flexible membranes induced an unusual overlay of channel-network architectures including two coexisting cubic lattices epitaxially connected to lamellar membrane stacks. These time-resolved membrane processes, involving intercalation of discrete stiff proteins in continuous soft membranes, evidence stepwise curvature control mechanisms. The obtained three-phase liquid-crystalline nanoparticles of neurotrophic composition put forward important advancements in multicompartment soft-matter nanostructure design.

Entrapment of a neutral Tm(III)-based complex with two inner-sphere coordinated water molecules into PEG-stabilized vesicles: towards an alternative strategy to develop high-performance LipoCEST contrast agents for MR imaging.

Chemical exchange saturation transfer (CEST) probes issued from the encapsulation of a water proton paramagnetic shift reagent into the inner aqueous volume of lipid vesicles provide an emerging class of frequency-selective contrast agents with huge potential in the field of molecular magnetic resonance imaging (MRI). This work deals with the generation of such LipoCEST agents properly designed to optimize, under isotonic conditions, the chemical shift offset of the intra-liposomal water protons as well as the number of exchangeable protons under reasonably low radiofrequency (RF) fields of saturation. The strategy lies in the loading of poly(ethylene glycol)-stabilized nanosized liposomes with uncharged lanthanide chelates, binding more than one water molecule in the first hydration sphere, exemplified here by [Tm(III)-DO3A (H2 O)2 ] complex. The key properties of the probes are demonstrated by complementary NMR investigations. The residence lifetime of the water molecules coordinated to the lanthanide center was outstandingly short (9.5 ± 0.2 ns from (17) O NMR), and indeed relevant for effective LipoCEST responsiveness. The (1) H NMR CEST spectra (7.01 T magnetic field) prove that the theoretically expected optimal sensitivity can be approximated in the nanomolar concentration range, at reasonably low RF presaturation pulses (6.7-12 µT) and saturation frequency offsets of the intra-liposomal water protons beyond 10 ppm, making possible selective irradiation in biological environment. CEST-MRI images (7.01 T magnetic field and 10-12 µT RF pulse) explicitly confirm the interest of these newly conceived LipoCEST agents, indeed among the most efficient ones developed so far under isosmotic conditions.

Nano-Assemblies of Modified Cyclodextrins and Their Complexes with Guest Molecules: Incorporation in Nanostructured Membranes and Amphiphile Nanoarchitectonics Design.

A variety of cyclodextrin-based molecular structures, with substitutions of either primary or secondary faces of the natural oligosaccharide macrocycles of α-, ß-, or γ-cyclodextrins, have been designed towards innovative applications of self-assembled cyclodextrin nanomaterials. Amphiphilic cyclodextrins have been obtained by chemical or enzymatic modifications of their macrocycles using phospholipidyl, peptidolipidyl, cholesteryl, and oligo(ethylene oxide) anchors as well as variable numbers of grafted hydrophobic hydrocarbon or fluorinated chains. These novel compounds may self-assemble in an aqueous medium into different types of supramolecular nanoassemblies (vesicles, micelles, nanorods, nanospheres, and other kinds of nanoparticles and liquid crystalline structures). This review discusses the supramolecular nanoarchitectures, which can be formed by amphiphilic cyclodextrin derivatives in mixtures with other molecules (phospholipids, surfactants, and olygonucleotides). Biomedical applications are foreseen for nanoencapsulation of drug molecules in the hydrophobic interchain volumes and nanocavities of the amphiphilic cyclodextrins (serving as drug carriers or pharmaceutical excipients), anticancer phototherapy, gene delivery, as well as for protection of instable active ingredients through inclusion complexation in nanostructured media.

From molecular to nanotechnology strategies for delivery of neurotrophins: emphasis on brain-derived neurotrophic factor (BDNF).

Neurodegenerative diseases represent a major public health problem, but beneficial clinical treatment with neurotrophic factors has not been established yet. The therapeutic use of neurotrophins has been restrained by their instability and rapid degradation in biological medium. A variety of strategies has been proposed for the administration of these leading therapeutic candidates, which are essential for the development, survival and function of human neurons. In this review, we describe the existing approaches for delivery of brain-derived neurotrophic factor (BDNF), which is the most abundant neurotrophin in the mammalian central nervous system (CNS). Biomimetic peptides of BDNF have emerged as a promising therapy against neurodegenerative disorders. Polymer-based carriers have provided sustained neurotrophin delivery, whereas lipid-based particles have contributed also to potentiation of the BDNF action. Nanotechnology offers new possibilities for the design of vehicles for neuroprotection and neuroregeneration. Recent developments in nanoscale carriers for encapsulation and transport of BDNF are highlighted.

Neurotrophin delivery using nanotechnology.

Deficits or overexpression of neurotrophins cause neurodegenerative diseases and psychiatric disorders. These proteins are required for the maintenance of the function, plasticity and survival of neurons in the central (CNS) and peripheral nervous systems. Significant efforts have been devoted to developing therapeutic delivery systems that enable control of neurotrophin dosage in the brain. Here, we suggest that nanoparticulate carriers favoring targeted delivery in specific brain areas and minimizing biodistribution to the systemic circulation should be developed toward clinical benefits of neuroregeneration. We also provide examples of improved targeted neurotrophin delivery to localized areas in the CNS.

Protein entrapment in PEGylated lipid nanoparticles.

Defining appropriate delivery strategies of therapeutic proteins, based on lipid nanoparticulate carriers, requires knowledge of the nanoscale organization that determines the loading and release properties of the nanostructured particles. Nanoencapsulation of three cationic proteins (human brain-derived neurotrophic factor (BDNF), α-chymotrypsinogen A, and histone H3) was investigated using anionic nanoparticle (NP) carriers. PEGylated lipid NPs were prepared from self-assembled liquid crystalline phases involving monoolein and eicosapentaenoic acid. Inclusion of the antioxidant α-tocopherol favoured the preparation of stealth hexosome carriers. The purpose of the present work is to reveal the structural features of the protein-loaded lipid nanocarriers by means of high resolution small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM). The obtained results indicate that protein entrapment is concentration-dependent and may significantly modify the inner liquid crystalline structure of the lipid nanocarriers through changes in the interfacial curvature and hydration.

A highly hydrated α-cyclodextrin/1-undecanol inclusion complex: crystal structure and hydrogen-bond network from high-resolution neutron diffraction at 20 K.

The monoclinic C2 crystal structure of an α-cyclodextrin/1-undecanol host-guest inclusion complex was solved using single-crystal neutron diffraction. Large high-quality crystals were specially produced by optimizing temperature-controlled growth conditions. The hydrate crystallizes in a channel-type structure formed by head-to-head dimer units of α-cyclodextrin molecules stacked like coins in a roll. The alkyl chain of the guest lipid is entirely embedded inside the tubular cavity delimited by the α-cyclodextrin dimer and adopts an all-trans planar zigzag conformation, while the alcohol polar head group is outside close to the α-cyclodextrin primary hydroxyl groups. The cyclodextrin dimer forms columns, which adopt a quasi-square arrangement much less compact than the quasi-hexagonal close packing already observed in the less hydrated α-cyclodextrin channel-type structures usually found with similar linear guests. The lack of compactness of this crystal form is related to the high number of interstitial water molecules. The replacement of 1-undecanol by 1-decanol does not modify the overall crystal structure of the hydrate as shown by additional X-ray diffraction investigations comparing the two host-guest assemblies. This is the first study that analyses the entire hydrogen-bonding network involved in the formation of a cyclodextrin dimer surrounded by its shell of water molecules.

Quatsomes: vesicles formed by self-assembly of sterols and quaternary ammonium surfactants.

Thermodynamically stable nanovesicle structures are of high interest for academia and industry in a wide variety of application fields, ranging from preparation of nanomaterials to nanomedicine. Here, we show the ability of quaternary ammonium surfactants and sterols to self-assemble, forming stable amphiphilic bimolecular building-blocks with the appropriate structural characteristics to form in aqueous phases, closed bilayers, named quatsomes, with outstanding stability, with time and temperature. The molecular self-assembling of cholesterol and surfactant cetyltrimethylammonium bromide (CTAB) was studied by quasi-elastic light scattering, cryogenic transmission electron microscopy, turbidity (optical density) measurements, and molecular dynamic simulations with atomistic detail, upon varying the cholesterol-to-surfactant molar ratio. As pure species, CTAB forms micelles and insoluble cholesterol forms crystals in water. However, our molecular dynamic simulations reveal that the synergy between CTAB and cholesterol molecules makes them self-assemble into bimolecular amphiphiles and then into bilayers in the presence of water. These bilayers have the same structure of those formed by double-tailed unimolecular amphiphiles.

DNA/Fusogenic Lipid Nanocarrier Assembly: Millisecond Structural Dynamics.

Structural changes occurring on a millisecond time scale during uptake of DNA by cationic lipid nanocarriers are monitored by time-resolved small-angle X-ray scattering (SAXS) coupled to a rapid-mixing stopped-flow technique. Nanoparticles (NPs) of nanochannel organization are formed by PEGylation, hydration, and dispersion of a lipid film of the fusogenic lipid monoolein in a mixture with positively charged (DOMA) and PEGylated (DOPE-PEG2000) amphiphiles and are characterized by the inner cubic structure of very large nanochannels favorable for DNA upload. Ultrafast structural dynamics of complexation and assembly of these cubosome particles with neurotrophic plasmid DNA (pDNA) is revealed thanks to the high brightness of the employed synchrotron X-ray beam. The rate constant of the pDNA/lipid NP complexation is estimated from dynamic roentgenograms recorded at 4 ms time resolution. pDNA upload into the vastly hydrated channels of the cubosome carriers leads to a fast nanoparticle-nanoparticle structural transition and lipoplex formation involving tightly packed pDNA.

Earliest stage of the tetrahedral nanochannel formation in cubosome particles from unilamellar nanovesicles.

Studies of nonequilibrium lipid polymorphism at the nanoscale contribute to the in-depth understanding of the structural pathways for formation of aqueous channels and emerging of channels-network ordering in liquid-crystalline (LC) nanovehicles. We present experimental structural evidence for the smallest tetrahedral-type lipid membrane aggregate, which involves completely formed nanochannels and occurs as an early intermediate state during the bilayer vesicle-to-cubosome particle transition. Nanovehicles are generated from a self-assembled lipid mixture and studied by means of high-resolution cryogenic transmission electron microscopy (cryo-TEM) and synchrotron radiation small-angle X-ray scattering (SAXS). The investigated lipid membrane composition allows for the stabilization of long-lived intermediates throughout the unilamellar vesicle-to-cubosome nanoparticle (NP) transformation at ambient temperature. The observed small cubosomic particles, with well-defined water channels, appear to be precursors of larger cubic membrane structures, thus confirming the theoretical modeling of nanochannel-network growth in diamond-type cubic lipid particles. The reported structural findings, highlighting that bilayer vesicle membrane packing and fusion are required for nanochanneled cubosome particle formation, are anticipated to advance the engineering of small lipid NPs with controllable channels for biomolecular loading and release.

Protein-containing PEGylated cubosomic particles: freeze-fracture electron microscopy and synchrotron radiation circular dichroism study.

The purpose of this work is to investigate the entrapment of protein molecules in cubosomic nanocarriers that are sterically stabilized by an amphiphilic poly(ethylene glycol) (PEG) derivative. Toward that aim, the mechanism of fragmentation of a self-assembled, PEGylated cubic lipid phase into nanoparticles (NPs) is investigated in excess aqueous medium. The molar ratio between the cubic-phase-forming lipid monoolein (MO) and its PEGylated derivative (MO-PEG(2000)) is selected as to favor the formation of inverted-type liquid-crystalline (LC) structures (permitting one to reveal the stages of the fragmentation and bicontinuous membrane NP assembly process) rather than a phase transformation to lamellar or micellar phases. The PEGylated amphiphile considerably affects the interfacial curvature of the cubic lipid membrane and, under agitation, contributes to the fragmentation of the bicontinuous cubic lattice into NPs. Freeze-fracture electron microscopy (FF-EM), quasi-elastic light scattering (QELS), and confocal laser scanning fluorescence microscopy (CLSFM) are applied for determination of the NPs' sizes, inner organization, and stability with regard to a thermal stimulus. Entrapped protein molecules can essentially stabilize the cubosomic particles (proteocubosomes), which display well-defined inner organization of nanochannels in their freeze-fracture planes. The protein α-chymotrypsinogen A is studied in proteocubosome dispersions by means of far-UV synchrotron radiation circular dichroism (SRCD) spectroscopy. It is suggested that the protein molecules are entrapped in the interior of the PEGylated cubosomes via a "nanopockets" mechanism. The LC PEGylated proteocubosomes offer new possibilities for investigation of protein loading in sterically stabilized ("Stealth") nanostructured lipid carriers, which differ from Poloxamer-stabilized isasomes.