Bifidobacterium longum subsp. infantis regulates Th1/Th2 balance through the JAK-STAT pathway in growing mice.

Objectives: Bifidobacterium longum subsp. infantis is a dominant bacterium in infant gut, which plays a critical role in maintaining the health and development of infants. This study investigated the abilities of eight different strains of B. longum subsp. infantis to regulate the T helper (Th)1/Th2 balance. Methods: Eight B. longum subsp. infantis strains, including I2MI (FJSWXI2MIM1), I4MI [FJSWXI4MI (CCFM1270)], I4MNI (FJSWXI4MNIM1), I5TI (FJSWXI5TIM1), I6TI (FJSWXI6TIM1), I8TI [FJSWXI8TI (CCFM1271)], I10TI [FJSWXI10TI (CCFM1272)], and B6MNI [BJSWXB6MNIM1 (CCFM1269)], were gavaged to BALB/C pups in both female (n = 8) and male (n = 8) mice starting from 1 to 3 weeks old (1 × 109 CFU/day/mice). Selected immune cells were assessed by immunofluorescence and flow cytometry. Cytokines and immunoglobulins were determined by ELISA. Bacterial and bifidobacterial communities were determined by 16S rRNA gene sequencing and bifidobacterial groEL sequencing. Results: B. longum subsp. infantis I4MI and I8TI were shown to increase the ration of colonic IgG2a/IgE in male mice (P < 0.05). B6MNI was demonstrated to significantly increase the levels of colonic IFN-γ and IgG2a, as well as the ratio of IgG2a/IgE in female mice (P < 0.05). It was also shown to significantly increase the ratio of colonic IgG2a/IgE (P < 0.05) and reduce the level of colonic IL-4 in male mice (P < 0.05). Furthermore, B6MNI was demonstrated to regulate colonic JAK/STAT pathway in both male and female mice. I4MI, I5TI, and B6MNI were shown to increase the relative abundance of Bifidobacterium and B. longum subsp. infantis in both male and female mice, whereas I8TI was only shown to increase the relative abundance of Bifidobacterium and B. longum subsp. infantis in male mice (P < 0.05). Conclusion: These results indicated supplementation with B. longum subsp. infantis in early infancy may regulate the Th1/Th2 immune balance, which may prevent the development of related diseases.

A Microfluidic Chip-Based Automated System for Whole-Course Monitoring the Drug Responses of Organoids.

Tumor patients-derived organoids, as a promising preclinical prediction model, have been utilized to evaluate ex vivo drug responses for formulating optimal therapeutic strategies. Detecting adenosine triphosphate (ATP) has been widely used in existing organoid-based drug response tests. However, all commercial ATP detection kits containing the cell lysis procedure can only be applied for single time point ATP detection, resulting in the neglect of dynamic ATP variations in living cells. Meanwhile, due to the limited number of viable organoids from a single patient, it is impractical to exhaustively test all potential time points in search of optimal ones. In this work, a multifunctional microfluidic chip was developed to perform all procedures of organoid-based drug response tests, including establishment, culturing, drug treatment, and ATP monitoring of organoids. An ATP sensor was developed to facilitate the first successful attempt on whole-course monitoring the growth status of fragile organoids. To realize a clinically applicable automatic system for the drug testing of lung cancer, a microfluidic chip based automated system was developed to perform entire organoid-based drug response test, bridging the gap between laboratorial manipulation and clinical practices, as it outperformed previous methods by improving data repeatability, eliminating human error/sample loss, and more importantly, providing a more accurate and comprehensive evaluation of drug effects.

A homologous membrane-camouflaged self-assembled nanodrug for synergistic antitumor therapy.

Limited success has been achieved in ferroptosis-induced cancer treatment due to the challenges related to low production of toxic reactive oxygen species (ROS) and inherent ROS resistance in cancer cells. To address this issue, a self-assembled nanodrug have been investigated that enhances ferroptosis therapy by increasing ROS production and reducing ROS inhibition. The nanodrug is constructed by allowing doxorubicin (DOX) to interact with Fe2+ through coordination interactions, forming a stable DOX-Fe2+ chelate, and this chelate further interacts with sorafenib (SRF), resulting in a stable and uniform nanoparticle. In tumor cells, overexpressed glutathione (GSH) triggers the disassembly of nanodrug, thereby activating the drug release. Interestingly, the released DOX not only activates nicotinamide adenine dinucleotide phosphate oxidase 4 (NOX4) to produce abundant H2O2 production for enhanced ROS production, but also acts as a chemotherapeutics agent, synergizing with ferroptosis. To enhance tumor selectivity and improve the blood clearance, the nanodrug is coated with a related cancer cell membrane, which enhances the selective inhibition of tumor growth and metastasis in a B16F10 mice model. Our findings provide valuable insights into the rational design of self-assembled nanodrug for enhanced ferroptosis therapy in cancer treatment. STATEMENT OF SIGNIFICANCE: Ferroptosis is a non-apoptotic form of cell death induced by the iron-regulated lipid peroxides (LPOs), offering a promising potential for effective and safe anti-cancer treatment. However, two significant challenges hinder its clinical application: 1) The easily oxidized nature of Fe2+ and the low concentration of H2O2 leads to a low efficiency of intracellular Fenton reaction, resulting in poor therapeutic efficacy; 2) The instinctive ROS resistance of cancer cells induce drug resistance. Therefore, we developed a simple and high-efficiency nanodrug composed of self-assembling by Fe2+ sources, H2O2 inducer and ROS resistance inhibitors. This nanodrug can effectively deliver the Fe2+ sources into tumor tissue, enhance intracellular concentration of H2O2, and reduce ROS resistance, achieving a high-efficiency, precise and safe ferroptosis therapy.

Modulation of electronic structure of Ni3S2 via Fe and Mo co-doping to enhance the bifunctional electrocatalytic activities for HER and OER.

Heazlewoodite nickel sulfide (Ni3S2) is advocated as a promising nonnoble catalyst for electrochemical water splitting because of its unique structure configuration and high conductivity. However, the low active sites and strong sulfur-hydrogen bonds (S-Hads) formed on Ni3S2 surface greatly inhibit the desorption of Hads and reduce the hydrogen and oxygen evolution reaction (HER and OER) activity. Doping is a valid strategy to stimulate the intrinsic catalytic activity of pristine Ni3S2 via modifying the active site. Herein, the Ni foam supported Fe and Mo co-doped Ni3S2 electrocatalysts (Fe-MoS2/Ni3S2@NF) have been constructed using Keplerate polyoxomolybdate {Mo72F30} as precursor through a facile hydrothermal process. Experimental results certificate that Fe and Mo co-doping can effectively tune the local electronic structure, facilitate the interfacial electron transfer, and improve the intrinsic activity. Consequently, the Fe-MoS2/Ni3S2@NF display more excellent HER and OER activity than MoS2/Ni3S2@NF and bare Ni3S2@NF by delivering the 10 and 50 mA cm-2 current densities at ultra-low overpotentials of 74/175 and 80/160 mV for HER and OER. Moreover, when coupled in an alkaline electrolyzer, Fe-MoS2/Ni3S2@NF approached the current of 10 mA cm-2 under a cell voltage of 1.60 V and exhibit excellent stability. The strategy to realize tunable catalytic behaviors via foreign metal doping provides a new avenue to optimize the water splitting catalysts.

Intrinsic Elastomer with Remarkable Dielectric Constant via Elastification of Relaxor Ferroelectric Polymer.

High-dielectric-constant elastomers always play a critical role in the development of wearable electronics for actuation, energy storage, and sensing; therefore, there is an urgent need for effective strategies to enhance dielectric constants. The present methods mainly involve adding inorganic or conductive fillers to the polymer elastomers, however, the addition of fillers causes a series of problems, such as large dielectric loss, increased modulus, and deteriorating interface conditions. Here, the elastification of relaxor ferroelectric polymers is investigated through slight cross-linking, aiming to obtain intrinsic elastomers with high-dielectric constants. By cross-linking of the relaxor ferroelectric polymer poly(vinylidene fluoride-ter-trifluoroethylene-ter-chlorofluoroethylene) with a long soft chain cross-linker, a relaxor ferroelectric elastomer with an enhanced dielectric constant is obtained, twice that of the pristine relaxor ferroelectric polymer and surpassing all reported intrinsic elastomers. This elastomer maintains its high-dielectric constant over a wide temperature range and exhibits robust mechanical fatigue resistance, chemical stability, and thermal stability. Moreover, the ferroelectricity of the elastomer remains stable under strains up to 80%. This study offers a simple and effective way to enhance the dielectric constant of intrinsic elastomers, thus facilitating advancements in soft robots, biosensors, and wearable electronics.

Dispersive Fourier transform based dual-comb ranging.

Laser-based light detection and ranging (LIDAR) offers a powerful tool to real-timely map spatial information with exceptional accuracy and owns various applications ranging from industrial manufacturing, and remote sensing, to airborne and in-vehicle missions. Over the past two decades, the rapid advancements of optical frequency combs have ushered in a new era for LIDAR, promoting measurement precision to quantum noise limited level. For comb LIDAR systems, to further improve the comprehensive performances and reconcile inherent conflicts between speed, accuracy, and ambiguity range, innovative demodulation strategies become crucial. Here we report a dispersive Fourier transform (DFT) based LIDAR method utilizing phase-locked Vernier dual soliton laser combs. We demonstrate that after in-line pulse stretching, the delay of the flying pulses can be identified via the DFT-based spectral interferometry instead of temporal interferometry or pulse reconstruction. This enables absolute distance measurements with precision starting from 262 nm in single shot, to 2.8 nm after averaging 1.5 ms, in a non-ambiguity range over 1.7 km. Furthermore, our DFT-based LIDAR method distinctly demonstrates an ability to completely eliminate dead zones. Such an integration of frequency-resolved ultrafast analysis and dual-comb ranging technology may pave a way for the design of future LIDAR systems.

Thymoquinone as an electron transfer mediator to convert Type II photosensitizers to Type I photosensitizers.

The development of Type I photosensitizers (PSs) is of great importance due to the inherent hypoxic intolerance of photodynamic therapy (PDT) in the hypoxic microenvironment. Compared to Type II PSs, Type I PSs are less reported due to the absence of a general molecular design strategy. Herein, we report that the combination of typical Type II PS and natural substrate carvacrol (CA) can significantly facilitate the Type I pathway to efficiently generate superoxide radical (O2-•). Detailed mechanism study suggests that CA is activated into thymoquinone (TQ) by local singlet oxygen generated from the PS upon light irradiation. With TQ as an efficient electron transfer mediator, it promotes the conversion of O2 to O2-• by PS via electron transfer-based Type I pathway. Notably, three classical Type II PSs are employed to demonstrate the universality of the proposed approach. The Type I PDT against S. aureus has been demonstrated under hypoxic conditions in vitro. Furthermore, this coupled photodynamic agent exhibits significant bactericidal activity with an antibacterial rate of 99.6% for the bacterial-infection female mice in the in vivo experiments. Here, we show a simple, effective, and universal method to endow traditional Type II PSs with hypoxic tolerance.

Simulation of the dynamic processes of microplastic suspension and deposition in a lake sediment-water system.

The occurrence of microplastics in aquatic environments has attracted increasing interest from both the public and scientists, especially their migration behaviors. Although several environmental behaviors of microplastics have been studied, the issue of microplastic suspension and deposition in lake sediment-water systems remains to be elucidated. In this study, we built an indoor sediment-water system with input and output rivers that simulated the actual situations in lakes, and aimed to explore the suspension and deposition behavior of microplastics using eight group experiments. The abundance of microplastics in overlying water and sediments in different periods was analyzed, and the characteristics of hydrodynamic disturbance on microplastic suspension and deposition were identified. Importantly, the exchange of microplastics in sediments and water under dynamic flow conditions was assessed. The results showed that the middle-scale experiment designed in this study effectively simulated the dynamic transport process of microplastics in lakes, and the hydrodynamic force had a significant impact on the suspension and deposition behaviors of microplastics. The average abundance of polystyrene, polyethylene terephthalate and polyamide microplastics was 1.07, 0.60 and 0.83 particles/L in overlying water during the suspension experiments, respectively. This showed a pattern of first rising and then falling with the extension of suspension time. Even in the environment with the maximum input water volume (8000 ml/min) in this study, only microplastics at a depth of 0 to 2 cm from the sediment were suspended. The average abundance of microplastics was 313.02 particles/kg during the deposition experiments, which gradually increased with the extension of deposition time in sediments. Finally, microplastic sizes in water of the suspension experiments and in sediments of the deposition experiments were concentrated in the range of 500 to 1500 µm and 300 to 1000 µm, respectively.

Rhein inhibits M1 polarization of BV2 microglia through MAPK/IκB signalling pathway and reduces neurotoxicity caused by neuroinflammation.

BACKGROUND: Rhein is an anthraquinone compound with anti-inflammatory pharmacological activity. It has been found to play a neuroprotective role in neurological diseases, but the neuroprotective mechanism of rhein remains unclear. METHODS: SH-SY5Y cells serving as neuron-like cells and BV2 microglia were used. The toxicity of rhein on BV2 microglia and the viability of SH-SY5Y cells were measured by CCK-8 assay. The mRNA expression and secretion of pro-inflammatory cytokines were detected by qPCR and ELISA. Iba1, CD86 and pathway signalling protein in BV2 microglia were assessed by Western blot and immunofluorescence. Apoptosis of SH-SY5Y cells exposed to neuroinflammation was analysed through flow cytometry. RESULTS: Rhein inhibited MAPK/IκB signalling pathways. Further studies revealed that rhein inhibited the production of pro-inflammatory cytokines TNF-α, IL-6, IL-1ß and iNOS in BV2 cells and also inhibited the expression of M1 polarization markers Iba1 and CD86 in BV2 cells. Furthermore, rhein reduced the apoptotic rate and restored cell viability of SH-SY5Y cells exposed to neuroinflammation. CONCLUSIONS: Our study demonstrated that rhein inhibited microglia M1 polarization via MAPK/IκB signalling pathway and protected nerve cells through suppressing neuroinflammation.

Programmable Singlet Oxygen Battery for Automated Photodynamic Therapy Enabled by Pyridone-Pyridine Tautomer Engineering.

The efficacy of photodynamic therapy is hindered by the hypoxic environment in tumors and limited light penetration depth. The singlet oxygen battery (SOB) has emerged as a promising solution, enabling oxygen- and light-independent 1O2 release. However, conventional SOB systems typically exhibit an "always-ON" 1O2 release, leading to potential 1O2 leakage before and after treatment. This not only compromises therapeutic outcomes but also raises substantial biosafety concerns. In this work, we introduce a programmable singlet oxygen battery, engineered to address all the issues discussed above. The concept is illustrated through the development of a tumor-microenvironment-responsive pyridone-pyridine switch, PyAce, which exists in two tautomeric forms: PyAce-0 (pyridine) and PyAce (pyridone) with different 1O2 storage half-lives. In its native state, PyAce remains in the pyridone form, capable of storing 1O2 (t1/2 = 18.5 h). Upon reaching the tumor microenvironment, PyAce is switched to the pyridine form, facilitating rapid and thorough 1O2 release (t1/2 = 16 min), followed by quenched 1O2 release post-therapy. This mechanism ensures suppressed 1O2 production pre- and post-therapy with selective and rapid 1O2 release at the tumor site, maximizing therapeutic efficacy while minimizing side effects. The achieved "OFF-ON-OFF" 1O2 therapy showed high spatiotemporal selectivity and was independent of the oxygen supply and light illumination.

Probiotic intervention improves metabolic outcomes in gestational diabetes mellitus: A meta-analysis of randomized controlled trials.

AIMS: To conduct a randomized controlled trial meta-analysis and provide concise and specific recommendations for clinical practice optimization of gestational diabetes for probiotics. METHODS: Up until May 2023, we conducted a thorough, systematic search of PubMed, Cochrane Central Controlled Trials, and Embase. Stata software was used to merge the resulting data from the original studies. Cochran's Q and the I2 statistics were used to evaluate and quantify heterogeneity. The GRADE method was used to evaluate the overall quality of the evidence. Sources of heterogeneity were analyzed through a leave-one-out meta-analysis, a Galbraith plot, and a subgroup analysis. RESULTS: A meta-analysis of 11 randomized controlled trials with a total of 713 participants was finally conducted. Our findings indicated the administration of probiotics at a median dosage of 6 × 109 CFU/day led to a substantial improvement in fasting glucose levels (MD: -4.16 mg/dL [95% CI: -6.78, -1.54]; P < 0.001), fasting insulin levels (MD: -3.33 µIU/ml [95% CI: -4.92, -1.74]; P < 0.001), homeostatic model assessment for insulin resistance (HOMA-IR) (MD: -0.71 [95% CI: -0.97, -0.45]; P < 0.001), and quantitative insulin sensitivity check index (QUICKI) (MD: 0.01 [95% CI: 0.01, 0.02]; P < 0.001). Subgroup analysis indicated that probiotic intervention exerted a more significant reduction in fasting blood glucose in patients with higher baseline BMI and glucose levels, and reduced fasting insulin more markedly in those with elevated baseline insulin. According to the GRADE assessment, the quality of evidence for fasting blood glucose and QUICKI was rated as "high", while the quality for fasting insulin and HOMA-IR was rated as "moderate". CONCLUSIONS: Probiotic intervention has been shown to significantly decrease levels of fasting blood glucose, fasting insulin, and HOMA-IR, while elevating QUICKI levels in patients with GDM, underscoring the potential utility of probiotics in the adjunctive management of GDM.

A back propagation neural network based respiratory motion modelling method.

BACKGROUND: This study presents the development of a backpropagation neural network-based respiratory motion modelling method (BP-RMM) for precisely tracking arbitrary points within lung tissue throughout free respiration, encompassing deep inspiration and expiration phases. METHODS: Internal and external respiratory data from four-dimensional computed tomography (4DCT) are processed using various artificial intelligence algorithms. Data augmentation through polynomial interpolation is employed to enhance dataset robustness. A BP neural network is then constructed to comprehensively track lung tissue movement. RESULTS: The BP-RMM demonstrates promising accuracy. In cases from the public 4DCT dataset, the average target registration error (TRE) between authentic deep respiration phases and those forecasted by BP-RMM for 75 marked points is 1.819 mm. Notably, TRE for normal respiration phases is significantly lower, with a minimum error of 0.511 mm. CONCLUSIONS: The proposed method is validated for its high accuracy and robustness, establishing it as a promising tool for surgical navigation within the lung.

Improved motion correction in brain MRI using 3D radial trajectory and projection moment analysis.

PURPOSE: To develop a generalized rigid body motion correction method in 3D radial brain MRI to deal with continuous motion pattern through projection moment analysis. METHODS: An assumption was made that the multichannel coil moves with the head, which was achieved by using a flexible head coil. A two-step motion correction scheme was proposed to directly extract the motion parameters from the acquired k-space data using the analysis of center-of-mass with high noise robustness, which were used for retrospective motion correction. A recursive least-squares model was introduced to recursively estimate the motion parameters for every single spoke, which used the smoothness of motion and resulted in high temporal resolution and low computational cost. Five volunteers were scanned at 3 T using a 3D radial multidimensional golden-means trajectory with instructed motion patterns. The performance was tested through both simulation and in vivo experiments. Quantitative image quality metrics were calculated for comparison. RESULTS: The proposed method showed good accuracy and precision in both translation and rotation estimation. A better result was achieved using the proposed two-step correction compared to traditional one-step correction without significantly increasing computation time. Retrospective correction showed substantial improvements in image quality among all scans, even for stationary scans. CONCLUSIONS: The proposed method provides an easy, robust, and time-efficient tool for motion correction in brain MRI, which may benefit clinical diagnosis of uncooperative patients as well as scientific MRI researches.

[Hip joint biomechanical analysis of the acetabular anatomical reconstruction and nonanatomical reconstruction in total hip arthroplasty for Crowe type â ¢ developmental dysplasia of the hip by finite element method].

OBJECTIVE: To analyze the hip joint biomechanics of the acetabular anatomical reconstruction and nonanatomical reconstruction in total hip arthroplasty (THA) for Crowe type Ⅲ developmental dysplasia of the hip (DDH) by finite element method, which provided theoretical foundation and experimental basis for the anatomical acetabular reconstruction during THA in clinical practice. METHODS: One patient with left end-stage hip arthritis secondary to Crowe type Ⅲ DDH was selected in this study, who underwent total hip arthroplasty in the orthopedic department of the First Affiliated Hospital of Bengbu Medical College in April 2020. This patient was female, 57 years old. The preoperative and postoperative three dimentional CT scan of the patient's pelvis were performed. Fourteen acetabular cup models with different anteversion, inclination and rotation center height were established in Mimics and 3-Matic software. The boundary and load conditions were set in Abaqus software. The Von Mises and stress distribution of the hip joint were calculated and observed. RESULTS: In the Crowe type Ⅲ DDH THA, if the hip rotation center was restored anatomically and the acetabular cup's inclination was set as 40°, the cup's anteversion varied from 5° to 25°, the lowest Von Mises value of acetabular cup and polyethylene liner occured in 20°anteversioin;if the hip rotation center was restored anatomically and the acetabular cup's anteversion was set as 15°, the cup's inclination varied from 35° to 55°, the lowest Von Mises value of acetabular cup and polyethylene liner occured in 35° inclination;if the acetabular cup's anteversion and inclination were set as 15°and 40°respectively, the up migration of hip rotaion center varied from 0 mm to 20 mm, the lowest Von Mises value of acetabular cup and polyethylene liner occured in 10 mm up migration. In all fourteen models, the Von Mises value of the acetabulum, acetabulum cup and polyethylene liner were lowest when the acetabular cup's anteversion and inlcination were 15°, 35° respectively, as well as the rotation center was restored anatomically. CONCLUSION: In total hip arthroplasty for Crowe type Ⅲ DDH, the anatomical restoration of hip rotation center with 15° anteversion and 35° inclination of the acetabular cup are suggested, bone graft above the acetabular cup and additional screws are recommended simultaneously to further reduce the Von Mises of hip joint.

An inorganic-blended p-type semiconductor with robust electrical and mechanical properties.

Inorganic semiconductors typically have limited p-type behavior due to the scarcity of holes and the localized valence band maximum, hindering the progress of complementary devices and circuits. In this work, we propose an inorganic blending strategy to activate the hole-transporting character in an inorganic semiconductor compound, namely tellurium-selenium-oxygen (TeSeO). By rationally combining intrinsic p-type semimetal, semiconductor, and wide-bandgap semiconductor into a single compound, the TeSeO system displays tunable bandgaps ranging from 0.7 to 2.2 eV. Wafer-scale ultrathin TeSeO films, which can be deposited at room temperature, display high hole field-effect mobility of 48.5 cm2/(Vs) and robust hole transport properties, facilitated by Te-Te (Se) portions and O-Te-O portions, respectively. The nanosphere lithography process is employed to create nanopatterned honeycomb TeSeO broadband photodetectors, demonstrating a high responsibility of 603 A/W, an ultrafast response of 5 µs, and superior mechanical flexibility. The p-type TeSeO system is highly adaptable, scalable, and reliable, which can address emerging technological needs that current semiconductor solutions may not fulfill.

Risk factors for suspected pulmonary embolism in children: Complication of Mycoplasma pneumoniae pneumonia.

PURPOSE: Pulmonary embolism (PE) is not a rare complication of Mycoplasma pneumoniae pneumonia (MPP) in children. We sought to determine the incidence of PE in children with MPP who underwent clinically indicated CT pulmonary angiography (CTPA) and to evaluate the risk factors for PE. METHODS: All 106 children with MPP who were clinically suspected of having PE and who underwent CTPA were retrospectively enrolled from June 2018 to December 2021. The clinical features, laboratory data, and radiological parameters were recorded (e.g., lung consolidation involved and the Qanadli score). A Cox proportional hazards model and area under the receiver operating characteristic (ROC) curve were used to evaluate the risk factors and prognostic discriminatory capacity for PE. RESULTS: PE was detected in 26 of 106 (24.5 %) children (mean age, 6.2 years ± 3.3 years; 53 boys). Sixteen of the 26 (61.5 %) children with PE were boys. The mean age of the children with PE was 8.1 ± 2.9 years, and the mean Qanadli score was 15.3 ± 10.2. Children with PE had higher D-dimer levels (9.3 ± 7.1 mg/Lvs. 3.6 ± 3.8 mg/L) and a greater frequency of lung lobe consolidation (25 (96.2 %) vs. 64 (80.0 %)) (all P < 0.05). For children with MPP, age (hazard ratio (HR) = 1.96 (95 % CI1.04, 3.71; P = 0.037), D-dimer level (HR = 1.52, 95 % CI: 1.03, 2.24; P = 0.029), and bilateral lung consolidation (HR = 2.41, 95 % CI: 1.03, 5.58; P = 0.043) were found to be independent predictors of PE. CONCLUSION: Clinical and CT radiological predictors could be used to predict PE in children with MPP. The use of risk factor assessment as a tool has the potential to guide more appropriate use of CTPA in children.

Nitrification inhibitor chlorate and nitrogen substrates differentially affect comammox Nitrospira in a grassland soil.

Introduction: Through the combined use of two nitrification inhibitors, Dicyandiamide (DCD) and chlorate with nitrogen amendment, this study aimed to investigate the contribution of comammox Nitrospira clade B, ammonia oxidizing bacteria (AOB) and archaea (AOA) to nitrification in a high fertility grassland soil, in a 90-day incubation study. Methods: The soil was treated with nitrogen (N) at three levels: 0 mg-N kg-1 soil, 50 mg-N kg-1 soil, and 700 mg-N kg-1 soil, with or without the two nitrification inhibitors. The abundance of comammox Nitrospira, AOA, AOB, and nitrite oxidising bacteria (NOB) was measured using qPCR. The comammox Nitrospira community structure was assessed using Illumina sequencing. Results and Discussion: The results showed that the application of chlorate inhibited the oxidation of both NH4+ and NO2- in all three nitrogen treatments. The application of chlorate significantly reduced the abundance of comammox Nitrospira amoA and nxrB genes across the 90-day experimental period. Chlorate also had a significant effect on the beta diversity (Bray-Curtis dissimilarity) of the comammox Nitrospira clade B community. Whilst AOB grew in response to the N substrate additions and were inhibited by both inhibitors, AOA showed litle or no response to either the N substrate or inhibitor treatments. In contrast, comammox Nitrospira clade B were inhibited by the high ammonium concentrations released from the urine substrates. These results demonstrate the differential and niche responses of the three ammonia oxidising communities to N substrate additions and nitrification inhibitor treatments. Further research is needed to investigate the specificity of the two inhibitors on the different ammonia oxidising communities.

Young patient with a giant gastric bronchogenic cyst: A case report and review of literature.

BACKGROUND: Gastric bronchogenic cysts (BCs) are extremely rare cystic masses caused by abnormal development of the respiratory system during the embryonic period. Gastric bronchial cysts are rare lesions that were first reported in 1956; as of 2023, only 33 cases are available in the PubMed online database. BCs usually have no clinical symptoms in the early stage, and imaging findings also lack specificity. Therefore, they are difficult to diagnose before histopathological examination. CASE SUMMARY: A 34-year-old woman with respiratory distress presented at our hospital. Endoscopic ultrasound revealed an anechoic mass between the spleen, left kidney and gastric fundus, with hyperechogenic and soft elastography textures and with a size of approximately 6.5 cm × 4.0 cm. Furthermore, a computed tomography scan demonstrated high density between the posterior stomach and the spleen and the left kidney, with uniform internal density and a small amount of calcification. The maximum cross section was approximately 10.1 cm × 6.1 cm, and the possibility of a cyst was high. Because the imaging findings did not suggest a malignancy and because the patient required complete resection, she underwent laparotomy surgery. Intraoperatively, this cystic lesion was found to be located in the posterior wall of the large curvature of the fundus and was approximately 8 cm × 6 cm in size. Finally, the pathologists verified that the cyst in the fundus was a gastric BC. The patient recovered well, her symptoms of chest tightness disappeared, and the abdominal drain was removed on postoperative day 6, after which she was discharged on day 7 for 6 months of follow-up. She had no tumor recurrence or postoperative complications during the follow-up. CONCLUSION: This is a valuable report as it describes an extremely rare case of gastric BC. Moreover, this was a very young patient with a large BC in the stomach.

An fNIRS dataset for driving risk cognition of passengers in highly automated driving scenarios.

For highly autonomous vehicles, human does not need to operate continuously vehicles. The brain-computer interface system in autonomous vehicles will highly depend on the brain states of passengers rather than those of human drivers. It is a meaningful and vital choice to translate the mental activities of human beings, essentially playing the role of advanced sensors, into safe driving. Quantifying the driving risk cognition of passengers is a basic step toward this end. This study reports the creation of an fNIRS dataset focusing on the prefrontal cortex activity in fourteen types of highly automated driving scenarios. This dataset considers age, sex and driving experience factors and contains the data collected from an 8-channel fNIRS device and the data of driving scenarios. The dataset provides data support for distinguishing the driving risk in highly automated driving scenarios via brain-computer interface systems, and it also provides the possibility of preventing potential hazards in some scenarios, in which risk remains at a high value for an extended period, before hazard occurs.

Ultraconformal Skin-Interfaced Sensing Platform for Motion Artifact-Free Monitoring.

Capable of directly capturing various physiological signals from human skin, skin-interfaced bioelectronics has emerged as a promising option for human health monitoring. However, the accuracy and reliability of the measured signals can be greatly affected by body movements or skin deformations (e.g., stretching, wrinkling, and compression). This study presents an ultraconformal, motion artifact-free, and multifunctional skin bioelectronic sensing platform fabricated by a simple and user-friendly laser patterning approach for sensing high-quality human physiological data. The highly conductive membrane based on the room-temperature coalesced Ag/Cu@Cu core-shell nanoparticles in a mixed solution of polymers can partially dissolve and locally deform in the presence of water to form conformal contact with the skin. The resulting sensors to capture improved electrophysiological signals upon various skin deformations and other biophysical signals provide an effective means to monitor health conditions and create human-machine interfaces. The highly conductive and stretchable membrane can also be used as interconnects to connect commercial off-the-shelf chips to allow extended functionalities, and the proof-of-concept demonstration is highlighted in an integrated pulse oximeter. The easy-to-remove feature of the resulting device with water further allows the device to be applied on delicate skin, such as the infant and elderly.