ABSTRACT
Spent phosphor is an important secondary resource for extracting rare earth elements. Microwave absorption properties and enhanced extraction of Eu from blue phosphor by microwave alkali roasting were studied. Dielectric properties of alkali roasting system were measured by resonator perturbation method. Dielectric constant increases linearly from 250 °C until it reaches a peak at 400 °C. The dielectric loss reaches a higher value at 400-550 °C, due to the strong microwave absorption properties of molten alkali and roasted products. Effects of roasting temperature, roasting time and alkali addition amount on Eu leaching were investigated. The phosphor was completely decomposed into Eu2O3, BaCO3 and MgO at 400 °C. The alkaline decomposition process of phosphor is more consistent with diffusion control model with Eα being 28.9 kJ/mol. Effects of the main leaching conditions on Eu leaching were investigated. The leaching kinetic of Eu was in line with diffusion control model with Eα being 5.74 kJ/mol. The leaching rules of rare earths in the mixed phosphor were studied. The results showed that the presence of red and green phosphor affected the recovery of blue phosphor. The optimum process parameters of rare earth recovery in single blue phosphor and mixed phosphor were obtained, and the recovery of Eu were 97.81% and 94.80%, respectively. Microwave alkali roasting promoted the dissociation of phosphor and leaching of rare earths. The results can provide reference for the efficient and selective recovery of rare earths in phosphors.
Subject(s)
Alkalies , Metals, Rare Earth , Microwaves , Metals, Rare Earth/chemistry , Alkalies/chemistry , Europium/chemistry , Recycling , Phosphorus/chemistryABSTRACT
In this study, we developed dry, flat potato starch noodles with an ideal taste and low digestibility. Peanut oligopeptide and potato starch were combined to form dry, flat potato starch noodles containing different peanut oligopeptide contents using a steam-slice method. Adding 5 % and 10 % peanut oligopeptides maintained the dry, flat starch noodles' quality. Scanning electron microscopy (SEM) analysis showed that dry, flat starch noodles containing peanut oligopeptides had more pores with pore sizes ranging from 0.30 µm to 2.00 µm. X-ray diffraction (XRD) results showed that peanut oligopeptide promoted the recrystallization of amylopectin during the retrogradation process after gelatinization, and the crystallinity of noodles ranged from 4.31 % (control noodles) to 18.24 % (noodles containing 10 % peanut oligopeptides). An in vitro simulated digestion test showed that the slowly digestible starch and resistant starch contents of noodles containing 10 % peanut oligopeptides were 18.24 % and 22.03 %-significantly higher than control starch noodles (14.88 % and 9.9 %, respectively). Therefore, when peanut oligopeptides were added to dry, flat starch noodles, it was a promising material for lowering blood sugar levels after meals.
Subject(s)
Arachis , Solanum tuberosum , Solanum tuberosum/chemistry , Starch/chemistry , Flour/analysis , OligopeptidesABSTRACT
Background: Mandibular defects can result from congenital deformities, trauma, tumor resection, and osteomyelitis. The shape was irregular because the lower jaw was radians. This involves teeth and jaw functions; therefore, the difficulty of bone repair is greater than that in other body parts. Several standard treatments are available, but they result in various problems, such as difficulties in skin flap transplantation and possible zone dysfunction, artificial material boneless combining ability, and a long treatment period. This study aimed to introduce the present status of research on mandibular defects to analyze the current introduction and predict future research trends through a bibliometric study. Methods: From 2001 to 2021, publications on mandibular defects were collected for bibliometric visualization using VOSviewer, CiteSpace, and Scimago Graphica software based on the Web of Science Core Collection. Results: This study analyzed 4,377 articles, including 1,080 published in the United States, 563 in China, and 359 in Germany, with an increase in the number of articles published over the past 20 years. Wikesjoe and Ulf Mai E had the most publications (p = 36) and citations (citations = 1,553). Shanghai Jiaotong University published the highest number of papers among the research institutions (p = 88). The most productive journal was Journal of Oral and Maxillofacial Surgery, and the cited literature was primarily classified as dentistry, dermatology, and surgery. Cluster Analysis of Co-occurrence Keywords revealed that highest number of core words were mandibular defects, mandibular reconstruction, and bone regeneration. The highest cited words were head and neck cancer, accuracy, and osteogenic differentiation. High-frequency terms of Cluster Analysis of References were osteosynthesis plate, tissue engineering, and rapid distraction rate. Conclusion: Over the past 20 years, the number of studies on mandibular defects has gradually increased. New surgical procedures are increasingly being used in clinical practice. Current frontier topics mainly focus on areas such as computer-aided design, 3D printing of osteotomy and reconstruction guide plates, virtual surgical planning, and bone tissue engineering.
ABSTRACT
Coronavirus disease 2019 (COVID-19) is a global pandemic that has caused severe health threats and fatalities in almost all communities. Studies have detected severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in saliva with a viral load that lasts for a long period. However, researchers are yet to establish whether SARS-CoV-2 can directly enter the salivary glands. Therefore, this study aimed to assess the presence of angiotensin-converting enzyme 2 (ACE2)/transmembrane serine proteases 2 (TMPRSS2) expression in salivary glands using publicly available databases. The distribution of ACE2 and TMPRSSs family in salivary gland tissue and other tissues was analyzed. The Genotype-Tissue Expression dataset was employed to explore the ACE2 and TMPRSS2 expression in various body organs and salivary glands in a healthy population. The single-cell sequencing data for salivary gland samples (including submandibular salivary gland and parotid gland) from mice were collected and analyzed. The components and proportions of salivary gland cells expressing the key protease TMPRSSs family were analyzed. Transcriptome data analysis showed that ACE2 and TMPRSS2 were expressed in salivary glands. The expression levels of ACE2 and TMPRSS2 were marginal without significant differences in different age groups or between men and women. Single-cell RNA sequence analysis indicated that TMPRSS2 was mainly expressed in salivary gland epithelial cells. We speculate that SARS-CoV-2 may be entered in salivary glands.
Subject(s)
Angiotensin-Converting Enzyme 2/genetics , COVID-19/transmission , Peptidyl-Dipeptidase A/genetics , Salivary Glands/virology , Serine Endopeptidases/genetics , Adult , Age Factors , Animals , COVID-19/virology , Computational Biology , Correlation of Data , Databases, Factual , Female , Humans , Male , Mice , Middle Aged , Parotid Gland/virology , SARS-CoV-2/pathogenicity , Sequence Analysis, RNA , Sex Factors , Submandibular Gland/virologyABSTRACT
To better understand the effects of bacteria on the characteristics of Fu brick tea, we investigated bacterial community structure as well as the predicted functions of identified bacteria and their correlations with chemical compounds during the manufacturing process. Overall, Klebsiella species dominated during the initial stage of processing, but were quickly replaced by Pseudomonas, Lactococcus, Stenotrophomonas, Enterococcus, and Bacillus species, which remained stable until the end of the manufacturing process. Network analysis identified 11 bacterial genera as keystone taxa, which contributed to the stabilization of the microbial community in the co-occurrence network. Bacterial taxa were grouped into eight modules, with the dominant genera mainly distributed amongst modules I and â ¥, which were involved in metabolism of carbon and flavor compounds in the Fu brick tea ecosystem. Using bidirectional orthogonal partial least squares analysis, 19 bacterial genera were identified as core functional genera linked to the metabolism of chemical compounds during the manufacturing process, while three genera, namely Klebsiella, Lactococcus, and Bacillus, also dominated the Fu brick tea fermentation process. These findings provide new insights into Fu Brick tea bacterial community variation and increased our understanding of the core functional bacterial genera involved in the manufacture of Fu brick tea.
Subject(s)
Bacteria/classification , Bacteria/metabolism , Food Handling , Food Microbiology , Microbiota , Tea/microbiology , Bacteria/genetics , Bacteria/isolation & purification , Biodiversity , Carbon/metabolism , DNA, Bacterial/genetics , Fermentation , RNA, Ribosomal, 16S/genetics , Sequence Analysis, DNA , Volatile Organic Compounds/metabolismABSTRACT
Primary dark tea is used as raw material for compressed dark tea, such as Fu brick tea, Hei brick tea, Hua brick tea, and Qianliang tea. Pile-fermentation is the key process for the formation of the characteristic properties of primary dark tea, during which the microorganism plays an important role. In this study, the changes of major chemical compounds, enzyme activities, microbial diversity, and their correlations were explored during the pile-fermentation process. Our chemical and enzymatic analysis showed that the contents of the major compounds were decreased, while the activities of polyphenol oxidase, cellulase, and pectinase were increased during this process, except peroxidase activity that could not be generated from microbial communities in primary dark tea. The genera Cyberlindnera, Aspergillus, Uwebraunia, and Unclassified Pleosporales of fungus and Klebsiella, Lactobacillus of bacteria were predominant in the early stage of the process, but only Cyberlindnera and Klebsiella were still dominated in the late stage and maintained a relatively constant until the end of the process. The amino acid was identified as the important abiotic factor in shaping the microbial community structure of primary dark tea ecosystem. Network analysis revealed that the microbial taxa were grouped into five modules and seven keystone taxa were identified. Most of the dominant genera were mainly distributed into module III, which indicated that this module was important for the pile-fermentation process of primary dark tea. In addition, bidirectional orthogonal partial least squares (O2PLS) analysis revealed that the fungi made more contributions to the formation of the characteristic properties of primary dark tea than bacteria during the pile-fermentation process. Furthermore, 10 microbial genera including Cyberlindnera, Aspergillus, Eurotium, Uwebraunia, Debaryomyces, Lophiostoma, Peltaster, Klebsiella, Aurantimonas, and Methylobacterium were identified as core functional genera for the pile-fermentation of primary dark tea. This study provides useful information for improving our understanding on the formation mechanism of the characteristic properties of primary dark tea during the pile-fermentation process.
ABSTRACT
Fu brick tea is a unique post-fermented tea product which is fermented with microorganism during the manufacturing process. Metabolic analysis showed that most metabolites content were decreased during the manufacturing process of Fu brick tea, except GA (gallic acid). Illumina MiSeq sequencing of ITS gene amplicons was applied to analyze the fungal community succession. The genera Aspergillus, Cyberlindnera and Candida were predominant at the early stage of manufacturing process (from "primary dark tea" to "fermentation for 3 days"), but after the stage of "fermentation for 3 days" only Aspergillus was still dominated, and maintain a relatively constant until to the end of manufacturing process. The effects of metabolites on the structure of the fungal community were analyzed by redundancy analysis (RDA) and variation partitioning analysis (VPA). The results indicated that GCG (gallocatechin gallate), EGCG (epigallocatechin gallate) and GA as well as the interactions among them were the most probably ones to influence, or be influenced by the fungal communities during the fermentation process of Fu brick tea. This study revealed fungal succession, metabolite changes and their relationships, provided new insights into the mechanisms for manufacturing process of Fu brick tea.
Subject(s)
Fungi/classification , Metabolomics/methods , Sequence Analysis, DNA/methods , Tea/microbiology , Catechin/analogs & derivatives , Catechin/analysis , Catechin/pharmacology , DNA, Fungal/analysis , Fermentation , Food Industry , Fungi/genetics , Fungi/growth & development , Gallic Acid/analysis , Gallic Acid/pharmacology , High-Throughput Nucleotide Sequencing , Tea/chemistryABSTRACT
BACKGROUND: The administration of different doses of parathyroid hormone to promote mandibular distraction osteogenesis remains unclear. The objective of the present study was to examine the effects of recombinant human parathyroid hormone on new bone formation during mandibular distraction osteogenesis and to investigate the dose-effect relationship associated with this phenomenon. METHODS: A total of 45 rabbits were used to establish the mandibular distraction osteogenesis model. The rabbits were divided into a control group (that received a subcutaneous injection of 1 ml of saline every other day) and experimental groups A, B, C, and D (that received subcutaneous injections of 10, 20, 30, and 40 µg/kg of recombinant human parathyroid hormone, respectively, every other day). On days 1, 7, and 14 of the consolidation period after the distraction had been completed, new bone in the distraction region was examined through histomorphometric investigation and bone mineral density testing. RESULTS: On days 1, 7, and 14 of the fixation period, the number of osteoblasts, trabecular bone area, and bone mineral density were greater in each experimental group than in the control group. On day 1 of the consolidation period, group C featured the highest average number of osteoblasts. On day 14 of the consolidation period, group C exhibited the highest bone mineral densities and largest trabecular bone areas. CONCLUSIONS: Intermittent subcutaneous injections of recombinant human parathyroid hormone can promote new bone formation during mandibular distraction osteogenesis. Different doses of recombinant human parathyroid hormone promoted mandibular distraction osteogenesis to differing extents.