Clarifying urban flood response characteristics and improving interpretable flood prediction with sparse data considering the coupling effect of rainfall and drainage pipeline siltation.

With climate warming and accelerated urbanisation, severe urban flooding has become a common problem worldwide. Frequent extreme rainfall events and the siltation of drainage pipes further increase the burden on urban drainage networks. However, existing studies have not fully considered the effects of rainfall and pipeline siltation on the response characteristics of flooding when constructing numerical models of urban flooding simulations. To solve this problem, a surface-subsurface coupling model was constructed by combining the Saint-Venant equation, Manning equation, a one-dimensional pipeline model (SWMM), and a two-dimensional surface overflow model (LISFLOOD-FP). Then, the SWMM model considering pipeline siltation and the two-dimensional surface overflow model (LISFLOOD-FP) were coupled with the flow exchange governing equation, and the urban flooding response characteristics considering the coupling effect of "rainfall and drainage pipeline siltation" were analysed. To enhance the solvability of waterlogging prediction, an intelligent prediction model of urban flooding based on Bayes-CNN-BLSTM was established by combining a convolutional neural network (CNN), bidirectional long short-term memory neural network (BLSTM), Bayesian optimisation (Bayes), and an interpretable loss function error correction method. The actual rainfall events and flooding processes recorded by the monitoring equipment at Huizhou University were used to calibrate and verify the model. The results show that in the Rainfall 1 and Rainfall 2 scenarios, the overload rates of the pipelines in the current siltation scenario were 60.06 % and 68.37 %, respectively, and the proportions of overflow nodes were 24.87 % and 25.89 %, respectively. When the drainage network was initially put into operation, the overload rates of the pipeline were 36.67 % and 41.16 %, and the overflow nodes accounted for 3.05 % and 4.06 %, respectively. The inundated area and volume of urban flooding increased when the combined siltation coefficient (CSC) was 0.2; therefore, two desilting schemes were determined. Under Rainfall 1, Rainfall 2, and the four rainfall recurrence periods, the Bayes-CNN-BLSTM model had clear advantages in terms of accuracy, reliability, and robustness.

Transcriptome analysis of Scylla paramamosain hepatopancreas response to mud crab dicistrovirus-1 infection.

Scylla paramamosain, an economically significant crab, is widely cultivated worldwide. In recent years, S. paramamosain has faced a serious threat from viral diseases due to the expansion of culture scale and increased culture density. Among these, mud crab dicistrovirus-1 (MCDV-1) stands out as highly pathogenic, presenting substantial challenges to the healthy development of mud crab aquaculture. Therefore, a comprehensive understanding of the mud crab immune response to MCDV-1 infection is imperative for devising effective disease prevention strategies. In this study, transcriptomic analyses were conducted on the hepatopancreas of mud crabs infected with MCDV-1. The findings revealed a total of 5139 differentially expressed genes (DEGs) between healthy and MCDV-1 infected mud crabs, including 3327 upregulated and 1812 downregulated DEGs. Further analysis showed that mud crabs resist MCDV-1 infection by activating humoral immune-related pathways, including the MAPK signaling pathway, MAPK signaling pathway-fly, and Toll and Imd signaling pathway. In contrast, MCDV-1 infection triggers host metabolic disorders. Several immune-related vitamin metabolism pathways (ascorbate and aldarate metabolism, retinol metabolism, and nicotinate and nicotinamide metabolism) were significantly inhibited, which may create favorable conditions for the virus's self-replication. Notably, endocytosis emerged as significantly upregulated both in GO terms and KEGG pathways, with several viral endocytosis-related pathways showing significant activation. PPI network analysis identified 9 hub genes associated with viral endocytosis within the endocytosis. Subsequent GeneMANIA analysis confirmed the association of these hub genes with viral endocytosis. Both transcriptome data and qPCR analysis revealed a significant upregulation of these hub genes post MCDV-1 infection, suggesting MCDV-1 may use viral endocytosis to enter cells and facilitate replication. This study represents the first comprehensive report on the transcriptomic profile of mud crab hepatopancreas response to MCDV-1 infection. Future investigations should focus on elucidating the mechanisms through which MCDV-1 enters cells via endocytosis, as this may holds critical implications for the development of vaccine targets.

Dynamic Ultrastrong Coupling in a 2 nm Gap Plasmonic Cavity at the Sub-Picosecond Scale.

Localized surface plasmon resonances (LSPRs) can enhance the electromagnetic fields on metallic nanostructures upon light illumination, providing an approach for manipulating light-matter interactions at the sub-wavelength scale. However, currently, there is no thorough investigation of the physical mechanism in the dynamic formation of the strongly coupled LSPRs on sub-5 nm plasmonic cavities at the sub-picosecond scale. In this work, through femtosecond broadband transient absorption spectroscopy, we reveal the dynamic ultrastrong coupling processes in a nanoparticle-in-trench (NPiT) structure containing 2 nm gap cavities, and demonstrate a coherent motional coupling between vibrating AuNPs and the nanogaps. We achieve a maximum Rabi splitting energy of ∼660 meV in the sub-picosecond hot-electron relaxation time scale under the resonant excitation of the nanogap cavity's LSPR, reaching the ultrastrong coupling regime. This leads to a change of global vibration modes for the 2 nm gap cavity, potentially related to the dynamical Casimir effect with nanogap resonators.

Identification and functional characterization of laminin receptor in the mud crab, Scylla paramamosain, in response to MCDV-1 challenge.

Laminin receptor (LR), which mediating cell adhesion to the extracellular matrix, plays a crucial role in cell signaling and regulatory functions. In the present study, a laminin receptor gene (SpLR) was cloned and characterized from the mud crab (Scylla paramamosain). The full length of SpLR contained an open reading frame (ORF) of 960 bp encoding 319 amino acids, a 5' untranslated region (UTR) of 66 bp and a 3' UTR of 49 bp. The predicted protein comprised two Ribosomal-S2 domains and a 40S-SA-C domain. The mRNA of SpLR was highly expressed in the gill, followed by the hepatopancreas. The expression of SpLR was up-regulated after mud crab dicistrovirus-1(MCDV-1) infection. Knocking down SpLR in vivo by RNA interference significantly down-regulated the expression of the immune genes SpJAK, SpSTAT, SpToll1, SpALF1 and SpALF5. This study shown that the expression level of SpToll1 and SpCAM in SpLR-interfered group significantly increased after MCDV-1 infection. Moreover, silencing of SpLR in vivo decreased the MCDV-1 replication and increased the survival rate of mud crabs after MCDV-1 infection. These findings collectively suggest a pivotal role for SpLR in the mud crab's response to MCDV-1 infection. By influencing the expression of critical innate immune factors and impacting viral replication dynamics, SpLR emerges as a key player in the intricate host-pathogen interaction, providing valuable insights into the molecular mechanisms underlying MCDV-1 pathogenesis in mud crabs.

Identifying symptom clusters and temporal interconnections in patients with lung tumors after CT-guided microwave ablation: A network analysis.

PURPOSE: To explore symptom clusters and interrelationships using a network analysis approach among symptoms in patients with lung tumors who underwent computed tomography (CT)-guided microwave ablation (MWA). METHODS: A longitudinal study was conducted, and 196 lung tumor patients undergoing MWA were recruited and were measured at 24 h, 48 h, and 72 h after MWA. The Chinese version of the MD Anderson Symptom Inventory and the Revised Lung Cancer Module were used to evaluate symptoms. Network analyses were performed to explore the symptom clusters and interrelationships among symptoms. RESULTS: Four stable symptom communities were identified within the networks. Distress, weight loss, and chest tightness were the central symptoms. Distress, and weight loss were also the most key bridge symptoms, followed by cough. Three symptom networks were temporally stable in terms of symptom centrality, global connectivity, and network structure. CONCLUSION: Our findings identified the central symptoms, bridge symptoms, and the stability of symptom networks of patients with lung tumors after MWA. These network results will have important implications for future targeted symptom management intervention development. Future research should focus on developing precise interventions for targeting central symptoms and bridge symptoms to promote patients' health.

Spatiotemporal dual-periodic soliton pulsation in a multimode fiber laser.

Spatiotemporal mode-locked (STML) fiber lasers have become a new platform for investigating nonlinear phenomena. In this work, spatiotemporal dual-periodic soliton pulsation (SDSP) is firstly observed in an STML fiber laser. It is found that in the SDSP, the long-period pulsations (LPPs) of different transverse modes are synchronous, while the short-period pulsations (SPPs) exhibit asynchronous modulations. The numerical simulation confirms the experimental results and further reveals that the proportion of transverse mode components can manipulate the periods of the LPP and SPP but does not affect the synchronous and asynchronous pulsations of different transverse modes. The obtained results bring the study of spatiotemporal dissipative soliton pulsation into the multi-period modulation stage, which helps to understand the complex spatiotemporal dynamics in STML fiber lasers and discover new dynamics in high-dimensional nonlinear systems.

Periodically tunable multimode soliton pulsation in a spatiotemporal mode-locked fiber laser.

Multimode fiber lasers have become a new platform for investigating nonlinear phenomena since the report on spatiotemporal mode-locking. In this work, the multimode soliton pulsation with a tunable period is achieved in a spatiotemporal mode-locked fiber laser. It demonstrates that the pulsation period drops while increasing the pump power. Moreover, it is found that different transverse modes have the same pulsation period, asynchronous pulsation evolution and different dynamical characteristics through the spatial sampling technique and the dispersive Fourier transform technique. To further verify the experimental results, we numerically investigate the influences of the gain and the loss on the pulsation properties. It is found that within a certain parameter range, the pulsation period drops and rises linearly with the increase of the gain and the loss, respectively. The obtained results contribute to understanding the formation and regulating of soliton pulsations in fiber lasers.

Development of a framework to forecast the urban residential building CO2 emission trend and reduction potential to 2060: A case study of Jiangxi province, China.

Investigating the CO2 abatement potential of urban residential building from systematic perspective is essential to reach the urban carbon neutrality target. However, previous studies on building CO2 emission trend forecasting were mainly focused on the building operational phase. In this study, a new framework that includes four building stages under a system dynamic model is developed to simulate urban residential building carbon emission changes and the related reduction potentials under three scenarios in Jiangxi Province up to 2060. Results showed that the overall process carbon emission dynamic had already peaked in 2014 under the three scenarios, with a peak value of 38.52 Mt. It then fell to 9.56 Mt in 2060 under the baseline (BAU) scenario. More importantly, seven carbon abatement measures were adopted during four building activities in this study, and the total carbon reduction was not the sum of the carbon reduction potential of the individual measures. Some carbon abatement strategies displayed synergistic effects such as low-carbon electrification where the combination of electrification and clean energy power generation was the largest contributor to reduced carbon emissions during building operation as a comprehensive carbon reduction measure. By contrast, extending a building's lifetime restrained the carbon abatement potential during the demolition stage, and it inhibited the carbon emission reduction by 24.84 Mt. These results highlight the significant need for effective policy interventions for clean production and the need to improve prefabricated building proportions, promote electrification, improve energy efficiency, strengthen recycling practices, and extend building lifetimes to promote decarbonization of urban residential building system development.

HIF-1-mediated regulation of LDH gene unravels key insights into MCDV-1 pathogenesis in mud crabs Scylla paramamosain.

Hypoxia-inducible factors -1 (HIF-1) is a crucial transcription factor that regulates the expression of glycolytic genes. Our previous study proved that the Mud crab dicistrovirus-1 (MCDV-1) can induce aerobic glycolysis that favors viral replication in mud crab Scylla paramamosain. However, the role of HIF-1 on key glycolytic genes during the MCDV-1 infection has not been examined. In this study, the intricate interplay between HIF-1 and the key glycolysis enzyme, lactate dehydrogenase (LDH), was investigated after MCDV-1 infection. The expression of LDH was significant increased after MCDV-1 infection. Additionally, the expression of HIF-1α was upregulated following MCDV-1 infection, potentially attributed to the downregulation of prolyl hydroxylase domains 2 expression. Subsequent examination of the SpLDH promoter identified the presence of hypoxia response elements (HREs), serving as binding sites for HIF-1α. Intriguingly, experimental evidence demonstrated that SpHIF-1α actively promotes SpLDH transcription through these HREs. To further elucidate the functional significance of SpHIF-1α, targeted silencing was employed, resulting in a substantial reduction in SpLDH expression, activity, and lactate concentrations in MCDV-1-infected mud crabs. Notably, SpHIF-1α-silenced mud crabs exhibited higher survival rates and lower viral loads in hepatopancreas tissues following MCDV-1 infection. These results highlight the critical role of SpHIF-1α in MCDV-1 pathogenesis by regulating LDH gene dynamics, providing valuable insights into the molecular mechanisms underlying the virus-host interaction.

Identification and functional characterization of activating transcription factor 6 (ATF6) from the mud crab (Scylla paramamosain) in response to hydrogen peroxide and bacterial challenge.

Activating transcription factor 6 (ATF6) is critical for regulation of unfolded protein response (UPR), which is involved in the endoplasmic reticulum (ER) proteostasis maintenance and cellular redox regulation. In the present study, a ATF6 gene from the mud crab (designated as Sp-ATF6) has been cloned and identified. The open reading frame of Sp-ATF6 was 1917 bp, encoding a protein of 638 amino acids. The deduced amino acid sequences of Sp-ATF6 contained a typical basic leucine zipper (BZIP domain). Sp-ATF6 was widely expressed in all tested tissues, with the highest expression levels in the hemocytes and the lowest in the muscle. Subcellular localization showed that Sp-ATF6 was expressed in both nucleus and cytoplasm of S2 cells. The expression level of Sp-ATF6 was induced by hydrogen peroxide and V. parahaemolyticus challenge, indicating that the ATF6 pathway was activated in response to ER stress. In order to know more about the regulation mechanism of the Sp-ATF6, RNA interference experiment was investigated. Knocking down Sp-ATF6 in vivo can decrease the expression of antioxidant-related genes (CAT and SOD) and heat shock proteins (HSP90 and HSP70) after V. parahaemolyticus infection. All these results suggested that Sp-ATF6 played a crucial role in the defense against environmental stress and pathogen infection in crustaceans.

The strength, position, and width changes of the intertropical convergence zone since the Last Glacial Maximum.

The intertropical convergence zone (ITCZ) plays a key role in regulating tropical hydroclimate and global water cycle through changes in its convection strength, latitudinal position, and width. The long-term variability of the ITCZ, along with the corresponding driving mechanisms, however, remains obscure, mainly because it is difficult to separate different ITCZ variables in paleoclimate proxy records. Here, we report a speleothem oxygen isotope (δ18O) record from southwestern Sulawesi, Indonesia, and compile it with other speleothem records from the Maritime Continent. Using the spatial gradient of speleothem δ18O along a transect across the ITCZ, we constrain ITCZ variabilities over the Maritime Continent during the past 30,000 y. We find that ITCZ convection strength overall intensified from the last glacial period to the Holocene, following changes in climate boundary conditions. The mean position of the regional ITCZ has moved latitudinally no more than 3° in the past 30,000 y, consistent with the deduction from the atmospheric energy framework. However, different from modern observations and model simulations for future warming, the ITCZ appeared narrower during both the late Holocene and most part of the last glacial period, and its expansion occurred during Heinrich stadials and the early-to-mid Holocene. We also find that during the last glacial and deglacial period, prominent millennial-scale ITCZ changes were closely tied to the variability of the Atlantic meridional overturning circulation (AMOC), whereas during the Holocene, they were predominantly modulated by the long-term variability of the Walker circulation.

Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser.

Due to the excellent properties of carbon fiber-reinforced polymers (CFRPs), such as high strength and strong corrosion resistance, the traditional water-jet-guided laser (WJGL) technology has problems with fiber pull-out and has a small cutting depth when processing CFRPs. Therefore, in this study, we used high-power water-jet-guided laser (HPWJGL) technology to perform groove processing experiments on CFRPs. The effects of four key process parameters, high laser power, pulse frequency, feed rate, and water-jet pressure, on the cutting depth were investigated by a single-factor experiment. The formation mechanism of groove cross-section morphology and the processing advantages of high-power water-jet-guided lasers were analyzed. On this basis, the mathematical prediction model of cutting depth was established by using the response surface method (RSM), and the optimal combination of process parameters was obtained. The mathematical prediction model was verified by experiments, and the error was only 1.84%, indicating that the model had a high reference value. This study provides a reference for the precision machining of HPWJGL technology.

Essential role of the HSC70 in the mud crab Scylla paramamosain in response to Vibrio parahaemolyticus infection.

Heat shock proteins play an important role in host defense, and modulate immune responses against pathogen infection. In this study, a novel HSC70 from the mud crab (designated as SpHSC70) was cloned and characterized. The full length of SpHSC70 contained a 58 bp 5'untranslated region (UTR), an open reading frame (ORF) of 2,046 bp and a 3'UTR of 341 bp. The SpHSC70 protein included the conserved DnaK motif. The mRNA of SpHSC70 was highly expressed in the hemocytes, heart and hepatopancreas, and lowly expressed in the intestine. The subcellular localization results indicated that SpHSC70 was localized in both the cytoplasm and the nucleus. Moreover, SpHSC70 was significantly responsive to bacterial challenge. RNA interference experiment was designed to investigate the roles of SpHSC70 in response to bacterial challenge. V. parahaemolyticus infection induced the expression levels of SpPO, SpHSP70, SpSOD and SpCAT. Knocking down SpHSC70 in vivo can decrease the expression of these genes after V. parahaemolyticus infection. These results suggested that SpHSC70 could play a vital role in defense against V. parahaemolyticus infection via activating the immune response and antioxidant defense signaling pathways in the mud crab.

Insights into the changes of structure and digestibility of microwave and heat moisture treated quinoa starch.

In this study, quinoa starch was subjected to microwave and heat moisture treatment (MHT) with various moisture content (15 %, 25 %, 35 %) and microwave power (4.8, 9.6, 14.4 W/g), and its structure and digestibility were investigated. SEM and particle size analysis indicated that MHT caused the agglomeration of starch granules and increased the particle size. Moreover, MHT increased the short-range order structure and relative crystallinity, except for MHT with moisture content (35 %). DSC results demonstrated that the gelatinization temperature and gelatinization enthalpy had a slight improvement after MHT. Moreover, MHT increased the amylose content to some extent. It was worth noting that the digestibility of quinoa starch significantly decreased. After MHT, a part of rapidly digestible starch (RDS) was converted into slowly digestible starch (SDS) or resistant starch (RS). Particularly, when moisture content was 25 %, the starch had a highest SDS + RS content. Thus, this study provided a potential approach using MHT to modulate the digestibility of starch.

Dissipative soliton resonance in a figure-eight multimode fiber laser.

We report, for the first time to the best of our knowledge, a spatiotemporal mode-locked (STML) multimode fiber laser based on nonlinear amplifying loop mirror (NALM), generating dissipative soliton resonance (DSR) pulses. Due to the complex filtering characteristics caused by the inherent multimode interference filtering structure and NALM in the cavity, the STML DSR pulse has wavelength tunable function. What's more, kinds of DSR pulses are also achieved, including multiple DSR pulses, and the period doubling bifurcations of single DSR pulse and multiple DSR pulses. These results contribute to further understand the nonlinear properties of STML lasers and may shed some light on improving the performance of the multimode fiber lasers.

Oligo-FISH of Populus simonii Pachytene Chromosomes Improves Karyotyping and Genome Assembly.

Poplar was one of the first woody species whose individual chromosomes could be identified using chromosome specific painting probes. Nevertheless, high-resolution karyotype construction remains a challenge. Here, we developed a karyotype based on the meiotic pachytene chromosome of Populus simonii which is a Chinese native species with many excellent traits. This karyotype was anchored by oligonucleotide (oligo)-based chromosome specific painting probes, a centromere-specific repeat (Ps34), ribosomal DNA, and telomeric DNA. We updated the known karyotype formula for P. simonii to 2n = 2x = 38 = 26m + 8st + 4t and the karyotype was 2C. The fluorescence in situ hybridization (FISH) results revealed some errors in the current P. simonii genome assembly. The 45S rDNA loci were located at the end of the short arm of chromosomes 8 and 14 by FISH. However, they were assembled on pseudochromosomes 8 and 15. In addition, the Ps34 loci were distributed in every centromere of the P. simonii chromosome in the FISH results, but they were only found to be present in pseudochromosomes 1, 3, 6, 10, 16, 17, 18, and 19. Our results reveal that pachytene chromosomes oligo-FISH is a powerful tool for constructing high-resolution karyotypes and improving the quality of genome assembly.

Experimental Study on the Preparation of Ultra-Fine Brass Tube Electrodes by Ultrasonic Vibration.

In order to automatically process ultra-fine copper tube electrodes, this study proposes a new method of ultrasonic vibration processing of ultra-fine copper tube, analyzes its processing principle, designs a new set of experimental processing equipment and completes the processing of 1.206 mm inner diameter, 1.276 mm outer diameter with core brass tube. Not only can the copper tube be completed with core decoring, the surface of the processed brass tube electrode also has good integrity. The effect of each machining parameter on the surface roughness of the electrode after machining was investigated by a single-factor experiment and the optimal machining effect was achieved under the conditions of machining gap 0.1 mm, ultrasonic amplitude 0.186 mm, table feed speed 6 mm/min, tube rotation speed 1000 r/min and reciprocating machining two times. The surface roughness was reduced from 1.21 µm before machining to 0.11 µm, and the residual pits, scratches and oxide layer on the surface were completely removed, which greatly improved the surface quality of the brass tube electrode and prolonged its service life.

Characterization of a novel prolyl hydroxylase 2 gene from mud crab Scylla paramamosain: Insights into its role in the regulation of hypoxia-inducible factor-1α.

Prolyl hydroxylase 2 (PHD2) is the key oxygen sensor that regulates the stability of the hypoxia-inducible factor -1α (HIF-1α). In this study, a novel PHD2 gene from the mud crab Scylla paramamosain, named SpPHD2, was cloned and identified. The full-length transcript of SpPHD2 was found to be 1926 bp, consisting of a 333 bp 5' untranslated region, a 1239 bp open reading frame, and a 354 bp 3' untranslated region. The putative SpPHD2 protein contained a Prolyl 4-hydroxylase alpha subunit homologues (P4Hc) domain in the C-terminal and a Myeloid translocation protein 8, Nervy, and DEAF-1 (MYND)-type zinc finger (zf-MYND) domain in the N-terminal. The mRNA expression of SpPHD2 was found to be widely distributed across all examined tissues. Additionally, the subcellular localization results indicated that the SpPHD2 protein was mainly localized in the cytoplasm. The in vivo silencing of SpPHD2 resulted in the upregulation of SpHIF-1α and a series of downstream genes involved in the HIF-1 pathway, while SpPHD2 overexpression in vitro dose-dependently reduced SpHIF-1α transcriptional activity, indicating that SpPHD2 plays a crucial role in SpHIF-1α regulation. Interestingly, the expression of SpPHD2 increased under hypoxic conditions, which was further inhibited by SpHIF-1α interference. Moreover, four hypoxia response elements were identified in the SpPHD2 promoter, suggesting that a feedback loop exists between SpPHD2 and SpHIF-1α under hypoxia. Taken together, these results provided new insights into the regulation of SpPHD2 in response to hypoxia in S. paramamosain.

Investigation of MAF for Finishing the Inner Wall of Super-Slim Cardiovascular Stents Tube.

The internal wall of cardiovascular stent tubing produced by a drawing process has defects such as pits and bumps, making the surface rough and unusable. In this research, the challenge of finishing the inner wall of a super-slim cardiovascular stent tube was solved by magnetic abrasive finishing. Firstly, a spherical CBN magnetic abrasive was prepared by a new method, plasma molten metal powders bonding with hard abrasives; then, a magnetic abrasive finishing device was developed to remove the defect layer from the inner wall of ultrafine long cardiovascular stent tubing; finally, response surface tests were performed and parameters were optimized. The results show that the prepared spherical CBN magnetic abrasive has a perfect spherical appearance; the sharp cutting edges cover the surface layer of the iron matrix; the developed magnetic abrasive finishing device for a ultrafine long cardiovascular stent tube meets the processing requirements; the process parameters are optimized by the established regression model; and the inner wall roughness (Ra) of the nickel-titanium alloy cardiovascular stents tube is reduced from 0.356 µm to 0.083 µm, with an error of 4.3% from the predicted value. Magnetic abrasive finishing effectively removed the inner wall defect layer and reduced the roughness, and this solution provides a reference for polishing the inner wall of ultrafine long tubes.