ABSTRACT
Background: As there is still no consensus on the treatment of carotid stent thrombosis (CST), we would like to describe our experience with the revascularization of CST by mechanical thrombectomy. Methods: We retrospectively studied patients who underwent mechanical thrombectomy after CST at Xuzhou Municipal First People's Hospital and Xuzhou Central Hospital between January 2020 and November 2022. The results of the procedures, complications, and clinical and imaging follow-up were recorded. Results: A total of six patients were included in this study. The stenosis grade before stent implantation was ≥85% in all patients, and the stenosis length ranged from 7 to 20 mm. Patients experienced CST within 6 days to 45 months after carotid artery stenting (CAS); the median admission on the National Institutes of Health Stroke Scale (NIHSS) at CST was 12 (range 8-25). Mechanical thrombectomy was successfully performed in all patients. There was no periprocedural death, and the modified Rankin Scale (mRS) at the 3-month follow-up was 0-2. All patients showed recovery from their neurological deficits. Conclusion: The treatment of symptomatic CST with mechanical thrombectomy resulted in satisfactory clinical outcomes. This regimen could be effective and safe, and future prospective and randomized studies are warranted.
ABSTRACT
BACKGROUND: To assess relative safety and diagnostic performance of low- and standard-dose computed tomography (CT)-guided biopsy for pulmonary nodules (PNs). MATERIALS AND METHODS: This was a single-center prospective randomized controlled trial (RCT). From June 2020 to December 2020, consecutive patients with PNs were randomly assigned into low- or standard-dose groups. The primary outcome was diagnosis accuracy. The secondary outcomes included technical success, diagnostic yield, operation time, radiation dose, and biopsy-related complications. This RCT was registered on 3 January 2020 and listed within ClinicalTrials.gov (NCT04217655). RESULTS: Two hundred patients were randomly assigned to low-dose (n = 100) and standard-dose (n = 100) groups. All patients achieved the technical success of CT-guided biopsy and definite final diagnoses. No significant difference was found in operation time (n = 0.231) between the two groups. The mean dose-length product was markedly reduced within the low-dose group compared to the standard-dose group (31.5 vs. 333.5 mGy-cm, P < 0.001). The diagnostic yield, sensitivity, specificity, and accuracy of the low-dose group were 68%, 91.5%, 100%, and 94%, respectively. The diagnostic yield, sensitivity, specificity, and accuracy were 65%, 88.6%, 100%, and 92% in the standard-dose group. There was no significant difference observed in diagnostic yield (P = 0.653), diagnostic accuracy (P = 0.579), rates of pneumothorax (P = 0.836), and lung hemorrhage (P = 0.744) between the two groups. CONCLUSIONS: Compared with standard-dose CT-guided biopsy for PNs, low-dose CT can significantly reduce the radiation dose, while yielding comparable safety and diagnostic accuracy.
Subject(s)
Lung Neoplasms , Multiple Pulmonary Nodules , Solitary Pulmonary Nodule , Humans , Lung/pathology , Lung Neoplasms/surgery , Multiple Pulmonary Nodules/diagnostic imaging , Image-Guided Biopsy/adverse effects , Image-Guided Biopsy/methods , Tomography, X-Ray Computed/methods , Retrospective Studies , Solitary Pulmonary Nodule/diagnostic imaging , Solitary Pulmonary Nodule/pathologyABSTRACT
The sediments of water bodies are not only pollutants sink but also sources of pollution. The assessment for the whole-sediment toxicity is still challenging research. Although the application of immobilized algal bead could overcome the practical difficulties in sediment toxicity assay, the weak growth and reduced sensitivity of algae inside the bead restricted its application. In this study, a sediment toxicity test was developed using immobilized sediment and Chlorella vulgaris. The immobilized sediment was prepared by mixing 2 g freeze-dried sediment and 15-mL 3% (w/v) alginate and hardened in a 4% (w/v) CaCl2 solution. Based on a C. vulgaris growth inhibition test and using the immobilized sediment, the median effective concentration value (EC50) of the spiked Cu and diuron was 506.23 and 2.37 mg/kg respectively, lower than that of using immobilized algae (719.62 and 3.12 mg/kg respectively). The Cu and diuron concentrations in the corresponding overlying water from the spiked immobilized and free sediment showed that sediment pollutants' diffusion capacity was not decreased after immobilization. By using the immobilized sediment in algae toxicity bioassay, the changes in the sediment toxicity of a polluted river before and after dredging was evaluated. The C. vulgaris growth inhibition in sediment A decreased from 81.94% to 8.43%; sediment B remained unchanged; sediment C stimulated the growth of C. vulgaris before dredging (-15.56%), but inhibited the algae growth after dredging (26.88%), and sediment D decreased growth inhibition from 32.66% to -12.60%.
Subject(s)
Chlorella vulgaris/drug effects , Geologic Sediments/chemistry , Toxicity Tests/methods , Water Pollutants, Chemical/toxicity , Alginates/chemistry , Calcium Chloride/chemistry , Chlorella vulgaris/growth & development , Copper/analysis , Copper/toxicity , Diuron/analysis , Diuron/toxicity , Rivers/chemistry , Water Pollutants, Chemical/analysisABSTRACT
There is worldwide concern with regard to the adverse effects of drug usage. However, contaminants can gain entry into a drug manufacturing process stream from several sources such as personnel, poor facility design, incoming ventilation air, machinery and other equipment for production, etc. In this validation study, we aimed to determine the impact and evaluate the contamination control in the preparation areas of the rapid transfer port (RTP) chamber during the pharmaceutical manufacturing processes. The RTP chamber is normally tested for airflow velocity, particle counts, pressure decay of leakage, and sterility. The air flow balance of the RTP chamber is affected by the airflow quantity and the height above the platform. It is relatively easy to evaluate the RTP chamber's leakage by the pressure decay, where the system is charged with the air, closed, and the decay of pressure is measured by the time period. We conducted the determination of a vaporized H2O2 of a sufficient concentration to complete decontamination. The performance of the RTP chamber will improve safety and can be completely tested at an ISO Class 5 environment.
Subject(s)
Air Filters , Air Pollutants, Occupational/analysis , Air Pollution, Indoor/prevention & control , Decontamination/methods , Drug Industry , Hydrogen Peroxide/analysis , Occupational Exposure/prevention & control , Air Pollution, Indoor/analysis , Decontamination/instrumentation , Drug Contamination , Humans , Occupational Exposure/analysis , Ventilation/instrumentation , Ventilation/methodsABSTRACT
For class II, type A2 biological safety cabinets (BSC), NSF/ANSI Standard 49 should be conformed in cabinet airflow velocity derivation, particle contamination, and aerodynamic flow properties. However, there exists a potential problem. It has been built that the cabinet air flow stabilize is influenced by the quantity of downflow of air and the height above the cabinet exhaust opening. Three air downflow quantities were compared as an operating apparatus was placed from 20 to 40 cm above the bench of the cabinet. The results show that the BSC air downflow velocity is a function of increased sampling height, displaying that containment is improvingly permitted over product protection as the sampling height decreases. This study investigated the concentration gradient of particles at various heights and downflow air quantity from the bench of the BSC. Experiment results indicate that performance near the bench was better than in the rest of the BSC. In terms of height, the best cleanliness was measured at a height of 10 cm over the bench; it reduced actually with add in height. The empirical curves accommodate, founded on the concentration gradient of particle created was elaborated for evaluating the particle concentration at different heights and downflow air quantity from the source of the bench of the BSC. The particle image velocimetry system applied for BSC airflow research to fix amount of airflow patterns and air distribution measurement and results of measurements show how obstructions can greatly influence the airflow and contaminant transportation in a BSC.
Subject(s)
Containment of Biohazards/instrumentation , Equipment Contamination/prevention & control , Air Pollution, Indoor/analysis , Biotechnology/instrumentation , Drug Industry/instrumentation , Environmental Monitoring , Filtration , Hazardous Substances/analysis , Particulate Matter/analysisABSTRACT
Sodium dodecyl sulfate (SDS) modified MgAl layered double hydroxides (LDHs) were synthesized at different surfactant concentrations (0.5-2.0 TAEC) by the co-precipitation method. The LDH-DS samples obtained were characterized by powder X-ray diffraction and FT-IR spectroscopy. The results showed that SDS was successfully intercalated into the interlayer of the LDH, and the basal spacing was expanded from 0.80 nm to 3.98 nm. The intercalated SDS was considered consistent with a paraffin bilayers arrangement. The sorption of nitrobenzene on LDH-DS was examined, and the results showed that linear model could fit the sorption isotherms well (R2 > 0.99), which implied a partitioning sorption process. The sorption coefficient of nitrobenzene (K(d)) on LDH-DS was positively related to the DS - loading amount, but the organic carbon content normalized sorption coefficient of nitrobenzene (K(oc)) was shown to remain relatively constant. The sorption thermodynamics results showed that the sorption of nitrobenzene on LDH-DS was an endothermic process, and the increase of entropy was the driving force for the sorption process.