Enhanced Circular Dichroism for Achiral Sensing Based on a DNA-Origami-Empowered Anapole Metasurface.

Circular dichroism (CD) spectroscopy has been extensively utilized for detecting and distinguishing the chirality of diverse substances and structures. However, CD spectroscopy is inherently weak and conventionally associated with chiral sensing, thus constraining its range of applications. Here, we report a DNA-origami-empowered metasurface sensing platform through the collaborative effect of metasurfaces and DNA origami, enabling achiral/slightly chiral sensing with high sensitivity via the enhanced ΔCD. An anapole metasurface, boasting over 60 times the average optical chirality enhancement, was elaborately designed to synergize with reconfigurable DNA origami. We experimentally demonstrated the detection of achiral/slightly chiral DNA linker strands via the enhanced ΔCD of the proposed platform, whose sensitivity was a 10-fold enhancement compared with the platform without metasurfaces. Our work presents a high-sensitivity platform for achiral/slightly chiral sensing through chiral spectroscopy, expanding the capabilities of chiral spectroscopy and inspiring the integration of multifunctional artificial nanostructures across diverse domains.

Investigating the applicability of novel hydrate dissociation inhibitors in oilwell cement through molecular simulations.

In the field of hydrate formation cementing, the method of developing the low hydration exothermic cement systems cannot effectively solve the problem of hydrate dissociation caused by the hydration heat release of cement. Therefore, we proposed a new approach to address this issue by employing cement additives that can effectively delay the dissociation of hydrate. In our previous work, we designed a novel hydrate dissociation inhibitor, PVCap/dmapma, however, its applicability with cement slurry remains unverified. In this study, we established a more realistic model of oilwell cement gel based on experimental data. Additionally, we investigated the potential effects of PVCap/dmapma on the microstructure and mechanical properties of cement gel through molecular simulations. The results suggest that PVCap/dmapma has no negative effect on the performance of cement slurry compared to Lecithin. By adding PVCap/dmapma to cement slurry, the problem of cementing in hydrate formations is expected to be solved.

Laws of Hydration Heat of Cement and Hydrate Stabilization in Shallow Formations of Deep Seawater.

When cementing is required in marine deepwater hydrate formations, the heat released from the hydration process of oil well cement can easily lead to hydrate decomposition. It is necessary to clarify the initial phase transition temperature of the hydrate layer under the influence of cement waiting for setting so that it can meet the stability of the hydrate layer during cementing. In this paper, based on the actual conditions of offshore deepwater cementing, the coupled temperature field model of cement sheath hydration heat source-well wall hydrate decomposition is established by considering the hydration heat release during the cement waiting process and the phase change heat absorption of the well wall hydrate. Combined with the established model, the hydrate formation in the deepwater region of the ocean was selected and matched with suitable oil well cement for simulation. Through simulation, the critical temperature range (291-295 K) for the initial phase transition of the hydrate layer at 10-15 MPa was clarified and the relationship between the critical values of cement hydration heat release to maintain hydrate stability at different initial temperatures of the formation was established. The phase stability law of hydrates in the formation under cement sheath hydration heat release was revealed, providing a theoretical basis and guidance for the development of low-hydration heat release cement slurry systems.

The motive forces in DNA-enabled nanomachinery.

Building machines that can augment or replace human efforts to accomplish complex tasks is one of central topics for humanity. Especially, nanomachines made of discrete numbers of molecular components can perform intended mechanical movements in a predetermined manner. Utilizing free energies of Watson-Crick base pairing, different types of DNA nanomachines have been invented to operate intended stepwise or autonomous actions with external stimuli, and we here summarized the motive forces that drive DNA-based nanomachineries. DNA tweezers, DNA origami actuators, DNA walkers, and DNA machine-enabled bulk sensing are discussed including structural motif design, toehold creations for strands displacement reactions, and other input forces, as well as examples of biological motor-driven hybrid nanomachines. By addressing these prototypical artificial nanodevices, we envision future focuses should include developing various input energies, host cell-assisted structure self-replication, and nonequilibrium transportations.

Bacteria-mediated resistance of neutrophil extracellular traps to enzymatic degradation drives the formation of dental calculi.

Dental calculi can cause gingival bleeding and periodontitis, yet the mechanism underlying the formation of such mineral build-ups, and in particular the role of the local microenvironment, are unclear. Here we show that the formation of dental calculi involves bacteria in local mature biofilms converting the DNA in neutrophil extracellular traps (NETs) from being degradable by the enzyme DNase I to being degradation resistant, promoting the nucleation and growth of apatite. DNase I inhibited NET-induced mineralization in vitro and ex vivo, yet plasma DNases were ineffective at inhibiting ectopic mineralization in the oral cavity in rodents. The topical application of the DNA-intercalating agent chloroquine in rodents fed with a dental calculogenic diet reverted NET DNA to its degradable form, inhibiting the formation of calculi. Our findings may motivate therapeutic strategies for the reduction of the prevalence of the deposition of bacteria-driven calculi in the oral cavity.

Itemized determination of As, Sb, Bi, Se, and Ge in graphite sample by HG-AFS with high-temperature microwave digestion.

In this paper, we optimized a method for fast and accurate determination of five impurity elements (As, Sb, Bi, Se, and Ge) in graphite samples to overcome the shortcomings of existing methods, such as complicated equipment, cumbersome process, multiple-time preparation, separate determination, and large error in results. Graphite samples were digested with HNO3-H2SO4-HClO4-HF in a high-temperature and high-pressure microwave digestion apparatus, and the elements were extracted and determined separately by AFS (atomic fluorescence spectrometry). There is no element loss during the processing and analysis of this method. The spike recoveries (As: 90.30%-102.3%, Sb: 90.73%-110.0%, Bi: 90.00%-99.67%, Se: 93.33%-110.0%, Ge: 92.26%-104.2%) and precision (RSD%; As: 1.34%-8.96%, Sb: 2.67%-7.10%, Bi: 1.83%-4.58%, Se: 0.36%-3.25%, Ge: 4.41%-8.65%) meet the requirements of the corresponding quality specifications. The method has some advantages (such as no elemental loss, fast testing, strong element targeting, and accurate results), and thus can achieve batch determination of graphite samples. The optimized method for graphite sample and final solution preparations can be used for diverse spectrometric technologies, and that for spectrometer conditions have reference value for HG-AFS instruments.

Phytochrome-interacting factors play shared and distinct roles in regulating shade avoidance responses in Populus trees.

Plants adjust their growth and development in response to changing light caused by canopy shade. The molecular mechanisms underlying shade avoidance responses have been widely studied in Arabidopsis and annual crop species, yet the shade avoidance signalling in woody perennial trees remains poorly understood. Here, we first showed that PtophyB1/2 photoreceptors serve conserved roles in attenuating the shade avoidance syndrome (SAS) in poplars. Next, we conducted a systematic identification and characterization of eight PtoPIF genes in Populus tomentosa. Knocking out different PtoPIFs led to attenuated shade responses to varying extents, whereas overexpression of PtoPIFs, particularly PtoPIF3.1 and PtoPIF3.2, led to constitutive SAS phenotypes under normal light and enhanced SAS responses under simulated shade. Notably, our results revealed that distinct from Arabidopsis PIF4 and PIF5, which are major regulators of SAS, the Populus homologues PtoPIF4.1 and PtoPIF4.2 seem to play a minor role in controlling shade responses. Moreover, we showed that PtoPIF3.1/3.2 could directly activate the expression of the auxin biosynthetic gene PtoYUC8 in response to shade, suggesting a conserved PIF-YUC-auxin pathway in modulating SAS in tree. Overall, our study provides insights into shared and divergent functions of PtoPIF members in regulating various aspects of the SAS in Populus.

Engineering a pH-responsive polymeric micelle co-loaded with paclitaxel and triptolide for breast cancer therapy.

Breast cancer has overtaken lung cancer as the number one cancer worldwide. Paclitaxel (PTX) is a widely used first-line anti-cancer drug, but it is not very effective in clinical breast cancer therapy. It has been reported that triptolide (TPL) can enhance the anticancer effect of paclitaxel, and better synergistic therapeutic effects are seen with concomitant administration of PTX and TPL. In this study, we developed pH-responsive polymeric micelles for co-delivery of PTX and TPL, which disassembling in acidic tumour microenvironments to target drug release and effectively kill breast cancer cells. Firstly, we synthesized amphiphilic copolymer mPEG2000-PBAE through Michael addition reaction, confirmed by various characterizations. Polymer micelles loaded with TPL and PTX (TPL/PTX-PMs) were prepared by the thin film dispersion method. The average particle size of TPL/PTX-PMs was 97.29 ± 1.63 nm, with PDI of 0.237 ± 0.003 and Zeta potential of 9.57 ± 0.80 mV, LC% was 6.19 ± 0.21%, EE% was 88.67 ± 3.06%. Carrier material biocompatibility and loaded micelle cytotoxicity were assessed using the CCK-8 method, demonstrating excellent biocompatibility. Under the same drug concentration, TPL/PTX-PMs were the most toxic to tumour cells and had the strongest proliferation inhibitory effect. Cellular uptake assays revealed that TPL/PTX-PMs significantly increased intracellular drug concentration and enhanced antitumor activity. Overall, pH-responsive micellar co-delivery of TPL and PTX is a promising approach for breast cancer therapy.

SPL16 and SPL23 mediate photoperiodic control of seasonal growth in Populus trees.

Perennial trees in boreal and temperate regions undergo growth cessation and bud set under short photoperiods, which are regulated by phytochrome B (phyB) photoreceptors and PHYTOCHROME INTERACTING FACTOR 8 (PIF8) proteins. However, the direct signaling components downstream of the phyB-PIF8 module remain unclear. We found that short photoperiods suppressed the expression of miR156, while upregulated the expression of miR156-targeted SQUAMOSA-PROMOTER BINDING PROTEIN-LIKE 16 (SPL16) and SPL23 in leaves and shoot apices of Populus trees. Accordingly, either overexpression of MIR156a/c or mutagenesis of SPL16/23 resulted in the attenuation of growth cessation and bud set under short days (SD), whereas overexpression of SPL16 and SPL23 conferred early growth cessation. We further showed that SPL16 and SPL23 directly suppressed FLOWERING LOCUS T2 (FT2) expression while promoted BRANCHED1 (BRC1.1 and BRC1.2) expression. Moreover, we revealed that PIF8.1/8.2, positive regulators of growth cessation, directly bound to promoters of MIR156a and MIR156c and inhibited their expression to modulate downstream pathways. Our results reveal a connection between the phyB-PIF8 module-mediated photoperiod perception and the miR156-SPL16/23-FT2/BRC1 regulatory cascades in SD-induced growth cessation. Our study provides insights into the rewiring of a conserved miR156-SPL module in the regulation of seasonal growth in Populus trees.

An experimental study of the correlation between P-wave velocity and the physical properties of weakly cemented formations.

Deep water and shallow layers mostly feature weakly cemented formations, with complex geological structures, geological looseness, susceptibility to collapse. In order to obtain information on weakly cemented formation materials, weakly cemented argillaceous siltstone is simulated as the research object and the focus is on analysing the influence of ultrasonic frequency, density, particle size (porosity), and compressive strength on P-wave velocity and establishing the correlation relationship between longitudinal wave velocity and each parameter through indoor simulation experiments. The results showed that there is a linear relationship between P-wave velocity and ultrasonic frequency in terms of positive correlation as well as compressive strength. The nonlinear relationship between P-wave velocity and particle size (porosity) is a negative correlation, while the nonlinear relationship between sound velocity and density is a positive correlation. In addition, the influence of core height on P-wave velocity is analysed; it is found that as the core height increases, the velocity slightly decreases, and each ultrasonic frequency has an ultimate height for sound wave penetration. Through the response relationship between ultrasound and the physical properties of weakly cemented formations, indirect acquisition can be achieved, which is of great significance for the development of oil and gas in weakly cemented formations.

Preparation and Characteristics of a pH Intelligent Response Blocking Agent for the Microcrack in the Cement Sheath.

Microcracks in the annular cement sheath of oil wells frequently cause annular water channeling. Traditional cement squeeze technology has a low success rate in controlling this issue. Based on the conventional profile control water-blocking agent for underground in situ gelling and polyacrylic acid, a pH intelligent response microcrack-blocking agent was developed to block the microcrack in the cement sheath. The study investigated the influence of pH on the viscosity characteristics of the new blocking agent, the impact of polyacrylic acid on the compression recovery ability of the new blocking agent after gelling, the change in viscosity of the blocking fluid after flowing through the microcrack in the cement sheath, and the blocking effect after gelling. The results indicated that the new blocking agent has excellent viscosity-increasing ability with pH. After flowing through the microcrack in the cement sheath, the viscosity of the blocking agent increased significantly with the extension of the contact distance between the blocking agent and the microcrack in the cement sheath, which is very conducive to the retention of the blocking agent in the microcrack of the cement sheath. Polyacrylic acid had a negligible effect on the compression recovery ability of the blocking agent after gelling. At a fracture length of 5 cm, the pressure-bearing capacity of the blocking agent could reach 6 MPa.

High temperature inhibits vascular development via the PIF4-miR166-HB15 module in Arabidopsis.

The plant vascular system is an elaborate network of conducting and supporting tissues that extends throughout the plant body, and its structure and function must be orchestrated with different environmental conditions. Under high temperature, plants display thin and lodging stems that may lead to decreased yield and quality of crops. However, the molecular mechanism underlying high-temperature-mediated regulation of vascular development is not known. Here, we show that Arabidopsis plants overexpressing the basic-helix-loop-helix (bHLH) transcription factor PHYTOCHROME INTERACTING FACTOR 4 (PIF4), a central regulator of high-temperature signaling, display fewer vascular bundles (VBs) and decreased secondary cell wall (SCW) thickening, mimicking the lodging inflorescence stems of high-temperature-grown wild-type plants. Rising temperature and elevated PIF4 expression reduced the expression of MIR166 and, concomitantly, elevated the expression of the downstream class III homeodomain leucine-zipper (HD-ZIP III) family gene HB15. Consistently, knockdown of miR166 and overexpression of HB15 led to inhibition of vascular development and SCW formation, whereas the hb15 mutant displayed the opposite phenotype in response to high temperature. Moreover, in vitro and in vivo assays verified that PIF4 binds to the promoters of several MIR166 genes and represses their expression. Our study establishes a direct functional link between PIF4 and the miR166-HB15 module in modulating vascular development and SCW thickening and consequently stem-lodging susceptibility at elevated temperatures.

Opportunities and challenges for DNA in atomic and close-to-atomic scale manufacturing.

The revolutionary products obtained from atomic and close-to-atomic scale manufacturing (ACSM) has motivated people to conduct more in-depth research. There is a pressing need to surpass the constraints of current technology and achieve precise construction at the atomic scale. The emergence of DNA nanotechnology has enabled DNA to serve as a template for precisely localizing functional components. These advantages of DNA in bottom-up manufacturing give it great potential in ACSM. From this perspective, we review the ability of DNA to accurately build complex structures and discuss its application and prospects in precise atomic manipulation. Finally, opportunities and challenges for DNA in ACSM are systematically summarized.

High-entropy alloy nanopatterns by prescribed metallization of DNA origami templates.

High-entropy multimetallic nanopatterns with controlled morphology, composition and uniformity hold great potential for developing nanoelectronics, nanophotonics and catalysis. Nevertheless, the lack of general methods for patterning multiple metals poses a limit. Here, we develop a DNA origami-based metallization reaction system to prescribe multimetallic nanopatterns with peroxidase-like activities. We find that strong coordination between metal elements and DNA bases enables the accumulation of metal ions on protruding clustered DNA (pcDNA) that are prescribed on DNA origami. As a result of the condensation of pcDNA, these sites can serve as nucleation site for metal plating. We have synthesized multimetallic nanopatterns composed of up to five metal elements (Co, Pd, Pt, Ag and Ni), and obtained insights on elemental uniformity control at the nanoscale. This method provides an alternative pathway to construct a library of multimetallic nanopatterns.

Preparation and performance evaluation of non-foaming styrene-acrylic latex for cementing slurry.

The latex used conventionally for oil-well cementing can lead to serious foaming issues in the cement slurry, which not only affects the accurate measurement of the density of the latex-containing cement slurry, but also is detrimental to cementing construction. A large amount of a foam stabilizer used for latex preparation is mainly responsible for foaming of the latex-containing cement slurry. In this study, soap-free emulsion polymerization was conducted using 2-acrylamido-2-methylpropanesulfonic acid (AMPS), styrene (St), and butyl acrylate (BA) as the reaction monomers and the effects of the AMPS dosage, monomer ratio, reaction temperature and stirring speed on the performance of the latex were investigated. The optimum synthesis conditions included a 30% monomer concentration, an St : BA : AMPS monomer ratio of 5 : 4 : 6, a synthesis temperature of 85°C, a stirring speed of 400 r.p.m. and 1.5% of the initiator. As-prepared latex exhibited good filtration loss control, excellent freeze-thaw stability, and extremely low foaming of the cement slurry with the added latex, which was extremely beneficial for on-site cementing construction.

Gold Triangular Nanoprisms: Anisotropic Plasmonic Materials with Unique Structures and Properties.

As a novel type of anisotropic inorganic nanomaterials, gold triangular nanoprisms (AuTNPs) have been widely studied for their well-defined structures and excellent plasmonic properties. This review starts with synthetic methodology, combing through the early thermal solution method to the mature seed-mediated method and seedless method. The possible mechanisms proposed by predecessors and the problems needed to be solved are also arranged. Along with this, the important morphological evolution process of AuTNPs during synthesis and post-synthesis stages are revealed, which is of great significance for further understanding the structure of AuTNPs and developing new synthesis strategies. Finally, the applications of AuTNPs, especially associated with plasmonic properties, are listed and summarized where surface-enhanced Raman scattering (SERS), catalysis, phototherapy and biosensor are included, so that researchers can quickly comprehend the current situation, and provide a basis for further development and exploration of AuTNPs.

Effects of microstructure on compressive strength of silica sand-enhanced oil well cement at a wide temperature range.

The influence of microstructure of silica-enhanced cement on the mechanical performance of cement is difficult to describe. In this study, we used the scanning electron microscope and image processing method to investigate the relationship between the complicity of cement microstructure and compressive strength under various temperatures and curing times. Fractal dimension was applied to describe the complicity of silica-enhanced cement. The relationships among compressive strength, fractal dimension, temperature, curing time and pore structure of cement were identified. The results show that curing time directly controls the complicity of microstructure of silica-enhanced cement and compressive strength by altering the pore orientation and macropore ratio in silica-enhanced cement. The curing temperature affects the complicity of cement microstructure and compressive strength indirectly by changing the ratio of micropore and small pore. The fractal dimension of silica-enhanced cement shows good correlation with compressive strength. Pore size distribution is the most important factor that influences the complicity of cement matrix and compressive strength of silica-enhanced cement. When building up the macroscopic mechanical performance model of silica-enhanced cement, we should consider the influence of pore size distribution in cement under different curing temperatures and times on the complicity of cement microstructure.

Advances in DNA Supramolecular Hydrogels for Tissue Engineering.

Deoxyribonucleic acid (DNA) is a biological macromolecule that plays a genetic role in cells. DNA molecules with specific recognition, self-assembly capabilities, and sequence programmability have become an excellent construction material for micro- and nanostructures. Based on DNA self-assembly technology, a series of molecular devices and materials are constructed. Among them, DNA hydrogels with the advantages of good biocompatibility, biodegradability, and containing designable stimuli-responsive units have attracted much attention. This review introduces the formation strategy of DNA supramolecular hydrogels, and focuses on its applications in tissue engineering, including cell encapsulation, cell culture, cell capture and release, wound dressings, and tissue growth. The unique properties and application prospects of DNA supramolecular hydrogels in tissue engineering are also discussed.

Study on the genetic damage caused by cadmium sulfide quantum dots in human lymphocytes.

Cadmium sulfide quantum dots (CdS QDs) are being developed for sensors, fluorescent probes, and other platforms and are attracting increasing attention. Given the growing demand for QDs, it is clear that there is a need to understand their potential toxicity to organisms. However, little is known regarding the genotoxicity of CdS QDs to humans. Therefore, this study used CdS QDs as the research object, cultured human peripheral blood lymphocytes, and randomly divided them into a control group, CdS I group (CdS QDs), and CdS II group (CdS QDs coated with thioglycolic acid). After cultivation, we measured the olive tail distance, tail length, tail DNA%, lymphocyte micronucleus rate, and aneuploid rate. The comet test results indicated that the indices of the QD group were significantly larger than those of the control group (P < 0.05). The results of the micronucleus and chromosome aberration tests showed that the lymphocyte micronucleus rate and chromosome aneuploid rate in the QD group were significantly increased (P < 0.05) compared with those in the control group. In conclusion, CdS QDs have certain genotoxicity to human peripheral blood lymphocytes, and the DNA damage caused by CdS QDs encapsulated with thioglycolic acid is less severe than that caused by nonencapsulated CdS QDs.