Causal diagnostic model and governance strategies to reduce pollution from ship accidents in Chinese waters.

Ship transportation is a primary mode for global trade and cargo transport, yet even minor discrepancies can lead to ship accidents, causing severe secondary environmental pollution. Maritime accidents involve complex and numerous factors. Formal Concept Analysis (FCA) can identify the key contributing factors and their impact levels by eliminating homogenization factors in maritime accidents. This study constructs an innovative FCA model of ship accidents in Chinese waters, utilizing 172 ship accident reports released by the China Maritime Safety Administration. The analysis reveals seven reduced sets and 23 diagnostic rules of ship accidents. Results show that failed ship registration/security inspection, deficient nautical data and instruments, and management issues are the most critical factors. Three accident chains are identified and corresponding mitigation strategies are proposed to reduce potential pollution from ship accidents. These strategies offer significant reference value for preventing ship accidents and reducing their environmental impact in China and globally.

3D printing for constructing biocarriers using sodium alginate/ε-poly-l-lysine ink: Enhancing microbial enrichment for efficient nitrogen removal in wastewater.

The microbial enrichment of traditional biocarriers is limited due to the inadequate consideration of spatial structure and surface charging characteristics. Here, capitalizing on the ability of 3D printing technology to fabricate high-resolution materials, we further designed a positively charged sodium alginate/ε-poly-l-lysine (SA/ε-PL) printing ink, and the 3D printed biocarriers with ideal pore structure and rich positive charge were constructed to enhance the microbial enrichment. The rheological and mechanical tests confirmed that the developed SA/ε-PL ink could simultaneously satisfy the smooth extrusion for printing process and the maintenance of 3D structure. The utilization of the ε-PL secondary cross-linking strategy reinforced the 3D mechanical structure and imparted the requisite physical properties for its application as a biocarrier. Compared with traditional sponge carriers, 3D printed biocarrier had a faster initial attachment rate and a higher biomass of 14.58 ±â€¯1.18 VS/cm3, and the nitrogen removal efficiency increased by 53.9 %. Besides, due to the superior electrochemical properties and biocompatibility, the 3D printed biocarriers effectively enriched the electroactive denitrifying bacteria genus Trichococcus, thus supporting its excellent denitrification performance. This study provided novel insights into the development of new functional biocarriers in the wastewater treatment, thereby providing scientific guidance for practical engineering.

Exploring the potential of cryptochlorogenic acid as a dietary adjuvant for multi-target combined lung cancer treatment.

BACKGROUND: Lung cancer is a highly malignant disease with limited treatment options and significant adverse effects. It is urgent to develop novel treatment strategies for lung cancer. In recent years, TMEM16A has been confirmed as a specific drug target for lung cancer. The development of TMEM16A-targeting drugs and combined administration for the treatment of lung cancer has become a research hotspot. METHODS: Fluorescence screening and electrophysiological experiments were conducted to confirm the inhibitory effect of CCA on TMEM16A. Molecular dynamics simulation and site-directed mutagenesis were employed to analyze the binding mode of CCA and TMEM16A. CCK-8, colony formation, wound healing, transwell, and annexin-V experiments were conducted to explore the regulatory effects and mechanisms of CCA on the proliferation, migration, and apoptosis of lung cancer cells. Tumor model mice and pharmacokinetic experiments were used to examine the efficacy and safety of CCA and cisplatin in vivo. RESULTS: This study firstly confirmed that CCA effectively inhibits TMEM16A to exert anticancer effects and analyzed the pharmacological mechanism. CCA bound to S517/N546/E623/E633/Q637 of TMEM16A through hydrogen bonding and electrostatic interactions. It inhibited the proliferation and migration, and induced apoptosis of lung cancer cells by targeting TMEM16A. In addition, the combined administration of CCA and cisplatin exhibited a synergistic effect, enhancing the efficacy of lung cancer treatment while reducing side effects. CONCLUSION: CCA is an effective novel inhibitor of TMEM16A, and it synergizes with cisplatin in anticancer treatment. These findings will provide new research ideas and lead compound for the combination therapy of lung cancer.

A context-sensitive collectivism during the COVID-19 pandemic: Effect on the adoption of containment measures in China and the US.

This study investigates individuals' adoption of containment measures (e.g., wearing masks) from the perspectives of cultural values and trust in two countries-China and the US. Distinguished from previous definitions that characterise cultural values as rigid and fixed concepts, this study reconceptualizes collectivism to be a context-sensitive construct. With survey data from a collectivism-prevalent culture (China, n = 1578) and an individualism-prevalent culture (the US, n = 1510), it unfolds the underlying mechanism by which collectivism influences people's adoption of containment measures in both countries. Results indicate that institutional trust serves as a significant mediator in this relationship. In both countries, individuals who hold a collectivistic value on the pandemic are more likely to endorse the adoption of containment measures. This endorsement is driven by their trust in public institutions, which stems from their collectivistic values. Additionally, slight distinctions emerge, revealing that collectivistic values directly predict the behaviours among Chinese individuals, whereas such a direct effect is not observed in the US. Practical implications will be offered.

Structural and theoretical basis for drug development targeting TMEM16A: Inhibition mechanism of tracheloside analogs.

Ion channels play a crucial role in the electrophysiological activities of organisms. The calcium-activated chloride channel TMEM16A is involved in various physiological processes. Therefore, inhibitors of TMEM16A are used to treat diseases caused by TMEM16A dysfunction. However, the unclear inhibition mechanism hinders the progress of drug development. Based on our previous study, we found that the molecular structures of TMEM16A inhibitors tracheloside, matairesinoside and arctigenin are similar. In this study, we conducted a structure-based virtual screening of tracheloside analogs from the PubChem database. The six tracheloside analogs with the highest affinity to TMEM16A were selected, and their inhibitory effects were detected by fluorescence and electrophysiological experiments. Subsequently, the interaction between the tracheloside analogs and TMEM16A was investigated through molecular docking and site-directed mutagenesis. Based on the above results, the mechanism of inhibition of TMEM16A gated conformation by tracheloside analogs was proposed. These findings provide a structural and theoretical basis for drug development targeting TMEM16A.

Lipid Regulatory Element Interact with CD44 on Mitochondrial Bioenergetics in Bovine Adipocyte Differentiation and Lipometabolism.

The CD44 gene is a critical factor in animal physiological processes and has been shown to affect insulin resistance and fat accumulation in mammals. Nevertheless, little research has been conducted on its precise functions in lipid metabolism and adipogenic differentiation in beef cattle. This study analyzed the expression of CD44 and miR-199a-3p during bovine preadipocyte differentiation. The luciferase reporter assay demonstrated that CD44 was a direct target of miR-199a-3p. Increased accumulation of lipid droplets and triglyceride levels, altered fatty acid metabolism, and accelerated preadipocyte differentiation were all caused by the upregulation of miR-199a-3p or a reduction in CD44 expression. CD44 knockdown upregulated the expression of adipocyte-specific genes (LPL and FABP4) and altered the levels of lipid metabolites (SOPC, l-arginine, and heptadecanoic acid). Multiomics highlights enriched pathways involved in energy metabolism (MAPK, cAMP, and calcium signaling) and shifts in mitochondrial respiration and glycolysis, indicating that CD44 plays a regulatory role in lipid metabolism. The findings show that intracellular lipolysis, glycolysis, mitochondrial respiration, fat deposition, and lipid droplet composition are all impacted by miR-199a-3p, which modulates CD44 in bovine adipocytes.

Biomaterials-Based Technologies in Skeletal Muscle Tissue Engineering.

For many clinically prevalent severe injuries, the inherent regenerative capacity of skeletal muscle remains inadequate. Skeletal muscle tissue engineering (SMTE) seeks to meet this clinical demand. With continuous progress in biomedicine and related technologies including micro/nanotechnology and 3D printing, numerous studies have uncovered various intrinsic mechanisms regulating skeletal muscle regeneration and developed tailored biomaterial systems based on these understandings. Here, the skeletal muscle structure and regeneration process are discussed and the diverse biomaterial systems derived from various technologies are explored in detail. Biomaterials serve not merely as local niches for cell growth, but also as scaffolds endowed with structural or physicochemical properties that provide tissue regenerative cues such as topographical, electrical, and mechanical signals. They can also act as delivery systems for stem cells and bioactive molecules that have been shown as key participants in endogenous repair cascades. To achieve bench-to-bedside translation, the typical effect enabled by biomaterial systems and the potential underlying molecular mechanisms are also summarized. Insights into the roles of biomaterials in SMTE from cellular and molecular perspectives are provided. Finally, perspectives on the advancement of SMTE are provided, for which gene therapy, exosomes, and hybrid biomaterials may hold promise to make important contributions.

Development and validation of [18 F]-PSMA-1007 PET-based radiomics model to predict biochemical recurrence-free survival following radical prostatectomy.

PURPOSE: Biochemical recurrence (BCR) following radical prostatectomy (RP) is a significant concern for patients with prostate cancer. Reliable prediction models are needed to identify patients at risk for BCR and facilitate appropriate management. This study aimed to develop and validate a clinical-radiomics model based on preoperative [18 F]PSMA-1007 PET for predicting BCR-free survival (BRFS) in patients who underwent RP for prostate cancer. MATERIALS AND METHODS: A total of 236 patients with histologically confirmed prostate cancer who underwent RP were retrospectively analyzed. All patients had a preoperative [18 F]PSMA-1007 PET/CT scan. Radiomics features were extracted from the primary tumor region on PET images. A radiomics signature was developed using the least absolute shrinkage and selection operator (LASSO) Cox regression model. The performance of the radiomics signature in predicting BRFS was assessed using Harrell's concordance index (C-index). The clinical-radiomics nomogram was constructed using the radiomics signature and clinical features. The model was externally validated in an independent cohort of 98 patients. RESULTS: The radiomics signature comprised three features and demonstrated a C-index of 0.76 (95% CI: 0.60-0.91) in the training cohort and 0.71 (95% CI: 0.63-0.79) in the validation cohort. The radiomics signature remained an independent predictor of BRFS in multivariable analysis (HR: 2.48, 95% CI: 1.47-4.17, p < 0.001). The clinical-radiomics nomogram significantly improved the prediction performance (C-index: 0.81, 95% CI: 0.66-0.95, p = 0.007) in the training cohort and (C-index: 0.78 95% CI: 0.63-0.89, p < 0.001) in the validation cohort. CONCLUSION: We developed and validated a novel [18 F]PSMA-1007 PET-based clinical-radiomics model that can predict BRFS following RP in prostate cancer patients. This model may be useful in identifying patients with a higher risk of BCR, thus enabling personalized risk stratification and tailored management strategies.

Anesthesia/surgery activate MMP9 leading to blood-brain barrier disruption, triggering neuroinflammation and POD-like behavior in aged mice.

Anesthesia and surgery activate matrix metalloproteinase 9 (MMP9), leading to blood-brain barrier (BBB) disruption and postoperative delirium (POD)-like behavior, especially in the elderly. Aged mice received intraperitoneal injections of either the MMP9 inhibitor SB-3CT, melatonin, or solvent, and underwent laparotomy under 3 % sevoflurane anesthesia(anesthesia/surgery). Behavioral tests were performed 24 h pre- and post-operatively. Serum and cortical tissue levels of interleukin (IL)-1ß, IL-6, and tumor necrosis factor-α (TNF-α) were measured using ELISA. Levels of PDGFRß, MMP9, tight junction, Mfsd2a, caveolin-1, synaptophysin, and postsynaptic densin (PSD)-95 proteins in the prefrontal cortex were assayed using Western blotting. BBB permeability was assessed by detecting IgG in the prefrontal cortex and serum S100ß levels. Anesthesia/surgery-induced peripheral inflammation activated MMP9, which in turn injured pericytes and tight junctions and increased transcytosis, thereby disrupting the BBB. Impaired BBB allowed the migration of peripheral inflammation into the central nervous system (CNS), thereby inducing neuroinflammation, synaptic dysfunction, and POD-like behaviors. However, MMP9 inhibition reduced pericyte and tight junction injury and transcytosis, thereby preserving BBB function and preventing the migration of peripheral inflammation into the CNS, thus attenuating synaptic dysfunction and POD-like behavior. In addition, to further validate the above findings, we showed that melatonin exerted similar effects through inhibition of MMP9. The present study shows that after anesthesia/surgery, inflammatory cytokines upregulation is involved in regulating BBB permeability in aged mice through activation of MMP9, suggesting that MMP9 may be a potential target for the prevention of POD.

How halogenated aromatic compounds affect the electron supply and consumption in glucose supported denitrification?

Halogenated aromatic compounds possess bidirectional effects on denitrifying bio-electron behavior, providing electrons and potentially interfering with electron consumption. This study selected the typical 4-chlorophenol (4-CP, 0-100 mg/L) to explore its impact mechanism on glucose-supported denitrification. When COD(glucose)/COD(4-CP)=28.70-3.59, glucose metabolism remained the dominant electron supply process, although its removal efficiency decreased to 73.84-49.66 %. When COD(glucose)/COD(4-CP)=2.39-1.43, 4-CP changed microbial carbon metabolism priority by inhibiting the abundance of glucose metabolizing enzymes, gradually replacing glucose as the dominant electron donor. Moreover, 5-100 mg/L 4-CP reduced adenosine triphosphate (ATP) by 15.52-24.67 % and increased reactive oxygen species (ROS) by 31.13-63.47 %, causing severe lipid peroxidation, thus inhibiting the utilization efficiency of glucose. Activated by glucose, 4-CP dechlorination had stronger electron consumption ability than NO2--N reduction (NO3--N > 4-CP > NO2--N), combined with the decreased nirS and nirK genes abundance, resulting in NO2--N accumulation. Compared with the blank group (0 mg/L 4-CP), 5-40 mg/L and 60-100 mg/L 4-CP reduced the secretion of cytochrome c and flavin adenine dinucleotides (FAD), respectively, further decreasing the electron transfer activity of denitrification system. Micropruina, a genus that participated in denitrification based on glucose, was gradually replaced by Candidatus_Microthrix, a genus that possessed 4-CP degradation and denitrification functions after introducing 60-100 mg/L 4-CP.

Mapping of Candidate Genes for Nitrogen Uptake and Utilization in Japonica Rice at Seedling Stage.

Nitrogen (N) is one of the essential nutrients for the growth and development of crops. The adequate application of N not only increases the yield of crops but also improves the quality of agricultural products, but the excessive application of N can cause many adverse effects on ecology and the environment. In this study, genome-wide association analysis (GWAS) was performed under low- and high-N conditions based on 788,396 SNPs and phenotypic traits relevant to N uptake and utilization (N content and N accumulation). A total of 75 QTLs were obtained using GWAS, which contained 811 genes. Of 811 genes, 281 genes showed different haplotypes, and 40 genes had significant phenotypic differences among different haplotypes. Of these 40 genes, 5 differentially expressed genes (Os01g0159250, Os02g0618200, Os02g0618400, Os02g0630300, and Os06g0619000) were finally identified as the more valuable candidate genes based on the transcriptome data sequenced from Longjing31 (low-N-tolerant variety) and Songjing 10 (low-N-sensitive variety) under low- and high-N treatments. These new findings enrich the genetic resources for N uptake and utilization in rice, as well as lay a theoretical foundation for improving the efficiency of N uptake and utilization in rice.

Recovery mechanism of bio-promoters on Cr(VI) suppressed denitrification: Toxicity remediation and enhanced electron transmission.

Although the biotoxicity of heavy metals has been widely studied, there are few reports on the recovery strategy of the inhibited bio-system. This study proposed a combined promoter-I (Primary promoter: l-cysteine, biotin, and cytokinin + Electron-shuttle: PMo12) to recover the denitrification suppressed by Cr(VI). Compared with self-recovery, combined promoter-I shortened the recovery time of 28 cycles, and the recovered reactor possessed more stable long-term operation performance with >95 % nitrogen removal. The biomass increased by 7.07 mg VSS/(cm3 carrier) than self-recovery due to the promoted bacterial reproduction, thereby reducing the toxicity load of chromium per unit biomass. The combined promoter-I strengthened the toxicity remediation by promoting 92.84 % of the intracellular chromium release and rapidly activating anti-oxidative stress response. During toxicity remediation, ROS content quickly decreased, and the PN/PS value was 2.27 times that of self-recovery. PMo12 relieved Cr(VI) inhibition on NO3--N reduction by increasing NAR activity. The enhanced intracellular and intercellular electron transmission benefited from the stimulated NADH, FMN, and Cyt.c secretion by the primary promoter and the improved transmembrane electron transmission by Mo. PMo12 and the primary promoter synergized in regulating community structure and improving microbial richness. This study provided practical approaches for microbial toxicity remediation and maintaining high-efficiency denitrification.

Primary study of the relative and compound biological effectiveness model for boron neutron capture therapy based on nanodosimetry.

BACKGROUND: The current radiobiological model employed for boron neutron capture therapy (BNCT) treatment planning, which relies on microdosimetry, fails to provide an accurate representation the biological effects of BNCT. The precision in calculating the relative biological effectiveness (RBE) and compound biological effectiveness (CBE) plays a pivotal role in determining the therapeutic efficacy of BNCT. Therefore, this study focuses on how to improve the accuracy of the biological effects of BNCT. PURPOSE: The purpose of this study is to propose new radiation biology models based on nanodosimetry to accurately assess RBE and CBE for BNCT. METHODS: Nanodosimetry, rooted in ionization cluster size distributions (ICSD), introduces a novel approach to characterize radiation quality by effectively delineating RBE through the ion track structure at the nanoscale. In the context of prior research, this study presents a computational model for the nanoscale assessment of RBE and CBE. We establish a simplified model of DNA chromatin fiber using the Monte Carlo code TOPAS-nBio to evaluate the applicability of ICSD to BNCT and compute nanodosimetric parameters. RESULTS: Our investigation reveals that both homogeneous and heterogeneous nanodosimetric parameters, as well as the corresponding biological model coefficients α and ß, along with RBE values, exhibit variations in response to varying intracellular 10B concentrations. Notably, the nanodosimetric parameter M 1 C 2 $M_1^{{{\mathrm{C}}}_2}$ effectively captures the fluctuations in model coefficients α and RBE. CONCLUSION: Our model facilitates a nanoscale analysis of BNCT, enabling predictions of nanodosimetric quantities for secondary ions as well as RBE, CBE, and other essential biological metrics related to the distribution of boron. This contribution significantly enhances the precision of RBE calculations and holds substantial promise for future applications in treatment planning.

The Role of Iron Metabolism in Sepsis-associated Encephalopathy: a Potential Target.

Sepsis-associated encephalopathy (SAE) is an acute cerebral dysfunction secondary to infection, and the severity can range from mild delirium to deep coma. Disorders of iron metabolism have been proven to play an important role in a variety of neurodegenerative diseases by inducing cell damage through iron accumulation in glial cells and neurons. Recent studies have found that iron accumulation is also a potential mechanism of SAE. Systemic inflammation can induce changes in the expression of transporters and receptors on cells, especially high expression of divalent metal transporter1 (DMT1) and low expression of ferroportin (Fpn) 1, which leads to iron accumulation in cells. Excessive free Fe2+ can participate in the Fenton reaction to produce reactive oxygen species (ROS) to directly damage cells or induce ferroptosis. As a result, it may be of great help to improve SAE by treatment of targeting disorders of iron metabolism. Therefore, it is important to review the current research progress on the mechanism of SAE based on iron metabolism disorders. In addition, we also briefly describe the current status of SAE and iron metabolism disorders and emphasize the therapeutic prospect of targeting iron accumulation as a treatment for SAE, especially iron chelator. Moreover, drug delivery and side effects can be improved with the development of nanotechnology. This work suggests that treating SAE based on disorders of iron metabolism will be a thriving field.

Altered brain network centrality in patients with orbital fracture: A resting­state functional MRI study.

The present study aimed to investigate potential functional network brain-activity abnormalities in individuals with orbital fracture (OF) using the voxel-wise degree centrality (DC) technique. The present study included 20 patients with OF (12 males and 8 females) and 20 healthy controls (HC; 12 males and 8 females), who were matched for gender, age and educational attainment. Functional magnetic resonance imaging (fMRI) in the resting state has been widely applied in several fields. Receiver operating characteristic (ROC) curves were calculated to distinguish between patients with OF and HCs. In addition, correlation analyses were performed between behavioral performance and average DC values in various locations. The DC technique was used to assess unprompted brain activity. Right cerebellum 9 region (Cerebelum_9_R) and left cerebellar peduncle 2 area (Cerebelum_Crus2_L) DC values of patients with OF were increased compared with those in HCs. Cerebelum_9_R and Cerebelum_Crus2_L had area under the ROC curve values of 0.983 and 1.000, respectively. Patients with OF appear to have several brain regions that exhibited aberrant brain network characteristics, which raises the possibility of neuropathic causes and offers novel therapeutic options.

Future Directions in Optimizing Anesthesia to Reduce Perioperative Acute Kidney Injury.

BACKGROUND: Perioperative acute kidney injury (AKI) is common in surgical patients and is associated with high morbidity and mortality. There are currently few options for AKI prevention and treatment. Due to its complex pathophysiology, there is no efficient medication therapy to stop the onset of the injury or repair the damage already done. Certain anesthetics, however, have been demonstrated to affect the risk of perioperative AKI in some studies. The impact of anesthetics on renal function is particularly important as it is closely related to the prognosis of patients. Some anesthetics can induce anti-inflammatory, anti-necrotic, and anti-apoptotic effects. Propofol, sevoflurane, and dexmedetomidine are a few examples of anesthetics that have protective association with AKI in the perioperative period. SUMMARY: In this study, we reviewed the clinical characteristics, risk factors, and pathogenesis of AKI. Subsequently, the protective effects of various anesthetic agents against perioperative AKI and the latest research are introduced. KEY MESSAGE: This work demonstrates that a thorough understanding of the reciprocal effects of anesthetic drugs and AKI is crucial for safe perioperative care and prognosis of patients. However, more complete mechanisms and pathophysiological processes still need to be further studied.

Controllable and biocompatible 3D bioprinting technology for microorganisms: Fundamental, environmental applications and challenges.

3D bioprinting is a new 3D manufacturing technology, that can be used to accurately distribute and load microorganisms to form microbial active materials with multiple complex functions. Based on the 3D printing of human cells in tissue engineering, 3D bioprinting technology has been developed. Although 3D bioprinting technology is still immature, it shows great potential in the environmental field. Due to the precise programming control and multi-printing pathway, 3D bioprinting technology provides a high-throughput method based on micron-level patterning for a wide range of environmental microbiological engineering applications, which makes it an on-demand, multi-functional manufacturing technology. To date, 3D bioprinting technology has been employed in microbial fuel cells, biofilm material preparation, microbial catalysts and 4D bioprinting with time dimension functions. Nevertheless, current 3D bioprinting technology faces technical challenges in improving the mechanical properties of materials, developing specific bioinks to adapt to different strains, and exploring 4D bioprinting for intelligent applications. Hence, this review systematically analyzes the basic technical principles of 3D bioprinting, bioinks materials and their applications in the environmental field, and proposes the challenges and future prospects of 3D bioprinting in the environmental field. Combined with the current development of microbial enhancement technology in the environmental field, 3D bioprinting will be developed into an enabling platform for multifunctional microorganisms and facilitate greater control of in situ directional reactions.

Polydopamine and calcium functionalized fiber carrier for enhancing microbial attachment and Cr(VI) resistance.

The formation of biofilm determines the performance and stability of biofilm system. Increasing the hydrophilicity of the carrier surface could efficiently accelerate the attachment and growth of microorganisms. Here, the surface of polypropylene (PP) fiber carrier was modified with polydopamine (PDA) and calcium (Ca(II)) to enhance microbial attachment and toxicity resistance. The results of surface characteristic confirmed the self-polymerization of PDA and the chelation mechanism of Ca(II). Subsequently, the biofilm formation experiments were conducted in sequencing batch biofilm reactors using both normal and chromium-containing wastewater. The biofilm on the surface of the modified carrier exhibited better nitrogen removal and Cr(VI) reduction ability. The biomass of the modified carrier was significantly increased, and the maximum microbial attachment amounts in normal wastewater and chrome-containing wastewater were 1153.34 and 511.78 mg/g carrier, respectively. Furthermore, the confocal laser scanning microscope (CLSM) indicated that the modified carrier coated with PDA and Ca(II) were both biocompatible, and the cell activity was significantly increased. 16S rRNA sequencing results showed that the modified carrier efficiently enriched both denitrification bacteria (Thauera and Flavobacterium) and chrome-reducing bacteria (Simplicispira and Arenimonas) to improve system stability and Cr(VI) resistance. Microbial phenotype prediction based on BugBase analysis further verified the enrichment effect of modified carriers on microorganisms responsible for biofilm formation and oxidative stress resistance. Overall, this work proposed a novel functional carrier that could provide references for advancing the application of biofilm systems in wastewater treatment.

Screening for IBs-relative genes by transcriptome analysis and generation IBs-less mutants in Culter alburnus.

Intermuscular bones (IBs), distributed specifically in the myosepta on both sides of lower teleosts, negatively affect palatability and processing. Recent research in zebrafish and several economically important farmed fishes has led to the breakthrough discovery of the mechanism of IBs formation and generation of IBs-loss mutants. This study explored the ossification patterns of IBs in juvenile Culter alburnus. Besides, some key genes and bone-related signaling pathways were identified by transcriptomic data. Furthermore, PCR microarray validation revealed that claudin1 could potentially regulate IBs formation. Additionally, we created several IBs-reduced mutants of C. alburnus by loss of the function of bone morphogenetic proteins 6 (bmp6) gene using CRISPR/Cas9 editing. These results suggested that CRISPR/Cas9-mediated bmp6 knockout was promising approach for breeding IBs-free strain in other cyprinids.