ABSTRACT
This study addresses the widespread use of UV filters (UVFs) in cosmetic and solar products due to the negative effects of UV radiation, particularly in relation to melanoma risk. While these filters offer protection, their extensive application raises concerns about their environmental and health impacts. Organic UVFs, in particular, have been associated with endocrine disruption in aquatic species and coral reef damage. To mitigate these concerns, regulatory limits have been imposed on certain UVFs. Current analytical techniques for UVF determination, such as HPLC-PDA and HPLC-MS/MS, offer high accuracy but are expensive and lack on-site monitoring capabilities. In response, this research aims to develop a rapid and cost-effective method, utilizing voltammetry for organic UVF quantification in complex matrices like sunscreens. Additionally, HPLC-PDA and HPLC-MS/MS are employed for electrochemical methods and device validation. This approach not only addresses the need for efficient UVF analysis but also provides a basis for regulatory compliance and environmental stewardship in the cosmetics industry.
ABSTRACT
Due to a great demand for amylose and cellulose polymeric chromatographic chiral columns, the enantiomeric separation of thiourea derivatives of naringenin was achieved on the different amylose (Chiralpak-IB) and cellulose chiral (Chiralcel-OJ and Chiralcel-OD-3R) columns with varied chromatographic conditions. The isocratic mobile phases used were ethanol and methanol, where ethanol/hexane and methanol/hexane were used as gradient mode and were prepared in volume/volume relation. The separation and resolution factors for all the enantiomers were in the range of 1.25 to 3.47 and 0.48 to 1.75, respectively. The enantiomeric resolution was obtained within 12 min making fast separation. The docking studies confirmed the chiral recognition mechanisms with binding affinities in the range of -4.7 to -5.7 kcal/mol. The reported compounds have good anticoagulant activities and may be used as anticoagulants in the future. Besides, chiral separation is fast and is useful for enantiomeric separation in any laboratory in the world.
Subject(s)
Amylose , Flavanones , Hexanes , Methanol , Stereoisomerism , Cellulose , Polymers , Ethanol , ThioureaABSTRACT
Multicomponent drugs are medications that combine two or more active pharmaceutical ingredients in a single dosage form. These dosage forms improve the patient compliance, reduce the risk of drug interactions, and simplify dosing regimens. However, quality control of these multicomponent dosage forms can be challenging, especially if the final product contains four or more ingredients that are active (comprise stabilizers, preservatives, excipients, and other components). This problem can be more pronounced if the excipients can interfere with the analysis. In this work, a stability indicating assay method was developed and validated (according to the ICH International Guidelines) for the simultaneous determination of hydroquinone (HQ), tretinoin (TRT), hydrocortisone (HCA), butylated hydroxytoluene (BHT), methyl paraben (MP) and propyl paraben (PP) in commercially available pharmaceutical creams. The proposed method is based on gradient elution using X-Bridge C18 (150 × 4.6 mm, 5 µm) column with a flow rate of 1 mL/min. The linear ranges (µg/mL) were 240-560 for HQ, 24-56 for MP, 132-308 for HCA, 6-14 for PP, 12-28 for BHT, 6.6-15 for TRT. During the validation process, the intra- and interday precision and trueness (evaluated as recovery) were found to be below 2.0% and between 100-102%, respectively. System suitability tests (SST) allow validating the herein proposed procedure specifically for pharmaceutical and industrial applications. SST test shows that the reported procedure fulfill with the Guidelines, allowing excellent separation of the analytes with very sensitive, accurate (precise and true) and reproducible quantitation of each analytes. The method was successfully applied in forced degradation studies of the six analytes. Specifically, acid degradation slightly affected HCA and BHT (91% recovery), while alkaline degradation drastically reduced HCA recovery (5.5%) and moderately affected BHT (85%). Photodegradation primarily influenced TRT quantity, and oxidative degradation intensified the BHT peak (130%).
Subject(s)
Parabens , Tretinoin , Humans , Parabens/analysis , Tretinoin/analysis , Hydrocortisone/analysis , Butylated Hydroxytoluene , Excipients , Chromatography, High Pressure Liquid/methods , Hydroquinones/analysisABSTRACT
A new fabric phase sorptive extraction (FPSE) based separation and enrichment method was developed for sensitive determination of two antiepileptic drug molecules, Levetiracetam (LEV) and Lamotrigine (LTG). The analysis of these drug molecules was performed with high-performance liquid chromatography equipped with photodiode array detector (HPLC-PDA) after FPSE. HPLC analysis was carried out by using phenyl hexyl column, under isocratic conditions with the mobile phase composed of pH 3.0 buffer-acetonitrile (77:23 v: v). All parameters affecting the separation and enrichment process were studied and optimized step by step. The linear working range of the developed method was calculated in the range of 10.0-1000.0 ng mL-1 for both the drug molecules (LEV and LTG). The limits of detection of the method (LODs) were calculated as 2.72 and 3.64 ng mL-1, respectively. The relative standard deviation (%RSD) values of the developed method as an indicator of precision were varied between 4.0 and 7.3. The accuracy of the optimized FPSE method was determined by the recovery tests utilizing spiked samples and results were assessed in the range from 94.6 to 106.3%. This is the first application of sol-gel Titania polycaprolactone-polydimethylsiloxane-polycaprolactone (Ti-PCAP-PDMS-PCAP) based FPSE membrane in the determination of antiepileptic drug molecules.
Subject(s)
Anticonvulsants , Titanium , Chromatography, High Pressure Liquid/methods , Lamotrigine , LevetiracetamABSTRACT
Separation and identification of chiral molecules is a topic widely discussed in the literature and of fundamental importance, especially in the pharmaceutical and food fields, both from industrial and laboratory points of view. Several techniques are used to carry out these analyses, but high-performance liquid chromatography is often the "gold standard." The high costs of chiral columns, necessary for this technique, led researchers to look for an alternative, and capillary electrophoresis (CE) is a technique capable of overcoming some of the disadvantages of liquid chromatography, often providing comparable results in terms of sensitivity and robustness. We addressed this topic, already widely discussed in the literature, providing an overview of the last 6 years of the most frequent and recent applications of CE. To make the manuscript more effective, we decided to divide it into paragraphs that represent the main field of application, from enantioseparation in complex matrices (pharmacokinetic studies or toxicological dosage of drugs, analysis of environmental pollutants, and analyses of foods) to quality control analyses on pharmaceutical formulas. About these, which are the fields of most meaningful use, we mentioned some of the most innovative and performing methods, with a look to the future on the application of new materials used, such as chiral selectors, that can make these types of analyses accessible to all, reducing cost, time, and excessive use of toxic solvents.
Subject(s)
Electrophoresis, Capillary , Electrophoresis, Capillary/methods , Chromatography, Liquid , Stereoisomerism , Chromatography, High Pressure Liquid , Pharmaceutical PreparationsABSTRACT
Determination of pharmaceutical active molecules in the biological matrices is crucial in various fields of clinical and pharmaceutical chemistry, e.g., in pharmacokinetic studies, developing new drugs, or therapeutic drug monitoring. Chloramphenicol (CP) is used for treating bacterial infections, and it's one of the first antibiotics synthetically manufactured on a large scale. Fabric phase sorptive extraction (FPSE) was used to determine Chloramphenicol antibiotic residues in milk samples by means of validated HPLC-DAD instrumentation. Cellulose fabric phases modified with polyethylene glycol-block-polypropylene glycol-block-polyethylene glycol triblock copolymer was synthesized using sol-gel synthesis approach (Sol-gel PEG-PPG-PEG) and used for batch-type fabric phase extractions. Experimental variables of the FPSE method for antibiotic molecules were investigated and optimized systematically. The HPLC analysis of chloramphenicol was performed using a C18 column, isocratic elution of trifluoroacetic acid (0.1%), methanol, and acetonitrile (17:53:30) with a flow rate of 1.0 mL/min. The linear range for the proposed method for chloramphenicol (r2 > 0.9982) was obtained in the range of 25.0-1000.0 ng/mL. The limit of detections (LOD) is 8.3 ng/mL, while RSDs% are below 4.1%. Finally, the developed method based on FPSE-HPLC-DAD was applied to milk samples to quantitatively determine antibiotic residues.
Subject(s)
Chloramphenicol , Milk , Animals , Chloramphenicol/analysis , Milk/chemistry , Anti-Bacterial Agents/analysis , Chromatography, High Pressure Liquid/methods , Polyethylene Glycols/analysisABSTRACT
The extraction of berberine was carried out from Berberis vulgaris, Berberis aquifolium, and Hydrastis canadensis plants using ethanol and water (70:30, v/v). The extracted berberine was characterized by ultraviolet-visible and Fourier-transform infrared spectroscopy. The purity of berberine was ascertained by thin-layer chromatography using n-propanol-formic acid-water (95:1:4) and (90:1:9) solvents. hRf values were in the range of 44-49 with compact spots (diameter 0.2-0.4 cm). HPLC was carried out using ammonium acetate buffer and acetonitrile in gradient mode with Zodiac (4.6 × 150 mm, 3 µm) column. The flow rate was 1.0 mL/min and detection was at 220 nm. The values of separation and resolution factors of the standard and the extracted berberine were in the range of 1.13-1.16 and 1.40-1.71, respectively. A comparison has shown that both thin-layer chromatography and high-performance liquid chromatography (HPLC) methods found applications in different situations and requirements. The extracted berberine samples were used to treat Leishmaniosis and the results showed better activity of berberine in comparison to the standard drug Amphotericin B. Briefly, the reported research is a novel and may be used to extract berberine from plants, separation and identification of berberine by thin layer chromatography and HPLC and to treat Leishmaniosis.
Subject(s)
Berberine , Berberine/chemistry , Chromatography, High Pressure Liquid/methods , Chromatography, Thin Layer/methods , Solvents/analysis , WaterABSTRACT
The present study focuses on the development and validation of an HPLC-DAD methodology for the detection of a potent chemotherapeutic agent, Maytansinoid Ravtansine (DM4), and its metabolite, S-methyl-DM4 (S-Me-DM4), in plasma samples. Methodologically, after a simple protein precipitation with acetonitrile and after drying 1 mL of supernatant, the sample (suspended with N,N-Dimethylacetamide, DMA) was directly analyzed by HPLC under isocratic elution using a mobile phase comprising milliQ water and methanol (25:75, v:v), both acidified with 0.1 % v:v formic acid. Employing a flow rate of 1.0 mL/min and a reversed-phase GraceSmart RP18 column thermostated at 40 °C, we achieved complete resolution and separation of DM4 and S-Me-DM4 within 13 min. The optimized injection volume of 20 µL and the wavelength set at 254 nm were utilized for quantitative analyses. Rigorous validation has not only ensured its reliability and reproducibility but has also addressed potential limitations associated with methodological inconsistency. The limit of detection and quantification of the method were 0.025 and 0.06 µg/mL for both the analytes, respectively. The calibration curve showed a good linearity in the range 0.06-20 µg/mL. For both analytes, the intraday precision and trueness were 2.3-8.2 % and -1.1 to 3.1 %, respectively, while the interday values were 0.7-10.1 % and -10.4 to 7.5 %, respectively. The developed methodology enables the concurrent determination and quantification of free DM4 and its metabolite, free S-Me-DM4, making it a valuable tool for assessing the pharmacokinetics and pharmacodynamics of DM4-based therapies. In addition, the procedure was successfully applied to analyse the presence of free DM4 or its metabolite, free S-Me-DM4, in human plasma samples spiked with the 1959-sss/DM4 antibody-drug conjugate (ADC). The utilization of the herein validated methodology allowed to confirm the presence of these analytes, thereby providing insights into their potential release from the ADC structure.
Subject(s)
Maytansine , Humans , Reproducibility of Results , Chromatography, High Pressure Liquid/methods , Pharmaceutical PreparationsABSTRACT
Solid phase microextraction (SPME) is considered simple, ecofriendly, sustainable, cost-effective and timesaving sample preparation mode in comparison with other sample preparation procedures. The researchers always try to develop new sorbents with higher surface area in comparison with other conventional sorbents aiming to enhance the extraction efficiency. In this work for the first time, a comparative study was performed between Ca-BTC MOF (1,3,5-benzenetricarboxylic acid, BTC; metal-organic framework, MOF) and a hybrid Ca-BTC-MCC MOF (microcrystalline cellulose, MCC) by using as model compounds seven drugs with different physicochemical properties. The evaluation of the extraction efficiency of both sorbents were obtained by means of an HPLC/DAD instrument configuration in reversed phase mode under isocratic elution mode. The results indicate that Ca-BTC MOF showed superior extraction efficiency than Ca-BTC-MCC MOF in the case of all analytes except nirmatrelvir and ritonavir. The results highlight that not only the surface area of adsorbents controlled the adsorption capacity, but also other factors have a role in extraction efficiency including morphology of adsorbent and physico-chemical properties of the analytes. It is worth mentioning that this is the first time that a comparative study was performed between Ca-BTC MOF and Ca-BTC-MCC MOF hybrid material.
Subject(s)
Metal-Organic Frameworks , Solid Phase Microextraction , Solid Phase Microextraction/methods , Metal-Organic Frameworks/chemistry , Cellulose/chemistry , Pharmaceutical PreparationsABSTRACT
A polymer-based nanosensor and electrochemical methods were developed for the quantitative analysis of vanillin. The sample preparation was done using nano solid phase micro membrane tip extraction (NSPMMTE). A novel poly(phenylalanine)/TiO2/CPE sensor was built as the working electrode for the first time for the analysis of the vanillin substance. The electrochemical behavior and analytical performance of vanillin were examined in detail by cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV) techniques via the oxidation process. The optimized modules of the DPSV technique that affected the vanillin peak current and peak potential were pH, pulse amplitude, step potential, and deposition time. The electroactive surface areas of bare CPE, TiO2/CPE, and poly(phenylalanine)/TiO2/CPE electrodes were found to be 0.135 cm2, 0.155 cm2, and 0.221 cm2, respectively. The limit of detection (LOD) was 32.6 µg/L in the 0.25-15.0 mg/L working range at pH 7.0. The selectivity of the proposed DPSV method for the determination of vanillin on the modified electrode was investigated in the presence of various organic and inorganic substances, and the determination of vanillin with high recovery was achieved with less than 5% relative error. The analytical application was applied in chocolate samples and the DPSV method was found highly efficient, reproducible, and selective.
Subject(s)
Chocolate , Titanium/chemistry , Polymers/chemistry , Electrochemical Techniques/methods , Electrodes , Carbon/chemistryABSTRACT
Extracellular vesicles (EVs) enriched with bioactive molecules have gained considerable attention in nanotechnology because they are critical to intercellular communication while maintaining low immunological impact. Among biological matrices, urine has emerged as a noninvasive source of extracellular-contained liquid biopsy, currently of interest as a readout for physiological adaptations. Therefore, we aimed to evaluate chronic adaptations of endurance sport practice in terms of urinary EV parameters and evaluated by food consumption assessment. Two balanced groups of 13 inactive controls vs. triathlon athletes were enrolled; their urinary EVs were obtained by differential ultracentrifugation and analyzed by dynamic light scattering and transmission electron and atomic force microscopy. The cargo was analyzed by means of purine and miRNA content through HPLC-UV and qRT-PCR. Specific urinary EV signatures differentiated inactive versus endurance-trained in terms of peculiar shape. Particularly, a spheroid shape, smaller size, and lower roughness characterize EVs from triathletes. Metabolic and regulatory miRNAs often associated with skeletal muscle (i.e., miR378a-5p, miR27a-3p, miR133a, and miR206) also accounted for a differential signature. These miRNAs and guanosine in urinary EVs can be used as a readout for metabolic status along with the shape and roughness of EVs, novel informative parameters that are rarely considered. The network models allow scholars to entangle nutritional and exercise factors related to EVs' miRNA and purine content to depict metabolic signatures. All in all, multiplex biophysical and molecular analyses of urinary EVs may serve as promising prospects for research in exercise physiology.
Subject(s)
Body Fluids , Extracellular Vesicles , MicroRNAs , Urinary Tract , Humans , MicroRNAs/metabolism , Urinary Tract/metabolism , Extracellular Vesicles/metabolism , Body Fluids/metabolism , Purines/metabolismABSTRACT
Nowadays, it is vital to have new, complete, and rapid methods to screen and follow pharmacotoxicological and forensic cases. In this context, an important role is undoubtedly played by liquid chromatography-tandem mass spectrometry (LC-MS/MS) thanks to its advanced features. This instrument configuration can offer comprehensive and complete analysis and is a very potent analytical tool in the hands of analysts for the correct identification and quantification of analytes. The present review paper discusses the applications of LC-MS/MS in pharmacotoxicological cases because it is impossible to ignore the importance of this powerful instrument for the rapid development of pharmacological and forensic advanced research in recent years. On one hand, pharmacology is fundamental for drug monitoring and helping people to find the so-called "personal therapy" or "personalized therapy". On the other hand, toxicological and forensic LC-MS/MS represents the most critical instrument configuration applied to the screening and research of drugs and illicit drugs, giving critical support to law enforcement. Often the two areas are stackable, and for this reason, many methods include analytes attributable to both fields of application. In this manuscript, drugs and illicit drugs were divided in separate sections, with particular attention paid in the first section to therapeutic drug monitoring (TDM) and clinical approaches with a focus on central nervous system (CNS). The second section is focused on the methods developed in recent years for the determination of illicit drugs, often in combination with CNS drugs. All references considered herein cover the last 3 years, except for some specific and peculiar applications for which some more dated but still recent articles have been considered.
Subject(s)
Illicit Drugs , Tandem Mass Spectrometry , Humans , Chromatography, Liquid/methods , Tandem Mass Spectrometry/methods , Forensic Medicine , Drug MonitoringABSTRACT
A fast procedure obtained by the combination of fabric phase extraction (FPSE) with high performance liquid chromatography (HPLC) has been developed and validated for the quantification of favipiravir (FVP) in human plasma and breast milk. A sol-gel polycaprolactone-block-polydimethylsiloxane-block-polycaprolactone (sol-gel PCAP-PDMS-PCAP) coated on 100% cellose cotton fabric was selected as the most efficient membrane for FPSE in human plasma and breast milk samples. HPLC-UV analysis were performed using a RP C18 column under isocratic conditions. Under these optimezed settings, the overall chromatographic analysis time was limited to only 5 min without encountering any observable matrix interferences. Following the method validation procedure, the herein assay shows a linear calibration curve over the range of 0.2-50 µg/mL and 0.5-25 µg/mL for plasma and breast milk, respectively. The method sensitivities in terms of limit of detection (LOD) and limit of quantification (LOQ), validated in both the matrices, have been found to be 0.06 and 0.2 µg/mL for plasma and 0.15 and 0.5 µg/mL for milk, respectively. Intraday and interday precision and trueness, accordingly to the International Guidelines, were validated and were below 3.61% for both the matrices. The herein method was further tested on real samples in order to highlight the applicability and the advantage for therapeutic drug monitoring (TDM) applications. To the best of our knowledge, this is the first validated FPSE-HPLC-UV method in human plasma and breast milk for TDM purposes applied on real samples. The validated method provides fast, simple, cost reduced, and sensitive assay for the direct quantification of favipiravir in real biological matrices, also appliyng a well-known rugged and cheap instrument configuration.
Subject(s)
Milk, Human , Pyrazines , Female , Humans , Chromatography, High Pressure Liquid/methods , Limit of DetectionABSTRACT
Polymer colloids have remarkable features and are gaining importance in many areas of research including medicinal science. Presently, the innovation of cancer drugs is at the top in the world. Polymer colloids have been used as drug delivery and diagnosis agents in cancer treatment. The polymer colloids may be of different types such as micelles, liposomes, emulsions, cationic carriers, and hydrogels. The current article describes the state-of-the-art polymer colloids for the treatment of cancer. The contents of this article are about the role of polymeric nanomaterials with special emphasis on the different types of colloidal materials and their applications in targeted cancer therapy including cancer diagnoses. In addition, attempts are made to discuss future perspectives. This article will be useful for academics, researchers, and regulatory authorities.
ABSTRACT
We report the case of a 54-year-old man who died in a motorcycle accident due to loss of control of the vehicle on a viaduct. No other vehicles were apparently involved, except for a car hit by the motorcycle after it fell. A post-mortem CT scan (computed tomography scan) was performed showing complex head trauma with a subarachnoid hemorrhage and multiple skull and facial bone fractures. A forensic cinematic reconstruction performed by an engineer was needed to exclude other incident causes other than the loss of control. The multidisciplinary approach that included autopsy findings, a cinematic reconstruction, a helmet test and an examination played a key role in clarifying the dynamics of the accident, allowing us to explain how the death occurred despite the motorcyclist's helmet use. The cause of death was identified as a penetrating head trauma with cerebral material exposure, produced by the impact of the head against a fixed bolt in the guardrail base. Despite the use of the helmet, the impact force was enough to render the protection ineffective and allowed the bolt to penetrate through the helmet and the skull.
ABSTRACT
This study was designed to seek the phytochemical analysis, antioxidant, enzyme inhibition, and toxicity potentials of methanol and dichloromethane (DCM) extracts of aerial and root parts of Crotalaria burhia. Total bioactive content, high-performance liquid chromatography-photodiode array detector (HPLC-PDA) polyphenolic quantification, and ultra-high performance liquid chromatography-mass spectrometry (UHPLC-MS) analysis were utilized to evaluate the phytochemical composition. Antioxidant [including 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH)], 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonic acid (ABTS), ferric reducing antioxidant power assay (FRAP), cupric reducing antioxidant capacity CUPRAC, phosphomolybdenum, and metal chelation assays] and enzyme inhibition [against acetylcholinesterase (AChE), butyrylcholinesterase (BChE), α-glucosidase, α-amylase, and tyrosinase] assays were carried out for biological evaluation. The cytotoxicity was tested against MCF-7 and MDA-MB-231 breast cell lines. The root-methanol extract contained the highest levels of phenolics (37.69 mg gallic acid equivalent/g extract) and flavonoids (83.0 mg quercetin equivalent/g extract) contents, and was also the most active for DPPH (50.04 mg Trolox equivalent/g extract) and CUPRAC (139.96 mg Trolox equivalent /g extract) antioxidant assays. Likewise, the aerial-methanol extract exhibited maximum activity for ABTS (94.05 mg Trolox equivalent/g extract) and FRAP (64.23 mg Trolox equivalent/g extract) assays. The aerial-DCM extract was noted to be a convincing cholinesterase (AChE; 4.01 and BChE; 4.28 mg galantamine equivalent/g extract), and α-glucosidase inhibitor (1.92 mmol acarbose equivalent/g extract). All of the extracts exhibited weak to modest toxicity against the tested cell lines. A considerable quantities of gallic acid, catechin, 4-OH benzoic acid, syringic acid, vanillic acid, 3-OH-4-MeO benzaldehyde, epicatechin, p-coumaric acid, rutin, naringenin, and carvacrol were quantified via HPLC-PDA analysis. UHPLC-MS analysis of methanolic extracts from roots and aerial parts revealed the tentative identification of important phytoconstituents such as polyphenols, saponins, flavonoids, and glycoside derivatives. To conclude, this plant could be considered a promising source of origin for bioactive compounds with several therapeutic uses.
ABSTRACT
This work was undertaken to explore the phytochemical composition, antioxidant, and enzyme-inhibiting properties of Neurada procumbens L. extracts/fractions of varying polarity (methanol extract and its fractions including n-hexane, chloroform, n-butanol, and aqueous fractions). A preliminary phytochemical study of all extracts/fractions, HPLC-PDA polyphenolic quantification, and GC-MS analysis of the n-hexane fraction were used to identify the phytochemical makeup. Antioxidant (DPPH), enzyme inhibition (against xanthine oxidase, carbonic anhydrase, and urease enzymes), and antibacterial activities against seven bacterial strains were performed for biological investigation. The GC-MS analysis revealed the tentative identification of 22 distinct phytochemicals in the n-hexane fraction, the majority of which belonged to the phenol, flavonoid, sesquiterpenoid, terpene, fatty acid, sterol, and triterpenoid classes of secondary metabolites. HPLC-PDA analysis quantified syringic acid, 3-OH benzoic acid, t-ferullic acid, naringin, and epicatechin in a significant amount. All of the studied extracts/fractions displayed significant antioxidant capability, with methanol extract exhibiting the highest radical-scavenging activity, as measured by an inhibitory percentage of 81.4 ± 0.7 and an IC50 value of 1.3 ± 0.3. For enzyme inhibition experiments, the n-hexane fraction was shown to be highly potent against xanthine oxidase and urease enzymes, with respective IC50 values of 2.3 ± 0.5 and 1.1 ± 0.4 mg/mL. Similarly, the methanol extract demonstrated the strongest activity against the carbonic anhydrase enzyme, with an IC50 value of 2.2 ± 0.4 mg/mL. Moreover, all the studied extracts/fractions presented moderate antibacterial potential against seven bacterial strains. Molecular docking of the five molecules ß-amyrin, campesterol, ergosta-4,6,22-trien-3ß-ol, stigmasterol, and caryophyllene revealed the interaction of these ligands with the investigated enzyme (xanthine oxidase). The results of the present study suggested that the N. procumbens plant may be evaluated as a possible source of bioactive compounds with multifunctional therapeutic applications.
Subject(s)
Carbonic Anhydrases , Catechin , Plants, Medicinal , Triterpenes , 1-Butanol , Anti-Bacterial Agents/pharmacology , Antioxidants/chemistry , Benzoic Acid , Chloroform , Fatty Acids , Flavonoids/analysis , Flavonoids/pharmacology , Hexanes , Ligands , Metabolomics , Methanol/chemistry , Molecular Docking Simulation , Phenols/analysis , Phytochemicals/analysis , Phytochemicals/pharmacology , Plant Extracts/chemistry , Plants, Medicinal/metabolism , Stigmasterol , Terpenes , Trientine , Urease , Xanthine OxidaseABSTRACT
The presence of triclosan in water is toxic to human beings, hazardous to the environment and creates side effects and problems because this is an endocrine-disturbing water pollutant. Therefore, there is a great need for the separation of this notorious water pollutant at an effective, economic and eco-friendly level. The interface sorption was achieved on synthesized ionic liquid-based nanocomposites. An N-methyl butyl imidazolium bromide ionic liquid copper oxide nanocomposite was prepared using green methods and characterized by using proper spectroscopic methods. The nanocomposite was used to remove triclosan in water with the best conditions of time 30 min, concentration 100 µg/L, pH 8.0, dose 1.0 g/L and temperature 25 °C, with 90.2 µg/g removal capacity. The results obeyed Langmuir, Temkin and D-Rs isotherms with a first-order kinetic and liquid-film-diffusion kinetic model. The positive entropy value was 0.47 kJ/mol K, while the negative value of enthalpy was -0.11 kJ/mol. The negative values of free energy were -53.18, -74.17 and -76.14 kJ/mol at 20, 25 and 30 °C. These values confirmed exothermic and spontaneous sorption of triclosan. The combined effects of 3D parameters were also discussed. The supramolecular model was developed by simulation and chemical studies and suggested electrovalent bonding between triclosan and N-methyl butyl imidazolium bromide ionic liquid. Finally, this method is assumed as valuable for the elimination of triclosan in water.
Subject(s)
Ionic Liquids , Nanocomposites , Triclosan , Water Pollutants, Chemical , Water Pollutants , Water Purification , Adsorption , Bromides , Humans , Hydrogen-Ion Concentration , Kinetics , Thermodynamics , Water/chemistry , Water Pollutants, Chemical/chemistry , Water Purification/methodsABSTRACT
Common bean (Phaseolus vulgaris) represents one of the most famous foods with antiobesity activity showing a significant efficacy against fat accumulation, insulin resistance and dyslipidaemia. In this work, two Italian varieties of common bean, i.e., Tondino del Tavo and Cannellino Bio, from the centre of Italy were studied to characterise their phenolic profile by HPLC-PDA in relation to different fractions after a straightforward extraction procedure. Antioxidant property and enzymatic inhibition power were also evaluated in order to delineate a possible biological profile. Results show a considerable phenolic content (0.79 and 1.1 µg/mg of 3-hydroxybenzoic acid for hexane extract of Tondino del Tavo and Cannellino Bio, respectively; 0.30 µg/mg p-coumaric acid for n-hexane extract of Tondino del Tavo) for both varieties, and a strong antioxidant activity according to the major phenolic concentration of the extracts. The anti-inflammatory activity of the decoction extracts was also investigated through a zymosan-induced edema formation assay, revealing a moderate ability for both of them. These preliminary data prompt us to further explore the nutrient components of these two varieties in the future.
ABSTRACT
Human postmortem skeletal muscles are a unique source of satellite cells for skeletal muscle regenerative studies. Presomite and somite satellite cells obtained by postmortem muscles have been established as populations of human skeletal muscle precursor cells able to proliferate and differentiate in vitro. It is extremely interesting to have access to a large amount of postmortem human skeletal muscle precursor cells, especially from craniofacial as well as limb skeletal muscles in order to evaluate their potential application not only for the fundamental understanding of muscle physiology and diseases but also for drug testing in a challenging 3D-shaping muscles like skeletal muscle microphysiological systems.