ABSTRACT
OBJECTIVE: This study aims to synthesize, characterize, and assess the penetration of hydrogen peroxide (HP), color change (CC), and surface morphology changes after the application of two distinct nano-hydroxyapatite (nano-HAp). METHODS: Two nano-HAp were previously synthesized by co-precipitation: one with rod-shaped particles (RS) and the other with spherical-shaped particles (SS). The surface charge of the nano-HAp particles was determined at varying pH levels and characterized by X-ray diffraction patterns and Fourier transform infrared spectroscopy. The morphology of the samples was assessed using scanning electron microscopy (SEM). The nano-HAp particles were applied before the dental bleaching procedure. Forty teeth were divided into four groups (nâ¯=â¯10) according to the bleaching treatment: no treatment, bleaching with 35% HP only, RS application and bleaching with 35% HP, and SS application and bleaching with 35% HP. HP concentration (µg mL-1) was measured using UV-Vis, while CC was evaluated with a digital spectrophotometer (ΔEab, ΔE00 and WID). Additionally, four teeth from each group were selected for SEM analysis. Statistical analysis encompassed one-way ANOVA, Tukey's, and Dunnet's tests. RESULTS: RS and SS were successfully synthesized by coprecipitation, primarily differing in pH during synthesis. Both variations of nano-HAp morphology significantly reduced HP diffusion into the pulp chamber (p < 0.001). Regarding enamel morphology, groups analyzed post dental bleaching exhibited greater HAp deposition on the enamel surface. Notably, this deposition did not impede CC. SIGNIFICANCE: The utilization of different nano-HAp morphologies prior to dental bleaching appears to be a promising strategy for mitigating adverse effects associated with dental bleaching procedures.
ABSTRACT
BACKGROUND: At low concentrations used for in-office bleaching gels, such as 6% HP, gingival barrier continues to be performed. If we take into account that, in the at-home bleaching technique, no barrier is indicated, it seems that the use of a gingival barrier fails to make much sense when bleaching gel in low concentration is used for in-office bleaching. OBJECTIVE: This double-blind, split-mouth, randomized clinical trial evaluated the gingival irritation (GI) of in-office bleaching using 6% hydrogen peroxide (HP) with and without a gingival barrier in adolescents, as well as color change and the impact of oral condition on quality of life. METHODOLOGY: Overall, 60 participants were randomized into which side would or would not receive the gingival barrier. In-office bleaching was performed for 50 minutes with 6% HP in three sessions. The absolute risk and intensity of GI were assessed with a visual analogue scale. Color change was assessed using a digital spectrophotometer and color guides. The impact of oral condition on quality of life was assessed using the Brazilian version of the Oral Health Impact Profile (α=0.05). RESULTS: The proportion of patients who presented GI for the "with barrier" group was 31.6% and for the "without barrier" group, 30% (p=1.0). There is an equivalence for the evaluated groups regarding GI intensity (p<0.01). Color change was detected with no statistical differences (p>0.29). There was a significant impact of oral condition on quality of life after bleaching (p<0.001). CONCLUSIONS: The use or not of the gingival barrier for in-office bleaching with 6% HP was equivalent for GI, as well as for bleaching efficacy, with improvement in the impact of oral condition on quality of life.
Subject(s)
Dentin Sensitivity , Tooth Bleaching Agents , Tooth Bleaching , Humans , Adolescent , Hydrogen Peroxide , Tooth Bleaching/adverse effects , Tooth Bleaching/methods , Tooth Bleaching Agents/adverse effects , Quality of Life , Treatment Outcome , Dentin Sensitivity/chemically induced , GelsABSTRACT
BACKGROUND: Light-cured resins are widely used as gingival barriers to protect the gums from highly concentrated peroxides used in tooth bleaching. The impact of barrier brand on clinical outcomes is typically considered negligible. However, there is limited evidence on the effects of different brands on operator experience, barrier adaptation, and patient comfort. OBJECTIVE: This clinical trial assessed the impact of four commercial gingival barrier brands (Opaldam, Topdam, Lysadam, and Maxdam) on operator perception, adaptation quality, and patient comfort. METHODS: Twenty-one undergraduate students placed gingival barriers in a randomized sequence using blinded syringes. Photographs of the barriers were taken from frontal and incisal perspectives. After bleaching procedures, operators rated handling features and safety using Likert scale forms. Two experienced evaluators independently assessed barrier adaptation quality on a scale from 1 (perfect) to 5 (unacceptable). The absolute risk of barrier-induced discomfort was recorded. Data were analyzed using Friedman and Chi-square tests (α = 0.05). RESULTS: Opaldam and Topdam received the highest scores in most handling features, except for removal, which was similar among all brands. No significant difference was observed in barrier adaptation quality between the evaluated brands. Discomforts were mainly reported in the upper dental arch, with Maxdam having the highest absolute risk (35% for this arch and 24% overall). CONCLUSIONS: This study suggests that gingival barrier brands can influence operator perception and patient comfort. Opaldam and Topdam were preferred by operators, but all brands demonstrated comparable adaptation quality. CLINICAL TRIAL REGISTRATION: The study was nested in a randomized clinical trial registered in the Brazilian Clinical Trials Registry under identification number RBR-9gtr9sc.
Subject(s)
Dentin Sensitivity , Tooth Bleaching Agents , Tooth Bleaching , Tooth , Humans , Dentin Sensitivity/chemically induced , Dentin Sensitivity/prevention & control , Dentin Sensitivity/drug therapy , Hydrogen Peroxide , Patient Comfort , Perception , Tooth Bleaching/adverse effects , Tooth Bleaching Agents/adverse effects , Treatment OutcomeABSTRACT
Abstract At low concentrations used for in-office bleaching gels, such as 6% HP, gingival barrier continues to be performed. If we take into account that, in the at-home bleaching technique, no barrier is indicated, it seems that the use of a gingival barrier fails to make much sense when bleaching gel in low concentration is used for in-office bleaching. Objective This double-blind, split-mouth, randomized clinical trial evaluated the gingival irritation (GI) of in-office bleaching using 6% hydrogen peroxide (HP) with and without a gingival barrier in adolescents, as well as color change and the impact of oral condition on quality of life. Methodology Overall, 60 participants were randomized into which side would or would not receive the gingival barrier. In-office bleaching was performed for 50 minutes with 6% HP in three sessions. The absolute risk and intensity of GI were assessed with a visual analogue scale. Color change was assessed using a digital spectrophotometer and color guides. The impact of oral condition on quality of life was assessed using the Brazilian version of the Oral Health Impact Profile (α=0.05). Results The proportion of patients who presented GI for the "with barrier" group was 31.6% and for the "without barrier" group, 30% (p=1.0). There is an equivalence for the evaluated groups regarding GI intensity (p<0.01). Color change was detected with no statistical differences (p>0.29). There was a significant impact of oral condition on quality of life after bleaching (p<0.001). Conclusions The use or not of the gingival barrier for in-office bleaching with 6% HP was equivalent for GI, as well as for bleaching efficacy, with improvement in the impact of oral condition on quality of life.
ABSTRACT
OBJECTIVE: Despite the availability of in-office bleaching gels with a 6% concentration of hydrogen peroxide (HP), these gels have not been evaluated in younger patients. They are commercially available with a tip, associated or not with a brush, where the tip with a brush spreads the gel over the entire surface to have a smaller thickness (thin layer) since the manufacturers indicate the application of a thin layer of gel. This randomized, split-mouth, double-blind clinical trial evaluated the efficacy of in-office bleaching with 6% HP in adolescents using different application tips, as well tooth sensitivity (TS) and aesthetic self-perception. METHODOLOGY: Sixty participants were randomized for 6% HP self-mixing bleaching gel tip design: without brush and with brush. In-office bleaching was performed in 3 sessions of 50 minutes. Color change was evaluated using a digital spectrophotometer (ΔE ab , ΔE 00 , and ΔWI D ) and color guide (ΔSGU), the absolute risk and intensity of TS with a visual analogue scale and aesthetic self-perception with the oral aesthetic scale (a=0.05). RESULTS: The groups achieved similar bleaching regardless of the application tip (p>0.05). However, only for ΔWI D , a significant mean difference (MD) was observed in the third week (MD 2.3; 95% CI 1.2 to 3.3; p < 0.001) and at one month (MD 1.6; 95% CI 0.6 to 2.6; p < 0.03) favoring the tip without brush. Regarding TS, 45% in the tip-without-brush group and 33% in the tip-with-brush group reported TS (odds ratio 0.61; 95% CI 0.29 to 1.28; p<0.02), with low TS intensity (MD 0.05; 95% CI -0.06 to 0.17; p>0.36). All patients reported improved aesthetic self-perception after bleaching (MD -1.3; 95% -1.8 to -0.9; p<0.001). CONCLUSIONS: Regardless of the tip used bleaching with 6% HP achieved a bleaching efficacy and improved the aesthetic self-perception. However, a lower risk of TS for application using the tip with brush was observed.
Subject(s)
Dentin Sensitivity , Tooth Bleaching Agents , Tooth Bleaching , Humans , Adolescent , Hydrogen Peroxide , Treatment Outcome , GelsABSTRACT
OBJECTIVES: This is a double-blind, split-mouth, randomized clinical study that aims to evaluate the influence of bulk-fill composite packaging presented in syringes (BSy) and capsules (BCa), and the effect of selective enamel etching (SEE) on the clinical performance of class I and II bulk-fill resin composite restorations after 24 months. METHODOLOGY: A total of 295 class I or class II restorations were performed on 70 patients. One universal adhesive was applied in all restorations. SEE was used in 148 restorations and self-etching mode (SET) in 147 restorations. After the adhesive application, cavities were restored with Filtek Bulk-fill Posterior Restorative in syringes (BSy), Filtek One Bulk-fill in capsules (BCa), or Filtek Supreme Ultra in syringes with the incremental technique (In). All restorations were evaluated using the FDI criteria after one week and after six, 12, and 24 months. Kaplan-Meier survival analysis and Pearson's Chi-square test were used (α=0.05) for statistical analysis. RESULTS: After 24 months, 62 patients were evaluated and four restorations were lost due to fracture (one for SEEBSy, two for SEEIn, and one for SETIn). No significant differences in the fracture and retention rate were found between groups (p>0.05). SEE showed significantly fewer marginal adaptation defects than SET (p<0.05). BCa and BSy groups showed fewer marginal discrepancies compared to In (p<0.05). Restorations performed with BCa showed less color mismatch than BSy or In (p<0.05). CONCLUSION: Although all restorations exhibited satisfactory clinical performance after 24 months of clinical service, the clinical behavior of class I and II restorations' improved when performed with a bulk-fill composite in capsules, mainly when associated with a universal adhesive applied with SEE.
Subject(s)
Dental Caries , Dental Restoration, Permanent , Humans , Dental Restoration, Permanent/methods , Composite Resins , Dental Enamel , MouthABSTRACT
BACKGROUND: Topical application of calcium-containing bioactive desensitizers (CBs) has been used to minimize bleaching-induced tooth sensitivity (TS). This study answered the research question "Is the risk of TS lower when CBs are used with dental bleaching in adults compared with bleaching without desensitizers?" TYPES OF STUDIES REVIEWED: The authors included randomized clinical trials comparing topical CB application with a placebo or no intervention during bleaching. Searches for eligible articles were performed in MEDLINE via PubMed, Cochrane Library, Brazilian Library in Dentistry, Latin American and Caribbean Health Sciences Literature, Scopus, Web of Science, Embase, and gray literature without language and date restrictions and updated in September 2022. The risk of bias was evaluated using Risk of Bias Version 2.0. The authors conducted meta-analyses with the random-effects model. The authors assessed heterogeneity with the Cochrane Q test, I2 statistics, and prediction interval. The authors used the Grading of Recommendations Assessment, Development and Evaluation approach to assess the certainty of the evidence. RESULTS: After database screening, 22 studies remained, with most at high risk of bias. No difference in the risk of TS was detected (risk ratio, 0.95; 95% CI, 0.90 to 1.01; P = .08, low certainty). In a visual analog scale, the intensity of TS (mean difference, -0.98; 95% CI, -1.36 to -0.60; P < .0001, very low certainty) was lower for the CB group. The color change was unaffected (P > .08). PRACTICAL IMPLICATIONS: Although topical CB dental bleaching did not reduce the risk of TS and color change, these agents slightly reduced the TS intensity, but the certainty of the evidence is very low.
Subject(s)
Dentin Sensitivity , Tooth Bleaching Agents , Tooth Bleaching , Adult , Humans , Tooth Bleaching Agents/therapeutic use , Calcium/adverse effects , Dentin Sensitivity/drug therapy , BrazilABSTRACT
STATEMENT OF PROBLEM: Intraoral scanning has been reported to be preferred by patients over conventional impression making. Nevertheless, information regarding patient-related outcomes for conventional impression making and digital scanning is sparse. PURPOSE: The purpose of this systematic review and meta-analysis was to analyze patient-related outcomes of intraoral scanning and conventional impression methods. The primary outcomes evaluated were patient preference and satisfaction, and the secondary outcomes discomfort, nausea, unpleasant taste, breathing difficulty, pain, and anxiety. MATERIAL AND METHODS: Electronic and manual searches were performed for clinical trials that evaluated patient-related outcomes for intraoral scanning and conventional impression making for prosthetic rehabilitation. The Cochrane Collaboration risk of bias tool and Newcastle-Ottawa scale were used to assess the quality of the studies. Random-effects models using mean difference were used for meta-analyses. Heterogeneity was assessed using the Cochran Q test and I2 statistics (α=.05). RESULTS: The search strategy identified 1626 articles, and 11 studies were included in the meta-analyses. Patients preferred intraoral scanning to conventional impression making. The mean difference for patient preference was 15.02 (95% confidence interval of 8.33 - 21.73; P<.001). Discomfort, absence of nausea, absence of unpleasant taste, and absence of breathing difficulty were also significantly different (P<.05). CONCLUSIONS: Intraoral scanning is a suitable alternative to conventional impression procedures, promoting less discomfort for patients sensitive to taste, nausea, and breathing difficulty than when conventional impression making techniques are used.
Subject(s)
Dental Impression Technique , Patient Preference , Humans , Computer-Aided DesignABSTRACT
Abstract Despite the availability of in-office bleaching gels with a 6% concentration of hydrogen peroxide (HP), these gels have not been evaluated in younger patients. They are commercially available with a tip, associated or not with a brush, where the tip with a brush spreads the gel over the entire surface to have a smaller thickness (thin layer) since the manufacturers indicate the application of a thin layer of gel. Objective This randomized, split-mouth, double-blind clinical trial evaluated the efficacy of in-office bleaching with 6% HP in adolescents using different application tips, as well tooth sensitivity (TS) and aesthetic self-perception. Methodology Sixty participants were randomized for 6% HP self-mixing bleaching gel tip design: without brush and with brush. In-office bleaching was performed in 3 sessions of 50 minutes. Color change was evaluated using a digital spectrophotometer (ΔE ab , ΔE 00 , and ΔWI D ) and color guide (ΔSGU), the absolute risk and intensity of TS with a visual analogue scale and aesthetic self-perception with the oral aesthetic scale (a=0.05). Results The groups achieved similar bleaching regardless of the application tip (p>0.05). However, only for ΔWI D , a significant mean difference (MD) was observed in the third week (MD 2.3; 95% CI 1.2 to 3.3; p < 0.001) and at one month (MD 1.6; 95% CI 0.6 to 2.6; p < 0.03) favoring the tip without brush. Regarding TS, 45% in the tip-without-brush group and 33% in the tip-with-brush group reported TS (odds ratio 0.61; 95% CI 0.29 to 1.28; p<0.02), with low TS intensity (MD 0.05; 95% CI -0.06 to 0.17; p>0.36). All patients reported improved aesthetic self-perception after bleaching (MD -1.3; 95% -1.8 to -0.9; p<0.001). Conclusions Regardless of the tip used bleaching with 6% HP achieved a bleaching efficacy and improved the aesthetic self-perception. However, a lower risk of TS for application using the tip with brush was observed.
ABSTRACT
Abstract Objectives This is a double-blind, split-mouth, randomized clinical study that aims to evaluate the influence of bulk-fill composite packaging presented in syringes (BSy) and capsules (BCa), and the effect of selective enamel etching (SEE) on the clinical performance of class I and II bulk-fill resin composite restorations after 24 months. Methodology A total of 295 class I or class II restorations were performed on 70 patients. One universal adhesive was applied in all restorations. SEE was used in 148 restorations and self-etching mode (SET) in 147 restorations. After the adhesive application, cavities were restored with Filtek Bulk-fill Posterior Restorative in syringes (BSy), Filtek One Bulk-fill in capsules (BCa), or Filtek Supreme Ultra in syringes with the incremental technique (In). All restorations were evaluated using the FDI criteria after one week and after six, 12, and 24 months. Kaplan-Meier survival analysis and Pearson's Chi-square test were used (α=0.05) for statistical analysis. Results After 24 months, 62 patients were evaluated and four restorations were lost due to fracture (one for SEEBSy, two for SEEIn, and one for SETIn). No significant differences in the fracture and retention rate were found between groups (p>0.05). SEE showed significantly fewer marginal adaptation defects than SET (p<0.05). BCa and BSy groups showed fewer marginal discrepancies compared to In (p<0.05). Restorations performed with BCa showed less color mismatch than BSy or In (p<0.05). Conclusion Although all restorations exhibited satisfactory clinical performance after 24 months of clinical service, the clinical behavior of class I and II restorations' improved when performed with a bulk-fill composite in capsules, mainly when associated with a universal adhesive applied with SEE.
ABSTRACT
This in vitro study aimed to evaluate the effect of different bonding strategies on the micro-shear bond strength (µSBS) of luting agents to CAD−CAM composites. Surface scanning electron microscopy (SEM) and spectroscopy by energy-dispersive X-ray spectroscopy (EDS) were performed to analyze the surfaces of the composite before and after bonding treatment. Three CAD−CAM composites were evaluated: Lava Ultimate restorative (LU), Brava Blocks (BR), and Vita Enamic (VE). The LU and BR surfaces were sandblasted using aluminum oxide, while the VE surfaces were etched using a 5% hydrofluoric acid gel according to the manufacturers' recommendations. All surfaces were subjected to the following bonding strategies (n = 15): adhesive with silane and MDP (ScotchBond Universal, 3M Oral Care, St Paul, MI, USA); adhesive with MDP (Ambar Universal, FGM, Joinville, Brazil); adhesive without silane or MDP (Prime&Bond Elect, Dentsply Sirona, Charlotte, NC, USA), pure silane without MDP (Angelus, Londrina, Brazil), and pure silane with MDP (Monobond N, Ivoclar Vivadent, Schaan, Liechtenstei). Afterwards, tygons were filled with RelyX Ultimate (3M Oral Care), AllCem (FGM), or Enforce (Dentsply Sirona), which were light-cured and subjected to the µSBS test. Data were analyzed using two-way ANOVA and Bonferroni's post hoc test (α = 0.05). Additional blocks (n = 15) were subjected to scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) before and after the surface treatment. The µSBS values on VE surfaces were higher than those observed on LU and BR surfaces (p < 0.001). Silane without MDP (Allcem) promoted the highest µSBS values, while silane with MDP (RelyX Ultimate) provided the highest values among all bonding strategies (p < 0.001). Enforce promoted no significant difference in µSBS values. SEM and EDS analyses detected noticeable changes to the surface morphology and composition after the surface treatment. The effectiveness of the bonding strategy may vary according not only to the CAD−CAM composite but also to resin cement/bonding agent/silane used.
ABSTRACT
Aim: The development of postoperative pain following root canal instrumentation may impair patient's comfort and undermine their trust in the dentist. This study assessed the effect of root canal instrumentation techniques (rotary (PTN; ProTaper Next®) and reciprocating (R; Reciproc®)) on the postoperative pain intensity (primary outcome) and tenderness on biting (secondary outcome) of patients' asymptomatic molars. Methodology: This study protocol was registered with ReBec-WHO (U1111-1182-2800). From a pool of 112 patients evaluated for eligibility (healthy adults (≤18 years old)), with a single asymptomatic molar (maxillary or mandibular) indicated for root canal treatment, diagnosed with asymptomatic irreversible pulpitis (including chronic hyperplastic pulpitis), 75 were randomly allocated in similar proportions to receive the intervention (two-appointment root canal therapy) in either the PTN or R group. The allocated procedures were performed using standardized protocols. Participants (blinded to the instrumentation technique) rated their pain intensity at 6, 12 and 24 h and from day 2 to day 7 following the root canal instrumentation appointment using a VAS and an NRS; the ibuprofen tablets taken and the presence of tenderness on biting were recorded. The instrumentation time was registered. Univariate and multivariate statistics measured the effect of independent variables on the outcomes. Results: From the 75 patients allocated, 8 patients (4 from each group) were lost; in total, 33 patients were analyzed in the PTN group and 34 in the R group. The frequencies of postoperative pain (p > 0.05) and tenderness on biting (p > 0.05) were similar between groups. The medication intake (mean of 1.31 tablets) and the time of instrumentation (approximately 11 min) were similar between groups. Conclusion: ProTaper Next and Reciproc® caused a slight risk of tenderness on biting and contributed to similar self-reported postoperative pain (low intensity) up to 7 days following root canal shaping.
ABSTRACT
This paper evaluates the effect of an additional hydrophobic resin coat (extra HL) associated with universal adhesives on sound and eroded dentin and evaluated immediately or after 2 years of water storage to improve the microtensile bond strength (µTBS) and nanoleakage (NL) when compared to the use of universal adhesives only. Sixty-four molars were assigned to eight groups using the following combinations: 1. dentin substrate, including sound and eroded dentin; 2. treatment, including the control and extra HL and storage time (immediately and after two-years of storage). Two universal adhesives (Prime & Bond Active or Scotchbond Universal) were evaluated. Before restoration, half of the teeth were subjected to soft-drink erosion. Composite buildups were bonded; specimens were stored (37 °C/24 h), sectioned into resin−dentin bonded sticks and tested for microtensile bond strength and nanoleakage using SEM (immediately and after two-years of storage). Three-way ANOVA and Tukey's test (α = 0.05%) were used. In the immediate testing, the application of extra HL did not increase microtensile bond strength values compared with the control group in either substrate (p > 0.05). However, extra HL significantly decreased nanoleakage values when applied to eroded and sound dentin (p = 0.0001). After two years, the application of extra HL produced significantly higher microtensile bond strength and lower nanoleakage values than the control group for both adhesives (p = 0.0001). In all cases, sound dentin showed higher microtensile bond strength and lower nanoleakage values than eroded dentin (p = 0.000001). An extra HL increased the bond strength and reduced nanoleakage in eroded dentin after two-years of storage.
ABSTRACT
OBJECTIVES: This study tested the ability of bioactive pastes containing niobophosphate and 45S5 glasses to reduce dentin permeability and to obliterate dentinal tubules, as a mean of reducing human dentin hypersensitivity. MATERIALS AND METHODS: Experimental pastes with concentrations of 10, 20, and 30 wt% of two bioactive glasses (45S5 or niobophosphate [NbG]) were formulated. A paste without bioactive glass (placebo) and a commercial paste (Nano P, FGM) were used as controls. Forty dentin disc specimens were obtained from caries-free extracted third human molars and divided in 8 groups (n = 5). Percentage of permeability (%Lp) was assessed in a dental permeability machine considering hydraulic conductance, immediately after pastes application and at day 7, day 14, and day 21. The precipitates formed on the surface of the dentin discs (and dentinal tubules) were analyzed by SEM/EDS and micro-Raman spectra. Data of dentin permeability (%) 2-way repeated-measures (ANOVA) and Holm-Sidak post-tests (α = 0.05). Dentinal tubule obliteration was visually (and elemental) evaluated and descriptively reported. RESULTS: The experimental bioactive glass pastes containing NbG and 45S5, regardless of the concentration, reduced dentin permeability in comparison with pastes without bioactive glasses (P < 0.05). The formulated placebo and commercial paste did not reduce permeability over time (P < 0.05). SEM/EDS and micro-Raman analyses showed that both type of bioactive pastes (NbG or 45S5-based) presented mineral precipitates obliterating the dentinal tubules at day 21. NbG seems to offer a better initial effect than 45S5, while at 21 days there is no difference between both glasses. CONCLUSION: Experimental bioactive pastes containing NbG and 45S5 (at concentrations of 10%, 20%, or 30%) have potential to reduce dentin permeability (over time) in comparison with pastes without bioactive glasses; and this occurs on behalf of obliteration of dentinal tubules by microparticle and precipitate formation. CLINICAL RELEVANCE: Bioactive pastes containing NbG and 45S5 may benefit patients presenting dentin hypersensitivity, because these pastes can start acting fast after application and maintain their action up to 21 days.
Subject(s)
Dentin Desensitizing Agents , Dentin Sensitivity , Dentin , Dentin Desensitizing Agents/pharmacology , Dentin Desensitizing Agents/therapeutic use , Dentin Permeability , Dentin Sensitivity/drug therapy , Humans , Microscopy, Electron, ScanningABSTRACT
Background: The clinical performance of new restorative materials must be evaluated before recommending its use in primary teeth. Aim: This randomized clinical trial evaluated the survival rates of restorations in single and occluso-proximal cavities of primary teeth performed with a new dual-cure resin-based material in comparison with a resin-modified glass ionomer cement after 12 months of follow-up. Materials and methods: A total of 107 restorations were placed in 27 children by one experienced pediatric dentist. Two materials were tested: Vitremer and a dual-cure resin-based material with (CentionN+Adh) and without (Cention N-Adh) adhesive system application. Two calibrated and blinded examiners evaluated the restorations at 3, 6, and 12-month. The longevity of the restorations was analyzed using Kaplan-Meier survival curves and Log-rank test (α = 5%). Results: The overall survival rates after 12-month were 81.9% for Vitremer, 70.4% for Cention N+Adh, and 66.7% for Cention N-Adh, which had the poorer performance (HR = 0.54; 95% CI= 0.31-0.95; p = 0.031). When considering the type of the cavities, the difference was significant only for occluso-proximal cavities when Cention N-Adh was used (HR = 0.46; CI = 0.26-0.81; p = 0.008). Conclusion: All evaluated materials are suitable for restoring occlusal cavities after selective caries removal. However, Cention N needs to be used with adhesive in occluso-proximal cavities. Clinical significance: Cention-N can be used for deciduous teeth restorations, with similar longevity rates as resin modified glass ionomer cements.Trial registration number RBR-9nqszr. How to cite this article: da Cunha CM, Wambier LM, Paris Matos TD, et al. New Dual-cure Resin-based Material in Occlusal and Occluso-proximal Restorations of Primary Teeth: Results of a Randomized Clinical Trial. Int J Clin Pediatr Dent 2022;15(1):38-46.
ABSTRACT
The aim of the study was to develop the Brazilian version of the Oral Health Impact Profile - Aesthetic Questionnaire (OHIP-Aes-Braz) and test its psychometric properties. The questionnaire test versions were developed by a panel of experts and a pre-test was conducted in a focus group. Data used for testing its psychometric properties were obtained from a randomized controlled clinical trial on tooth bleaching. Seventy-nine Brazilian adults were included. The questionnaires were applied before tooth bleaching treatment (baseline), one week (T1), and one month after the intervention (T2). Reliability was assessed in terms of internal consistency and stability, while validity was ascertained by criterion and construct validity. The sensitivity to change was assessed comparing the total scores at baseline and T2, using the Wilcoxon test (α = 0.05). Both stability and internal consistency (intra-class correlation coefficient=0.95, Cronbach's α = 0.92) proved to be adequate. Construct validity was confirmed as the correlation between OHIP-Aes-Braz scores with tooth color satisfaction and self-perceived oral health were in the expected direction. A positive correlation between OHIP-Aes-Braz and OHIP-14 (rs=0.63) and OIDP (rs=0.77) was observed. The instrument was responsive once differences in total scores before and after treatment were statistically significant (p<0.001). The OHIP-Aes-Braz presented good psychometric properties and showed sensitivity to change regarding aesthetics evaluation in Brazilian adults treated with tooth bleaching. A valid and reliable instrument allows a suitable assessment of oral health-related quality of life in Brazilian patients submitted to aesthetics dental interventions.
Subject(s)
Oral Health , Quality of Life , Adult , Esthetics, Dental , Humans , Reproducibility of Results , Surveys and QuestionnairesABSTRACT
OBJECTIVES: To evaluate the influence of the composite resin translucency used in direct anatomic fiber posts on the bond strength (BS) and microhardness (VHN) of a luting agent into flared roots. MATERIALS AND METHODS: The root canals of 70 single-rooted premolars were endodontically treated and prepared to simulate an oversized root canal. Prior to post cementation, composite resins with varying translucency (high translucent, HT; medium translucent, MT; high opacity, HO) were placed around the fiber posts to create anatomic fiber posts. The attenuation profile (%) of light passing either through the post or through the anatomic posts (n = 8) was obtained prior to the cementing procedures. A positive control group (PC) in which a prefabricated fiber post (PFP) with the diameter compatible with the root canal was cemented and a poorly adapted fiber post (negative control group, NC) were also evaluated. For both tests, the data were subjected to 2-way ANOVA and Bonferroni tests (α = 0.05). RESULTS: A more severe light attenuation through the post at the cervical (P < .001) and medium (P < 0.001) thirds was noted when less translucent composite resin surrounded the anatomic post. HO groups showed lower BS (P = .009) and VHN (P < .001) values than the other groups, regardless of root third. No significant difference in BS values was noted between PC and HT groups. CONCLUSION: The use of a more translucent composite resin in anatomic fiber posts increased the microhardness and bond strength of a dual polymerization self-adhesive RLA compared to the use of MT and HO composite. A well-adapted PFP showed the highest adhesive and mechanical behavior. CLINICAL RELEVANCE: Clinicians should choose more translucent composite resins to create direct anatomic fiber posts to be cemented in flared root canals. That choice may allow improved mechanical properties of self-adhesive RLA and higher bond strength to the root canal as a consequence.
Subject(s)
Dental Bonding , Post and Core Technique , Composite Resins/chemistry , Dental Bonding/methods , Dental Cements , Dental Pulp Cavity , Dentin , Glass/chemistry , Materials Testing , Resin Cements/chemistryABSTRACT
Abstract The aim of the study was to develop the Brazilian version of the Oral Health Impact Profile - Aesthetic Questionnaire (OHIP-Aes-Braz) and test its psychometric properties. The questionnaire test versions were developed by a panel of experts and a pre-test was conducted in a focus group. Data used for testing its psychometric properties were obtained from a randomized controlled clinical trial on tooth bleaching. Seventy-nine Brazilian adults were included. The questionnaires were applied before tooth bleaching treatment (baseline), one week (T1), and one month after the intervention (T2). Reliability was assessed in terms of internal consistency and stability, while validity was ascertained by criterion and construct validity. The sensitivity to change was assessed comparing the total scores at baseline and T2, using the Wilcoxon test (α = 0.05). Both stability and internal consistency (intra-class correlation coefficient=0.95, Cronbach's α = 0.92) proved to be adequate. Construct validity was confirmed as the correlation between OHIP-Aes-Braz scores with tooth color satisfaction and self-perceived oral health were in the expected direction. A positive correlation between OHIP-Aes-Braz and OHIP-14 (rs=0.63) and OIDP (rs=0.77) was observed. The instrument was responsive once differences in total scores before and after treatment were statistically significant (p<0.001). The OHIP-Aes-Braz presented good psychometric properties and showed sensitivity to change regarding aesthetics evaluation in Brazilian adults treated with tooth bleaching. A valid and reliable instrument allows a suitable assessment of oral health-related quality of life in Brazilian patients submitted to aesthetics dental interventions.
Resumo O objetivo do estudo foi desenvolver a versão brasileira do Oral Health Impact Profile - Aesthetic Questionnaire (OHIP-Aes-Braz) e testar suas propriedades psicométricas. As versões de teste do questionário foram desenvolvidas por um painel de especialistas e um pré-teste foi realizado em um grupo focal. Os dados usados para testar suas propriedades psicométricas foram obtidos a partir de um ensaio clínico randomizado controlado de clareamento dental. Setenta e nove brasileiros adultos foram incluídos. Os questionários foram aplicados antes do tratamento clareador (baseline), uma semana (T1) e um mês após a intervenção (T2). A confiabilidade foi avaliada em termos de consistência interna e estabilidade, enquanto a validade foi avaliada pela validade de critério e de construto. A sensibilidade à mudança foi avaliada pela comparação entre os escores totais no baseline e T2, usando o teste de Wilcoxon ((=0,05). Tanto a estabilidade quanto a consistência interna (coeficiente de correlação intraclasse=0,95, alfa de Cronbach=0,92) mostraram-se adequadas. A validade de construto foi confirmada uma vez que a correlação dos escores do OHIP-Aes-Braz com a satisfação com a cor dos dentes e a autopercepção da saúde bucal foram na direção esperada. Uma correlação positiva entre OHIP-Aes-Braz e OHIP-14 (r s =0,63) e OIDP (r s =0,77) foi observada. O instrumento foi responsivo uma vez que as diferenças nos escores totais antes e depois do tratamento foram estatisticamente significantes (p<0,001). O OHIP-Aes-Braz apresentou boas propriedades psicométricas e mostrou sensibilidade a mudanças na avaliação estética em adultos brasileiros submetidos ao clareamento dental. Um instrumento válido e confiável permite uma avaliação adequada da qualidade de vida relacionada à saúde bucal em pacientes brasileiros submetidos a intervenções odontológicas estéticas.
ABSTRACT
OBJECTIVES: To evaluate the effect of a glutaraldehyde-based desensitizer on the postoperative sensitivity (POS) in posterior resin composite restorations up to 12 months using a universal adhesive (Tetric N-Bond Universal) with selective enamel etching (SE) or an etch-and-rinse (ER) strategy. METHODS: Class I and class II resin composite restorations (n = 220) at least 3 mm deep were inserted in 55 subjects. The universal adhesive was applied using the SE (self-etch strategy on dentin with selective enamel etching) or the ER strategy, with or without prior application of a glutaraldehyde-based desensitizer (Gluma Desensitizer - GL) to form groups SEGL and ERGL. A bulk-fill resin composite (Tetric NCeram Bulk Fill) was used for all restorations. Spontaneous POS was assessed 7 days after the restorative procedure using the Visual Analog Scale (VAS) and the Numeric Rating Scale (NRS). After 7, 14, and 30 days of completing each restoration, the subjects were reassessed to evaluate POS caused by stimulation with an air blast, horizontal and vertical percussion. In addition, marginal discoloration, marginal adaptation, fracture, and recurrence of caries were evaluated using the FDI (World Dental Federation) criteria after 7 days and at 12 months. RESULTS: No significant spontaneous or stimuli-induced POS was observed when restorations with or without GL were compared (p>0.05). A higher risk of spontaneous POS was observed within 7 days (40.0%; 95% CI 28.1 to 53.1), without statistically significant differences among groups. None of the participants reported POS at 12 months, however five restorations were considered clinically unsatisfactory (p > 0.05). CONCLUSIONS: The previous application of GL did not significantly reduce spontaneous or stimuli-induced POS in posterior resin composite restorations at any time, regardless of the adhesive strategy used. CLINICAL SIGNIFICANCE: The use of a glutaraldehyde-based desensitizing agent did not generate lower incidence of postoperative sensitivity in resin composite posterior restorations.
Subject(s)
Dental Caries , Dental Restoration, Permanent , Composite Resins/chemistry , Composite Resins/therapeutic use , Dental Caries/prevention & control , Dental Marginal Adaptation , Dental Restoration, Permanent/methods , Dentin-Bonding Agents , Glutaral/pharmacology , Glutaral/therapeutic use , Humans , Resin Cements/therapeutic useABSTRACT
OBJECTIVES: This double-blind randomized clinical trial compared the effectiveness and bleaching sensitivity (BS) of at-home dental bleaching performed on the buccal surface and on the lingual surface. METHODS: Using a split-mouth design, 25 patients were assigned to two bleaching groups: 10% hydrogen peroxide (White Class 10%, FGM) applied once daily for 60 min to the buccal surface (BSB) and 10% hydrogen peroxide (White Class 10%, FGM) applied once daily for 60 min to the lingual surface (LSB), both for 14 days. The color was evaluated before bleaching, after the first and second weeks, and 1 month after the bleaching using Vita Classical and Vita Bleachedguide scales and a Vita Easyshade spectrophotometer. BS was recorded daily using a 0-4 numerical rating scale and a 0-10 visual analogue scale. The following statistical tests were used: color changes (Mann-Whitney), absolute risk of BS (McNemar's exact), and the intensity of BS (Mann-Whitney). In all statistical tests, the significance level was 5%. RESULTS: Significant bleaching was observed after the end of bleaching in both groups, with higher bleaching effectiveness for BSB when compared to LSB (p < 0.05). Regarding BS, no significant difference was observed between groups (p = 1.00). CONCLUSIONS: The 10% hydrogen peroxide (White Class 10%, FGM) applied in at-home bleaching performed on the lingual surface did not promote a similar result of color change compared to on the buccal surface. Regarding BS, there was no significant difference between the groups. CLINICAL RELEVANCE: The at-home bleaching performed on the lingual surface promotes a lower result in the color change. BS is similar between the groups. CLINICAL TRIAL REGISTRATION NUMBER: RBR-283byt.