Purpose: In situations where pathological acquisition is difficult, there is a lack of consensus on distinguishing between adenocarcinoma and squamous cell carcinoma from imaging images, and each doctor can only make judgments based on their own experience. This study aims to extract imaging features of chest CT, extract sensitive factors through logistic univariate and multivariate analysis, and model to distinguish between lung squamous cell carcinoma and lung adenocarcinoma. Methods: We downloaded chest CT scans with clear diagnosis of adenocarcinoma and squamous cell carcinoma from The Cancer Imaging Archive (TCIA), extracted 19 imaging features by a radiologist and a thoracic surgeon, including location, spicule, lobulation, cavity, vacuolar sign, necrosis, pleural traction sign, vascular bundle sign, air bronchogram sign, calcification, enhancement degree, distance from pulmonary hilum, atelectasis, pulmonary hilum and bronchial lymph nodes, mediastinal lymph nodes, interlobular septal thickening, pulmonary metastasis, adjacent structures invasion, pleural effusion. Firstly, we apply the glm function of R language to perform logistic univariate analysis on all variables to select variables with P < 0.1. Then, perform logistic multivariate analysis on the selected variables to obtain a predictive model. Next, use the roc function in R language to calculate the AUC value and draw the ROC curve, use the val.prob function in R language to draw the Calibrat curve, and use the rmda package in R language to draw the DCA curve and clinical impact curve. At the same time, 45 patients diagnosed with lung squamous cell carcinoma and lung adenocarcinoma through surgery or biopsy in the Radiotherapy Department and Thoracic Surgery Department of our hospital from 2023 to 2024 were included in the validation group. The chest CT features were jointly determined and recorded by the two doctors mentioned above and included in the validation group. The included image feature data are complete and does not require preprocessing, so directly entering statistical calculations. Perform ROC curves, calibration curves, DCA, and clinical impact curves in the validation group to further validate the predictive model. If the predictive model performs well in the validation group, further draw a nomogram to demonstrate. Results: This study extracted 19 imaging features from the chest CT scans of 75 patients downloaded from TCIA and finally selected 18 complete data for analysis. First, univariate analysis and multivariate analysis were performed, and a total of 5 variables were obtained: spicule, necrosis, air bronchogram Sign, atelectasis, pulmonary hilum and bronchial lymph nodes. After conducting modeling analysis with AUC = 0.887, a validation group was established using clinical cases from our hospital, Draw ROC curve with AUC = 0.865 in the validation group, evaluate the accuracy of the model through Calibrate calibration curve, evaluate the reliability of the model in clinical practice through DCA curve, and further evaluate the practicality of the model in clinical practice through clinical impact curve. Conclusion: It is possible to extract influential features from ordinary chest CT scans to determine lung adenocarcinoma and squamous cell carcinoma. The model we have set up performs well in terms of discrimination, accuracy, reliability, and practicality.
Modifying the interface between the lithium metal anode (LMA) and the electrolyte is crucial for achieving high-performance lithium metal batteries (LMBs). Recent research indicates that altering Li-metal interfaces with polymer coatings is an effective approach to extend LMBs' cycling lifespan. However, the physical properties of these polymer-Li interfaces have not yet been fully investigated. Therefore, the structural stability, electronic conductivity, and ionic conductivity of polymer-Li interfaces were examined based on first-principles calculations in this study. Several representative polymer compounds utilized in LMBs were assessed, including polyacrylonitrile (PAN), polyvinylidene fluoride (PVDF), polytetrafluoroethylene (PTFE), and polyethylene oxide (PEO). Our research revealed that lithium fluoride is formed upon fluoropolymer degradation, explaining previously observed experimental results. Polymers containing nitrile groups exhibit strong adhesion to lithium metal, facilitating the formation of the stable interface layer. Regarding electronic conductivity, the fluoropolymers preserve a good insulating property, which diminished marginally in the presence of lithium, but that of PAN and PEO significantly reduces. Additionally, lithium diffusion on PTFE and PEO demonstrates low diffusion barriers and high coefficients, enabling easy transportation. Overall, our investigation reveals that the interfaces formed between various polymers and LMA have distinct characteristics, providing new fundamental insights for designing composites with tailored interface properties.
In order to study how to use pulmonary functional imaging obtained through 4D-CT fusion for radiotherapy planning, and transform traditional dose volume parameters into functional dose volume parameters, a functional dose volume parameter model that may reduce level 2 and above radiation pneumonia was obtained. 41 pulmonary tumor patients who underwent 4D-CT in our department from 2020 to 2023 were included. MIM Software (MIM 7.0.7; MIM Software Inc., Cleveland, OH, USA) was used to register adjacent phase CT images in the 4D-CT series. The three-dimensional displacement vector of CT pixels was obtained when changing from one respiratory state to another respiratory state, and this three-dimensional vector was quantitatively analyzed. Thus, a color schematic diagram reflecting the degree of changes in lung CT pixels during the breathing process, namely the distribution of ventilation function strength, is obtained. Finally, this diagram is fused with the localization CT image. Select areas with Jacobi > 1.2 as high lung function areas and outline them as fLung. Import the patient's DVH image again, fuse the lung ventilation image with the localization CT image, and obtain the volume of fLung different doses (V60, V55, V50, V45, V40, V35, V30, V25, V20, V15, V10, V5). Analyze the functional dose volume parameters related to the risk of level 2 and above radiation pneumonia using R language and create a predictive model. By using stepwise regression and optimal subset method to screen for independent variables V35, V30, V25, V20, V15, and V10, the prediction formula was obtained as follows: Risk = 0.23656-0.13784 * V35 + 0.37445 * V30-0.38317 * V25 + 0.21341 * V20-0.10209 * V15 + 0.03815 * V10. These six independent variables were analyzed using a column chart, and a calibration curve was drawn using the calibrate function. It was found that the Bias corrected line and the Apparent line were very close to the Ideal line, The consistency between the predicted value and the actual value is very good. By using the ROC function to plot the ROC curve and calculating the area under the curve: 0.8475, 95% CI 0.7237-0.9713, it can also be determined that the accuracy of the model is very high. In addition, we also used Lasso method and random forest method to filter out independent variables with different results, but the calibration curve drawn by the calibration function confirmed poor prediction performance. The function dose volume parameters V35, V30, V25, V20, V15, and V10 obtained through 4D-CT are key factors affecting radiation pneumonia. Establishing a predictive model can provide more accurate lung restriction basis for clinical radiotherapy planning.
Four-Dimensional Computed Tomography , Lung Neoplasms , Radiation Pneumonitis , Humans , Radiation Pneumonitis/diagnostic imaging , Four-Dimensional Computed Tomography/methods , Female , Lung Neoplasms/radiotherapy , Lung Neoplasms/diagnostic imaging , Male , Middle Aged , Aged , Lung/diagnostic imaging , Lung/radiation effects , Radiotherapy Planning, Computer-Assisted/methods , Radiotherapy Dosage , Adult
While studies have explored the feasibility of switching between various thrombopoietin receptor agonists in treating immune thrombocytopenia (ITP), data on the switching from eltrombopag to hetrombopag remains scarce. This post-hoc analysis of a phase III hetrombopag trial aimed to assess the outcomes of ITP patients who switched from eltrombopag to hetrombopag. In the original phase III trial, patients initially randomized to the placebo group were switched to eltrombopag. Those who completed this 14-week eltrombopag were eligible to switch to a 24-week hetrombopag. Treatment response, defined as a platelet count of ≥ 50 × 109/L, and safety were evaluated before and after the switch. Sixty-three patients who completed the 14-week eltrombopag and switched to hetrombopag were included in this post-hoc analysis. Response rates before and after the switch were 66.7% and 88.9%, respectively. Among those with pre-switching platelet counts below 30 × 109/L, eight out of 12 patients (66.7%) responded, while eight out of nine patients (88.9%) with pre-switching platelet counts between 30 × 109/L and 50 × 109/L responded post-switching. Treatment-related adverse events were observed in 50.8% of patients during eltrombopag treatment and 38.1% during hetrombopag treatment. No severe adverse events were noted during hetrombopag treatment. Switching from eltrombopag to hetrombopag in ITP management appears to be effective and well-tolerated. Notably, hetrombopag yielded high response rates, even among patients who had previously shown limited response to eltrombopag. However, these observations need to be confirmed in future trials.
In this prospective, multicenter, Phase 2 clinical trial (NCT02987244), patients with peripheral T-cell lymphomas (PTCLs) who had responded to first-line chemotherapy with cyclophosphamide, doxorubicin or epirubicin, vincristine or vindesine, etoposide, and prednisone (Chi-CHOEP) were treated by autologous stem cell transplantation (ASCT) or with chidamide maintenance or observation. A total of 85 patients received one of the following interventions: ASCT (n = 15), chidamide maintenance (n = 44), and observation (n = 26). estimated 3 PFS and OS rates were 85.6%, 80.8%, and 49.4% (P = 0.001). The two-year OS rates were 85.6%, 80.8%, and 69.0% (P = 0.075).The ASCT and chidamide maintenance groups had significantly better progression-free survival (PFS) than the observation group (P = 0.001, and P = 0.01, respectively). The overall survival (OS) differed significantly between the chidamide maintenance group and the observation group ( P = 0.041). The multivariate and propensity score matching analyses for PFS revealed better outcomes in the subjects in the chidamide maintenance than observation groups (P = 0.02). The ASCT and chidamide maintenance groups had significant survival advantages over the observation group. In the post-remission stage of the untreated PTCL patients, single-agent chidamide maintenance demonstrated superior PFS and better OS than observation. Our findings highlight the potential benefit of chidamide in this patient subset, warranting further investigation through larger prospective trials. Clinical trial registration: clinicaltrial.gov, NCT02987244. Registered 8 December 2016, http://www.clinicaltrials.gov/ct2/show/NCT02987244 .
Lithium-sulfur (Li-S) batteries, operated through the interconversion between sulfur and solid-state lithium sulfide, are regarded as next-generation energy storage systems. However, the sluggish kinetics of lithium sulfide deposition/dissolution, caused by its insoluble and insulated nature, hampers the practical use of Li-S batteries. Herein, leaf-like carbon scaffold (LCS) with the modification of Mo2C clusters (Mo2C@LCS) is reported as host material of sulfur powder. During cycles, the dissociative Mo ions at the Mo2C@LCS/electrolyte interface are detected to exhibit competitive binding energy with Li ions for lithium sulfide anions, which disrupts the deposition behavior of crystalline lithium sulfide and trends a shift in the configuration of lithium sulfide toward an amorphous structure. Combining the related electrochemical study and first-principle calculation, it is revealed that the formation of amorphous lithium sulfides shows significantly improved kinetics for lithium sulfide deposition and decomposition. As a result, the obtained Mo2C@LCS/S cathode shows an ultralow capacity decay rate of 0.015% per cycle at a high mass loading of 9.5 mg cm-2 after 700 cycles. More strikingly, an ultrahigh sulfur loading of 61.2 mg cm-2 can also be achieved. This work defines an efficacious strategy to advance the commercialization of Mo2C@LCS host for Li-S batteries.
The sodium (Na) metal anode encounters issues such as volume expansion and dendrite growth during cycling. Herein, a novel three-dimensional flexible composite Na metal anode was constructed through the conversion-alloying reaction between Na and ultrafine Sb2S3 nanoparticles encapsulated within the electrospun carbon nanofibers (Sb2S3@CNFs). The formed sodiophilic Na3Sb sites and the high Na+-conducting Na2S matrix, coupled with CNFs, establish a spatially confined "sodiophilic-conductive" network, which effectively reduces the Na nucleation barrier, improves the Na+ diffusion kinetics, and suppresses the volume expansion, thereby inhibiting the Na dendrite growth. Consequently, the Na/Sb2S3@CNFs electrode exhibits a high Coulombic efficiency (99.94%), exceptional lifespan (up to 2800 h) at high current densities (up to 5 mA cm-2), and high areal capacities (up to 5 mAh cm-2) in symmetric cells. The coin-type full cells assembled with a Na3V2(PO4)3/C cathode demonstrate significant enhancement in electrochemical performance. The flexible pouch cell achieves an excellent energy density of 301 Wh kg-1.
Metallic Zn is considered as a promising anode material because of its abundance, eco-friendliness, and high theoretical capacity. However, the uncontrolled dendrite growth and side reactions restrict its further practical application. Herein, we proposed a ß-cyclodextrin-modified multiwalled carbon nanotube (CD-MWCNT) layer for Zn metal anodes. The obtained CD-MWCNT layer with high affinity to Zn can significantly reduce the transfer barrier of Zn2+ at the electrode/electrolyte interface, facilitating the uniform deposition of Zn2+ and suppressing water-caused side reactions. Consequently, the Zn||Zn symmetric cell assembled with CD-MWCNT shows a significantly enhanced cycling durability, maintaining a cycling life exceeding 1000 h even under a high current density of 5 mA cm-2. Furthermore, the full battery equipped with a V2O5 cathode displays an unparalleled long life. This work unveils a promising avenue toward the achievement of high-performance Zn metal anodes.
Anode-free sodium metal battery (AFSMB) promises high energy density but suffers from the difficulty of maintaining high cycling stability. Nonuniform sodium (Na) deposition on the current collector is largely responsible for capacity decay in the cycling process of AFSMB. Here, a unique copper phosphide (Cu3P) nanowire is constructed on copper (Cu3P@Cu) as a sodium deposition substrate by an in situ growth method. Superior electrochemical performance of Cu3P@Cu anode is delivered in asymmetric cells with an average Coulombic efficiency of 99.8% for over 800 cycles at 1 mA cm-2 with 1 mA h cm-2. The symmetric cell of Cu3P@Cu displayed a cycling lifespan of over 2000 h at 2 mA cm-2 with 1 mA h cm-2. Cryo-transmission electron microscope characterization and first principles calculation revealed that the low Na+ absorption energy and low Na+ diffusion energy barrier on Na3P promoted uniform Na nucleation and deposition, thus enhancing the Na surface stability. Moreover, anode-free Na3V2(PO4)3//Cu3P@Cu full pouch cell delivered a considerable cycling capacity of ≈15 mA h in 170 cycles, demonstrating its practical feasibility.
The aberrant expression of the long non-coding RNA (lncRNA) Small Nucleolar RNA Host Gene 29 (SNHG29) has been associated with various human cancers. However, the role of SNHG29 in chronic myeloid leukemia (CML) remains elusive. Therefore, this study aimed to investigate the function of SNHG29 in CML and unveil its potential underlying mechanisms. Herein, peripheral blood samples from 44 CML patients and 17 healthy subjects were collected. The expressions of SNHG29, microRNA-483-3p (miR-483-3p), and Casitas B-lineage Lymphoma (CBL) were measured using quantitative polymerase chain reaction (qPCR) or Western Blot. Cell viability, apoptosis, and cell cycle progression were evaluated using the Cell Counting Kit-8 assay, 5-ethynyl-2'-deoxyuridine incorporation, and flow cytometry, respectively. Western Blot analysis was employed to assess protein expressions related to cellular proliferation, apoptosis, and oncogenesis. RNA immunoprecipitation and dual-luciferase reporter assays were utilized to verify the interactions among SNHG29, miR-483-3p, and CBL. SNHG29 was significantly overexpressed in both blood samples of CML patients and CML cell lines. In CML, increased expression of SNHG29 was positively correlated with clinical staging, and patients with high SNHG29 expression had poorer survival outcomes. Functionally, knocking down SNHG29 effectively inhibited CML cell proliferation and promoted apoptosis. Mechanistically, SNHG29 acted as a competing endogenous RNA for miR-483-3p to modulate CBL expression, thereby activating the Phosphoinositide 3-Kinase/Akt signaling pathway and mediating CML progression. In summary, these findings reveal that SNHG29 promotes tumorigenesis in CML, offering a potential therapeutic strategy for CML treatment.
Leukemia, Myelogenous, Chronic, BCR-ABL Positive , Lymphoma , MicroRNAs , RNA, Long Noncoding , Humans , Carcinogenesis , Cell Transformation, Neoplastic , Leukemia, Myelogenous, Chronic, BCR-ABL Positive/genetics , MicroRNAs/genetics , Phosphatidylinositol 3-Kinases , Proto-Oncogene Proteins c-akt , RNA, Long Noncoding/genetics , RNA, Small Nucleolar/genetics
B-lymphocytic leukaemia is one of the most commonly diagnosed blood malignancies, and our knowledge of B-prolymphocytic leukaemia remained barely comprehensive. CircRNAs and miRNAs were identified of important regulatory roles in tumours. This study focused on the possibly existing interaction of circBCAR3 and miR-27a-3p, and downstream molecules thereafter in B-prolymphocytic leukaemia cells. CircBCAR3 and miR-27a-3p expression was evaluated in JVM-2 cell line and normal lymphocytes. Dual-luciferase luminescence assay was conducted for validation of circBCAR3 and miR-27a-3p interaction, as well as western blot and flow cytometry for evaluation and validation of their association with SLC7A11, reactive-oxygen species and Fe2+ regarding ferroptosis. CircBCAR3 were upregulated in JVM-2 cells and were reversely correlated with the expression of miR-27a-3p. CircBCAR3 targeted at miR-27a-3p and was consequently associated with SLC7A11 expression positively, inhibiting ferroptosis and peroxidative damage in JVM-2 cells. This study identified a circBCAR3-miR-27a-3p-SLC7A11 axis regulating ferroptosis and peroxidation of B-prolymphocytic leukaemia cells which might be a key mechanism facilitating the survival of tumour cells. However, further validation based on more diverse cell lines and animal models might be required.
Ferroptosis , Leukemia, Prolymphocytic , MicroRNAs , RNA, Circular , Animals , Humans , Amino Acid Transport System y+/genetics , Cell Line , Ferroptosis/genetics , Leukemia, Prolymphocytic/genetics , Leukemia, Prolymphocytic/metabolism , MicroRNAs/metabolism , RNA, Circular/genetics , RNA, Circular/metabolism
Separator engineering is a promising route to designing advanced lithium (Li) metal anodes for high-performance Li metal batteries (LMBs). Conventional separators are incapable of regulating the Li+ diffusion across the solid electrolyte interphase (SEI), leading to severe dendritic deposition. To address this issue, a polypropylene (PP) separator modified by spray coating the Cl-terminated titanium carbonitride MXene ink is designed (PP@Ti3CNCl2). The lithiophilic MXene provides excellent electrolyte wettability and low Li+ diffusion barriers, finally enhancing the Li+ diffusion kinetics of excessively stable SEI. The X-ray photoelectron spectroscopy depth profiling as well as cryo-transmission electron microscopy reveals that a gradient SEI hierarchy with evenly distributed LiF and LiCl is spontaneously formed during the electrochemical process. As a consequence, PP@Ti3CNCl2 delivers a high Coulombic efficiency (99.15%) coupled with a prolonged lifespan of over 5500 h in half cells and 3100 cycles at 2 C in full cells. This work offers an effective strategy for constructing dendrite-free and Li+ permeable interfaces toward high-energy-density LMBs.
Background: Immune thrombocytopenia (ITP) is an autoimmune disorder with decreased platelet counts and increased bleeding risk. Objectives: To evaluate the efficacy and safety of avatrombopag, a second-generation oral thrombopoietin receptor agonist, for the treatment of Chinese patients with chronic primary ITP. Methods: This multicenter, randomized, double-blind, placebo-controlled phase 3 study (CTR20210431) consisted of a 6-week double-blind core treatment phase followed by a 20-week, open-label extension phase. Chinese adults with chronic primary ITP for at least 12 months and a platelet count <30 × 109/L were randomized (2:1) to receive avatrombopag (initial dose of 20 mg/day) or matched placebo. The primary endpoint was the proportion of subjects with a platelet count ≥50 × 109/L at week 6 of the core treatment phase in absence of rescue therapy. Results: In total, 74 patients were randomized (avatrombopag: N = 48; placebo: N = 26) between March 5, 2021, and August 6, 2021; all of whom entered the extension phase (72 received avatrombopag up to 26 weeks). At week 6 of the core study, the platelet response (≥50 x 109/L) rate was significantly higher in the avatrombopag group (77.1%; 95% CI, 62.7, 88.0) vs placebo (7.7%; 95% CI, 1.0, 25.1); the treatment difference was 69.4% (95% CI, 56.2, 86.3; P < .0001). During the 6-week core study, treatment-emergent adverse events were reported in 41 (85.4%) and 20 (76.9%) patients in the avatrombopag and placebo groups, respectively. The most common avatrombopag-related treatment-emergent adverse events were upper respiratory tract infection (14/48 [29.2%]), increased platelet count (13/48 [27.1%]) and headache (7/48 [14.6%]). Conclusion: Avatrombopag was efficacious and generally well tolerated in Chinese patients with chronic primary ITP, with comparable efficacy and safety to previous reports in Western patients.
OBJECTIVE: To establish HL-60 cells and adriamycin resistant HL-60 cells (H-60/ADR) in which the expression of homologous box gene 1 (SIX1) was inhibited, and investigate the effect of inhibiting the expression of SIX1 on the drug resistance. METHODS: Lentivirus was used to transfect HL-60 and HL-60/ADR cells, and the cell lines stably inhibiting the expression of SIX1 were screened by puromycin. CCK-8 assay was used to detect the proliferation ability of cells in each group, apoptosis kit was used to detect the cell apoptosis, and real-time quantitative PCR was used to detect the expression level of drug-resistant related genes. RESULTS: HL-60 and HL-60/ADR stably transfected cell lines with down-regulation of SIX1 expression were successfully constructed. Compared with control group, the inhibition of SIX1 expression significantly inhibited the proliferation of HL-60 and HL-60/ADR cells (P <0.05), increased the apoptosis rate (P <0.05), and the sensitivity of cells to adriamycin increased after inhibition of SIX1 expression. CONCLUSION: Inhibition of SIX1 expression can improve cell sensitivity to adriamycin, and its role in reversing drug resistance may be related to the promotion of apoptosis gene expression.
Drug Resistance, Neoplasm , Leukemia, Myeloid, Acute , Humans , HL-60 Cells , Drug Resistance, Neoplasm/genetics , Doxorubicin/pharmacology , Apoptosis , Cell Proliferation , Homeodomain Proteins/genetics
OBJECTIVE: To investigate the effect of resveratrol (RSV) on the proliferation of multiple myeloma (MM) cells and its molecular mechanism. METHODS: MM cells (MM1.S, RPMI-8226 and U266) were treated with different concentrations of RSV for 24-72 h. The effect of RSV on the proliferation of MM cells was detected by CCK-8 (cell counting kit-8) assay. RPMI-8226 cells were divided into RSV, miR-21 mimic, RSV+miR-21 mimic, miR-21 inhibitor and RSV+miR-21 inhibitor groups, and transfected with corresponding plasmids. The cell cycle distribution of each group was detected by flow cytometry with propidium iodide (PI) single staining. The cell apoptosis of each group was detected by AnnexinV-FITC/PE-PI double staining. The expression of miR-21 in MM cells treated with RSV and the expression of KLF5 mRNA in each group were detected by qRT-PCR. The expression of KLF5 protein in each group was detected by Western blot. RESULTS: RSV inhibited the proliferation and induced apoptosis of MM cells in a time- and dose-dependent manner. After the MM cells were treated with RSV, the number of cells in sub-G1 phase was increased, and that in G2/M phase was decreased. Moreover, RSV significantly downregulated the expression of miR-21 in MM cells, and the inhibitory effect of miR-21 mimic on KLF5 expression in MM cells was counteracted by RSV. CONCLUSION: RSV may inhibit the proliferation and induce apoptosis of MM cells by inhibiting miR-21 and up-regulating KLF5 expression.
MicroRNAs , Multiple Myeloma , Humans , Resveratrol/pharmacology , Multiple Myeloma/metabolism , Cell Proliferation , Cell Line, Tumor , Apoptosis , MicroRNAs/genetics
Beyond lithium-ion technologies, lithium-sulfur batteries stand out because of their multielectron redox reactions and high theoretical specific energy (2500 Wh kg-1). However, the intrinsic irreversible transformation of soluble lithium polysulfides to solid short-chain sulfur species (Li2S2 and Li2S) and the associated large volume change of electrode materials significantly impair the long-term stability of the battery. Here we present a liquid sulfur electrode consisting of lithium thiophosphate complexes dissolved in organic solvents that enable the bonding and storage of discharge reaction products without precipitation. Insights garnered from coupled spectroscopic and density functional theory studies guide the complex molecular design, complexation mechanism, and associated electrochemical reaction mechanism. With the novel complexes as cathode materials, high specific capacity (1425 mAh g-1 at 0.2 C) and excellent cycling stability (80% retention after 400 cycles at 0.5 C) are achieved at room temperature. Moreover, the highly reversible all-liquid electrochemical conversion enables excellent low-temperature battery operability (>400 mAh g-1 at -40 °C and >200 mAh g-1 at -60 °C). This work opens new avenues to design and tailor the sulfur electrode for enhanced electrochemical performance across a wide operating temperature range.
Aqueous rechargeable zinc-based batteries (ZBBs) are emerging as desirable energy storage systems because of their high capacity, low cost, and inherent safety. However, the further application of ZBBs still faces many challenges, such as the issues of uncontrolled dendrite growth and severe parasitic reactions occurring at the Zn anode. Herein, an amino-grafted bacterial cellulose (NBC) film is prepared as artificial solid electrolyte interphase (SEI) for the Zn metal anodes, which can significantly reduce zinc nucleation overpotential and lead to the dendrite-free deposition of Zn metal along the (002) crystal plane more easily without any external stimulus. More importantly, the chelation between the modified amino groups and zinc ions can promote the formation of an ultra-even amorphous SEI upon cycling, reducing the activity of hydrate ions, and inhibiting the water-induced side reactions. As a result, the Zn||Zn symmetric cell with NBC film exhibits lower overpotential and higher cyclic stability. When coupled with the V2 O5 cathode, the practical pouch cell achieves superior electrochemical performance over 1000 cycles.
Building 3D electron-conducting scaffolds has been proven to be an effective way to alleviate severe dendritic growth and infinite volume change of sodium (Na) metal anodes. However, the electroplated Na metal cannot completely fill these scaffolds, especially at high current densities. Herein, we revealed that the uniform Na plating on 3D scaffolds is strongly related with the surface Na+ conductivity. As a proof of concept, we synthesized NiF2 hollow nanobowls grown on nickel foam (NiF2@NF) to realize homogeneous Na plating on the 3D scaffold. The NiF2 can be electrochemically converted to a NaF-enriched SEI layer, which significantly reduces the diffusion barrier for Na+ ions. The NaF-enriched SEI layer generated along the Ni backbones creates 3D interconnected ion-conducting pathways and allows for the rapid Na+ transfer throughout the entire 3D scaffold to enable densely filled and dendrite-free Na metal anodes. As a result, symmetric cells composed of identical Na/NiF2@NF electrodes show durable cycle life with an exceedingly stable voltage profile and small hysteresis, particularly at a high current density of 10 mA cm-2 or a large areal capacity of 10 mAh cm-2. Moreover, the full cell assembled with a Na3V2(PO4)3 cathode exhibits a superior capacity retention of 97.8% at a high current of 5C after 300 cycles.
