ABSTRACT
Cartilage repair has been a significant challenge in orthopedics that has not yet been fully resolved. Due to the absence of blood vessels and the almost cell-free nature of mature cartilage tissue, the limited ability to repair cartilage has resulted in significant socioeconomic pressures. Polysaccharide materials have recently been widely used for cartilage tissue repair due to their excellent cell loading, biocompatibility, and chemical modifiability. They also provide a suitable microenvironment for cartilage repair and regeneration. In this Review, we summarize the techniques used clinically for cartilage repair, focusing on polysaccharides, polysaccharides for cartilage repair, and the differences between these and other materials. In addition, we summarize the techniques of tissue engineering strategies for cartilage repair and provide an outlook on developing next-generation cartilage repair and regeneration materials from polysaccharides. This Review will provide theoretical guidance for developing polysaccharide-based cartilage repair and regeneration materials with clinical applications for cartilage tissue repair and regeneration.
Subject(s)
Cartilage, Articular , Tissue Engineering , Tissue Engineering/methods , Biocompatible Materials , Cartilage , Polysaccharides , Tissue ScaffoldsABSTRACT
Magnesium (Mg) metal secondary batteries have attracted much attention for their high safety and high energy density characteristics. However, the significant issues of the cathode/electrolyte interphase (CEI) in Mg batteries are still being ignored. In this work, a significant CEI layer on the typical Mo6 S8 cathode surface has been unprecedentedly constructed through the oxidation of the chloride-free magnesium tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip)4 ]2 ) salt under a proper charge cut-off voltage condition. The CEI has been identified to contain Bx Oy effective species originating from the oxidation of [B(hfip)4 ]- anion. It is confirmed that the Bx Oy species is beneficial to the desolvation of solvated Mg2+ , speeding up the interfacial Mg2+ transfer kinetics, thereby improving the Mg2+ -storage capability of Mo6 S8 host. The firstly reported CEI in Mg batteries will give deeper insights into the interface issues in multivalent electrochemical systems.
ABSTRACT
High-voltage sodium metal batteries are a highly intriguing battery technology in view of their resource sustainability, cost efficiency, and ultrahigh energy density. However, developing a high-performance electrolyte, compatible with both high-voltage cathodes and highly reactive sodium metal anodes, is extremely challenging. In this work, we delicately formulate a ternary phosphate electrolyte, composing of a cost-effective sodium bis(trifluoromethane sulfonyl) imide salt, a nonflammable triethyl phosphate (TEP) solvent, and a fluoroethylene carbonate (FEC) co-solvent. By rationally tailoring the TEP/FEC ratio, the ternary phosphate electrolyte displays a well-balanced performance, not only enabling highly efficient sodium deposition (an average Coulombic efficiency of 95.7% for Na//Cu cells) but also inheriting the intrinsic anodic stability (≥4.5 V vs Na+/Na) and nonflammability of phosphates. As a consequence, high-voltage Na3V2(PO4)2F3 cathode-based sodium metal cells (Na3V2(PO4)2F3//Na) deliver remarkable cyclic stability (97.9% capacity retention after 300 cycles), which is among the best for Na3V2(PO4)2F3-based batteries. This work may guide the electrolyte design principles and is highly enlightening in developing high energy density sodium-based batteries.
ABSTRACT
Friction stir welding (FSW) with a Zr interlayer was employed to join dissimilar alloys of 6061 Al and AZ31 Mg. The microstructures of Al/Mg and Al/Zr/Mg joints were investigated by optical microscopy (OM), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometer (EDS). The results showed that the central part of the Zr interlayer was smashed and intermixed with the base materials in the stir zone, whereas the undamaged part remained stable at the Al/Mg interface. The formation of Al-Mg intermetallic compounds (IMCs) was suppressed by the Zr interlayer due to its synergetic effects of chemical modification and thermal barrier. The electrochemical measurements revealed a differentiated corrosion behavior for each joint, where the corrosion rate of representative regions increased in the order of Al alloy < Mg alloy < heat-affected zone < stir zone. The immersion tests indicated an enhancement in corrosion resistance for the Al/Zr/Mg joint compared with the Al/Mg joint, which is owing to the mitigated galvanic corrosion between the base materials by the Zr interlayer.