Synthesis and grafting of diazonium tosylates for thermoplastic electrode immunosensors.

For electrochemical immunosensors, inexpensive electrodes with fast redox kinetics, and simple stable methods of electrode functionalization are vital. However, many inexpensive and easy to fabricate electrodes suffer from poor redox kinetics, and functionalization can often be difficult and/or unstable. Diazonium tosylates are particularly stable soluble salts that can be useful for electrode functionalization. Recently developed thermoplastic electrodes (TPEs) have been inexpensive, moldable, and highly electroactive carbon composite materials. Herein, the synthesis and grafting of diazonium tosylate salts were optimized for modification of TPEs and used to develop the first TPE immunosensors. With diazonium tosylates, TPEs were amine functionalized either directly through grafting of p-aminophenyl diazonium salt or indirectly through grafting p-nitrophenyl diazonium salt followed by electrochemical reduction to an amine. Diazonium tosylates were synthesized in situ as a paste in 6 min. Once the reaction paste was spread over the electrodes, near monolayer coverage (1.0 ± 0.2 nmol cm-2) was achieved for p-nitrophenyl diazonium salt within 5 min. Amine functionalized electrodes were conjugated to C-reactive protein (CRP) antibodies. Antibody-modified TPEs were applied for the sensitive detection of CRP, a biomarker of cardiovascular disease using electrochemical enzyme-linked immunosorbent assays (ELISA). LODs were determined to be 2 ng mL-1 in buffer, with high selectivity against interfering species for both functionalization methods. The direct p-aminophenyl modification method had the highest sensitivity to CRP and was further tested in spiked serum with an LOD of 10 ng mL-1. This low-cost and robust TPE immunosensor platform can be easily adapted for other analytes and multiplexed detection.

Sealing 3D-printed parts to poly(dimethylsiloxane) for simple fabrication of Microfluidic devices.

Microfluidics has revolutionized the fields of bioanalytical chemistry, cellular biology, and molecular biology. Advancements in microfluidic technologies, however, are often limited by labor, time, and resource-intensive fabrication methods, most commonly a form of photolithography. The advent of 3D printing has helped researchers fabricate proof-of-concept microfluidics more rapidly and at lower costs but suffers from poor resolution and tedious post-processing to remove uncured resin from enclosed channels. Additionally, custom resins and printers are often needed to create entirely enclosed channels, which increases cost and complexity of fabrication. In this work we demonstrate the ability to create microfluidic devices by covalently sealing 3D-printed parts with open-faced channels to polydimethylsiloxane (PDMS). Open-faced channels are easier to print than fully enclosed channels and can be printed using an inexpensive and commercially available stereolithography 3D printer and resin. The 3D-printed parts are sealed to PDMS, a common substrate used in traditional microfluidic fabrication, using two different techniques. The first involves coating the part with a commercially available silicone spray before sealing to PDMS via plasma treatment. In the second technique, the cured methacrylate resin is silanized with (3-Aminopropyl)triethoxysilane (APTES) before binding to PDMS with plasma treatment. Both methods create a strong seal between the two substrates, which is demonstrated with several types of microfluidic devices including droplet and gradient generators.

Electrochemical paper-based devices: sensing approaches and progress toward practical applications.

Paper-based sensors offer an affordable yet powerful platform for field and point-of-care (POC) testing due to their self-pumping ability and utility for many different analytical measurements. When combined with electrochemical detection using small and portable electronics, sensitivity and selectivity of the paper devices can be improved over naked eye detection without sacrificing portability. Herein, we review how the field of electrochemical paper-based analytical devices (ePADs) has grown since it was introduced a decade ago. We start by reviewing fabrication methods relevant to ePADs with more focus given to the electrode fabrication, which is fundamental for electrochemical sensing. Multiple sensing approaches applicable to ePADs are then discussed and evaluated to present applicability, advantages and challenges associated with each approach. Recent applications of ePADs in the fields of clinical diagnostics, environmental testing, and food analysis are also presented. Finally, we discuss how the current ePAD technologies have progressed to meet the analytical and practical specifications required for field and/or POC applications, as well as challenges and outlook.

Correction: Electrochemical paper-based devices: sensing approaches and progress toward practical applications.

Correction for 'Electrochemical paper-based devices: sensing approaches and progress toward practical applications' by Eka Noviana et al., Lab Chip, 2019, DOI: .