Electroactive Thermo-Pneumatic Soft Actuator with Self-Healing Features: A Critical Evaluation.

Soft actuators that operate with overpressure have been successfully implemented as soft robotic grippers. Naturally, as these pneumatic devices are prone to cuts, self-healing properties are attractive. Here, we prepared a gripper that operates based on the liquid-gas phase transition of ethanol within its hollow structure. The gripping surface of the device is coated with a self-healing polymer that heals with heat. This gripper also includes a stainless steel wire along the device that heats the entire structure through resistive heating. This design results in a soft robotic gripper that actuates and heals in parallel driven by the same practical stimulus, that is, electricity. Compared to other self-healing soft grippers, this approach has the advantage of being simple and having autonomous self-healing. However, there remain fundamental drawbacks that limit its implementation. The current work critically assesses this overpressure approach and concludes with a broad perspective regarding self-healing soft robotic grippers.

Combining Materials Obtained by 3D-Printing and Electrospinning from Commercial Polylactide Filament to Produce Biocompatible Composites.

The design of scaffolds to reach similar three-dimensional structures mimicking the natural and fibrous environment of some cells is a challenge for tissue engineering, and 3D-printing and electrospinning highlights from other techniques in the production of scaffolds. The former is a well-known additive manufacturing technique devoted to the production of custom-made structures with mechanical properties similar to tissues and bones found in the human body, but lacks the resolution to produce small and interconnected structures. The latter is a well-studied technique to produce materials possessing a fibrillar structure, having the advantage of producing materials with tuned composition compared with a 3D-print. Taking the advantage that commercial 3D-printers work with polylactide (PLA) based filaments, a biocompatible and biodegradable polymer, in this work we produce PLA-based composites by blending materials obtained by 3D-printing and electrospinning. Porous PLA fibers have been obtained by the electrospinning of recovered PLA from 3D-printer filaments, tuning the mechanical properties by blending PLA with small amounts of polyethylene glycol and hydroxyapatite. A composite has been obtained by blending two layers of 3D-printed pieces with a central mat of PLA fibers. The composite presented a reduced storage modulus as compared with a single 3D-print piece and possessing similar mechanical properties to bone tissues. Furthermore, the biocompatibility of the composites is assessed by a simulated body fluid assay and by culturing composites with 3T3 fibroblasts. We observed that all these composites induce the growing and attaching of fibroblast over the surface of a 3D-printed layer and in the fibrous layer, showing the potential of commercial 3D-printers and filaments to produce scaffolds to be used in bone tissue engineering.

Concentration Dependent Single Chain Properties of Poly(sodium 4-styrenesulfonate) Subjected to Aromatic Interactions with Chlorpheniramine Maleate Studied by Diafiltration and Synchrotron-SAXS.

The polyelectrolyte poly(sodium 4-styrenesulfonate) undergoes aromatic-aromatic interaction with the drug chlorpheniramine, which acts as an aromatic counterion. In this work, we show that an increase in the concentration in the dilute and semidilute regimes of a complex polyelectrolyte/drug 2:1 produces the increasing confinement of the drug in hydrophobic domains, with implications in single chain thermodynamic behavior. Diafiltration analysis at polymer concentrations between 0.5 and 2.5 mM show an increase in the fraction of the aromatic counterion irreversibly bound to the polyelectrolyte, as well as a decrease in the electrostatic reversible interaction forces with the remaining fraction of drug molecules as the total concentration of the system increases. Synchrotron-SAXS results performed in the semidilute regimes show a fractal chain conformation pattern with a fractal dimension of 1.7, similar to uncharged polymers. Interestingly, static and fractal correlation lengths increase with increasing complex concentration, due to the increase in the amount of the confined drug. Nanoprecipitates are found in the range of 30-40 mM, and macroprecipitates are found at a higher system concentration. A model of molecular complexation between the two species is proposed as the total concentration increases, which involves ion pair formation and aggregation, producing increasingly confined aromatic counterions in hydrophobic domains, as well as a decreasing number of charged polymer segments at the hydrophobic/hydrophilic interphase. All of these features are of pivotal importance to the general knowledge of polyelectrolytes, with implications both in fundamental knowledge and potential technological applications considering aromatic-aromatic binding between aromatic polyelectrolytes and aromatic counterions, such as in the production of pharmaceutical formulations.

The key role of the drug self-aggregation ability to obtain optimal nanocarriers based on aromatic-aromatic drug-polymer interactions.

The efficient association and controlled release of hydrophilic and aromatic low molecular-weight drugs (HALMD) still remains a challenge due to their relatively weak interactions with excipients and strong affinity to water. Considering that a wide variety of drugs to treat chronic diseases are HALMD, their inclusion in polymeric nanoparticles (NPs) constitutes an attractive possibility by providing to these drugs with controllable physiochemical properties, preventing crisis episodes, decreasing dose-dependent side effects and promoting therapeutic adhesiveness. However, the strong interaction of HALMD with the aqueous medium jeopardizes their encapsulation and controlled release. In this work, the role of the self-assembly tendency of HALMD on their association with the aromatic excipient poly(sodium 4-styrensulfonate) (PSS) to form NPs is studied. For this aim, the widely used drugs amitriptyline (AMT), promethazine (PMZ), and chlorpheniramine (CPM) are selected due to their well described critical aggregation concentration (cac) (36 mM for AMT, 36 mM for PMZ, and 69.5 mM for CPM). These drugs undergo aromatic-aromatic interactions with the polymer, which stabilize their mutual binding, as seen by NMR. The simple mixing of solutions of opposite charged molecules (drug + PSS) allowed obtaining NPs. Importantly, comparing the three drugs, the formation of NPs occurred at significantly lower absolute concentration and significantly lower drug/polymer ratio as the cac takes lower values, indicating a stronger binding to the polymer, as also deduced from the respective drug/polymer dissociation constant values. In addition, the number of formed NPs is similar for all formulations, even though a much lower concentration of the drug and polymer is present in systems comprising lower cac. The obtained NPs are spheroidal and present size between 100 and 160 nm, low polydispersity (≤0.3) and negative zeta potential (from -30 to -60 mV). The association efficiency reaches values ≥ 83% and drug loading could achieve values up to 68% (never evidenced before for systems comprising HALMD). In addition, drug release studies are also significantly influenced by cac, providing more prolonged release for AMT and PMZ (lower cac), whose delivery profiles adjust to the Korsmeyer-Peppas equation. As a novelty of this work, a synergic contribution of drug self-association tendency and aromatic-aromatic interaction between the drug and polymers is highlighted, a fact that could be crucial for the rational design and development of efficient drug delivery systems.

Maleimide Self-Reaction in Furan/Maleimide-Based Reversibly Crosslinked Polyketones: Processing Limitation or Potential Advantage?

Polymers crosslinked via furan/maleimide thermo-reversible chemistry have been extensively explored as reprocessable and self-healing thermosets and elastomers. For such applications, it is important that the thermo-reversible features are reproducible after many reprocessing and healing cycles. Therefore, side reactions are undesirable. However, we have noticed irreversible changes in the mechanical properties of such materials when exposing them to temperatures around 150 °C. In this work, we study whether these changes are due to the self-reaction of maleimide moieties that may take place at this rather low temperature. In order to do so, we prepared a furan-grafted polyketone crosslinked with the commonly used aromatic bismaleimide (1,1'-(methylenedi-4,1-phenylene)bismaleimide), and exposed it to isothermal treatments at 150 °C. The changes in the chemistry and thermo-mechanical properties were mainly studied by infrared spectroscopy, 1H-NMR, and rheology. Our results indicate that maleimide self-reaction does take place in the studied polymer system. This finding comes along with limitations over the reprocessing and self-healing procedures for furan/maleimide-based reversibly crosslinked polymers that present their softening (decrosslinking) point at relatively high temperatures. On the other hand, the side reaction can also be used to tune the properties of such polymer products via in situ thermal treatments.

Self-Healing Polymer Nanocomposite Materials by Joule Effect.

Nowadays, the self-healing approach in materials science mainly relies on functionalized polymers used as matrices in nanocomposites. Through different physicochemical pathways and stimuli, these materials can undergo self-repairing mechanisms that represent a great advantage to prolonging materials service-life, thus avoiding early disposal. Particularly, the use of the Joule effect as an external stimulus for self-healing in conductive nanocomposites is under-reported in the literature. However, it is of particular importance because it incorporates nanofillers with tunable features thus producing multifunctional materials. The aim of this review is the comprehensive analysis of conductive polymer nanocomposites presenting reversible dynamic bonds and their energetical activation to perform self-healing through the Joule effect.

pH-Responsive Polyketone/5,10,15,20-Tetrakis-(Sulfonatophenyl)Porphyrin Supramolecular Submicron Colloidal Structures.

In this work, we prepared color-changing colloids by using the electrostatic self-assembly approach. The supramolecular structures are composed of a pH-responsive polymeric surfactant and the water-soluble porphyrin 5,10,15,20-tetrakis-(sulfonatophenyl)porphyrin (TPPS). The pH-responsive surfactant polymer was achieved by the chemical modification of an alternating aliphatic polyketone (PK) via the Paal-Knorr reaction with N-(2-hydroxyethyl)ethylenediamine (HEDA). The resulting polymer/dye supramolecular systems form colloids at the submicron level displaying negative zeta potential at neutral and basic pH, and, at acidic pH, flocculation is observed. Remarkably, the colloids showed a gradual color change from green to pinky-red due to the protonation/deprotonation process of TPPS from pH 2 to pH 12, revealing different aggregation behavior.

Application of Chitosan and Chondroitin Sulphate Aerogels in a Patient With Diabetes With an Open Forefoot Transmetatarsal Amputation.

INTRODUCTION: Diabetic foot ulcers may lead to nontraumatic amputations of the foot, leading to a decrease in patient quality of life. Transmetatarsal amputations (TMAs) represent an effective surgical procedure in cases of severe foot infection, but the tissue reconstruction is complicated and additional procedures should be considered. The present case report evaluates the wound closure of an open TMA in a patient with diabetes treated with a new aerogel composed of chitosan (ChS) and chondroitin sulphate (CS), without needing a skin graft. CASE REPORT: A 72-year-old man with diabetes and a history of successive amputations was admitted to a hospital in Valdivia, Chile, due to a severe infection of toes 2 and 4 of the right foot. After the diagnosis of gangrene and osteomyelitis, the patient underwent a TMA of his right forefoot. The surgeon proposed the incorporation of ChS and CS aerogels to accelerate wound healing to avoid another surgical procedure. The TMA surgical wound area closed 50% after day 28 from starting treatment with aerogels. Complete closure was achieved at day 94 of treatment with aerogels, with good epithelial tissue and favorable cosmetic results and without residual limb deformities. The patient experienced minimal physical and psychological impairment from the procedure. Other surgical procedures were not necessary. CONCLUSIONS: Due to the results of this patient, use of ChS and CS aerogels could represent an alternative treatment for forefoot TMA wound closure and prevent further surgical procedures, such as skin grafting. Future works should consider a larger number of cases.

Electrically Self-Healing Thermoset MWCNTs Composites Based on Diels-Alder and Hydrogen Bonds.

In this work, we prepared electrically conductive self-healing nanocomposites. The material consists of multi-walled carbon nanotubes (MWCNT) that are dispersed into thermally reversible crosslinked polyketones. The reversible nature is based on both covalent (Diels-Alder) and non-covalent (hydrogen bonding) interactions. The design allowed for us to tune the thermomechanical properties of the system by changing the fractions of filler, and diene-dienophile and hydroxyl groups. The nanocomposites show up to 1 × 104 S/m electrical conductivity, reaching temperatures between 120 and 150 °C under 20-50 V. The self-healing effect, induced by electricity was qualitatively demonstrated as microcracks were repaired. As pointed out by electron microscopy, samples that were already healed by electricity showed a better dispersion of MWCNT within the polymer. These features point toward prolonging the service life of polymer nanocomposites, improving the product performance, making it effectively stronger and more reliable.

Fibrous Materials Made of Poly(ε-caprolactone)/Poly(ethylene oxide)-b-Poly(ε-caprolactone) Blends Support Neural Stem Cells Differentiation.

In this work, we design and produce micron-sized fiber mats by blending poly(ε-caprolactone) (PCL) with small amounts of block copolymers poly(ethylene oxide)m-block-poly(ε-caprolactone)n (PEOm-b-PCLn) using electrospinning. Three different PEOm-b-PCLn block copolymers, with different molecular weights of PEO and PCL, were synthesized by ring opening polymerization of ε-caprolactone using PEO as initiator and stannous octoate as catalyst. The polymer blends were prepared by homogenous solvent mixing using dichloromethane for further electrospinning procedures. After electrospinning, it was found that the addition to PCL of the different block copolymers produced micron-fibers with smaller width, equal or higher hydrophilicity, lower Young modulus, and rougher surfaces, as compared with micron-fibers obtained only with PCL. Neural stem progenitor cells (NSPC), isolated from rat brains and grown as neurospheres, were cultured on the fibrous materials. Immunofluorescence assays showed that the NSPC are able to survive and even differentiate into astrocytes and neurons on the synthetic fibrous materials without any growth factor and using the fibers as guidance. Disassembling of the cells from the NSPC and acquisition of cell specific molecular markers and morphology progressed faster in the presence of the block copolymers, which suggests the role of the hydrophilic character and porous topology of the fiber mats.

Ionic Nanocomplexes of Hyaluronic Acid and Polyarginine to Form Solid Materials: A Green Methodology to Obtain Sponges with Biomedical Potential.

We report on the design, development, characterization, and a preliminary cellular evaluation of a novel solid material. This material is composed of low-molecular-weight hyaluronic acid (LMWHA) and polyarginine (PArg), which generate aqueous ionic nanocomplexes (INC) that are then freeze-dried to create the final product. Different ratios of LMWHA/PArg were selected to elaborate INC, the size and zeta potential of which ranged from 100 to 200 nm and +25 to -43 mV, respectively. Turbidimetry and nanoparticle concentration analyses demonstrated the high capacity of the INC to interact with increasing concentrations of LMWHA, improving the yield of production of the nanostructures. Interestingly, once the selected formulations of INC were freeze-dried, only those comprising a larger excess of LMWHA could form reproducible sponge formulations, as seen with the naked eye. This optical behavior was consistent with the scanning transmission electron microscopy (STEM) images, which showed a tendency of the particles to agglomerate when an excess of LMWHA was present. Mechanical characterization evidenced low stiffness in the materials, attributed to the low density and high porosity. A preliminary cellular evaluation in a fibroblast cell line (RMF-EG) evidenced the concentration range where swollen formulations did not affect cell proliferation (93-464 µM) at 24, 48, or 72 h. Considering that the reproducible sponge formulations were elaborated following inexpensive and non-contaminant methods and comprised bioactive components, we postulate them with potential for biomedical purposes. Additionally, this systematic study provides important information to design reproducible porous solid materials using ionic nanocomplexes.

A New Methodology to Create Polymeric Nanocarriers Containing Hydrophilic Low Molecular-Weight Drugs: A Green Strategy Providing a Very High Drug Loading.

To date, a large number of active molecules are hydrophilic and aromatic low molecular-weight drugs (HALMD). Unfortunately, the low capacity of these molecules to interact with excipients and the fast release when a formulation containing them is exposed to biological media jeopardize the elaboration of drug delivery systems by using noncovalent interactions. In this work, a new, green, and highly efficient methodology to noncovalently attach HALMD to hydrophilic aromatic polymers to create nanocarriers is presented. The proposed method is simple and consists in mixing an aqueous solution containing HALMD (model drugs: imipramine, amitriptyline, or cyclobenzaprine) with another aqueous solution containing the aromatic polymer [model polymer: poly(sodium 4-styrenesulfonate) (PSS)]. NMR experiments demonstrate strong chemical shifting of HALMD aromatic rings when interacting with PSS, evidencing aromatic-aromatic interactions. Ion pair formation and aggregation produce the collapse of the system in the form of nanoparticles. The obtained nanocarriers are spheroidal, their size ranging between 120 and 170 nm, and possess low polydispersity (≤0.2) and negative zeta potential (from -60 to -80 mV); conversely, the absence of the aromatic group in the polymer does not allow the formation of nanostructures. Importantly, in addition to high drug association efficiencies (≥90%), the formed nanocarriers show drug loading values never evidenced for other systems comprising HALMD, reaching ≈50%. Diafiltration and stopped flow experiments evidenced kinetic drug entrapment governed by molecular rearrangements. Importantly, the nanocarriers are stable in suspension for at least 18 days and are also stable when exposed to different high ionic strength, pH, and temperature values. Finally, they are transformable to a reconstitutable dry powder without losing their original characteristics. Considering the large quantity of HALMD with importance in therapeutics and the simplicity of the presented strategy, we envisage these results as the basis to elaborate a number of drug delivery systems with applications in different pathologies.

A mechanistic approach for the optimization of loperamide loaded nanocarriers characterization: Diafiltration and mathematical modeling advantages.

Oral bioavailability of loperamide is restricted by its limited absorption in the gastrointestinal tract due to its poor aqueous solubility and its P-glycoprotein (Pgp) substrate characteristic. In addition, ammonium methacrylate copolymers have shown to have mucoadhesive properties, whereas poloxamer 188, has been suggested as a Pgp inhibitor. Thus, in this work, we evaluate conditions that affect physicochemical parameters of ammonium methacrylate/poloxamer 188-based nanocarriers loaded with loperamide hydrochloride. Nanocarriers were synthesized by nanoprecipitation, enhancing loperamide encapsulation efficiency by modifying the aqueous phase to basic pH. The isolation of the non-encapsulated drug fraction from the nanocarriers-incorporated fraction was conducted by centrifugation, ultrafiltration, vacuum filtration and diafiltration. The last method was effective in providing a deeper understanding of drug-nanocarrier loading and interactions by means of modeling the data obtained by it. Through diafiltration, it was determined an encapsulation efficiency of about 93%, from which a 38% ±6 was shown to be reversibly (thermodynamic interaction) and a 62% ±6 irreversibly (kinetic interaction) bound. Finally, release profiles were assessed through empirical and semi-empirical modeling, showing a biphasic release behavior (burst effect 11.34% and total release at 6 h = 33% ±1). Thus, encapsulation efficiency and release profile were shown to have a strong mathematical modeling-based correlation, providing the mechanistic approach presented in this article a solid support for future translational investigations.

Aerogels made of chitosan and chondroitin sulfate at high degree of neutralization: Biological properties toward wound healing.

In this study, highly neutralized, highly porous, and ultralight polymeric aerogels prepared from aqueous colloidal suspensions of chitosan (CS) and chondroitin sulfate (ChS) nanocomplexes, formulated as quasi-equimolar amounts of both, are described. These aerogels were designed as healing agents under the inspiration of minimizing the amount of matter applied to wounds, reducing the electrostatic potential of the material and avoiding covalent cross-linkers in order to decrease metabolic stress over wounds. Aerogels synthesized under these criteria are biocompatible and provide specific properties for the induction of wound healing. They do not affect neither the metabolic activity of cultured 3T3 fibroblasts nor the biochemical parameters of experimental animals, open wounds close significantly faster and, unlike control wounds, complete reepithelialization and scarring can be attained 14 days after surgery. Because of its hydration abilities, rapid adaptation to the wound bed and the early accelerator effect of wound closure, the CS/ChS aerogels appear to be functional inducers of the healing. Previous information show that CS/ChS aerogels improve wound bed quality, increase granulation tissue and have pain suppressive effect. CS/ChS aerogels are useful as safe, inexpensive and easy to handle materials for topical applications, such as skin chronic wounds. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2464-2471, 2018.

Totally Organic Redox-Active pH-Sensitive Nanoparticles Stabilized by Amphiphilic Aromatic Polyketones.

Amphiphilic aromatic polymers have been synthesized by grafting aliphatic polyketones with 4-(aminomethyl)benzoic acid at different molar ratios via the Paal-Knorr reaction. The resulting polymers, showing diketone conversion degree of 16%, 37%, 53%, and 69%, have been complexed with the redox-active 2,3,5-triphenyl-2H-tetrazolium chloride, a precursor molecule with which aromatic-aromatic interactions are held. Upon addition of ascorbic acid to the complexes, in situ reduction of the tetrazolium salt produced 1,3,5-triphenylformazan nanoparticles stabilized by the amphiphilic polymers. The stabilized nanoparticles display highly negative zeta potential [-(35-70) mV] and hydrodynamic diameters in the submicron range (100-400 nm). Nonaromatic polyelectrolytes or hydrophilic aromatic copolymers showing low linear aromatic density and high linear charge density such as acrylate/maleate and sulfonate/maleate-containing polymers were unable to stabilize formazan nanoparticles synthesized by the same method. The copolymers studied here bear uncharged nonaromatic comonomers (unreacted diketone units) as well as charged aromatic comonomers, which furnish amphiphilia. Thus, the linear aromatic density and the maximum linear charge density have the same value for each copolymer, and the hydrophilic/hydrophobic balance varies with the diketone conversion degree. The amphiphilia of the copolymers allows the stabilization of the nanoparticles, even with the copolymers showing a low linear aromatic density. The method of nanoparticle synthesis constitutes a simple, cheap, and green method for the production of switchable totally organic, redox-active, pH-sensitive nanoparticles that can be reversibly turned into macroprecipitates upon pH changing.

Electrically-Responsive Reversible Polyketone/MWCNT Network through Diels-Alder Chemistry.

This study examines the preparation of electrically conductive polymer networks based on furan-functionalised polyketone (PK-Fu) doped with multi-walled carbon nanotubes (MWCNTs) and reversibly crosslinked with bis-maleimide (B-Ma) via Diels-Alder (DA) cycloaddition. Notably, the incorporation of 5 wt.% of MWCNTs results in an increased modulus of the material, and makes it thermally and electrically conductive. Analysis by X-ray photoelectron spectroscopy indicates that MWCNTs, due to their diene/dienophile character, covalently interact with the matrix via DA reaction, leading to effective interfacial adhesion between the components. Raman spectroscopy points to a more effective graphitic ordering of MWCNTs after reaction with PK-Fu and B-Ma. After crosslinking the obtained composite via the DA reaction, the softening point (tan(δ) in dynamic mechanical analysis measurements) increases up to 155 °C, as compared to the value of 130 °C for the PK-Fu crosslinked with B-Ma and that of 140 °C for the PK-Fu/B-Ma/MWCNT nanocomposite before resistive heating (responsible for crosslinking). After grinding the composite, compression moulding (150 °C/40 bar) activates the retro-DA process that disrupts the network, allowing it to be reshaped as a thermoplastic. A subsequent process of annealing via resistive heating demonstrates the possibility of reconnecting the decoupled DA linkages, thus providing the PK networks with the same thermal, mechanical, and electrical properties as the crosslinked pristine systems.

Aggregation Number in Water/n-Hexanol Molecular Clusters Formed in Cyclohexane at Different Water/n-Hexanol/Cyclohexane Compositions Calculated by Titration 1H NMR.

Upon titration of n-hexanol/cyclohexane mixtures of different molar compositions with water, water/n-hexanol clusters are formed in cyclohexane. Here, we develop a new method to estimate the water and n-hexanol aggregation numbers in the clusters that combines integration analysis in one-dimensional 1H NMR spectra, diffusion coefficients calculated by diffusion-ordered NMR spectroscopy, and further application of the Stokes-Einstein equation to calculate the hydrodynamic volume of the clusters. Aggregation numbers of 5-15 molecules of n-hexanol per cluster in the absence of water were observed in the whole range of n-hexanol/cyclohexane molar fractions studied. After saturation with water, aggregation numbers of 6-13 n-hexanol and 0.5-5 water molecules per cluster were found. O-H and O-O atom distances related to hydrogen bonds between donor/acceptor molecules were theoretically calculated using density functional theory. The results show that at low n-hexanol molar fractions, where a robust hydrogen-bond network is held between n-hexanol molecules, addition of water makes the intermolecular O-O atom distance shorter, reinforcing molecular association in the clusters, whereas at high n-hexanol molar fractions, where dipole-dipole interactions dominate, addition of water makes the intermolecular O-O atom distance longer, weakening the cluster structure. This correlates with experimental NMR results, which show an increase in the size and aggregation number in the clusters upon addition of water at low n-hexanol molar fractions, and a decrease of these magnitudes at high n-hexanol molar fractions. In addition, water produces an increase in the proton exchange rate between donor/acceptor molecules at all n-hexanol molar fractions.

Dispersion of the Photosensitizer 5,10,15,20-Tetrakis(4-Sulfonatophenyl)-porphyrin by the Amphiphilic Polymer Poly(vinylpirrolidone) in Highly Porous Solid Materials Designed for Photodynamic Therapy.

The ability of the amphiphilic and biocompatible poly(vinylpyrrolidone) to avoid self-aggregation of the photosensitizer 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin in aqueous solution in the presence of the biocompatible polycation chitosan, polymer that induces the dye self-aggregation, is shown. This is related to the tendency of the dye to undergo preferential solvation by the amphiphilic polymer. Importantly, the dispersant ability of this polymer is transferred to the solid state. Thus, aerogels made of the biocompatible polymers chitosan and chondroitin sulfate, and containing the photosensitizer dispersed by the amphiphilic polymer have been synthesized. Production of reactive oxygen species by the aerogel containing the amphiphilic polymer was faster than when the polymer was absent, correlating with the relative concentration of dyes dispersed as monomers. The aerogels presented here constitute low cost biocompatible materials bearing a conventional photosensitizer for photodynamic therapy, easy to produce, store, transport, and manage in clinical practice.

Water-Induced Phase Transition in Cyclohexane/n-Hexanol/Triton X-100 Mixtures at a Molar Composition of 1/16/74 Studied by NMR.

Molecular aggregation in a mixture of Triton X-100/n-hexanol/cyclohexane at a molar ratio of 1/16/74 is studied upon addition of small amounts of water. The composition of organic components has been chosen at a ratio n-hexanol/cyclohexane where a well-formed hydrogen bond network has been described. The ratio Triton X-100/n-hexanol has been chosen to afford a stoichiometry of ethylene oxide (EO) residues/n-hexanol of 1/2. At these conditions the addition of water consecutively produces the appearance of three defined phases: a clear solution, a lamellar phase, and a microemulsion. The two corresponding transitions occur at water/EO/n-hexanol molar ratios of 2/1/2 (clear to lamella), and 3/1/2 (lamella to microemulsion), while phase separation occurs at a molar ratio of 4/1/2, highlighting the important role of stoichiometry. Molecular dynamics measured by 1H NMR techniques, such as DOSY, and calculations of T1 and T2 relaxation times allow distinguishing the transition between the different phases and justifying their structure. Molecular assembly in the three phases is organized around hydrogen bond networks in which the hydroxyl groups of both TX-100 and n-hexanol, ethylene oxide groups of TX-100, and water participate. 1D 1H NMR spectral changes correlate with the different characteristics of the different phases. As the main characteristics of the lamellar phase we find a very restricted mobility of the molecules involved, and water chemical shifts in 1D 1H NMR spectra of around 5.0 ppm, higher than that of bulk water appearing at 4.7 ppm.

Facile Formation of Redox-Active Totally Organic Nanoparticles in Water by In Situ Reduction of Organic Precursors Stabilized through Aromatic-Aromatic Interactions by Aromatic Polyelectrolytes.

The formation of redox-active, totally organic nanoparticles in water is achieved following a strategy similar to that used to form metal nanoparticles. It is based on two fundamental concepts: i) complexation through aromatic-aromatic interactions of a water-soluble precursor aromatic molecule with polyelectrolytes bearing complementary charged aromatic rings, and ii) reduction of the precursor molecule to achieve stabilized nanoparticles. Thus, formazan nanoparticles are synthesized by reduction of a tetrazolium salt with ascorbic acid using polyelectrolytes bearing benzene sulfonate residues of high linear aromatic density, but cannot be formed in the presence of nonaromatic polyelectrolytes. The red colored nanoparticles are efficiently encapsulated in calcium alginate beads, showing macroscopic homogeneity. Bleaching kinetics with chlorine show linear rates on the order of tenths of milli-meters per minute. A linear behavior of the dependence of the rate of bleaching on the chlorine concentration is found, showing the potential of the nanoparticles for chlorine sensing.