ABSTRACT
The cross section of the ^{13}C(α,n)^{16}O reaction is needed for nuclear astrophysics and applications to a precision of 10% or better, yet inconsistencies among 50 years of experimental studies currently lead to an uncertainty of ≈15%. Using a state-of-the-art neutron detection array, we have performed a high resolution differential cross section study covering a broad energy range. These measurements result in a dramatic improvement in the extrapolation of the cross section to stellar energies potentially reducing the uncertainty to ≈5% and resolving long standing discrepancies in higher energy data.
ABSTRACT
Carbon and oxygen burning reactions, in particular, ^{12}C+^{12}C fusion, are important for the understanding and interpretation of the late phases of stellar evolution as well as the ignition and nucleosynthesis in cataclysmic binary systems such as type Ia supernovae and x-ray superbursts. A new measurement of this reaction has been performed at the University of Notre Dame using particle-γ coincidence techniques with SAND (a silicon detector array) at the high-intensity 5U Pelletron accelerator. New results for ^{12}C+^{12}C fusion at low energies relevant to nuclear astrophysics are reported. They show strong disagreement with a recent measurement using the indirect Trojan Horse method. The impact on the carbon burning process under astrophysical scenarios will be discussed.
ABSTRACT
Insufficient data are available to fully understand the effects of metal additive manufacturing (AM) defects for widespread adoption of the emerging technology. Characterization of failure processes of complex internal geometries and defects in metal AM can significantly enhance this understanding. We aim to demonstrate a complete experimental measurement process and failure analysis method to study the effects of AM defects. We utilized simultaneous implementation of tensile tests with high-resolution X-ray computed tomography (XCT) measurements on 17-4 stainless steel dog-bone samples with an intentional octahedron-shaped internal cavity included in the gauge length and also containing much smaller lack-of-fusion (LOF) defects, all generated by a Laser Powder Bed Fusion (LPBF) additive manufacturing process. The LOF defects were introduced by intentionally changing the LPBF default processing parameters. XCT image-based linear elastic finite element (FE) simulations were used to interpret the data. The in-situ tensile tests combined with simultaneous XCT measurements revealed the details of the failure process initiated by additively manufactured rough internal surfaces and porous defect structures, which experienced high stress concentrations. Progressive collapse of ligaments leading to larger pores was clearly observed, and the resulting porosity evolution until failure was quantitatively analyzed. The high stress concentrations were also directly confirmed by the FE simulations. The experimental methods described in this paper enable the quantitative study of the complex failure mechanisms of additively manufactured metal parts, and the image-based FE simulation method is effective for identifying and/or confirming possible failure locations and features.
ABSTRACT
Laser powder bed fusion systems use a high-power laser, steered by two galvanometer (galvo) mirrors to scan a pattern on metal powder layers. Part geometric tolerances depend on the positioning accuracy of the laser/galvo system. This paper describes an in-situ calibration technique utilizing a camera coaxially aligned with the laser imaging a dimensional reference artefact. The laser positions are determined from the images captured by the camera while scanning the artefact. The measurement uncertainty is estimated using simulations. The in-situ calibration results are compared with the results obtained from the typical 'mark and measure' galvo calibration method.
ABSTRACT
Pore structures of additively manufactured metal parts were investigated with X-ray Computed Tomography (XCT). Disks made of a cobalt-chrome alloy were produced using laser-based powder bed fusion (PBF) processes. The additive manufacturing processing parameters (scan speed and hatch spacing) were varied in order to have porosities varying from 0.1% to 70% so as to see the effects of processing parameters on the formation of pores and cracks. The XCT images directly show three-dimensional (3D) pore structure, along with cracks. Qualitative visualization is useful; however, quantitative results depend on accurately segmenting the XCT images. Methods of segmentation and image analysis were carefully developed based, as much as possible, on aspects of the images themselves. These enabled quantitative measures of porosity, including how porosity varies in and across the build direction, pore size distribution, how pore structure varies between parts with similar porosity levels but different processing parameters, pore shape, and particle size distribution of un-melted powder trapped in pores. These methods could possibly serve as the basis for standard segmentation and image analysis methods for metallic additively manufactured parts, enabling accurate and reliable defect detection and quantitative measures of pore structure, which are critical aspects of qualification and certification.
ABSTRACT
Near real-time visualization of complex two-phase flow in a porous medium was demonstrated with dynamic 4-dimensional (4D) (3D + time) imaging at the 2-BM beam line of the Advanced Photon Source (APS) at Argonne National Laboratory. Advancing fluid fronts through tortuous flow paths and their interactions with sand grains were clearly captured, and formations of air bubbles and capillary bridges were visualized. The intense X-ray photon flux of the synchrotron facility made 4D imaging possible, capturing the dynamic evolution of both solid and fluid phases. Computed Tomography (CT) scans were collected every 12 s with a pixel size of 3.25 µm. The experiment was carried out to improve understanding of the physics associated with two-phase flow. The results provide a source of validation data for numerical simulation codes such as Lattice-Boltzmann, which are used to model multi-phase flow through porous media.
ABSTRACT
Preventive neuroradiology is a new concept supported by growing literature. The main rationale of preventive neuroradiology is the application of multimodal brain imaging toward early and subclinical detection of brain disease and subsequent preventive actions through identification of modifiable risk factors. An insightful example of this is in the area of age-related cognitive decline, mild cognitive impairment, and dementia with potentially modifiable risk factors such as obesity, diet, sleep, hypertension, diabetes, depression, supplementation, smoking, and physical activity. In studying this link between lifestyle and cognitive decline, brain imaging markers may be instrumental as quantitative measures or even indicators of early disease. The purpose of this article is to provide an overview of the major studies reflecting how lifestyle factors affect the brain and cognition aging. In this hot topics review, we will specifically focus on obesity and physical activity.
Subject(s)
Alzheimer Disease/diagnosis , Alzheimer Disease/prevention & control , Cognitive Dysfunction/diagnosis , Cognitive Dysfunction/prevention & control , Diagnostic Imaging , Age Factors , Aged , Aging , Alzheimer Disease/etiology , Brain , Cognitive Dysfunction/etiology , Depression/complications , Diabetes Complications/diagnosis , Humans , Hypertension/complications , Life Style , Research , Risk FactorsABSTRACT
Regular physical activity exerts positive effects on anxiety disorder symptoms, although the biological mechanisms underpinning this effect are incompletely understood. Numerous lines of evidence support inflammation and oxidative and nitrogen stress (O&NS) as important in the pathogenesis of mood and anxiety disorders, and physical activity is known to influence these same pathways. This paper reviews the inter-relationships between anxiety disorders, physical activity and inflammation and O&NS, to explore whether modulation of inflammation and O&NS may in part underpin the positive effect of physical activity on anxiety disorders. Numerous studies support the notion that physical activity operates as an anti-inflammatory and anti-O&NS agent which potentially exerts positive effects on neuroplasticity, the expression of neurotrophins and normal neuronal functions. These effects may therefore influence the expression and evolution of anxiety disorders. Further exploration of this area may elicit a deeper understanding of the pathogenesis of anxiety disorders, and inform the development of integrated programmes including PA specifically suited to the treatment and prevention of anxiety disorders and symptoms.
Subject(s)
Anxiety Disorders/psychology , Anxiety Disorders/therapy , Behavior/physiology , Exercise/physiology , Inflammation/physiopathology , Motor Activity/physiology , Oxidative Stress/physiology , Reactive Nitrogen Species/physiology , Animals , Exercise Therapy , Humans , Neuronal Plasticity/physiologyABSTRACT
In some patients with major depressive disorder (MDD), individual illness characteristics appear consistent with those of a neuroprogressive illness. Features of neuroprogression include poorer symptomatic, treatment and functional outcomes in patients with earlier disease onset and increased number and length of depressive episodes. In such patients, longer and more frequent depressive episodes appear to increase vulnerability for further episodes, precipitating an accelerating and progressive illness course leading to functional decline. Evidence from clinical, biochemical and neuroimaging studies appear to support this model and are informing novel therapeutic approaches. This paper reviews current knowledge of the neuroprogressive processes that may occur in MDD, including structural brain consequences and potential molecular mechanisms including the role of neurotransmitter systems, inflammatory, oxidative and nitrosative stress pathways, neurotrophins and regulation of neurogenesis, cortisol and the hypothalamic-pituitary-adrenal axis modulation, mitochondrial dysfunction and epigenetic and dietary influences. Evidence-based novel treatments informed by this knowledge are discussed.
Subject(s)
Brain , Depressive Disorder, Major , Animals , Brain/metabolism , Brain/pathology , Brain/physiopathology , Depressive Disorder, Major/complications , Depressive Disorder, Major/pathology , Depressive Disorder, Major/therapy , Disease Progression , Encephalitis/etiology , Humans , Neurotransmitter Agents/metabolism , Oxidative Stress/physiology , Oxidoreductases/metabolismABSTRACT
Use of complementary medicines and therapies (CAM) and modification of lifestyle factors such as physical activity, exercise, and diet are being increasingly considered as potential therapeutic options for anxiety disorders. The objective of this metareview was to examine evidence across a broad range of CAM and lifestyle interventions in the treatment of anxiety disorders. In early 2012 we conducted a literature search of PubMed, Scopus, CINAHL, Web of Science, PsycInfo, and the Cochrane Library, for key studies, systematic reviews, and metaanalyses in the area. Our paper found that in respect to treatment of generalized anxiety or specific disorders, CAM evidence revealed current support for the herbal medicine Kava. One isolated study shows benefit for naturopathic medicine, whereas acupuncture, yoga, and Tai chi have tentative supportive evidence, which is hampered by overall poor methodology. The breadth of evidence does not support homeopathy for treating anxiety. Strong support exists for lifestyle modifications including adoption of moderate exercise and mindfulness meditation, whereas dietary improvement, avoidance of caffeine, alcohol, and nicotine offer encouraging preliminary data. In conclusion, certain lifestyle modifications and some CAMs may provide a beneficial role in the treatment of anxiety disorders.
ABSTRACT
BACKGROUND: The aim of the study was to assess the appropriateness of use of fresh-frozen plasma (FFP) at Royal Darwin Hospital against the National Health and Medical Research Council and Australian and New Zealand Society for Blood Transfusion guidelines. METHODS: A retrospective review of blood product request forms, online pathology storage system data, pathology records and clinical notes between 1 January 2006 and 31 December 2006 was carried out. The appropriateness of requests was assessed against existing guidelines. The percentage of appropriate and inappropriate FFP transfusions was obtained. RESULTS: Six hundred and forty-eight of 950 units (68%) of FFP were used with an appropriate indication as per National Health and Medical Research Council/Australian and New Zealand Society for Blood Transfusion guidelines. Of the remaining units, 14% (137 units) was given without a clear indication and a decision of appropriateness could not be established for 17% (165 units) because of inadequate clinical or pathology information (e.g. coagulation results). Multiple issues around prescribing practice were identified. CONCLUSION: There is significant use of FFP at Royal Darwin Hospital without clear clinical indication. The employment of a transfusion nurse to monitor use of FFP (and other blood products) and provide education is aimed at improving transfusion efficiency and patient safety.
Subject(s)
Blood Component Transfusion/methods , Hospitals , Medical Audit/methods , Plasma , Blood Component Transfusion/standards , Hospitals/standards , Humans , Medical Audit/standards , Northern Territory , Practice Guidelines as Topic/standards , Retrospective StudiesABSTRACT
A double-blind, randomized study compared the cardiovascular responses and extubation conditions using lignocaine or cocaine for topical anaesthesia of the larynx. Absorption of both agents from the trachea was quantified by serial venous plasma concentrations. Serial blood pressure, ECG, O2 saturation and end-tidal carbon dioxide measurements were obtained. Conditions at extubation were assessed on duration of coughing, graded on a scale of 1-4 (1 = no coughing, 2 = single cough, 3 = coughing lasting less than 30 s, 4 = coughing lasting 30 s or more). No difference was found in cardiovascular measurements between the two groups. The patterns of absorption of cocaine and lignocaine from the laryngeal mucosa were very similar, with peak absorption occurring at 10-15 min after laryngeal spraying. Although cocaine reduced the incidence of post-operative coughing when compared with lignocaine, this did not reach statistical significance.
Subject(s)
Anesthesia, Local , Cocaine , Intubation, Intratracheal , Larynx , Absorption , Adult , Aerosols , Aged , Aged, 80 and over , Blood Pressure/drug effects , Cocaine/administration & dosage , Cocaine/blood , Cocaine/pharmacokinetics , Cough/etiology , Double-Blind Method , Humans , Intermittent Positive-Pressure Ventilation , Larynx/metabolism , Lidocaine/administration & dosage , Lidocaine/blood , Lidocaine/pharmacokinetics , Middle Aged , Pulse/drug effects , Time FactorsABSTRACT
Three experiments showed that mood influences achievement attributions and that cognitive processes underlie these effects. In Experiment 1, happy Ss made more internal and stable attributions for success than failure in typical 'life dilemmas'. In Experiment 2, attributions for real-life exam performance were more internal and stable in a happy than in a sad mood. Dysphoric moods resulted in self-critical rather than self-enhancing attributions, contrary to motivational theories, but consistent with cognitive models and the clinical literature on depression. In Experiment 3 this pattern was repeated with direct self vs. other comparisons, and for self-efficacy judgements. The results are interpreted as supporting cognitive rather than motivational theories of attribution biases. The implications of the results for clinical research, and contemporary affect-cognition theories are considered.