Epidemiology and estimated economic impact of musculoskeletal injuries in polytrauma patients in a level one trauma centre in Singapore.

Introduction: Musculoskeletal injuries are the most common reason for surgical intervention in polytrauma patients. Methods: This is a retrospective cohort study of 560 polytrauma patients (injury severity score [ISS] >17) who suffered musculoskeletal injuries (ISS >2) from 2011 to 2015 in National University Hospital, Singapore. Results: 560 patients (444 [79.3%] male and 116 [20.7%] female) were identified. The mean age was 44 (range 3-90) years, with 45.4% aged 21-40 years. 39.3% of the patients were foreign migrant workers. Motorcyclists were involved in 63% of road traffic accidents. The mean length of hospital stay was 18.8 (range 0-273) days and the mean duration of intensive care unit (ICU) stay was 5.7 (range 0-253) days. Patient mortality rate was 19.8%. A Glasgow Coma Scale (GCS) score <12 and need for blood transfusion were predictive of patient mortality (p < 0.05); lower limb injuries, road traffic accidents, GCS score <8 and need for transfusion were predictive of extended hospital stay (p < 0.05); and reduced GCS score, need for blood transfusion and upper limb musculoskeletal injuries were predictive of extended ICU stay. Inpatient costs were significantly higher for foreign workers and greatly exceeded the minimum insurance coverage currently required. Conclusion: Musculoskeletal injuries in polytrauma remain a significant cause of morbidity and mortality, and occur predominantly in economically productive male patients injured in road traffic accidents and falls from height. Increasing insurance coverage for foreign workers in high-risk jobs should be evaluated.

Should the location of distal tibial plating be influenced by the varus or valgus fracture pattern of tibial pilon fracture?

INTRODUCTION: Operative treatment of tibial pilon fracture is challenging. There is a lack of consensus and only one clinical study on the optimal location of distal tibial plating for fixation of pilon fractures based on varus or valgus fracture patterns. We hypothesize that complications rates, specifically mechanical complications, are not influenced by the location of the tibial plating in the fixation of pilon fractures with respect to varus or valgus fracture patterns. MATERIALS AND METHODS: Sixty-nine patients who had single plating for tibial pilon from 2007 to 2017 were recruited. They were divided into two groups, transverse fibular fracture (varus fracture pattern) and comminuted fibular fracture (valgus fracture pattern). Our primary outcome measure was any mechanical complications as a result of the location of plating (medial vs lateral) on varus or valgus fracture patterns. RESULTS: There were 38 (55.1%) patients with varus fracture pattern and 31 (44.9%) patients with valgus fracture pattern tibial pilon fractures. In the varus fracture pattern group, mechanical complications were not significantly different between the two plating locations (27.3 vs 33.3%, p > 0.05). Notably, there were more fibula fixations performed in patients with medial plating (74.1 vs 45.5%, p = 0.092) when compared those with lateral plating in the varus fracture pattern group. There were also no statistically significant differences found although 10 (40%) out of 25 patients had mechanical complications in the medial plating group compared to 1 (16.7%) out of 6 patients with lateral plating (p = 0.383) in the valgus fracture pattern group. CONCLUSION: There were no differences in mechanical complications for medial vs lateral plating in tibial pilon fracture based on varus or valgus deforming forces. As much as we should consider the fracture patterns and deforming forces when deciding on plating location, other factors such as careful soft tissue management and fragment-specific fixation should be prioritized.

Anatomic Basis for Minimally Invasive Flexor Hallucis Longus Transfer in Chronic Achilles Tendon Rupture.

The present cadaveric study was designed to measure the flexor hallucis longus (FHL) tendon length and obtain anatomic data regarding the graft-to-tunnel length ratio in an interference screw fixation model for the FHL short-harvest single-incision technique to the calcaneus. Ten fresh-frozen paired cadaveric specimens were used for the FHL short-harvest technique. The length of the osseous tunnel in the calcaneus was measured. At harvesting of the FHL tendon, the length of the tendon that traverses the osseous tunnel was measured with the ankle in neutral and maximal plantarflexion from the tip of the osseous tunnel to the transected end of the tendon within the bone tunnel. The mean length of the osseous tunnel was 42.7 ± 2.3 (range 38 to 46) mm. With the ankle in neutral position, the mean length of the FHL tendon traversing the bone tunnel was 31 ± 1.7 (range 29 to 34) mm. This mean length increased to 38.8 ± 1.6 (range 36 to 41) mm with the ankle placed in maximal plantarflexion. The ratio of the mean length of the tendon graft to the mean length of the osseous tunnel with the ankle in neutral was 0.727 ± 0.046 (range 0.667 to 0.81), and the ratio was 0.91 ± 0.042 (range 0.864 to 0.976) when the ankle was maximally plantarflexed. To the best of our knowledge, we report for the first time that the short-harvest technique provides >70% (ratio 0.727) of the FHL tendon graft in the osseous tunnel at all times, even when then ankle is in neutral, resulting in sufficient tendon length for FHL tendon transfer to the calcaneus for chronic Achilles tendon rupture.

Accuracy of sacroiliac screw placement with and without intraoperative navigation and clinical application of the sacral dysmorphism score.

INTRODUCTION: Percutaneously-placed sacroiliac (SI) screws are currently the gold-standard fixation technique for fixation of the posterior pelvic ring. The relatively high prevalence of sacral dysmorphism in the general population introduces a high risk of cortical breach with resultant neurovascular damage. This study was performed to compare the accuracy of SI screw placement with and without the use of intraoperative navigation, as well as to externally validate the sacral dysmorphism score in a trauma patient cohort. PATIENTS AND METHODS: All trauma patients who underwent sacroiliac screw fixation for pelvic fractures at a level 1 trauma centre over a 6 year period were identified. True axial and coronal sacral reconstructions were obtained from their pre-operative CT scans and assessed qualitatively and quantitatively for sacral dysmorphism - a sacral dysmorphism score was calculated by two independent assessors. Post-operative CT scans were then analysed for breaches and correlated with the hospital medical records to check for any clinical sequelae. RESULTS: 68 screws were inserted in 36 patients, most sustaining injuries from road traffic accidents (50%) or falls from height (36.1%). There was a male preponderance (83.3%) with the majority of the screws inserted percutaneously (86.1%). Intraoperative navigation was used in 47.2% of the patient cohort. 30.6% of the cohort were found to have dysmorphic sacra. The mean sacral dysmorphism scores were not significantly different between navigated and non-navigated groups. Three cortical breaches occurred, two in patients with sacral dysmorphism scores >70 and occurring despite the use of intraoperative navigation. There was no significant difference in the rates of breach between navigated and non-navigated groups. None of the breaches resulted in any clinically observable neurovascular deficit. CONCLUSION: The sacral dysmorphism score can be clinically applied to a cohort of trauma patients with pelvic fractures. In patients with highly dysmorphic sacra, reflected by high sacral dysmorphism scores, intraoperative navigation is not in itself sufficient to prevent cortical breaches. In such patients it would be prudent to consider instrumentation of the lower sacral corridors instead.

Intraoperative periprosthetic femur fracture during bipolar hemiarthroplasty for displaced femoral neck fractures.

INTRODUCTION: We aim to review the incidence and risk factors for the development of intraoperative periprosthetic femur fractures while performing a bipolar hemiarthroplasty for displaced neck of femur fractures. Our secondary aim is to characterize the types of intraoperative periprosthetic fractures, the steps leading to the fractures, and the salvage treatments instituted. MATERIALS AND METHODS: 271 patients treated with bipolar hemiarthroplasty after traumatic displaced femoral neck fractures were retrospectively analyzed. Demographic data, co-morbidities, vitamin D level, consumption of steroids, ASA score, surgical approach, surgeon experience, use of cemented or uncemented implants, proximal femur morphology, and types of anaesthesia were analyzed statistically. RESULTS: There were 28 patients (10.3%) with intraoperative periprosthetic femur fractures. We found two significant independent risk factors which were the use of uncemented prosthesis (OR 4.15; 95% CI 1.65-10.46; p = 0.003) and Dorr type C proximal femurs (Dorr A OR 3.6; 95% CI 1.47-8.82; p = 0.005). In addition, patients with Dorr type C proximal femurs who underwent uncemented bipolar hemiarthroplasty were more likely to sustain an intraoperative periprosthetic fracture (14(73.7%) out of 19 patients; p = 0.002). There were no significant differences found in other risk factors. The most common location for these fractures was at the greater trochanter at 11 (39.3%) cases. Majority of them, 15 (53.6%), had intraoperative fractures during trial implant insertion and reduction. CONCLUSION: The overall incidence of intraoperative periprosthetic femur fractures during hemiarthroplasty for displaced neck of femur fractures was 10.3%. The incidence was significantly higher for uncemented (14.7%) when compared to cemented prosthesis (5.4%) and the greater trochanter was the commonest area for periprosthetic fractures during trial implant insertion and reduction. Uncemented prosthesis and Dorr type C proximal femurs were two significant independent risk factors contributing to intraoperative periprosthetic fractures. By identifying these risk factors, surgeons can take ample precautions to prevent complications.

Male orthopaedic surgeons and anaesthetists: equally good at estimating fluid volumes (and changing light bulbs) but equally poor at estimating procedure duration.

INTRODUCTION: How many orthopods does it take to change a light bulb? One - to refer to the medics for 'Darkness ?Cause'. Additionally, anaesthetists and surgeons often disagree on the estimated blood loss during surgery and the estimated procedure duration. We designed this study to compare the ability of orthopaedic surgeons and anaesthetists in: (a) estimating fluid volumes; (b) estimating procedure durations; and (c) changing light bulbs. METHODS: Participants had to either be a specialist in anaesthesia or orthopaedic surgery, or a trainee in that specialty for at least two years. Three different fluid specimens were used for volume estimation (44 mL, 88 mL and 144 mL). Two videos of different lengths (140 seconds and 170 seconds), showing the suturing of a banana skin, were used for procedure duration estimation. To determine the ability at changing light bulbs, the participants had to match eight different light sockets to their respective bulbs. RESULTS: 30 male anaesthetists and trainees and 31 male orthopaedic surgeons and trainees participated in this study. Orthopaedic surgeons underestimated the three fluid volumes by 3.9% and anaesthetists overestimated by 5.1% (p = 0.925). Anaesthetists and orthopaedic surgeons overestimated the duration of the two procedures by 21.2% and 43.1%, respectively (p = 0.006). Anaesthetists had a faster mean time in changing light bulbs (70.1 seconds vs. 74.1 seconds, p = 0.319). CONCLUSION: In an experimental environment, male orthopaedic surgeons are as good as male anaesthetists in estimating fluid volumes (in commonly seen surgical specimens) and in changing light bulbs. Both groups are poor at estimating procedure durations.

Clinical outcomes of distal femoral fractures in the geriatric population using locking plates with a minimally invasive approach.

BACKGROUND: Fractures of the distal femur comprise 4% to 6% of all femoral fractures. Elderly patients are predisposed to low-energy fractures due to osteoporosis. Treatment of these fractures in the elderly group remains a challenge. Our hypothesis is that locking plates inserted with minimally invasive plate osteosynthesis (MIPO) techniques will produce better results compared to those inserted by open technique. The objective of this study is to evaluate the clinical outcomes of MIPO technique using locking plates in the elderly patients. MATERIALS AND METHODS: A total of 24 elderly patients (mean age 73 years) with distal femur fractures treated using the MIPO technique (2007-2010) were reviewed retrospectively. Parameters analyzed included classification of fracture, time to fracture union, knee range of motion, functional knee score (Knee Society Score-Functional) at 6 months, and other significant complications. One patient was lost to follow-up. RESULTS: In all, 88% of the fractures were extraarticular. The mean time to union was 13.48 (range: 8-28) weeks. Mean range of motion achieved at 6 months and beyond was 100° ranging from 0 to 30 (extension) to 90 to 140 (flexion). Functional knee scores at 6 months from fixation were satisfactory (mean score 88.8). There were no cases of implant failure, nonunion, and infection. In all, 6 (25%) patients developed deep vein thrombosis (DVT) in the early postoperative period, all of which were below the level of the knee joint. CONCLUSION: Locking plates inserted using MIPO techniques in elderly patients with distal femur fractures appear to be promising based on clinical outcome measurements. However, there was a high incidence of DVT noted.