ABSTRACT
Due to the relatively low photoluminescence quantum yield (PLQY) and horizontal dipole orientation of doped films, anthracene-based fluorescent organic light-emitting diodes (F-OLEDs) have faced a great challenge to achieve high external quantum efficiency (EQE). Herein, a novel approach is introduced by incorporating penta-helicene into anthracene, presented as linear-shaped 3-(4-(10-phenylanthracen-9-yl)phenyl)dibenzo[c,g]phenanthrene (BABH) and 3-(4-(10-(naphthalen-2-yl)anthracen-9-yl)phenyl)dibenzo[c,g]phenanthrene (NABH). These blue hosts exhibit minimal intermolecular overlap of π-π stacking, effectively suppressing excimer formation, which facilitates the effective transfer of singlet energy to the fluorescent dopant for PLQY as high as 90%. Additionally, the as-obtained two hosts of BABH and NABH have effectively demonstrated major horizontal components transition dipole moments (TDM) and high thermal stability with glass transitional temperature (Tg) surpassing 188 °C, enhancing the horizontal dipole orientation of their doped films to be 89% and 93%, respectively. The OLEDs based on BABH and NABH exhibit excellent EQE of 10.5% and 12.4% at 462 nm and device lifetime up to 90% of the initial luminance over 4500 h at 100 cd m-2, which has firmly established them as among the most efficient blue F-OLEDs based on anthracene to date to the best knowledge. This work provides an instructive strategy to design an effective host for highly efficient and stable F-OLEDs.
ABSTRACT
In this study, a PANI/NiO/Graphene (PNG) nanocomposite was synthesized using a cost-effective wet chemical polymerization method. This nanocomposite was used to fabricate supercapacitor electrodes in a nontoxic, noncorrosive, and neutral hybrid gel polymer (PVA/Na2SO4) electrolyte. The electrodes made from the PNG material underwent analysis using electrochemical techniques, including cyclic voltammetry (CV) and electrochemical impedance spectroscopy in a three-electrode system. For a deeper exploration of the supercapacitive properties of the PNG material, galvanostatic charge-discharge was employed. A practical two-electrode symmetric device powered by the hybrid PVA/Na2SO4 electrolyte was fabricated to calculate specific capacitance, energy density, and power density. The designed PNG material demonstrates excellent electrochemical behavior, exhibiting an improved energy density of 59.41 W h/kg at 850 W/kg. Furthermore, the PNG electrode shows excellent reversibility along with enhanced energy density and retains 89% of its capacitance after 2000 cycles. These outstanding properties of the PNG material can be attributed to the synergistic effect of PANI nanofibrous, NiO, and graphene two-dimensional structures.
ABSTRACT
Maternal, newborn, and child health (MNCH) has remained an ever-concerning area for hospital management and researchers throughout the world. Nevertheless, in the literature, less attention is paid to developing countries. The current study identifies the problems faced by maternal newborn and child health projects at each phase. We obtained data on MNCH projects via interviews from district project managers and extracted various themes for each phase of the MNCH project. The results indicated the most significant problems faced by the MNCH project emanate from the inefficient bureaucratic structure, lack of realistic planning, weak working environment, political interference, and inefficient knowledge acquisition. The current study found that project managers experience various problems from the initiation stage of the project to its closure. Additionally, they find themselves to be poorly equipped to manage such problems. We proposed various strategies such as implementing a bottom-up management approach, more decentralization, establishing patient feedback systems, giving more authority to the project managers, and so forth.
Subject(s)
Public Health , Child , Child Health , Female , Humans , Infant, Newborn , Male , Maternal-Child Health CentersABSTRACT
Two new highly thermally stable [1]benzothieno[3,2-b][1]benzothiophene (BTBT) dimeric derivatives, namely 1,4-bis([1]benzothieno[3,2-b][1]benzothiophene-2-yl)benzene (BTBT-Ph-BTBT) and 4,4'-bis([1]benzothieno[3,2-b][1]benzothiophene-2-yl)-1,1'-biphenyl (BTBT-DPh-BTBT), were synthesized by combining two simple fragment structures. Compared to the monomer compound 2-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT, µmax =3.4×10-2 â cm2 V-1 s-1 ), the organic thin-film transistors (OTFTs) based on BTBT-Ph-BTBT and BTBT-DPh-BTBT showed significantly higher mobility (up to 2.5 and 3.6â cm2 V-1 s-1 for BTBT-Ph-BTBT and BTBT-DPh-BTBT, respectively). The mobility of OTFTs based on BTBT-Ph-BTBT was kept at a high value (2.4×10-1 â cm2 V-1 s-1 ) after the devices were thermally annealed at 350 °C. Furthermore, the organic phototransistors (OPTs) based on BTBT-Ph-BTBT and BTBT-DPh-BTBT displayed high photosensitivities in a range of 250-400â nm with a low intensity, making these materials potentially applicable for sensitive optoelectronic devices.
ABSTRACT
AIM: The aim of study was to evaluate the dosimetric effect of collimator-rotation on VMAT plan quality, when using limited aperture multileaf collimator of Elekta Beam Modulator™ providing a maximum aperture of 21 cm × 16 cm. BACKGROUND: The increased use of VMAT technique to deliver IMRT from conventional to very specialized treatments present a challenge in plan optimization. In this study VMAT plans were optimized for prostate and head and neck cancers using Elekta Beam-ModulatorTM, whereas previous studies were reported for conventional Linac aperture. MATERIALS AND METHODS: VMAT plans for nine of each prostate and head-and-neck cancer patients were produced using the 6 MV photon beam for Elekta-SynergyS® Linac using Pinnacle3 treatment planning system. Single arc, dual arc and two combined independent-single arcs were optimized for collimator angles (C) 0°, 90° and 0°-90° (0°-90°; i.e. the first-arc was assigned C0° and second-arc was assigned C90°). A treatment plan comparison was performed among C0°, C90° and C(0°-90°) for single-arc dual-arc and two independent-single-arcs VMAT techniques to evaluate the influence of extreme collimator rotations (C0° and 90°) on VMAT plan quality. Plan evaluation criteria included the target coverage, conformity index, homogeneity index and doses to organs at risk. A 'two-sided student t-test' (p ≤ 0.05) was used to determine if there was a significant difference in dose volume indices of plans. RESULTS: For both prostate and head-and-neck, plan quality at collimator angles C0° and C(0°-90°) was clinically acceptable for all VMAT-techniques, except SA for head-and-neck. Poorer target coverage, higher normal tissue doses and significant p-values were observed for collimator angle 90° when compared with C0° and C(0°-90°). CONCLUSIONS: A collimator rotation of 0° provided significantly better target coverage and sparing of organs-at-risk than a collimator rotation of 90° for all VMAT techniques.
ABSTRACT
Herein we report a novel design philosophy of tandem OLEDs incorporating a doping-free green phosphorescent bis[2-(2-pyridinyl-N)phenyl-C](acetylacetonato)iridium(III) (Ir(ppy)2(acac)) as an ultrathin emissive layer (UEML) into a novel interface-exciplex-forming structure of 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and 1,3,5-tri(p-pyrid-3-yl-phenyl)benzene (TmPyPB). Particularly, relatively low working voltage and remarkable efficiency are achieved and the designed tandem OLEDs exhibit a peak current efficiency of 135.74 cd/A (EQE = 36.85%) which is two times higher than 66.2 cd/A (EQE = 17.97%) of the device with a single emitter unit. This might be one of the highest efficiencies of OLEDs applying ultrathin emitters without light extraction. Moreover, with the proposed structure, the color gamut of the displays can be effectively increased from 76% to 82% NTSC if the same red and blue emissions as those in the NTSC are applied. A novel form of harmonious fusion among interface exciplex, UEML, and tandem structure is successfully realized, which sheds light on further development of ideal OLED structure with high efficiency, simplified fabrication, low power consumption, low cost, and improved color gamut, simultaneously.
ABSTRACT
One of the most striking features of organic semiconductors compared with their corresponding inorganic counterparts is their molecular diversity. The major challenge in organic semiconductor material technology is creating molecular structural motifs to develop multifunctional materials in order to achieve the desired functionalities yet to optimize the specific device performance. Azo-compounds, because of their special photoresponsive property, have attracted extensive interest in photonic and optoelectronic applications; if incorporated wisely in the organic semiconductor groups, they can be innovatively utilized in advanced smart electronic applications, where thermal and photo modulation is applied to tune the electronic properties. On the basis of this aspiration, a novel azo-functionalized liquid crystal semiconductor material, (E)-1-(4-(anthracen-2-yl)phenyl)-2-(4-(decyloxy)phenyl)diazene (APDPD), is designed and synthesized for application in organic thin-film transistors (OTFTs). The UV-vis spectra of APDPD exhibit reversible photoisomerizaton upon photoexcitation, and the thin films of APDPD show a long-range orientational order based on its liquid crystal phase. The performance of OTFTs based on this material as well as the effects of thermal treatment and UV-irradiation on mobility are investigated. The molecular structure, stability of the material, and morphology of the thin films are characterized by thermal gravimetric analysis (TGA), polarizing optical microscopy (POM), (differential scanning calorimetry (DSC), UV-vis spectroscopy, atomic force microscopy (AFM), and scanning tunneling microscopy (STM). This study reveals that our new material has the potential to be applied in optical sensors, memories, logic circuits, and functional switches.
ABSTRACT
White-light-emitting materials with high mobility are necessary for organic white-light-emitting transistors, which can be used for self-driven OLED displays or OLED lighting. In this study, we combined two materials with similar structures-2-fluorenyl-2-anthracene (FlAnt) with blue emission and 2-anthryl-2-anthracence (2A) with greenish-yellow emission-to fabricate OLED devices, which showed unusual solid-state white-light emission with the CIE coordinates (0.33, 0.34) at 10â V. The similar crystal structures ensured that the OTFTs based on mixed FlAnt and 2A showed high mobility of 1.56â cm2 V-1 s-1 . This simple method provides new insight into the design of high-performance white-emitting transistor materials and structures.
ABSTRACT
A novel exciplex-forming host is applied so as to design highly simplified reddish orange light-emitting diodes (OLEDs) with low driving voltage, high efficiency, and an extraordinarily low efficiency roll-off, by combining N,N-10-triphenyl-10H-spiro [acridine-9,9'-fluoren]-3'-amine (SAFDPA) with 4,7-diphenyl-1,10-phenanthroline (Bphen) doped with trivalent iridium complex bis(2-methyldibenzo[f,h]quinoxaline) (acetylacetonate)iridium(III) (Ir(MDQ)2(acac)). The reddish orange OLEDs achieve a strikingly high power efficiency (PE) of 31.80 lm/W with an ultralow threshold voltage of 2.24 V which is almost equal to the triplet energy level of the phosphorescent reddish orange emitting dopant. The power efficiency of the device with the exciplex-forming host is enhanced, achieving 36.2% mainly owing to the lower operating voltage by the novel exciplex forming cohost, compared with the reference device (23.54 lm/W). Moreover, the OLEDs show extraordinarily low current efficiency (CE) roll-off to 1.41% at the brightness from 500 to 5000 cd/m2 with a maximal CE of 32.87 cd/A (EQEmax = 11.01%). The devices display a good reddish orange color (CIE of (0.628, 0.372) at 500 cd/m2) nearly without color shift with increasing brightness. Co-host architecture phosphorescent OLEDs show a simpler device structure, lower working voltage, and a better efficiency and stability than those of the reference devices without the cohost architecture, which helps to simplify the OLED structure, lower the cost, and popularize OLED technology.
ABSTRACT
Organic electrochromic materials change color rapidly under applied potential. A butterfly-shaped compound, 5,5',-5â³,-5'â³-(thieno[3,2-b]thiophene-2,3,5,6-tetrayl) tetrakis-(2,3-dihydrothieno[3,4-b][1,4]dioxine) (t-EDOT-TT) is synthesized for the first time and polymerized at different potentials via electropolymerization technique. By applying different polymerization potentials, the optical and electrochromic properties of this newly synthesized polymer can be tuned. Owing to the dependence of functional group position in the polymer structure on the redox potential, this polymer can be utilized in very interesting organic optoelectronic applications.