ABSTRACT
BACKGROUND: This study investigated the impact of surgical modalities on surgeon wellbeing with a focus on burnout, job satisfaction, and interventions used to address neuromusculoskeletal disorders (NMSDs). METHODS: An electronic survey was sent to surgeons across an academic integrated multihospital system. The survey consisted of 47 questions investigating different aspects of surgeons' wellbeing. RESULTS: Out of 245 thoracic and abdominopelvic surgeons, 79 surgeons (32.2 â%) responded, and 65 surgeons (82 â%) were able to be categorized as having a dominant surgical modality. Compared to robotic surgeons, laparoscopic (p â= â0.042) and open (p â= â0.012) surgeons reported more frequent feelings of burnout. The number of surgeons who used any treatment/intervention to minimize the operative discomfort/pain was lower for robotic surgeons than the other three modalities (all p â< â0.05). CONCLUSIONS: NMSDs affect different aspects of surgeons' lives and occupations. Robotic surgery was associated with decreased feelings of burnout than the other modalities.
ABSTRACT
BACKGROUND: The surgical profession is plagued with a high prevalence of work-related musculoskeletal disorders. While numerous interventions have been tested over the years, surgical ergonomics education is still uncommon. METHODS: The available literature on surgical ergonomics was reviewed, and with input from surgeons, recommendations from the review were used to create pictorial reminders for open, laparoscopic, and robot-assisted surgical modalities. These simple pictorial ergonomic recommendations were then assessed for practicality by residents and surgeons. RESULTS: A review of the current literature on surgical ergonomics covered evidence-based ergonomic recommendations on equipment during open and laparoscopic surgery, as well as proper adjustment of the surgical robot for robot-assisted surgeries. Ergonomic operative postures for the three modalities were examined, illustrated, and assessed. CONCLUSIONS: The resulting illustrations of ergonomic guidelines across surgical modalities may be employed in developing ergonomic education materials and improving the identification and mitigation of ergonomic risks in the operating room.
ABSTRACT
BACKGROUND: We compared surgeons' workload, physical discomfort, and neuromusculoskeletal disorders (NMSDs) across four surgical modalities: endoscopic, laparoscopic, open, and robot-assisted (da Vinci Surgical Systems). METHODS: An electronic survey was sent to the surgeons across an academic hospital system. The survey consisted of 47 questions including: (I) Demographics and anthropometrics; (II) The percentage of the procedural time that the surgeon spent on performing each surgical modality; (III) Physical and mental demand and physical discomfort; (IV) Neuromusculoskeletal symptoms including body part pain and NMSDs. RESULTS: Seventy-nine out of 245 surgeons completed the survey (32.2%) and 65 surgeons (82.2%) had a dominant surgical modality: 10 endoscopic, 15 laparoscopic, 26 open, and 14 robotic surgeons. Physical demand was the highest for open surgery and the lowest for endoscopic and robotic surgeries, (all p < 0.05). Open and robotic surgeries required the highest levels of mental workload followed by laparoscopic and endoscopic surgeries, respectively (all p < 0.05 except for the difference between robotic and laparoscopic that was not significant). Body part discomfort or pain (immediately after surgery) were lower in the shoulder for robotic surgeons compared to laparoscopic and open surgeons and in left fingers for robotic surgeons compared to endoscopic surgeons (all p < 0.05). The prevalence of NMSD was significantly lower in robotic surgeons (7%) compared to the other surgical modalities (between 60 and 67%) (all p < 0.05). CONCLUSIONS: The distribution of NMSDs, workload, and physical discomfort varied significantly based on preferred surgical approach. Although robotic surgeons had fewer overall complaints, improvement in ergonomics of surgery are still warranted.
Subject(s)
Laparoscopy , Robotic Surgical Procedures , Robotics , Surgeons , Humans , Ergonomics , Pain , Laparoscopy/adverse effectsABSTRACT
This study investigated vascular surgeon workload and its association with specific procedural drivers over different procedure types. Thirteen attending vascular surgeons (two females) were emailed a survey over a 3-month period. Data from 253 surgical procedures (118 open, 85 endovascular, 18 hybrid, and 32 venous) revealed high physical and cognitive workload among vascular surgeons. Based on the statistically significant findings and similar non-significant trends in the data (significance level of 0.01), open and hybrid vascular procedures showed higher levels of physical and cognitive workload compared to venous cases, while endovascular procedures were relatively more moderate. Additionally, the workload subscales for five subcategories of open procedures (e.g., arteriovenous access) as well as three subcategories of endovascular procedures (e.g., aortic) were compared. The granularity of the intraoperative workload drivers across various vascular procedure types and adjunct equipment could be the key to create targeted ergonomic interventions to reduce workload during vascular surgeries.
Subject(s)
Surgeons , Workload , Female , Humans , Workload/psychology , Vascular Surgical Procedures , Ergonomics , Surgeons/psychology , Surveys and QuestionnairesABSTRACT
BACKGROUND: This study compared the ergonomics of surgeons during deep inferior epigastric perforator (DIEP) flap surgery using either baseline equipment (loupes, headlights, and an operating microscope) or an exoscope. Plastic surgeons may be at high risk of musculoskeletal problems. Recent studies indicate that adopting an exoscope may significantly improve surgeon postures and ergonomics. METHODS: Postural exposures, using inertial measurement units at the neck, torso, and shoulders, were calculated in addition to the surgeons' subjective physical and cognitive workload. An ergonomic risk score on a scale of 1 (lowest) to 4 (highest) was calculated for each of the postures observed. Data from 23 bilateral DIEP flap surgeries (10 baseline and 13 exoscope) were collected. RESULTS: The neck and torso risk scores decreased significantly during abdominal flap harvest and chest dissection, while right shoulder risk scores increased during the abdominal flap harvest for exoscope DIEP flap procedures compared with. Exoscope anastomoses demonstrated higher neck, right shoulder, and left shoulder risk scores. The results from the survey for the "surgeon at abdomen" showed that the usage of exoscopes was associated with decreased performance and increased mental demand, temporal demand, and effort. However, the results from the "surgeon at chest" showed that the usage of exoscopes was associated with lower physical demand and fatigue, potentially due to differences in surgeon preference. CONCLUSION: Our study revealed some objective evidence for the ergonomic benefits of exoscope; however, this is dependent on the tasks the surgeon is performing. Additionally, personal preferences may be an important factor to be considered in the ergonomic evaluation of the exoscope.
Subject(s)
Mammaplasty , Perforator Flap , Mammaplasty/methods , Ergonomics , Abdomen , Neck , Epigastric ArteriesABSTRACT
Objective: To identify change management (CM) strategies for implementing novel artificial intelligence and similar novel technologies in operating rooms and create a new CM model for future trials and applications inspired by the abovementioned strategies and established models. Methods: Key phases of technology implementation were defined, and strategies for transformational CM were created and applied in a recent CM experience at our institution between October 15, 2020 and October 15, 2021. We appraised existing CM models and propose the newly created model. Results: The key phases of the technology implementation were as follows: (1) team assembly; (2) committee approvals; (3) CM; and (4) system installation and go-live. Key strategies were (1) assemble team with necessary expertise; (2) anticipate potential institutional cultural and regulatory hurdles; (3) add agility to project planning and execution; (4) accommodate institutional culture and regulations; (5) early clinical partner buy-in and stakeholder engagement; and (6) consistent communication, all of which contributed to the new CM model creation. Conclusion: Key CM strategies and a new CM model addressing the unique needs and characteristics of operating room novel technology implementation were identified and created. The new model may be customized and tested for individual institution and project's needs and characteristics.
ABSTRACT
The goal of this study was to quantify and compare prospective self-reported intraoperative workload and teamwork during robot-assisted radical prostatectomy (RARP) for multi-port da Vinci Xi (MP) and single-port da Vinci SP (SP) robots. The self-reported workload (surgeon and surgical team) and teamwork (surgeon) measures were collected and compared between MP and SP RARPs, as well as the learning curve. Results from 25 MP and SP RARPs showed that overall, the NASA-TLX workload subscales were lower, and the teamwork modified NOTECHS subscales were higher for the MP RARPs compared to the SP RARPs. The underlying reason for the significant differences between these two RARP surgical procedures could be other factors (e.g., robot design factors) in addition to the surgeon and surgical team's experience. The results also suggested learning effects through the 25 SP RARPs; however, twenty-five procedures may not be enough to achieve proficiency with the SP system.
Subject(s)
Robotic Surgical Procedures , Robotics , Humans , Male , Prospective Studies , Prostatectomy/methods , Robotic Surgical Procedures/methods , WorkloadABSTRACT
The electromyographic (EMG) normalization (often to maximum voluntary isometric contraction [MVIC]) is used to control for interparticipant and day-to-day variations. Repeated MVIC exertions may be inadvisable from participants' safety perspective. This study developed a technique to predict the MVIC EMG from submaximal isometric voluntary contraction EMG. On day 1, 10 participants executed moment exertions of 100%, 60%, 40%, and 20% of the maximum (biceps brachii, rectus femoris, neck flexors, and neck extensors) as the EMG data were collected. On day 2, the participants replicated the joint moment values from day 1 (60%, 40%, and 20%) and also performed MVIC exertions. Using the ratios between the MVIC EMGs and submaximal isometric voluntary contraction EMG data values established on day 1, and the day 2 submaximal isometric voluntary contraction EMG data values, the day 2 MVIC EMGs were predicted. The average absolute percentage error between the predicted and actual MVIC EMG values for day 2 were calculated: biceps brachii, 45%; rectus femoris, 27%; right and left neck flexors, 27% and 33%, respectively; and right and left neck extensors, both 29%. There will be a trade-off between the required accuracy of the MVIC EMG and the risk of injury due to exerting actual MVIC. Thus, using the developed predictive technique may depend on the study circumstances.
Subject(s)
Isometric Contraction , Muscle, Skeletal , Arm , Electromyography/methods , Humans , Quadriceps MuscleABSTRACT
The objective of this project was to evaluate a battery of tests that could be used to assess fatigue development in the long-duration, seated operation of farming machinery. A battery of eight tests that had been previously used to assess aspects of human fatigue were assembled and human subject testing procedures (six participants in a laboratory study, eight in a field study) were employed to identify those tests that were sensitive to fatigue development in this context. In the laboratory study, participants maintained a seated posture for a period of 2 hours and experienced a controlled seat motion profile consistent with that of farm machinery working in a moderately rough field, while the field study participants experienced an 8-10 h ground preparation (heavy tillage with chisel plow) workday. The battery of tests considered included physiological assessments, human performance assessments, and subjective assessments. TIME was the independent variable. The non-parametric Kruskal-Wallis test was performed to assess the effects of TIME. Subjective assessments (Swedish Occupational Fatigue Inventory and Body Part Discomfort) had the strongest relationship with TIME, while two physiological assessments (heart rate and heart rate variability) were also shown to be affected by TIME. Subjective assessments were the strongest measures and objective measures heart rate and heart rate variability were effective at showing fatigue of the seated machinery operators. Human performance assessment approaches were not found to be predictors of fatigue of the seated operator.
Subject(s)
Fatigue , Posture , Agriculture , Fatigue/diagnosis , Heart Rate , Humans , Posture/physiology , SwedenABSTRACT
A systematic review was conducted to evaluate the relationship between occupational neck flexion angles and neck problems. The synthesised findings were used to answer three research questions: (1) Is there a positive/negative relationship between neck flexion and neck problems? (2) What is the appropriate angular threshold for neck flexion as a risk factor for neck problems? (3) What are the gaps in our current knowledge? A review of 21 papers revealed (1) a consistent positive correlation between neck flexion and neck problems, and (2) a neck flexion angle of 20° as the most evidence-based (not necessarily the best) cut-off angle separating high- and low-risk neck flexion postures. Future research should focus on the (1) continuous collection of three-dimensional neck postures through longitudinal studies to quantify cumulative exposures of neck postures, and (2) development of standard descriptions of 'neck problems' and 'neck flexion' to facilitate the development of a dose-response relationship. Practitioner summary: Practitioners depend on thresholds for evaluating neck postural exposure using work assessment tools; however, the scientific basis for this is unclear. This systematic review investigated the angular threshold for neck flexion and found 20° of neck flexion with the greatest evidence-based support as the threshold for high-risk neck postural exposure.
Subject(s)
Neck , Posture , Humans , Longitudinal Studies , Posture/physiology , Range of Motion, ArticularABSTRACT
Sustained non-neutral postures of the head/neck are related to transient neck discomfort and longer-term disorders of the neck. Periodic breaks can help but the ideal length and frequency of breaks are yet to be determined. The current study aimed to quantify the effects of three work-rest strategies on fatigue development. Participants maintained a 45-degree neck flexion posture for a total of 60 min and were provided 3 min of rest distributed in different ways throughout the experiment [LONG (one, 3-min break), MEDIUM (two, 1.5-min breaks), or SHORT (five, 36-s breaks)]. Surface electromyography data were collected from the bilateral neck extensors and trapezius. Subjective discomfort/fatigue ratings were also gathered. Results of the analysis of the EMG data revealed that the SHORT condition did not show increased EMG activity, while LONG [21%] and MEDIUM [10%] did (p < 0.05), providing objective data supporting the guidance of short, frequent breaks to alleviate fatigue.
Subject(s)
Occupational Diseases , Superficial Back Muscles , Adult , Electromyography , Humans , Muscle Fatigue , Muscle, Skeletal , Posture , ShoulderABSTRACT
Quantifying the workload and postural demand on vascular surgeons provides valuable information on the physical and cognitive factors that predispose vascular surgeons to musculoskeletal pain and disorders. The aim of this study was to quantify the postural demand, workload, and discomfort experienced by vascular surgeons and to identify procedural factors that influence surgical workload. Both objective (wearable posture sensors) and subjective (surveys) assessment tools were used to evaluate intraoperative workload during 47 vascular surgery procedures. Results demonstrate unfavorable neck and low back postures as well as high pain scores for those body segments. Additionally, workload from subjective surveys increased significantly as a function of operative duration, and mental workload was high across all procedure types. Neck postural risk exposure and physical demand were among the variables that increased with surgical duration, procedure type, and loupes used by the surgeons. Correlations among postural angles and pain scores showed consistency between the objective assessment and the subjective surveys for neck and trunk. The authors believe that the results of this study highlight the need for developing mitigating measures such as ergonomic interventions for vascular surgery.
Subject(s)
Musculoskeletal Pain , Surgeons , Ergonomics , Humans , Musculoskeletal Pain/etiology , Posture , WorkloadABSTRACT
OBJECTIVE: The goal of this work is to determine whether muscular fatigue concurrently reduces cognitive attentional resources in technical tasks for healthy adults. BACKGROUND: Muscular fatigue is common in the workplace but often dissociated with cognitive performance. A corpus of literature demonstrates a link between muscular fatigue and cognitive function, but few investigations demonstrate that the instigation of the former degrades the latter in a way that may affect technical task completion. For example, laparoscopic surgery increases muscular fatigue, which may risk attentional capacity reduction and undermine surgical outcomes. METHOD: A total of 26 healthy participants completed a dual-task cognitive assessment of attentional resources while concurrently statically fatiguing their shoulder musculature until volitional failure, in a similar loading pattern observed in laparoscopic procedures. Continuous and discrete monitoring task performance was recorded to reflect attentional resources. RESULTS: Electromyography of the anterior deltoid and descending trapezius, as well as self-assessment surveys indicated fatigue occurrence; continuous tracking error, tracking velocity, and response time significantly increased with muscular fatigue. CONCLUSION: Muscular fatigue concurrently degrades cognitive attentional resources. APPLICATION: Complex tasks that rely on muscular and cognitive performance should consider interventions to reduce muscular fatigue to also preserve cognitive performance.