ABSTRACT
Escherichia coli produces extracellular vesicles called outer membrane vesicles. In this study, we investigated the mechanism underlying the hypervesiculation of deletion mutant ΔrodZ of E. coli. RodZ forms supramolecular complexes with actin protein MreB and peptidoglycan (PG) synthase, and plays an important role in determining the cell shape. Because mreB is an essential gene, an expression-repressed strain (mreB R3) was constructed using CRISPRi, in which the expression of mreB decreased to 20% of that in the wild-type (WT) strain. In shaken-flask culture, the ΔrodZ strain produced >50 times more vesicles than the WT strain. The mreB-repressed strain mreB R3 showed eightfold higher vesicle production than the WT. ΔrodZ and mreB R3 cells were observed using quick-freeze replica electron microscopy. As reported in previous studies, ΔrodZ cells were spherical (WT cells are rod-shaped). Some ΔrodZ cells (around 7% in total) had aberrant surface structures, such as budding vesicles and dented surfaces, or curved patterns on the surface. Holes in the PG layer and an increased cell volume were observed for ΔrodZ and mreB R3 cells compared with the WT. In conditions of osmotic support using sucrose, the OD660 value of the ΔrodZ strain increased significantly, and vesicle production decreased drastically, compared with those in the absence of sucrose. This study first clarified that vesicle production by the E. coli ΔrodZ strain is promoted by surface budding and a burst of cells that became osmotically sensitive because of their incomplete PG structure.
ABSTRACT
Outer membrane vesicles (OMVs) are produced by Gram-negative bacteria and deliver microbial molecules to distant target cells in a host. OMVs secreted by probiotic probiotic strain Escherichia coli Nissle 1917 (EcN) have been reported to induce an immune response. In this study, we aimed to increase the OMV production of EcN. The double gene knockout of mlaE and nlpI was conducted in EcN because the ΔmlaEΔnlpI of experimental strain E. coli K12 showed the highest OMV production in our previous report. The ΔmlaEΔnlpI of EcN showed approximately 8 times higher OMV production compared with the parental (wild-type) strain. Quick-freeze, deep-etch replica electron microscopy revealed that plasmolysis occurred in the elongated ΔmlaEΔnlpI cells and the peptidoglycan (PG) had numerous holes. While these phenomena are similar to the findings for the ΔmlaEΔnlpI of K12, there were more PG holes in the ΔmlaEΔnlpI of EcN than the K12 strain, which were observed not only at the tip of the long axis but also in the whole PG structure. Further analysis clarified that the viability of ΔmlaEΔnlpI of EcN decreased compared with that of the wild-type. Although the amount of PG in ΔmlaEΔnlpI cells was about half of that in wild-type, the components of amino acids in PG did not change in ΔmlaEΔnlpI. Although the viability decreased compared to the wild-type, the ΔmlaEΔnlpI grew in normal culture conditions. The hypervesiculation strain constructed here is expected to be used as an enhanced probiotic strain.
Subject(s)
Escherichia coli Proteins , Probiotics , Escherichia coli/metabolism , Escherichia coli Proteins/genetics , Cell Wall/metabolism , Probiotics/metabolismABSTRACT
INTRODUCTION: A previous study demonstrated a strong emulsification ability of the culture supernatant obtained by cultivation of Candida albicans in a medium containing a ß-1,3-glucan synthesis inhibitor and proposed a novel screening method using emulsification as an indicator for ß-1,3-glucan synthesis inhibition (Nerome et al., 2021. Evaluating ß-1,3-glucan synthesis inhibition using emulsion formation as an indicator. J Microbiol Methods. 190:106327). The emulsification was presumed to be caused by the proteins released from the cells; however, which proteins have a strong emulsification ability was unclear. Furthermore, as many cell wall proteins are connected to ß-1,3-glucan via the carbohydrate moiety of the glycosylphosphatidylinositol (GPI)-anchor, which remains when detached from the cell membrane, emulsification might be detected by inhibiting GPI-anchor synthesis. OBJECTIVE: This study aimed to confirm whether emulsification could be detected by inhibiting GPI-anchor synthesis and identifying emulsification proteins released by inhibiting the synthesis of GPI-anchor or ß-1,3-glucan. METHODS: C. albicans was cultured in a medium containing a GPI-anchor synthesis inhibitor, and the emulsification by the culture supernatant was evaluated. We identified cell wall proteins released from the cells upon inhibition of ß-1,3-glucan or GPI-anchor synthesis by mass spectrometry, their recombinant proteins were prepared, and their emulsification efficacy was evaluated. RESULTS: In GPI-anchor synthesis inhibition, a weak emulsification phenomenon was observed compared to the ß-1,3-glucan synthesis inhibition. Phr2 protein was released from the cells upon GPI-anchor synthesis inhibition, and recombinant Phr2 showed a strong emulsification activity. Phr2 and Fba1 proteins were released upon ß-1,3-glucan synthesis inhibition, and recombinant Fba1 showed a strong emulsification activity. CONCLUSIONS: We concluded that the emulsion phenomenon could be used to screen ß-1,3-glucan and GPI-anchor synthesis inhibitors. Also, the two kinds of inhibitors could be distinguished by differences in the growth recovery by osmotic support and strength of emulsification. In addition, we identified the proteins involved in emulsification.
Subject(s)
Candida albicans , Saccharomyces cerevisiae Proteins , Glucans/metabolism , Glycosylphosphatidylinositols/metabolism , Emulsions/metabolism , Saccharomyces cerevisiae Proteins/metabolismABSTRACT
PHO-mutant strains of Saccharomyces cerevisiae, NOF-1 and NBD82-1, which constitutively express PHO81 and PHO4, respectively, have been reported to accumulate phosphate in high-phosphate conditions. However, detailed analysis, including a quantitative evaluation of the accumulated phosphate, has not been performed for these mutants. In this study, NOF-1 and NBD82-1 mutant and double mutant strains were cultured in a high-phosphate medium to quantitatively analyze the amount, accumulation form, and physiological use of the accumulated phosphate in the cells. In control strains (BY4741 and NBW7), the percentage of phosphorus in total dry weight of cell was approximately 2%TDW; for the NBD82-1 mutant and double mutant strains, it was approximately 6%TDW; and for strain NOF-1, it was 8.5%TDW. When cells of the mutant strains were stained with 4',6-diamidino-2-phenylindole (DAPI), they showed a fluorescence peak at 540 nm, suggesting that phosphate accumulated as polyphosphoric acid (polyP). Quantitative evaluation revealed that for strain NOF-1, the percentage of phosphorus exiting as polyP in total dry weight of cell was approximately 5.0%TDW, equivalent to 60% of the total phosphorus in the cells. We also demonstrated that the mutant strains could grow well in phosphate-free medium, suggesting that phosphate accumulated in the cells was used as a phosphorus source. This is the first report concerning the quantitative analysis of phosphate accumulation and utilization of PHO regulatory system-mutant strains of Saccharomyces cerevisiae.
Subject(s)
Saccharomyces cerevisiae Proteins , Saccharomyces cerevisiae , Saccharomyces cerevisiae/genetics , Phosphates , Saccharomyces cerevisiae Proteins/genetics , PhosphorusABSTRACT
Toyocamycin (TM) is an adenosine-analog antibiotic isolated from Streptomyces toyocaensis. It inhibits Candida albicans, several plant fungal pathogens, and human cells, but many fungi, including Saccharomyces cerevisiae, are much less susceptible to TM. Aiming to clarify why TM and its analogs tubercidin and 5-iodotubercidin are active against C. albicans but not S. cerevisiae, this study focused on the absence of purine nucleoside transport activity from S. cerevisiae. When the concentrative nucleoside transporter (CNT) of C. albicans was expressed in S. cerevisiae, the recombinant strain became sensitive to TM and its analogs. The expression of C. albicans purine nucleoside permease in S. cerevisiae did not result in sensitivity to TM. Clustered regularly interspaced short palindromic repeat-mediated disruption of CNT was performed in C. albicans. The CNTΔ strain of C. albicans became insensitive to TM and its analogs. These data suggest that the toxicity of TM and its analogs toward C. albicans results from their transport via CNT. Interestingly, S. cerevisiae also became sensitive to TM and its analogs if human CNT3 was introduced into cells. These findings enhance our understanding of the mechanisms of action of adenosine analogs toward Candida pathogens and human cells. IMPORTANCE We investigated the mechanism of toxicity of TM and its analogs to C. albicans. Inspired by the effect of the copresence of TM and purine nucleosides on cell growth of C. albicans, we investigated the involvement of CNT in the toxicity mechanism by expressing CNT of C. albicans (CaCNT) in S. cerevisiae and deleting CaCNT in C. albicans. Our examinations clearly demonstrated that CaCNT is responsible for the toxicity of TM to C. albicans. S. cerevisiae expressing the human ortholog of CaCNT also became sensitive to TM and its analogs, and the order of effects of the TM analogs was a little different between CaCNT- and hCNT3-expressing S. cerevisiae. These findings are beneficial for an understanding of the mechanisms of action of adenosine analogs toward Candida pathogens and human cells and also the development of new antifungal drugs.
Subject(s)
Candida albicans , Nucleoside Transport Proteins , Adenosine/metabolism , Candida albicans/genetics , Candida albicans/metabolism , Humans , Nucleoside Transport Proteins/genetics , Nucleoside Transport Proteins/metabolism , Purine Nucleosides/metabolism , Saccharomyces cerevisiae/genetics , Saccharomyces cerevisiae/metabolism , Toyocamycin/metabolismABSTRACT
INTRODUCTION: The cell wall ß-1,3-glucan of fungal pathogen Candida albicans is an attractive antifungal target. ß-1,3-Glucan is the skeletal structure in the cell wall and the major scaffold for cell wall proteins. In previous studies using Saccharomyces cerevisiae, strong emulsification was detected by mixing cell wall proteins with oil. To date, there have been no reports of applying an emulsification phenomenon to assessing ß-1,3-glucan synthesis inhibition. OBJECTIVE: The aim of this study was to clarify that emulsification is useful as an indicator for evaluating ß-1,3-glucan synthesis inhibition in C. albicans. METHODS: At first, whether cell wall proteins released from cells by ß-1,3-glucanase treatment worked as an effective emulsifier in C. albicans was examined. Next, whether emulsification occurred even in the culture supernatant brought about by treating with bioactive compounds, including ß-1,3-glucan synthesis inhibitors, under osmotic protection was investigated. In addition, the release of cell wall proteins into the culture medium by treating with those compounds was examined. Finally, a simpler evaluation method using emulsion formation was examined for application to screening of inhibitors. RESULTS: Emulsification occurred by cell wall proteins obtained by treating with ß-1,3-glucanase in C. albicans. In addition, cell wall proteins were released into the culture medium by treating with ß-1,3-glucan synthesis inhibitors, resulting in emulsification. However, such phenomena were not observed in the case of other bioactive compounds. Furthermore, emulsification could be detected in the culture broth obtained by static culture on a small scale. CONCLUSIONS: The obtained results strongly implied that emulsification results from decreased ß-1,3-glucan levels in the cell wall. As emulsification can be simply evaluated by mixing the culture broth with oil, in the future application to the initial assessment and screening of ß-1,3-glucan synthesis inhibitors is expected.
Subject(s)
Candida albicans/metabolism , Cell Wall/metabolism , Fungal Proteins/metabolism , Glucan 1,3-beta-Glucosidase/metabolism , beta-Glucans/metabolism , Antifungal Agents/pharmacology , Candida albicans/drug effects , Caspofungin/pharmacology , Cell Wall/drug effects , Emulsions/metabolism , Glucan 1,3-beta-Glucosidase/antagonists & inhibitors , Micafungin/pharmacologyABSTRACT
Escherichia coli produces extracellular vesicles called outer membrane vesicles (OMVs) by releasing a part of its outer membrane. We previously reported that the combined deletion of nlpI and mlaE, related to envelope structure and phospholipid accumulation in the outer leaflet of the outer membrane, respectively, resulted in the synergistic increase of OMV production. In this study, the analysis of ΔmlaEΔnlpI cells using quick-freeze, deep-etch electron microscopy (QFDE-EM) revealed that plasmolysis occurred at the tip of the long axis in cells and that OMVs formed from this tip. Plasmolysis was also observed in the single-gene knockout mutants ΔnlpI and ΔmlaE. This study has demonstrated that plasmolysis was induced in the hypervesiculating mutant E. coli cells. Furthermore, intracellular vesicles and multilamellar OMV were observed in the ΔmlaEΔnlpI cells. Meanwhile, the secretion of recombinant green fluorescent protein (GFP) expressed in the cytosol of the ΔmlaEΔnlpI cells was more than 100 times higher than that of WT and ΔnlpI, and about 50 times higher than that of ΔmlaE in the OMV fraction, suggesting that cytosolic components were incorporated into outer-inner membrane vesicles (OIMVs) and released into the extracellular space. Additionally, QFDE-EM analysis revealed that ΔmlaEΔnlpI sacculi contained many holes noticeably larger than the mean radius of the peptidoglycan (PG) pores in wild-type (WT) E. coli. These results suggest that in ΔmlaEΔnlpI cells, cytoplasmic membrane materials protrude into the periplasmic space through the peptidoglycan holes and are released as OIMVs.
ABSTRACT
Flocculation is an aggregation phenomenon of microbial cells in which they form flocs or flakes. In this study, it was found that addition of glycerol to a complex glucose medium promoted spontaneous floc formation by an Escherichia coli degP-deficient mutant strain (ΔdegP) in a dose-dependent manner. In the presence of 10% (v/v) glycerol, the amount of floc formation (quantified as floc protein) reached its maximum value (230 mg/L), five times that in its absence. 10% (v/v) glycerol was the limit concentration that does not inhibit cell growth of ΔdegP strain. Glycerol was not consumed by ΔdegP cells during floc formation. To provide media having nearly the same viscosity as that containing 10% (v/v) glycerol, carboxymethyl cellulose (CMC) or polyvinylpyrrolidone (PVP) were added to medium as viscosifying agents. Floc formation was not promoted by increasing the medium viscosity with CMC or PVP. However, addition of ethylene glycol also significantly promoted floc formation in the same manner as glycerol. Addition of short-chain polyols decreased the number of viable ΔdegP cells in the floc structure and enhanced outer membrane vesicle (OMV) production by ΔdegP cells; polyols-induced damage on the outer membrane of ΔdegP cells may contribute to the promoted floc formation.
Subject(s)
Escherichia coli/cytology , Escherichia coli/drug effects , Glycerol/pharmacology , Heat-Shock Proteins/deficiency , Serine Endopeptidases/deficiency , Flocculation/drug effects , Periplasmic ProteinsABSTRACT
We found the mineralization of Cu during long-term Cu2+ adsorption onto dry baker's yeast cells phosphorylated using sodium cyclo-triphosphate. Field emission scanning electron microscopy (FESEM) with energy-dispersive X-ray spectroscopy confirmed that the elemental composition of minerals were copper, phosphorus, and oxygen. Synchrotron-based X-ray absorption fine structure showed that the local structure around Cu atoms deposited on the mineral was almost identical to that of commercial copper (II) phosphate Cu3(PO4)2â3H2O. However, the crystallinity was low, and the structure was slightly distorted. Time profile analysis using FESEM revealed that copper phosphate mineralization was first apparent on Day 3 of adsorption, whereas mineral formation plateaued at around Day 7. It seems that mineralization occurs by the local saturation of phosphate and Cu2+ on the yeast cells. Mineralization of the rare earth ion Dy3+ was also demonstrated during long-term adsorption. Mineralization on phosphorylated yeast cells appears to follow a common path for various types of metal ions and provides a promising technique for metal recovery via irreversible adsorption.
Subject(s)
Copper/pharmacology , Saccharomyces cerevisiae/drug effects , Adsorption , Crystallization , Desiccation , Oxygen/metabolism , Phosphorus/metabolism , Saccharomyces cerevisiae/metabolism , Saccharomyces cerevisiae/ultrastructureABSTRACT
A previous study revealed that Saccharomyces cerevisiae mcd4Δ, a cell wall mutant with a defect in the synthesis of the glycosylphosphatidylinositol anchor, has a strong macrophage activation ability. In this study, remarkable emulsion formation after cell suspensions of mcd4Δ and anp1Δ (which exhibit an extreme reduction of mannan) were mixed with oil was found. Moreover, the relationship between cell wall mutation and emulsion formation was investigated, suggesting that och1Δ with a defect in the formation of N-linked glycans also had a strong emulsification ability and that high molecular weight materials released from the cells were involved in emulsion formation. Furthermore, two strains (asc1Δ and scp160Δ) with a strong emulsification ability without a large decrease in mannan content were also found from the wide screening of strains that exhibit an emulsifying activity using more than 5000 gene-deficient strains. These results provide valuable information for the development of a yeast-derived emulsifier.
Subject(s)
Cell Membrane/chemistry , Cell Wall/chemistry , Emulsifying Agents/chemistry , Saccharomyces cerevisiae/chemistry , Saccharomyces cerevisiae/genetics , Animals , Cell Membrane/genetics , Cell Membrane/metabolism , Cell Wall/genetics , Emulsions/chemistry , Glucose/metabolism , Macrophage Activation , Mannans/metabolism , Mannose/metabolism , Mice , Mutation , Polysaccharides/chemistry , RAW 264.7 Cells , Saccharomyces cerevisiae/cytology , Saccharomyces cerevisiae/metabolism , Saccharomyces cerevisiae Proteins/genetics , Saccharomyces cerevisiae Proteins/metabolismABSTRACT
Outer membrane vesicles (OMVs) are extracellular vesicles released from the surface of Gram-negative bacteria, including Escherichia coli. Several gene-deficient mutants relating to envelope stress (nlpI and degP) and phospholipid accumulation in the outer leaflet of the outer membrane (mlaA and mlaE) increase OMV production. This study examined the combinatorial deletion of these genes in E. coli and its effect on OMV production. The nlpI and mlaE double-gene-knockout mutant (ΔmlaEΔnlpI) showed the highest OMV production. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis-based quantitative analysis showed that OMV production by strain ΔmlaEΔnlpI was ~30 times that by the wild-type (WT). In addition, to evaluate the protein secretion capacity of OMVs, a green fluorescent protein (GFP) fused with outer membrane protein W (OmpW) was expressed in OMVs. Western blot analysis showed that GFP secretion through OMVs reached 3.3 mg/L in the culture medium of strain ΔmlaEΔnlpI/gfp, 500 times that for the WT. Our approach using OMVs for extracellular protein secretion in E. coli is an entirely new concept compared with existing secretion systems.
Subject(s)
Bacterial Outer Membrane Proteins , Escherichia coli Proteins , Escherichia coli , Recombinant Proteins , Secretory Vesicles , Bacterial Outer Membrane/metabolism , Bacterial Outer Membrane Proteins/genetics , Bacterial Outer Membrane Proteins/metabolism , Escherichia coli/genetics , Escherichia coli/metabolism , Escherichia coli Proteins/genetics , Escherichia coli Proteins/metabolism , Gene Knockout Techniques , Lipoproteins/genetics , Lipoproteins/metabolism , Recombinant Proteins/genetics , Recombinant Proteins/metabolism , Secretory Vesicles/genetics , Secretory Vesicles/metabolismABSTRACT
The effect of central metabolic activity of Escherichia coli cells acting as biocatalysts on the performance of microbial fuel cells (MFCs) was studied with glucose used as the energy source. Milliliter-scale two-chambered MFCs were used with 2-hydroxy-1,4-naphthoquinone (HNQ) as an electron mediator. Among the single-gene deletions examined, frdA, pdhR, ldhA, and adhE increased the average power output of the constructed MFC. Next, multiple-gene knockout mutants were constructed using P1 transduction. The Δ5 (ΔfrdAΔpdhRΔldhAΔadhEΔpta) strain showed the highest ave. power output (1.82 mW) and coulombic efficiency (21.3%). Our results show that the combination of multiple-gene knockout in E. coli cells leads to the development of an excellent catalyst for MFCs. Finally, preventing a decrease in the pH of the anodic solution was a key factor for improving the power output of the Δ5 strain, and a maximum ave. power output of 2.21 mW was achieved with 5% NaHCO3 in the buffer. The ave. power density of the constructed MFC was 0.27 mW/cm3, which is comparable to an enzymatic fuel cell of a Milliliter-scale using glucose dehydrogenase.
Subject(s)
Bioelectric Energy Sources/microbiology , Escherichia coli , Gene Knockout Techniques , Genes, Bacterial , Metabolic Engineering , Escherichia coli/genetics , Escherichia coli/metabolismABSTRACT
Poly-gamma-glutamic acid (γ-PGA) is a water-soluble, nontoxic biocompatible polymer, which is extensively used in medicines, foodstuffs, cosmetics, and in water treatment. We previously isolated a novel γ-PGA producing strain Bacillus licheniformis RK14 from soil and developed a hyper-producing mutant strain RK14-46 by an ethyl methanesulfonate (EMS) treatment. In this study, endo-type (pgdS) and exo-type γ-PGA hydrolases (ggt) were disrupted by integrating plasmids into the genomic DNA of B. licheniformis RK14-46 strain. Unexpectedly, we observed strong inhibition of γ-PGA production following deletion of the pgdS gene, suggesting that pgdS is essential for γ-PGA biosynthesis in strain RK14-46, and in its parent strain RK14. In contrast, γ-PGA production increased by the deletion of the ggt gene and reached 39â¯g/L in the presence of 90â¯g/L glucose and elevated oxygen supply. Furthermore, γ-PGA from the ggt-disrupted mutant (Δggt) maintained a larger molecular mass throughout the culture period, whereas that from the original RK14-46 strain had degraded after glucose consumption. γ-PGA-containing culture supernatants from Δggt strain showed greater flocculation efficiency in sewage sludge than supernatants from the RK14-46 strain, reflecting greater production of γ-PGA with larger molecular mass by the Δggt strain. This is the first report concerning the deletion of pgdS and ggt genes in B. licheniformis strain and the properties of γ-PGA obtained from the mutant strain.
Subject(s)
Bacillus licheniformis/growth & development , Hydrolases/genetics , Polyglutamic Acid/analogs & derivatives , Bacillus licheniformis/drug effects , Bacillus licheniformis/isolation & purification , Bacillus licheniformis/metabolism , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Biodegradation, Environmental , Gene Knockout Techniques , Glucose/metabolism , Hydrolases/metabolism , Oxygen/metabolism , Polyglutamic Acid/metabolism , Soil Microbiology , Wastewater/microbiologyABSTRACT
Biosorption is a cost-effective and simple technique for removing heavy metals and rare earth elements from aqueous solution. Here, metals were recovered from aqueous solutions using phosphorylated dry baker's yeast cells. The cells were phosphorylated using cyclo-triphosphate, Na3P3O9. The total P content of the phosphorylated cells was ~1.0 mmol/g dry cell weight (DCW). The zeta potential of the phosphorylated cells was -45 mV, two times higher than for the non-phosphorylated cells. The strong negative charges of the phosphorylated cells allowed the cells to adsorb heavy metal ions such as Cd2+, Cu2+, Pb2+, and Zn2+, the adsorption capacities of which reached ~1.0 mmol/g DCW. This adsorption capacity was the highest level found in the previous studies using yeast dead biomass. The adsorbed metal ions were easily desorbed in 0.1 M HCl. The phosphorylated cells also adsorbed rare earth ions including Ce3+, Dy3+, Gd3+, La3+, Nd3+, Y3+, and Yb3+ with high efficiency. Furthermore, the phosphorylated yeast cells selectively adsorbed the rare earth ions (Nd3+ and Yb3+) from a solution containing heavy metals and rare earth ions because trivalent positively charged ions were adsorbed preferentially over divalent ions. Thus, phosphorylated yeast cells therefore have great potential for use as novel bioadsorbents. It is also expected that this technique can be applied to many microbial materials as well as yeast.
Subject(s)
Adsorption , Metals/isolation & purification , Saccharomyces cerevisiae/metabolism , Solutions/chemistry , PhosphorylationABSTRACT
The present article reviews several approaches for inducing flocculation of Escherichia coli cells. The common industrially used bacterium E. coli does not naturally have floc-forming ability. However, there are several approaches to induce flocculation of E. coli cells. One is induction by flocculants-polyvalent inorganic salts, synthetic polymeric flocculants, or bio-based polymeric materials, including polysaccharide derivatives. Another method is the induction of spontaneous flocculation by changing the phenotypes of E. coli cells; several studies have shown that physical treatment or gene modification can endow E. coli cells with floc-forming ability. Coculturing E. coli with other microbes is another approach to induce E. coli flocculation. These approaches have particular advantages and disadvantages, and remain open to clarification of the flocculation mechanisms and improvement of the induction processes. In this review, several approaches to the induction of E. coli flocculation are summarized and discussed. This review will be a useful guide for the future development of methods for the flocculation of non-floc-forming microorganisms.
Subject(s)
Bacterial Physiological Phenomena , Escherichia coli/physiology , Coculture Techniques , Flocculation , Phenotype , Polymers/chemistry , Polysaccharides/metabolismABSTRACT
Outer membrane vesicles (OMVs) are spherical bilayered proteolipids released from the cell surfaces of bacteria, which have gained traction in the biotechnology fields. Bacterial cellular machinery can be genetically engineered to produce and package heterologous enzymes into OMVs, producing nanocarriers and nanoparticle catalysts. However, the productivity or efficiency of packaging the target protein into OMVs has not been quantitatively evaluated. In this study, we packaged green fluorescence protein (GFP) into the OMVs of Escherichia coli through N-terminal fused expression to outer membrane protein W (OmpW). The OMV productivity and amount of OmpW-GFP packaged in the OMVs were quantitatively compared between two hypervesiculating mutant strains ΔnlpI and ΔdegP. Both strains increased the OMV production, but the ΔnlpI strain additionally enhanced the packaging of OmpW-GFP into OMVs. It was further confirmed that Spr, a peptidoglycan endopeptidase, plays an important role in the enhanced packaging of OmpW-GFP into OMVs through the increased OmpW-GFP expression on the ΔnlpI cells. Finally, the amount of OmpW-GFP released in the OMV fraction of both mutants was determined in terms of the OMV productivity and the packaging efficiency of OmpW-GFP into OMVs. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:51-57, 2018.
Subject(s)
Biotechnology , Escherichia coli Proteins/chemistry , Recombinant Proteins/chemistry , Cell Membrane/chemistry , Cell Membrane/genetics , Escherichia coli/chemistry , Escherichia coli/genetics , Escherichia coli Proteins/genetics , Green Fluorescent Proteins/chemistry , Recombinant Proteins/geneticsABSTRACT
The utility of engineering flocculation is wildly recognized in applied and environmental microbiology. We previously reported self-produced flocculation of Escherichia coli cells by overexpressing the native bcsB gene that encodes a component of the cellulose synthesis pathway. Further experiments clarified that the spontaneous E. coli flocs were proteinous, and elongation factor Ts (Tsf) was the main component. In this study, we demonstrated successful expression of a fusion protein consisting of Tsf and green fluorescence protein (GFP) on E. coli flocs. Interestingly, the percentage of Tsf-GFP in total floc protein reached approximately 15% (w/w). The proposed design of a fusion protein with Tsf enables displaying a recombinant target protein on the floc structure.
Subject(s)
Escherichia coli K12/metabolism , Escherichia coli Proteins/metabolism , Peptide Elongation Factors/metabolism , Recombinant Fusion Proteins/metabolism , Bacteriological Techniques , Bioengineering , Escherichia coli K12/cytology , Escherichia coli K12/genetics , Escherichia coli Proteins/genetics , Flocculation , Green Fluorescent Proteins/genetics , Green Fluorescent Proteins/metabolism , Peptide Elongation Factors/genetics , Recombinant Fusion Proteins/geneticsABSTRACT
The increasing application of regenerative medicine has generated a growing demand for stem cells and their derivatives. Single-use bioreactors offer an attractive platform for stem cell expansion owing to their scalability for large-scale production and feasibility of meeting clinical-grade standards. The current work evaluated the capacity of a single-use bioreactor system (1 L working volume) for expanding Meg01 cells, a megakaryocytic (MK) progenitor cell line. Oxygen supply was provided by surface aeration to minimize foaming and orbital shaking was used to promote oxygen transfer. Oxygen transfer rates (kL a) of shaking speeds 50, 100, and 125 rpm were estimated to be 0.39, 1.12, and 10.45 h-1 , respectively. Shaking speed was a critical factor for optimizing cell growth. At 50 rpm, Meg01 cells exhibited restricted growth due to insufficient mixing. A negative effect occurred when the shaking speed was increased to 125 rpm, likely caused by high hydrodynamic shear stress. The bioreactor culture achieved the highest growth profile when shaken at 100 rpm, achieving a total expansion rate up to 5.7-fold with a total cell number of 1.2 ± 0.2 × 109 cells L-1 . In addition, cells expanded using the bioreactor system could maintain their potency to differentiate following the MK lineage, as analyzed from specific surface protein and morphological similarity with the cells grown in the conventional culturing system. Our study reports the impact of operational variables such as shaking speed for growth profile and MK differentiation potential of a progenitor cell line in a single-use bioreactor. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:362-369, 2018.
Subject(s)
Bioreactors , Cell Culture Techniques/instrumentation , Cell Culture Techniques/methods , Leukemia, Megakaryoblastic, Acute/pathology , Carbon/metabolism , Cell Differentiation , Cell Line, Tumor , Equipment Design , Humans , Leukemia, Megakaryoblastic, Acute/metabolism , Oxygen/metabolism , Stem Cells/cytologyABSTRACT
We isolated a Shewanella sp. T3-3 bacterium that yielded highly active alkaline phosphatase (APase). We then cloned the APase gene from Shewanella sp. T3-3 (T3-3AP), and expressed and purified the enzyme from Escherichia coli. Recombinant T3-3AP showed high comparative reactivity on colorimetric (pNPP) and luminescent substrates (PPD and ASP-5). Subsequently, we improved the residual activity after maleimide activation by introducing amino acid substitutions of two Lys residues that were located near the active site. The double mutant enzyme (K161S + K184S) showed much higher residual specific activity after maleimide activation than the wild type enzyme, and had approximately twofold increased sensitivity on sandwich enzyme linked immunosorbent assays (ELISA) compared with calf intestinal APase (CIAP), which is routinely used as a labeling enzyme for ELISA.
Subject(s)
Alkaline Phosphatase/genetics , Alkaline Phosphatase/metabolism , Shewanella/enzymology , Shewanella/genetics , Escherichia coli/genetics , Gene Expression , Kinetics , Recombinant Proteins/genetics , Recombinant Proteins/metabolism , Substrate SpecificityABSTRACT
Shewanella oneidensis is a Gram-negative facultative anaerobe that can use a wide variety of terminal electron acceptors for anaerobic respiration. In this study, S. oneidensis degQ gene, encoding a putative periplasmic serine protease, was cloned and expressed. The activity of purified DegQ was inhibited by diisopropyl fluorophosphate, a typical serine protease-specific inhibitor, indicating that DegQ is a serine protease. In-frame deletion and subsequent complementation of the degQ were carried out to examine the effect of envelope stress on the production of outer membrane vesicles (OMVs). Analysis of periplasmic proteins from the resulting S. oneidensis strain showed that deletion of degQ induced protein accumulation and resulted in a significant decrease in protease activity within the periplasmic space. OMVs from the wild-type and mutant strains were purified and observed by transmission electron microscopy. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of the OMVs showed a prominent band at ~37 kDa. Nanoliquid chromatography-tandem mass spectrometry analysis identified three outer membrane porins (SO3896, SO1821, and SO3545) as dominant components of the band, suggesting that these proteins could be used as indices for comparing OMV production by S. oneidensis strains. Quantitative evaluation showed that degQ-deficient cells had a fivefold increase in OMV production compared with wild-type cells. Thus, the increased OMV production following the deletion of DegQ in S. oneidensis may be responsible for the increase in envelope stress.