Comparison of the Rate of Concomitant Proximal Venous Stenosis between the Upper and Lower Extremities in Patients with Secondary Lymphedema Undergoing Lymphatico-venous Anastomosis.

BACKGROUND: Concomitant iatrogenic proximal venous stenosis increases venous pressure and can be a risk factor for unfavorable outcomes of lymphaticovenular anastomosis (LVA) in extremities with secondary lymphedema. This study investigated the frequency and relevant factors of venous stenosis in patients diagnosed with secondary lymphedema who underwent LVA. METHODS: Patients who underwent preoperative computed tomographic venography (CTV) and LVA for secondary lymphedema of the extremities from October 2018 to March 2022 were included. The incidence of proximal venous stenosis in the affected limb on preoperative CTV and the rate of endovascular intervention were compared between upper and lower extremities. Factors affecting proximal venous stenosis were identified through multivariable analysis using independent variables, including patient age, body mass index, comorbidities, smoking history, radiation therapy, duration of lymphedema, and location of lymphedema. RESULTS: A total of 211 patients were analyzed, including 83 patients with upper extremity and 128 patients with lower extremity lymphedema. The incidence of proximal venous stenosis in the preoperative CTV was 32.5% and 7.8% in upper extremity, and lower extremity lymphedema, respectively (p < 0.001). The incidence of venous stenosis requiring endovascular intervention was significantly higher in the upper extremity compared to the lower extremity (16.9 % vs. 6.3 %, p = 0.014). In multivariable analysis, risk factors affecting incidence of venous stenosis requiring endovascular intervention was the patient age (p = 0.007) and upper extremity (p = 0.009). CONCLUSIONS: Preoperative evaluation and treatment of venous stenosis in extremities with secondary lymphedema are necessary before LVA surgery, particularly in upper extremity lymphedema.

Association of serum creatinine trajectories with one-year mortality after valvular heart surgery: a retrospective cohort study.

BACKGROUND: Acute renal dysfunction is defined by the maximum increase in serum creatinine (sCr) without considering the pattern of change in sCr. We aimed to identify longitudinal patterns (trajectories) of postoperative sCr concentrations and investigate their association with long-term outcomes in patients undergoing valvular heart surgery. MATERIALS AND METHODS: In this retrospective review of 3,436 patients who underwent valvular heart surgery, we applied trajectory projection cluster analysis to identify the trajectories of sCr changes from baseline during the seven postoperative days. Primary and secondary endpoints were to investigate the associations of sCr trajectories with mortality using Kaplan-Meier curves and Cox proportional hazards regression analysis, and a composite of major adverse kidney events (MAKEs) at one year after surgery, respectively. RESULTS: Four clusters were identified: Clusters 1 and 2, a minimal change in sCr (90.1% of patients); Cluster 3, a significant and persistent increase in sCr (4.1% of patients); and Cluster 4, a significant but transient increase in sCr (5.8% of patients). The one-year postoperative mortality rate was higher in Cluster 3 (18.4%) and Cluster 4 (11.6%) than in Cluster 1+2 (2.7%). The Kaplan-Meier survival curve demonstrated significant differences in mortality rates among the clusters (log-rank test, P<0.001). In the multivariable Cox analysis, the sCr trajectory cluster was an independent prognostic factor for mortality. Cluster 3 had a higher prevalence of MAKEs (37.6%) compared with Cluster 1+2 (6.8%, P<0.001) and Cluster 4 (24.1%, P=0.045). The cluster was an independent prognostic factor for MAKEs. CONCLUSION: The sCr trajectory clusters exhibited significantly different risks of mortality and MAKEs at one year after surgery. Through these sCr trajectories, we confirmed that both the extent of sCr increase and its sustainability during the first seven postoperative days were closely associated with the long-term prognosis after valvular heart surgery.

Deep learning for predicting rehospitalization in acute heart failure: Model foundation and external validation.

AIMS: Assessing the risk for HF rehospitalization is important for managing and treating patients with HF. To address this need, various risk prediction models have been developed. However, none of them used deep learning methods with real-world data. This study aimed to develop a deep learning-based prediction model for HF rehospitalization within 30, 90, and 365 days after acute HF (AHF) discharge. METHODS AND RESULTS: We analysed the data of patients admitted due to AHF between January 2014 and January 2019 in a tertiary hospital. In performing deep learning-based predictive algorithms for HF rehospitalization, we use hyperbolic tangent activation layers followed by recurrent layers with gated recurrent units. To assess the readmission prediction, we used the AUC, precision, recall, specificity, and F1 measure. We applied the Shapley value to identify which features contributed to HF readmission. Twenty-two prognostic features exhibiting statistically significant associations with HF rehospitalization were identified, consisting of 6 time-independent and 16 time-dependent features. The AUC value shows moderate discrimination for predicting readmission within 30, 90, and 365 days of follow-up (FU) (AUC:0.63, 0.74, and 0.76, respectively). The features during the FU have a relatively higher contribution to HF rehospitalization than features from other time points. CONCLUSIONS: Our deep learning-based model using real-world data could provide valid predictions of HF rehospitalization in 1 year follow-up. It can be easily utilized to guide appropriate interventions or care strategies for patients with HF. The closed monitoring and blood test in daily clinics are important for assessing the risk of HF rehospitalization.

Automated Laryngeal Invasion Detector of Boluses in Videofluoroscopic Swallowing Study Videos Using Action Recognition-Based Networks.

We aimed to develop an automated detector that determines laryngeal invasion during swallowing. Laryngeal invasion, which causes significant clinical problems, is defined as two or more points on the penetration-aspiration scale (PAS). We applied two three-dimensional (3D) stream networks for action recognition in videofluoroscopic swallowing study (VFSS) videos. To detect laryngeal invasion (PAS 2 or higher scores) in VFSS videos, we employed two 3D stream networks for action recognition. To establish the robustness of our model, we compared its performance with those of various current image classification-based architectures. The proposed model achieved an accuracy of 92.10%. Precision, recall, and F1 scores for detecting laryngeal invasion (≥PAS 2) in VFSS videos were 0.9470 each. The accuracy of our model in identifying laryngeal invasion surpassed that of other updated image classification models (60.58% for ResNet101, 60.19% for Swin-Transformer, 63.33% for EfficientNet-B2, and 31.17% for HRNet-W32). Our model is the first automated detector of laryngeal invasion in VFSS videos based on video action recognition networks. Considering its high and balanced performance, it may serve as an effective screening tool before clinicians review VFSS videos, ultimately reducing the burden on clinicians.

The Optimal Lowest Instrumented Vertebra to Prevent the Distal Adding-On Phenomenon in Patients Undergoing Selective Thoracic Fusion for Adolescent Idiopathic Scoliosis with Lenke Type 1A and 1B Curves: Comparison of Nine Selection Criteria.

Background/Objectives: There is no solid consensus regarding which lowest instrumented vertebra (LIV) selection criterion is best to prevent distal adding-on (DA) after adolescent idiopathic scoliosis (AIS) surgery. This study aims to search out the LIV selection criteria in the literature and to compare the ability of each LIV selection criterion to prevent DA in patients with AIS. Methods: Patients who underwent thoracic fusion for AIS of Lenke type 1A or 1B were included in this study. Nine criteria for LIV selection were found in a literature review. For each patient, whether the postoperative actual location of LIV was met with the suggested locations of the LIV was assessed. The preventive ability of nine criteria against DA was evaluated using logistic regression analysis. The patients who met the LIV selection criteria but developed DA were investigated. Results: The study cohort consisted of 145 consecutive patients with a mean age of 14.8 years. The criteria of Suk (OR = 0.267), Parisini (OR = 0.230), Wang (OR = 0.289), and Qin (OR = 0.210) showed a significantly decreased risk of DA if the LIV selection criterion was chosen at each suggested landmark. As the additional levels were fused, there was no statistically significant benefit in further reducing the risk of DA. Among the patients who met each criterion, the incidence of DA was lower in criteria by Takahashi (5.9%), Qin (7.1%), and King (7.4%) than the others. Conclusions: Qin's criterion, using the substantially touching vertebra concept, has the highest preventive ability against DA development. Extending the instrumentation further distal to this suggested LIV criterion did not add further benefit.

Electromagnetic Interference Shielding and Joule Heating Properties of Flexible, Lightweight, and Hydrophobic MXene/Nickel-Coated Polyester Fabrics Manufactured by Dip-Dry Coating and Electroless Plating.

High-performance electromagnetic interference (EMI) shielding materials with high flexibility, low density, and hydrophobic surface are crucial for modern integrated electronics and telecommunication systems in advanced industries like aerospace, military, artificial intelligence, and wearable electronics. In this study, we present flexible and hydrophobic MXene/Ni-coated polyester (PET) fabrics featuring a double-layered structure, fabricated via a facile and scalable dip-dry coating process followed by electroless nickel plating. Increasing the dip-dry coating iterations up to 10 cycles boosts the MXene loading content (∼31 wt %) and electrical conductivity (∼86 S/cm) of MXene-coated PET fabrics, while maintaining constant porosity (∼95%). The addition of a Ni layer enhances hydrophobicity, achieving a high water contact angle of ∼114° compared to only MXene-coated PET fabrics (∼49°). Furthermore, the 30 µm thick MXene/Ni-coated PET fabric demonstrates superior electrical conductivity (∼113.8 S/cm) and EMI shielding effectiveness (∼35.7 dB at 8-12 GHz) compared to only MXene- or Ni-coated PET fabrics. The EMI shielding performance of the MXene/Ni-coated PET fabric remains more stable in an air environment than only MXene-coated fabrics due to the outer Ni layer with excellent hydrophobicity and oxidation stability. Additionally, the MXene/Ni-coated PET fabric exhibits impressive Joule heating performance, swiftly converting electrical energy into heat and reaching high steady-state temperatures (32-92 °C) at low applied voltages (0.5-1.5 V).

Predictive Value of Bolster Supine X-Ray for the Correction of Segmental Deformity After Thoracolumbar Fusion Surgery.

BACKGROUND AND OBJECTIVES: Assessment of thoracolumbar spine flexibility is crucial for determining which osteotomy to perform (posterior column osteotomy or 3-column osteotomy) to restore sagittal balance. Although preoperative bolster supine X-rays have been used to evaluate spine flexibility, their correlation with postoperative spinopelvic parameters has not been reported. We aimed to evaluate the predictive value of bolster X-ray for correcting sagittal deformities after thoracolumbar fusion surgery. METHODS: We retrospectively evaluated patients who underwent bolster supine radiography before posterior thoracolumbar fusion. Demographic data, operative records, and radiographic parameters were also recorded. The segmental Cobb angle, defined as the angle between the upper endplate of the uppermost and lower endplates of the lowest instrumented vertebrae, was compared between bolster and postoperative X-ray to evaluate the correlation between them. The predictive value of bolster X-ray for postoperative deformity correction was measured using intraclass correlation coefficients (ICC). RESULTS: Forty-two patients were included. The preoperative segmental Cobb angle (-1.4 ± 22.4) was significantly lower than the bolster segmental Cobb angle (23.2 ± 18.7, P < .001) and postoperative segmental Cobb angle (27.9 ± 22.3, P < .001); however, no significant difference was observed between the bolster and postoperative segmental Cobb angles (P = .746). Bolster X-ray showed a very strong correlation with postoperative X-ray (r = 0.950, P < .001) for segmental Cobb angle. Bolster supine X-ray had good-to-excellent reliability for postoperative X-ray with an ICC of 0.913 (95% CI, 0.760-0.962, P < .001) for the segmental Cobb angle. CONCLUSION: Bolster supine X-rays demonstrate good-to-excellent reliability with postoperative X-rays for segmental Cobb angles. These findings offer valuable insights into the selection of appropriate osteotomy techniques for clinical practice.

In vivo experimental study comparing alveolar ridge preservation versus guided bone regeneration after unassisted socket healing at intact and damaged sites in narrow alveolar ridges.

BACKGROUND: To compare bone regeneration and dimensional alteration of alveolar ridge at intact and damaged extraction sockets after alveolar ridge preservation (ARP) and implant placement versus unassisted socket healing followed by guided bone regeneration (GBR) with simultaneous implant placement. METHODS: In 6 beagle dogs, 3 types of extraction sockets in the mandible were created: (1) intact sockets, (2) 1-wall defect sockets and (3) 2-wall defect sockets. The sockets were allocated to undergo either (1) ARP and implant placement 8 weeks later (ARP group) or (2) GBR with simultaneous implant placement after 8 weeks of unassisted socket healing (GBR group). After an additional healing period of 8 weeks, bone regeneration and dimensional changes were evaluated radiographically and histologically. RESULTS: GBR showed superior bone formation and greater bone gains compared to ARP, regardless of the initial extraction-socket configuration. Although ARP maintained the preexisting alveolar ridge dimensions, peri-implant bone defects were still detected at 8 weeks of follow-up. Histomorphometric analyses confirmed that GBR increased dimensions of the alveolar ridge compared to baseline, and the augmentation and bone regeneration were greater with GBR than with ARP. CONCLUSION: Early implant placement with ARP can mitigate alveolar ridge changes in the narrow alveolar ridge. However, early implant placement with simultaneous GBR creates the conditions for enhanced bone regeneration around the implant and greater ridge augmentation compared to ARP, irrespective of the extraction-socket configuration.

Solar-Driven Sustainability: III-V Semiconductor for Green Energy Production Technologies.

Long-term societal prosperity depends on addressing the world's energy and environmental problems, and photocatalysis has emerged as a viable remedy. Improving the efficiency of photocatalytic processes is fundamentally achieved by optimizing the effective utilization of solar energy and enhancing the efficient separation of photogenerated charges. It has been demonstrated that the fabrication of III-V semiconductor-based photocatalysts is effective in increasing solar light absorption, long-term stability, large-scale production and promoting charge transfer. This focused review explores on the current developments in III-V semiconductor materials for solar-powered photocatalytic systems. The review explores on various subjects, including the advancement of III-V semiconductors, photocatalytic mechanisms, and their uses in H2 conversion, CO2 reduction, environmental remediation, and photocatalytic oxidation and reduction reactions. In order to design heterostructures, the review delves into basic concepts including solar light absorption and effective charge separation. It also highlights significant advancements in green energy systems for water splitting, emphasizing the significance of establishing eco-friendly systems for CO2 reduction and hydrogen production. The main purpose is to produce hydrogen through sustainable and ecologically friendly energy conversion. The review intends to foster the development of greener and more sustainable energy source by encouraging researchers and developers to focus on practical applications and advancements in solar-powered photocatalysis.

Continuous Template Growth of Large-Scale Tellurene Films on 1T'-MoTe2.

Use of a template triggers an epitaxial interaction with the depositing material during synthesis. Recent studies have demonstrated that two-dimensional tellurium (tellurene) can be directionally oriented when grown on transition metal dichalcogenide (TMD) templates. Specifically, employing a T-phase TMD, such as WTe2, restricts the growth direction even further due to its anisotropic nature, which allows for the synthesis of well-oriented tellurene films. Despite this, producing large-area epitaxial films still remains a significant challenge. Here, we report the continuous synthesis of a 1T'-MoTe2 template via chemical vapor deposition and tellurene via vapor transport. The interaction between helical Te and the 1T'-MoTe2 template facilitates the Te chains to collapse into ribbon shapes, enhancing lateral growth at a rate approximately 6 times higher than in the vertical direction, as confirmed by scanning electron microscopy and atomic force microscopy. Interestingly, despite the predominance of the lateral growth, cross-sectional transmission electron microscopy analysis of the tellurene ribbons revealed a consistent 60-degree incline at the edges. This suggests that the edges of the tellurene ribbons, where they contact the template surface, are favorable sites for additional Te absorption, which then stacks along the incline angle to expand. Furthermore, controlling the synthesis temperature, duration, and preheating time has facilitated the successful synthesis of tellurene films. The resultant tellurene exhibited hole mobility as high as ∼400 cm2/V s. After removing the underlying metallic template with plasma treatment, the film showed a current on/off ratio of ∼103. This ratio was confirmed by two-terminal field-effect transistor measurements and supported by near-field terahertz (THz) spectroscopy mapping.

Structure modeling-based characterization of ChnD, the 6-hydroxyhexanoate dehydrogenase from Acinetobacter sp. strain NCIMB 9871.

α,ω-Dicarboxylic acids, ω-aminoalkanoic acids, and α,ω-diaminoalkanes are valuable building blocks for the production of biopolyesters and biopolyamides. One of the key steps in producing these chemicals is the oxidation of ω-hydroxycarboxylic acids using alcohol dehydrogenases (e.g., ChnD of Acinetobacter sp. NCIMB 9871). However, the reaction and structural features of these enzymes remain mostly undiscovered. Thereby, we have investigated characteristics of ChnD based on enzyme kinetics, substrate-docking simulations, and mutation studies. Kinetic analysis revealed a distinct preference of ChnD for medium chain ω-hydroxycarboxylic acids, with the highest catalytic efficiency of 18.0 mM-1s-1 for 12-hydroxydodecanoic acid among C6 to C12 ω-hydroxycarboxylic acids. The high catalytic efficiency was attributed to the positive interactions between the carboxyl group of the substrates and the guanidino group of two arginine residues (i.e., Arg62 and Arg266) in the substrate binding site. The ChnD_R62L variant showed the increased efficiency and affinity, particularly for fatty alcohols (i.e., C6-C10) and branched-chain fatty alcohols, such as 3-methyl-2-buten-1-ol. Overall, this study contributes to the deeper understanding of medium-chain primary aliphatic alcohol dehydrogenases and their applications for the production of industrially relevant chemicals such as α,ω-dicarboxylic acids, ω-aminoalkanoic acids, and α,ω-diaminoalkanes from renewable biomass.

Poly(l-threonine-co-l-threonine Succinate) Thermogels for Sustained Release of Lixisenatide.

Negatively charged poly(l-Thr-co-l-Thr succinate) (PTTs) was developed as a new thermogel. Aqueous PTT solutions underwent thermogelation over a concentration range of 6.0-8.3 wt %. Dynamic light scattering, FTIR, 1H NMR, and COSY spectra revealed the partial strengthening of the ß-sheet conformation and the dehydration of PTTs during the transition. Extendin-4 was released from the PTTs thermogel with a large initial burst release, whereas positively charged lixisenatide significantly reduced its initial burst release to 25%, and up to 77% of the dose was released from the gel over 14 days. In vivo study revealed a high plasma concentration of lixisenatide over 5 days and hypoglycemic efficacy was observed for type II diabetic rats over 7-10 days. The biocompatible PTTs were degraded by subcutaneous enzymes. This study thus demonstrates an effective strategy for reducing the initial burst release of protein drugs from thermogels with the introduction of electrostatic interactions between the drug and the thermogel.

Comparison of Surgical Burden, Radiographic and Clinical Outcomes According to the Severity of Baseline Sagittal Imbalance in Adult Spinal Deformity Patients.

OBJECTIVE: To determine the clinical impact of the baseline sagittal imbalance severity in patients with adult spinal deformity (ASD). METHODS: We retrospectively reviewed patients who underwent ≥ 5-level fusion including the pelvis, for ASD with a ≥ 2-year follow-up. Using the Scoliosis Research Society-Schwab classification system, patients were classified into 3 groups according to the severity of the preoperative sagittal imbalance: mild, moderate, and severe. Postoperative clinical and radiographic results were compared among the 3 groups. RESULTS: A total of 259 patients were finally included. There were 42, 62, and 155 patients in the mild, moderate, and severe groups, respectively. The perioperative surgical burden was greatest in the severe group. Postoperatively, this group also showed the largest pelvic incidence minus lumbar lordosis mismatch, suggesting a tendency towards undercorrection. No statistically significant differences were observed in proximal junctional kyphosis, proximal junctional failure, or rod fractures among the groups. Visual analogue scale for back pain and Scoliosis Research Society-22 scores were similar across groups. However, severe group's last follow-up Oswestry Disability Index (ODI) scores significantly lower than those of the severe group. CONCLUSION: Patients with severe sagittal imbalance were treated with more invasive surgical methods along with increased the perioperative surgical burden. All patients exhibited significant radiological and clinical improvements after surgery. However, regarding ODI, the severe group demonstrated slightly worse clinical outcomes than the other groups, probably due to relatively higher proportion of undercorrection. Therefore, more rigorous correction is necessary to achieve optimal sagittal alignment specifically in patients with severe baseline sagittal imbalance.

Is it necessary to use a cervical brace after single- or double-level ACDF?

Although anterior cervical discectomy and fusion (ACDF) is one of the most frequently performed spinal surgeries, there is no consensus regarding the necessity of prescribing a cervical brace after surgery. This study aimed to investigate any difference in radiological and clinical outcomes when wearing or not wearing cervical braces after single- or double-level ACDF. We examined 2 cohorts of patients who underwent single- or double-level ACDF surgery with and without a cervical brace: patients who underwent ACDF between March 2018 and December 2019 received a cervical brace, while patients who underwent ACDF between January 2020 and May 2021 did not. Each patient was evaluated radiologically and functionally using plain X-ray, modified Japanese Orthopedic Association score, and visual analog scale for neck and arm until 12 months after surgery. Fusion rate, subsidence, and postoperative complications were also evaluated. Eighty-three patients were included in the analysis: 38 were braced and 45 were not. The demographic characteristics and baseline outcome measures of both groups were similar. There was no statistically significant difference in any of the clinical measures at baseline. The modified Japanese Orthopedic Association score and visual analog scale for neck and arm were similar in both groups at all time intervals and showed statistically significant improvement when compared with preoperative scores. In addition, fusion rate, subsidence, and postoperative complications were similar in both groups. Our results suggest that the use of cervical braces does not improve the clinical outcomes of individuals undergoing single- or double-level ACDF.

Innovations of metallic contacts on semiconducting 2D transition metal dichalcogenides toward advanced 3D-structured field-effect transistors.

2D semiconductors, represented by transition metal dichalcogenides (TMDs), have the potential to be alternative channel materials for advanced 3D field-effect transistors, such as gate-all-around field-effect-transistors (GAAFETs) and complementary field-effect-transistors (C-FETs), due to their inherent atomic thinness, moderate mobility, and short scaling lengths. However, 2D semiconductors encounter several technological challenges, especially the high contact resistance issue between 2D semiconductors and metals. This review provides a comprehensive overview of the high contact resistance issue in 2D semiconductors, including its physical background and the efforts to address it, with respect to their applicability to GAAFET structures.

Strain-graded quantum dots with spectrally pure, stable and polarized emission.

Structural deformation modifies the bandgap, exciton fine structure and phonon energy of semiconductors, providing an additional knob to control their optical properties. The impact can be exploited in colloidal semiconductor quantum dots (QDs), wherein structural stresses can be imposed in three dimensions while defect formation is suppressed by controlling surface growth kinetics. Yet, the control over the structural deformation of QDs free from optically active defects has not been reached. Here, we demonstrate strain-graded CdSe-ZnSe core-shell QDs with compositionally abrupt interface by the coherent pseudomorphic heteroepitaxy. Resulting QDs tolerate mutual elastic deformation of varying magnitudes at the interface with high structural fidelity, allowing for spectrally stable and pure emission of photons at accelerated rates with near unity luminescence efficiency. We capitalize on the asymmetric strain effect together with the quantum confinement effect to expand emission envelope of QDs spanning the entire visible region and exemplify their use in photonic applications.

Factors influencing psychological distress among breast cancer survivors using machine learning techniques.

Breast cancer is the most commonly diagnosed cancer among women worldwide. Breast cancer patients experience significant distress relating to their diagnosis and treatment. Managing this distress is critical for improving the lifespan and quality of life of breast cancer survivors. This study aimed to assess the level of distress in breast cancer survivors and analyze the variables that significantly affect distress using machine learning techniques. A survey was conducted with 641 adult breast cancer patients using the National Comprehensive Cancer Network Distress Thermometer tool. Participants identified various factors that caused distress. Five machine learning models were used to predict the classification of patients into mild and severe distress groups. The survey results indicated that 57.7% of the participants experienced severe distress. The top-three best-performing models indicated that depression, dealing with a partner, housing, work/school, and fatigue are the primary indicators. Among the emotional problems, depression, fear, worry, loss of interest in regular activities, and nervousness were determined as significant predictive factors. Therefore, machine learning models can be effectively applied to determine various factors influencing distress in breast cancer patients who have completed primary treatment, thereby identifying breast cancer patients who are vulnerable to distress in clinical settings.

Impact of Alternating-Current Operation on All-Inorganic Quantum Dot Light-Emitting Diodes.

In colloidal quantum dot light-emitting diodes (QD-LEDs), replacing organic hole transport layers (HTLs) with their inorganic counterparts is expected to yield distinct advantages due to their inherent material robustness. However, despite the promising characteristics of all-inorganic QD-LEDs, some challenges persist in achieving stable operation; for example, the electron overflow toward the inorganic HTL and charge accumulation within working devices return a temporal inconsistency in device characteristics. To address these challenges, we propose an operational approach that employs an alternating-current (AC) in all-inorganic QD-LEDs. We carry out comprehensive studies on the optoelectrical characteristics of all-inorganic QD-LEDs under direct-current (DC) or AC operation and demonstrate that AC operation can facilitate efficient charge carrier recombination within the QD emissive layer, leading to improved device efficiency and temporally invariant optoelectronic characteristics. Leveraging the intrinsic material robustness of inorganic charge transport layers (CTLs), our current study suggests a promising pathway toward enhancing the performance and stability of QD-LEDs, particularly for futuristic display applications.

Does an untreated peri-implant dehiscence defect affect the progression of peri-implantitis?: A preclinical in vivo experimental study.

OBJECTIVE: To investigate the early impact of plaque accumulation in a buccal dehiscence defect on peri-implant marginal bone resorption. MATERIALS AND METHODS: In six male Mongrel dogs, four dental implants were placed in the posterior maxilla on both sides (two implants per side). Based on the group allocation, each implant was randomly assigned to one of the following four groups to decide whether buccal dehiscence defect was prepared and whether silk ligation was applied at 8 weeks post-implant placement for peri-implantitis induction: UC (no defect without ligation); UD (defect without ligation); LC (no defect with ligation); and LD (defect with ligation) groups. Eight weeks after disease induction, the outcomes from radiographic and histologic analyses were statistically analyzed (p < .05). RESULTS: Based on radiographs, the exposed area of implant threads was smallest in group UC (p < .0083). Based on histology, both the distances from the implant platform to the first bone-to-implant contact point and to the bone crest were significantly longer in the LD group (p < .0083). In the UD group, some spontaneous bone fill occurred from the base of the defect at 8 weeks after implant placement. The apical extension of inflammatory cell infiltrate was significantly more prominent in the LD and LC groups compared to the UC group (p < .0083). CONCLUSION: Plaque accumulated on the exposed implant surface had a negative impact on maintaining the peri-implant marginal bone level, especially when there was a dehiscence defect around the implant.