ABSTRACT
PURPOSE: Although leukemic retinopathy accounts for 80% of ocular complications in acute leukemia, its pathogenesis remains unclear. To evaluate changes in retinal and choroicapillaris and structural parameters in patients with acute leukemia, we analyzed the correlation between vascular perfusion metrics and laboratory parameters and assessed the changes after hematopoietic stem cell transplantation (HSCT). METHODS: Herein, 104 eyes of 52 patients aged 18 and above with acute leukemia were enrolled. 80 eyes of 40 healthy patients were recruited as control participants. All participants underwent optical coherence tomography (OCT) and OCT angiography (OCTA) at baseline. RESULTS: Patients with acute leukemia had a significantly thicker ganglion cell-inner plexiform layer (GCIPL) and lower circularity index than the control participants. Post-HSCT perfusion metrics did not differ significantly, but parafoveal thickness decreased significantly. During the active phase of acute leukemia, lower platelet levels were associated with significant GCIPL thickening and increased foveal avascular zone and perimeter. D-dimer levels positively correlated with GCIPL thickness. CONCLUSION: Patients with acute leukemia had subclinical retinal microvascular deficits on OCTA and GCIPL thickening on OCT, possibly associated with bone marrow function. GCIPL thickness may indicate acute ischemia in such patients. Further studies must elucidate their clinical and prognostic significance.
ABSTRACT
Conventional power-integrated wireless neural recording devices suffer from bulky, rigid batteries in head-mounted configurations, hindering the precise interpretation of the subject's natural behaviors. These power sources also pose risks of material leakage and overheating. We present the direct printing of a power-integrated wireless neural recording system that seamlessly conforms to the cranium. A quasi-solid-state Zn-ion microbattery was 3D-printed as a built-in power source geometrically synchronized to the shape of a mouse skull. Soft deep-brain neural probes, interconnections, and auxiliary electronics were also printed using liquid metals on the cranium with high resolutions. In vivo studies using mice demonstrated the reliability and biocompatibility of this wireless neural recording system, enabling the monitoring of neural activities across extensive brain regions without notable heat generation. This all-printed neural interface system revolutionizes brain research, providing bio-conformable, customizable configurations for improved data quality and naturalistic experimentation.
Subject(s)
Brain , Head , Animals , Mice , Reproducibility of Results , Skull , Electronics , Wireless TechnologyABSTRACT
Current soft neural probes are still operated by bulky, rigid electronics mounted to a body, which deteriorate the integrity of the device to biological systems and restrict the free behavior of a subject. We report a soft, conformable neural interface system that can monitor the single-unit activities of neurons with long-term stability. The system implements soft neural probes in the brain, and their subsidiary electronics which are directly printed on the cranial surface. The high-resolution printing of liquid metals forms soft neural probes with a cellular-scale diameter and adaptable lengths. Also, the printing of liquid metal-based circuits and interconnections along the curvature of the cranium enables the conformal integration of electronics to the body, and the cranial circuit delivers neural signals to a smartphone wirelessly. In the in-vivo studies using mice, the system demonstrates long-term recording (33 weeks) of neural activities in arbitrary brain regions. In T-maze behavioral tests, the system shows the behavior-induced activation of neurons in multiple brain regions.
Subject(s)
Electronics , Neurons , Animals , Mice , Neurons/physiology , Brain/physiology , Skull/diagnostic imaging , Metals , Printing, Three-DimensionalABSTRACT
This study aimed to evaluate perivascular reflectivity in patients with branched retinal vascular obstruction (BRVO) using en-face optical coherence tomography (OCT). The study retrospectively analyzed 45 patients with recurrent BRVO, 30 with indolent BRVO, and 45 age- and sex-matched controls. Using a 3.0 × 3.0-mm deep capillary plexus slab on macular scans, OCT angiography (OCTA) and structural en-face OCT scans were divided into four quadrants. Obstructive quadrants of OCTA scans were binarized using a threshold value of mean + 2 standard deviation. The selected area of high signal strength (HSS) was applied to the structural en-face OCT scans, and the corrected mean perivascular reflectivity was calculated as the mean reflectivity on the HSS area/overall en-face OCT mean reflectivity. The same procedure was performed in the quadrants of the matched controls. Regression analysis was conducted on several factors possibly associated with corrected perivascular reflectivity. The perivascular reflectivity in the obstructive BRVO quadrant was significantly higher than in the indolent BRVO and control quadrants (P = 0.009, P = 0.003). Both univariate and multivariate regression analyses showed a significant correlation between the average number of intravitreal injections (anti-vascular endothelial growth factor or dexamethasone implant) per year and refractive errors and image binarization threshold and perivascular reflectivity (P = 0.011, 0.013, < 0.001/univariate; 0.007, 0.041, 0.005/multivariate, respectively). En-face OCT scans of the deep capillary plexus slab revealed higher perivascular reflectivity in recurrent BRVO eyes than in indolent BRVO and control eyes. The results also indicate a remarkable correlation between perivascular reflectivity and the average number of intravitreal injections, suggesting a link to recurrence rates.
Subject(s)
Retinal Diseases , Retinal Vein Occlusion , Retinal Vein , Humans , Tomography, Optical Coherence , Retrospective Studies , Retinal Vein Occlusion/diagnostic imagingABSTRACT
To investigate the preoperative morphology of the foveal avascular zone (FAZ) for prediction of the postoperative visual acuity in advanced idiopathic epiretinal membrane (ERM). 28 patients (28 eyes) with unilateral idiopathic ERM who underwent pars plana vitrectomy with internal limiting membrane peeling were included. Superficial FAZ was measured preoperatively in both eyes using optical coherence tomography angiography. Area, perimeter, and circularity of FAZ were achieved, and the differences between the ERM eyes and the contralateral eyes were evaluated to analyze the degree of FAZ distortion in diseased eyes. The best-corrected visual acuity (BCVA) and central foveal thickness (CFT) were measured at baseline and more than 6 months after surgery. The correlations of the preoperative FAZ with BCVA and CFT were assessed. The FAZ in the eyes with ERM was significantly reduced, and the BCVA was significantly correlated with the FAZ area (FAZa) (P = 0.001) and the FAZ perimeter (FAZp) (P < 0.001) before surgery. LogMAR BCVA and CFT were significantly improved from 0.550 ± 0.221 to 0.354 ± 0.229 (P = 0.008), and from 524.393 ± 93.575 µm to 400.071 ± 75.979 µm (P < 0.001) after surgery. The preoperative FAZa and FAZp were significantly associated with letter score gain (P < 0.001, P < 0.001) and the postoperative final BCVA (P = 0.026, P = 0.006). The preoperative FAZp had correlation with ratio of postoperative to preoperative CFT (P = 0.016). The preoperative FAZp is a predictor of visual acuity and morphological prognosis after surgery in advanced idiopathic ERM.
Subject(s)
Epiretinal Membrane , Macula Lutea , Humans , Epiretinal Membrane/diagnostic imaging , Epiretinal Membrane/surgery , Fovea Centralis/diagnostic imaging , Fovea Centralis/blood supply , Retrospective Studies , Tomography, Optical Coherence/methods , Vitrectomy/methods , Visual AcuityABSTRACT
For electrocardiogram (ECG) detection, the position of conventional patch-type electrodes based on solid-state metals are difficult to manipulate after attachment and also can lead to poor interface with stretchable, rough skin surfaces. Herein, we present a liquid form of ECG electrodes that can be magnetically reconfigured on human skin by providing its conformal interfacing. These electrodes consist of biocompatible liquid-metal droplets where magnetic particles are homogeneously dispersed, and their conformal contact with skin can yield significantly low impedance as well as high signal-to-noise ratio of ECG peaks. These electrodes are also capable of complex motions such as linear movements, splitting, and merging under external magnetic fields. Furthermore, magnetic manipulation of each electrode position on human skin enables precise monitoring of ECG signals with the change in ECG vectors. The integration of liquid-state electrodes with electronic circuitry demonstrates wireless and continuous ECG monitoring while magnetically moving this entire system on human skin.
Subject(s)
Electrocardiography , Heart , Humans , Electrodes , Monitoring, Physiologic , Metals , Electric ImpedanceABSTRACT
The purpose of this study is to evaluate choroidal hyperreflective foci (HRF) changes in central serous chorioretinopathy (CSC) on en-face optical coherence tomography (OCT). Retrospective analysis of 42 patients with unilateral CSC (84 eyes, including fellow eyes for controls) and 42 age- and sex-matched controls. With 4.5 × 4.5 mm macular scans, structural en-face OCT choriocapillaris (CC) slabs were used to calculate the density and number of HRF in acute CSC eyes with serous retinal detachment (SRD), resolved CSC eyes without SRD, unaffected fellow eyes, control eyes, and 1-year follow-up eyes. Based on the 2-disc diameter (3000 µm), the en-face OCT scan was divided into foveal and perifoveal lesion and analyzed to consider the impact of SRF in HRF measurement. Regression analyses were performed on the several factors with HRF number and density in the acute and resolved CSC eyes. The perifoveal density and number of CC HRF was significantly lower in the resolved CSC eyes when compared to the acute CSC eyes (P = 0.002, both), fellow eyes (P = 0.042/density, 0.028/number), and controls (P = 0.021/density, P = 0.003/number). There was no significant difference between the acute CSC eyes, fellow eyes, controls, and 1-year follow-up eyes. As subfoveal choroidal thickness decreased and choroidal vascularity (CVI) increased, the perifoveal density and number of HRF was measured higher with a significant correlation in univariate regression analysis of the acute and resolved CSC eyes (all, P < 0.05). The authors hypothesized that stromal edema induced by choroidal congestion and hyperpermeability has the greatest influence on HRF measurement, possibly affected by inflammatory cells and materials extravasation.
Subject(s)
Central Serous Chorioretinopathy , Retinal Detachment , Humans , Central Serous Chorioretinopathy/diagnostic imaging , Central Serous Chorioretinopathy/pathology , Tomography, Optical Coherence/methods , Retrospective Studies , Fluorescein Angiography/methods , Choroid/diagnostic imaging , Choroid/pathology , Retinal Detachment/diagnostic imaging , Retinal Detachment/pathologyABSTRACT
PURPOSE: To evaluate the choriocapillaris (CC) flow changes in branched retinal vascular obstruction (BRVO) on optical coherence tomography angiography (OCTA). METHODS: Retrospective analysis of 29 patients with unilateral BRVO (58 eyes, including unaffected fellow eyes for controls). 4.5 x 4.5 mm macular scans were divided into 4 quadrants. Serial analyses were conducted on CC flow voids of the opposite quadrant to the active occluded area in BRVO eyes. Each of the quadrants were also compared to the occluded quadrant of resolved eyes and the contralateral quadrant of fellow eyes by matched data analysis. A regression analysis was performed on the several parameters (Choroidal thickness; CT, Choroidal vascularity index; CVI, Central macular thickness; CMT, The number of intravitreal injections) and CC flow voids. RESULTS: The CC flow void increased sequentially: The uninvolved quadrant of acute BRVO-affected eyes, that of resolved eyes after 3-month/1-year, the contralateral quadrant of fellow eye, the involved (occluded) quadrant of resolved eyes. There were significant correlations between initial CMT, the number of injections and the CC flow void of uninvolved quadrants (P = 0.025, 0.031, respectively), and between the involved (occluded) quadrants and fellow CT (P = 0.029). CONCLUSION: CC flow void of uninvolved macular areas decreased significantly in eyes with acute BRVO, suggesting that CC changes were limited to the blocked area and a compensatory mechanism would work in surrounding areas.
Subject(s)
Choroid , Retinal Diseases , Humans , Fluorescein Angiography/methods , Retrospective Studies , Choroid/diagnostic imaging , Choroid/blood supply , Tomography, Optical Coherence/methodsABSTRACT
Herein, we present an unconventional method for multimodal characterization of three-dimensional cardiac organoids. This method can monitor and control the mechanophysiological parameters of organoids within a single device. In this method, local pressure distributions of human-induced pluripotent stem-cell-derived cardiac organoids are visualized spatiotemporally by an active-matrix array of pressure-sensitive transistors. This array is integrated with three-dimensional electrodes formed by the high-resolution printing of liquid metal. These liquid-metal electrodes are inserted inside an organoid to form the intraorganoid interface for simultaneous electrophysiological recording and stimulation. The low mechanical modulus and low impedance of the liquid-metal electrodes are compatible with organoids' soft biological tissue, which enables stable electric pacing at low thresholds. In contrast to conventional electrophysiological methods, this measurement of a cardiac organoid's beating pressures enabled simultaneous treatment of electrical therapeutics using a single device without any interference between the pressure signals and electrical pulses from pacing electrodes, even in wet organoid conditions.
Subject(s)
Induced Pluripotent Stem Cells , Organoids , Electrodes , Heart , Humans , MetalsABSTRACT
PURPOSE: To evaluate the choriocapillaris (CC) flow in central serous chorioretinopathy (CSC) and determine the relationship between CC flow void with the choroidal thickness (CT) and choroidal vascularity index (CVI). METHODS: Retrospective analysis of 20 patients with CSC (40 eyes, including unaffected fellow eyes) and 20 age- and sex-matched controls. After compensation with optical coherence tomography (OCT) en-face structural image, the CC flow void (%) was measured using the phansalkar threshold with a window radius of 3 and 15 pixels. The mean CC flow voids of acute CSC, recovered-acute CSC, unaffected fellow, and control eyes were compared by matched data analysis. A regression analysis was performed on the choroidal parameters (CT and CVI) and CC flow voids. RESULTS: The CC flow void had an increasing tendency in the following order: control, fellow, recovered-acute CSC, and acute CSC eyes. Acute/recovered comparison showed a significant P value (0.008) in the foveal lesion. Recovered/fellow and fellow/control presented significant P values regardless of location to fovea (all <0.05). There were significant positive correlations between CT and CC flow void (P < 0.05) in the acute CSC, recovered-acute CSC eyes. CONCLUSION: The CC flow on OCT angiography decreased in acute CSC eyes, especially in the foveal lesion, with a published compensation method. The findings suggest that unmodulated choroidal blood flow contributed to partially reversible diminished CC flow.
Subject(s)
Central Serous Chorioretinopathy , Central Serous Chorioretinopathy/diagnosis , Choroid/pathology , Fluorescein Angiography/methods , Humans , Retrospective Studies , Tomography, Optical Coherence/methodsABSTRACT
The ability to form arbitrary 3D structures provides the next level of complexity and a greater degree of freedom in the design of electronic devices. Since recent progress in electronics has expanded their applicability in various fields in which structural conformability and dynamic configuration are required, high-resolution 3D printing technologies can offer significant potential for freeform electronics. Here, the recent progress in novel 3D printing methods for freeform electronics is reviewed, with providing a comprehensive study on 3D-printable functional materials and processes for various device components. The latest advances in 3D-printed electronics are also reviewed to explain representative device components, including interconnects, batteries, antennas, and sensors. Furthermore, the key challenges and prospects for next-generation printed electronics are considered, and the future directions are explored based on research that has emerged recently.
ABSTRACT
PURPOSE: To evaluate changes in choroidal vascular structure and aqueous cytokine levels in eyes with vitreoretinal lymphoma (VRL) after intravitreal methotrexate (MTX) treatment. METHODS: In this retrospective study, VRL patients who visited our hospital between October 2018 and July 2020 were reviewed. Aqueous samples were obtained before treatment and at clinical resolution after intravitreal MTX therapy. Interleukin (IL)-6 and IL-10 levels and the IL-10-to-IL-6 ratio were evaluated. Swept-source optical coherence tomographic images were obtained along with the aqueous samples. Subfoveal choroidal thickness (SFCT), total vascular area of the choroid (TCA), stromal area (SA), luminal area (LA), and choroidal vascularity index (CVI) were assessed. RESULTS: Twelve patients were enrolled (female:male-5:7). The mean age (± standard deviation) at diagnosis was 60.9±8.5 years. In the 16 eyes diagnosed with VRL, values of SFCT, TCA, LA, and SA significantly decreased after treatment (all p-values <0.05). Additionally, the aqueous cytokine IL-10 level and IL-10-to-IL-6 ratio were significantly decreased (p = 0.001 and p = 0.003, respectively). The choroidal structure in the non-treated fellow eyes did not show any significant difference. There were no further changes in SFCT, TCA, LA, or CVI that occurred during maintenance therapy. For clinical remission, the patients received 7.7±5.5 intravitreal MTX injections. The required number of injections for clinical remission was positively correlated with best-corrected visual acuity, IL-10, and IL-6 levels in the active phase (p = 0.035, p = 0.009, and p = 0.031, respectively). CONCLUSION: Eyes with active VRL exhibited choroidal thickening with increased vascular and stromal areas that decreased after remission following MTX treatment. Higher aqueous IL-10 and IL-6 levels and lower visual acuity in the active phase may indicate the number of injections required for remission; this should be considered in the treatment of patients with VRL.
Subject(s)
Antimetabolites, Antineoplastic/therapeutic use , Choroid/blood supply , Cytokines/analysis , Lymphoma/drug therapy , Methotrexate/therapeutic use , Retinal Neoplasms/drug therapy , Aged , Antimetabolites, Antineoplastic/administration & dosage , Choroid/drug effects , Choroid/pathology , Female , Humans , Intravitreal Injections , Lymphoma/pathology , Male , Methotrexate/administration & dosage , Middle Aged , Retinal Neoplasms/pathology , Retrospective Studies , Vitreous Body/drug effects , Vitreous Body/pathologyABSTRACT
Despite recent substantial advances in perovskite materials, their 3D integration capability for next-generation electronic devices is limited owing to their inherent vulnerability to heat and moisture with degradation of their remarkable optoelectronic properties during fabrication processing. Herein, a facile method to transfer the patterns of perovskites to planar or nonplanar surfaces using a removable polymer is reported. After fabricating perovskite devices on this removable polymer film, the conformal attachment of this film on target surfaces can place the entire devices on various substrates by removing this sacrificial film. This transfer method enables the formation of a perovskite image sensor array on a soft contact lens, and in vivo tests using rabbits demonstrate its wearability. Furthermore, 3D heterogeneous integration of a perovskite photodetector array with an active-matrix array of pressure-sensitive silicon transistors using this transfer method demonstrates the formation of a multiplexed sensing platform detecting distributions of light and tactile pressure simultaneously.
ABSTRACT
Continuous detection of raised intraocular pressure (IOP) could benefit the monitoring of patients with glaucoma. Current contact lenses with embedded sensors for measuring IOP are rigid, bulky, partially block vision or are insufficiently sensitive. Here, we report the design and testing in volunteers of a soft and transparent contact lens for the quantitative monitoring of IOP in real time using a smartphone. The contact lens incorporates a strain sensor, a wireless antenna, capacitors, resistors, stretchable metal interconnects and an integrated circuit for wireless communication. In rabbits, the lens provided measurements that match those of a commercial tonometer. In ten human participants, the lens proved to be safe, and reliably provided accurate quantitative measurements of IOP without inducing inflammation.
Subject(s)
Intraocular Pressure/physiology , Monitoring, Physiologic/methods , Adult , Animals , Cattle , Cell Phone , Contact Lenses , Female , Humans , Monitoring, Physiologic/instrumentation , Printing, Three-Dimensional , Rabbits , Wireless TechnologyABSTRACT
In recent studies related to bioelectronics, significant efforts have been made to form 3D electrodes to increase the effective surface area or to optimize the transfer of signals at tissue-electrode interfaces. Although bioelectronic devices with 2D and flat electrode structures have been used extensively for monitoring biological signals, these 2D planar electrodes have made it difficult to form biocompatible and uniform interfaces with nonplanar and soft biological systems (at the cellular or tissue levels). Especially, recent biomedical applications have been expanding rapidly toward 3D organoids and the deep tissues of living animals, and 3D bioelectrodes are getting significant attention because they can reach the deep regions of various 3D tissues. An overview of recent studies on 3D bioelectronic devices, such as the use of electrical stimulations and the recording of neural signals from biological subjects, is presented. Subsequently, the recent developments in materials and fabrication processing to 3D micro- and nanostructures are introduced, followed by broad applications of these 3D bioelectronic devices at various in vitro and in vivo conditions.
Subject(s)
Wearable Electronic DevicesABSTRACT
Wearable electronic devices that can monitor physiological signals of the human body to provide biomedical information have been drawing extensive interests for sustainable personal health management. Here, we report a human pilot trial of a soft, smart contact lens and a skin-attachable therapeutic device for wireless monitoring and therapy of chronic ocular surface inflammation (OSI). As a diagnostic device, this smart contact lens enables real-time measurement of the concentration of matrix metalloproteinase-9, a biomarker for OSI, in tears using a graphene field-effect transistor. As a therapeutic device, we also fabricated a stretchable and transparent heat patch attachable on the human eyelid conformably. Both diagnostic and therapeutic devices can be incorporated using a smartphone for their wireless communications, thereby achieving instantaneous diagnosis of OSI and automated hyperthermia treatments. Furthermore, in vivo tests using live animals and human subjects confirm their good biocompatibility and reliability as a noninvasive, mobile health care solution.
ABSTRACT
Wearable healthcare devices have garnered substantial interest for the realization of personal health management by monitoring the physiological parameters of individuals. Attaining the integrity between the devices and the biological interfaces is one of the greatest challenges to achieving high-quality body information in dynamic conditions. Liquid metals, which exist in the liquid phase at room temperatures, are advanced intensively as conductors for deformable devices because of their excellent stretchability and self-healing ability. The unique surface chemistry of liquid metals allows the development of various sensors and devices in wearable form. Also, the biocompatibility of liquid metals, which is verified through numerous biomedical applications, holds immense potential in uses on the surface and inside of a living body. Here, the recent progress of liquid metal-based wearable electronic devices for healthcare with respect to the featured properties and the processing technologies is discussed. Representative examples of applications such as biosensors, neural interfaces, and a soft interconnection for devices are reviewed. The current challenges and prospects for further development are also discussed, and the future directions of advances in the latest research are explored.
Subject(s)
Biosensing Techniques , Wearable Electronic Devices , Delivery of Health Care , Electronics , Humans , MetalsABSTRACT
Despite various approaches to immunoassay and chromatography for monitoring cortisol concentrations, conventional methods require bulky external equipment, which limits their use as mobile health care systems. Here, we describe a human pilot trial of a soft, smart contact lens for real-time detection of the cortisol concentration in tears using a smartphone. A cortisol sensor formed using a graphene field-effect transistor can measure cortisol concentration with a detection limit of 10 pg/ml, which is low enough to detect the cortisol concentration in human tears. In addition, this soft contact lens only requires the integration of this cortisol sensor with transparent antennas and wireless communication circuits to make a smartphone the only device needed to operate the lens remotely without obstructing the wearer's view. Furthermore, in vivo tests using live rabbits and the human pilot experiment confirmed the good biocompatibility and reliability of this lens as a noninvasive, mobile health care solution.
ABSTRACT
There has been a great deal of interest in designing soft robots that can mimic a human system with haptic and proprioceptive functions. There is now a strong demand for soft robots that can sense their surroundings and functions in harsh environments. This is because the wireless sensing and actuating capabilities of these soft robots are very important for monitoring explosive gases in disaster areas and for moving through contaminated environments. To develop these wireless systems, complex electronic circuits must be integrated with various sensors and actuators. However, the conventional electronic circuits based on silicon are rigid and fragile, which can limit their reliable integration with soft robots for achieving continuous locomotion. In our study, we developed an untethered, soft robotic hand that mimics human fingers. The soft robotic fingers are composed of a thermally responsive elastomer composite that includes capsules of ethanol and liquid metals for its shape deformation through an electrothermal phase transition. And these soft actuators are integrated fully with flexible forms of heaters, with pressure, temperature, and hydrogen gas sensors, and wireless electronic circuits. Entire functions of this soft hand, including the gripping motion of soft robotic fingers and the real-time detections of tactile pressures, temperatures, and hydrogen gas concentrations, are monitored or controlled wirelessly using a smartphone. This wireless sensing and actuating system for somatosensory and respiratory functions of a soft robot provides a promising strategy for next-generation robotics.